Complete sequence of plasmid pLH1 from lactobacillus helveticus ATCC15009: analysis reveals the presence of regions homologous to other native plasmids from the host strain

Nucleotide sequence and analysis of pRC12 and pRC18, two theta-replicating plasmids harbored by Lactobacillus curvatus CRL 705

The nucleotide sequences of plasmids pRC12 (12,342 bp; GC 43.99%) and pRC18 (18,664 bp; GC 34.33%), harbored by the bacteriocin-producer Lactobacillus curvatus CRL 705, were determined and analyzed. Plasmids pRC12 and pRC18 share a region with high DNA identity (> 83% identity between RepA, a Type II toxin-antitoxin system and a tyrosine integrase genes) and are stably maintained in their natural host L. curvatus CRL 705. Both plasmids are low copy number and belong to the theta-type replicating group. While pRC12 is a pUCL287-like plasmid that possesses iterons and the repA and repB genes for replication, pRC18 harbors a 168 amino acid replication protein affiliated to RepB, which was named RepB'. Plasmid pRC18 also possesses a pUCL287-like repA gene but it was disrupted by an 11 kb insertion element that contains RepB', several transposases/IS elements, and the lactocin Lac705 operon. An Escherichia coli / Lactobacillus shuttle vector, named plasmid p3B1, carrying the pRC18 replicon (i.e. repB' and replication origin), a chloramphenicol resistance gene and a pBluescript backbone, was constructed and used to define the host range of RepB'. Chloramphenicol-resistant transformants were obtained after electroporation of Lactobacillus plantarum CRL 691, Lactobacillus sakei 23K and a plasmid-cured derivative of L. curvatus CRL 705, but not of L. curvatus DSM 20019 or Lactococcus lactis NZ9000. Depending on the host, transformation efficiency ranged from 102 to 107 per μg of DNA; in the new hosts, the plasmid was relatively stable as 29-53% of recombinants kept it after cell growth for 100 generations in the absence of selective pressure. Plasmid p3B1 could therefore be used for cloning and functional studies in several Lactobacillus species.

Biology of the staphylococcal conjugative multiresistance plasmid pSK41

Plasmid pSK41 is a large, low-copy-number, conjugative plasmid from Staphylococcus aureus that is representative of a family of staphylococcal plasmids that confer multiple resistances to a wide range of antimicrobial agents. The plasmid consists of a conserved plasmid backbone containing the genes for plasmid housekeeping functions, which is punctuated by copies of IS257 that flank a Tn4001-hybrid structure and cointegrated plasmids that harbour resistance genes. This review summarises the current understanding of the biology of pSK41, focussing on the systems responsible for its replication, maintenance and transmission, and their regulation.

Genetic requirements for replication initiation of the staphylococcal multiresistance plasmid pSK41

Replication of staphylococcal multiresistance plasmid pSK41 is initiated by binding of the replication initiator protein (Rep) to the Rep boxes, a series of four direct repeats located centrally within the rep gene. A Staphylococcus aureus strain was engineered to provide Rep in trans, allowing localization of the pSK41 origin of replication (oriV) to a 185 bp segment, which included the Rep boxes and a series of downstream direct repeats. Deletion analysis of individual Rep boxes revealed that all four Rep boxes are required for maximum origin activity, with the deletion of one or more Rep boxes having a significant effect on the proficiency of replication. However, a hierarchy of importance was identified among the Rep boxes, which appears to be mediated by the minor sequence variations that exist between them. DNA binding studies with truncated Rep proteins have enabled the DNA binding domain to be localized to the N-terminal 134 amino acids of the protein.

Cloning Vectors Based on Cryptic Plasmids Isolated from Lactic Acid Bacteria:Their Characteristics and Potential Applications in Biotechnology

Lactic acid bacteria (LAB) are Gram positive bacteria, widely distributed in nature, and industrially important as they are used in a variety of industrial food fermentations. The use of genetic engineering techniques is an effective means of enhancing the industrial applicability of LAB. However, when using genetic engineering technology, safety becomes an essential factor for the application of improved LAB to the food industry. Cloning and expression systems should be derived preferably from LAB cryptic plasmids that generally encode genes for which functions can be proposed, but no phenotypes can be observed. However, some plasmid-encoded functions have been discovered in cryptic plasmids originating from Lactobacillus, Streptococcus thermophilus, and Pediococcus spp. and can be used as selective marker systems in vector construction. This article presents information concerning LAB cryptic plasmids, and their structures, functions, and applications. A total of 134 cryptic plasmids collated are discussed.

The RepA_N replicons of Gram-positive bacteria: a family of broadly distributed but narrow host range plasmids

The pheromone-responsive conjugative plasmids of Enterococcus faecalis and the multiresistance plasmids pSK1 and pSK41 of Staphylococcus aureus are among the best studied plasmids native to Gram-positive bacteria. Although these plasmids seem largely restricted to their native hosts, protein sequence comparison of their replication initiator proteins indicates that they are clearly related. Homology searches indicate that these replicons are representatives of a large family of plasmids and a few phage that are widespread among the low G+C Gram-positive bacteria. We propose to name this family the RepA_N family of replicons after the annotated conserved domain that the initiator protein contains. Detailed sequence comparisons indicate that the initiator protein phylogeny is largely congruent with that of the host, suggesting that the replicons have evolved along with their current hosts and that intergeneric transfer has been rare. However, related proteins were identified on chromosomal regions bearing characteristics indicative of ICE elements, and the phylogeny of these proteins displayed evidence of more frequent intergeneric transfer. Comparison of stability determinants associated with the RepA_N replicons suggests that they have a modular evolution as has been observed in other plasmid families.

Characterization of pFMBL1, a small cryptic plasmid isolated from Leuconostoc mesenteroides SY2

A 4661bp cryptic plasmid, pFMBL1, was isolated from Leuconostoc mesenteroides SY2, an isolate from Kimchi, and characterized. Nucleotide sequence analysis revealed two open reading frames, orf1 and orf2. orf2 was 453bp in size and its translation product had 58% identity with a putative protein possibly involved in the replication of pTXL1, a cryptic plasmid from L. mesenteroides ssp. mesenteroides Y110. RNA transcript from orf2 was detected but not from orf1 or intergenic region. Minimum 3.5kb fragment encompassing orf1 and orf2 was required for the replication of pFMBL1 and employed for the construction of Escherichia coli-Leuconostoc shuttle vector, pSJ33E. L. mesenteroides SY1 (another Kimchi isolate), Leuconostoc ssp., and Lactobacillus brevis were successfully transformed with pSJ33E, and the transformation efficiencies were ranged between 1.1x10(1) and 4x10(5)transformants/microg DNA. No single-stranded DNA intermediate was detected from L. mesenteroides SY1 cells harboring pSJ33E, indicating that pFMBL1 probably replicated via theta-type mechanism. pSJ33E was stably maintained in L. mesenteroides SY1 in the absence of erythromycin (Em, 5 microg/ml) and after 1 month of daily subculturing in MRS broth without selective pressure, three percent of cells still retained pSJ33E.

Plasmids from Lactobacillus helveticus: distribution and diversity among natural isolates

AIMS

To investigate the distribution and the level of diversity of extrachromosomal molecules in Lactobacillus helveticus strains in relation to their different ecological niches.

METHODS AND RESULTS

The plasmid profile of 22 Lact. helveticus strains, isolated from five different Italian cheeses, was determined. Among the tested strains, there was a variable presence of plasmids: eight plasmid-free strains and the remaining with several plasmids that could be differentiated on the basis of number and molecular weight. The profiles showed between one and five plasmid bands, which size ranged between 2.3 and 31 kb. Four of these plasmids were further analyzed by restriction digestion and compared with the plasmids from Lact. helveticus ATCC 15009(T). Analyses and comparison of their primary structures and hybridization experiments revealed the presence of different DNA homology groups.

CONCLUSIONS

This study indicates that within Lact. helveticus species, there is a high degree of variability in relation to the presence of plasmid molecules. Moreover, the structural diversity found among some of these plasmids allows to hypothesize the presence of different evolutionary lineages.

SIGNIFICANCE AND IMPACT OF THE STUDY

Studies on plasmid distribution and diversity should be considered as an essential component in a continuing effort to explore microbial diversity as well as to understand the real role of plasmids in the flow of genetic information in natural bacterial communities.

Functional analysis of three plasmids from Lactobacillus plantarum

Lactobacillus plantarum WCFS1 harbors three plasmids, pWCFS101, pWCFS102, and pWCFS103, with sizes of 1,917, 2,365, and 36,069 bp, respectively. The two smaller plasmids are of unknown function and contain replication genes that are likely to function via the rolling-circle replication mechanism. The host range of the pWCFS101 replicon includes Lactobacillus species and Lactococcus lactis, while that of the pWCFS102 replicon also includes Carnobacterium maltaromaticum and Bacillus subtilis. The larger plasmid is predicted to replicate via the theta-type mechanism. The host range of its replicon seems restricted to L. plantarum. Cloning vectors were constructed based on the replicons of all three plasmids. Plasmid pWCFS103 was demonstrated to be a conjugative plasmid, as it could be transferred to L. plantarum NC8. It confers arsenate and arsenite resistance, which can be used as selective markers.

csp-like genes of Lactobacillus delbrueckii ssp. bulgaricus and their response to cold shock

The two csp-like genes from the lactic acid bacterium Lactobacillus delbrueckii ssp. bulgaricus were characterized and designated cspA and cspB. The gene cspA has been identified using a polymerase chain reaction (PCR)-based approach with degenerated primers and further characterized using an inverse PCR strategy. cspA encodes a protein of 65 amino acid residues which displays between 81 and 77% identity with proteins CspL and CspP of Lactobacillus plantarum. cspB has been identified as a cspA ortholog using the partial sequence of the L. bulgaricus ATCC11842. cspB encodes a protein of 69 amino acids which has 42% identity with CspA. Northern blot analyses showed that cspA is transcribed as a single gene and that its transcription increased after a temperature downshift from 42 to 25 degrees C. In contrast, cspB is part of an operon transcribed at constant level irrespective of the temperature. These results indicate that cspA encodes the only Csp-like protein of L. bulgaricus induced by a downshift of temperature.

Characterization of a theta-type plasmid from Lactobacillus sakei: a potential basis for low-copy-number vectors in lactobacilli

The complete nucleotide sequence of the 13-kb plasmid pRV500, isolated from Lactobacillus sakei RV332, was determined. Sequence analysis enabled the identification of genes coding for a putative type I restriction-modification system, two genes coding for putative recombinases of the integrase family, and a region likely involved in replication. The structural features of this region, comprising a putative ori segment containing 11- and 22-bp repeats and a repA gene coding for a putative initiator protein, indicated that pRV500 belongs to the pUCL287 subfamily of theta-type replicons. A 3.7-kb fragment encompassing this region was fused to an Escherichia coli replicon to produce the shuttle vector pRV566 and was observed to be functional in L. sakei for plasmid replication. The L. sakei replicon alone could not support replication in E. coli. Plasmid pRV500 and its derivative pRV566 were determined to be at very low copy numbers in L. sakei. pRV566 was maintained at a reasonable rate over 20 generations in several lactobacilli, such as Lactobacillus curvatus, Lactobacillus casei, and Lactobacillus plantarum, in addition to L. sakei, making it an interesting basis for developing vectors. Sequence relationships with other plasmids are described and discussed.

Advances in the genetics of thermophilic lactic acid bacteria

Molecular genetics of thermophilic lactic acid bacteria has advanced in several directions: exploitation of the milk proteins and sugars; primary and secondary metabolism; stress response; and molecular ecology of bacteria and their phages. These have singularly contributed to open new avenues of scientific interest in the field: comparative phage genomics; horizontal gene transfer events in bacterial or phage populations; and genetics of external polysaccharide production.

Replication of staphylococcal multiresistance plasmids

Based on structural and functional properties, three groups of large staphylococcal multiresistance plasmids have been recognized, viz., the pSK1 family, pSK41-like conjugative plasmids, and beta-lactamase-heavy-metal resistance plasmids. Here we describe an analysis of the replication functions of a representative of each of these plasmid groups. The replication initiation genes from the Staphylococcus aureus plasmids pSK1, pSK41, and pI9789::Tn552 were found to be related to each other and to the Staphylococcus xylosus plasmid pSX267 and are also related to rep genes of several plasmids from other gram-positive genera. Nucleotide sequence similarity between pSK1 and pI9789::Tn552 extended beyond their rep genes, encompassing upstream divergently transcribed genes, orf245 and orf256, respectively. Our analyses revealed that genes encoding proteins related to the deduced orf245 product are variously represented, in several types of organization, on plasmids possessing six seemingly evolutionarily distinct types of replication initiation genes and including both theta-mode and rolling-circle replicons. Construction of minireplicons and subsequent functional analysis demonstrated that orf245 is required for the segregational stability of the pSK1 replicon. In contrast, no gene equivalent to orf245 is evident on the conjugative plasmid pSK41, and a minireplicon encoding only the pSK41 rep gene was found to exhibit a segregational stability approaching that of the parent plasmid. Significantly, the results described establish that many of the large multiresistance plasmids that have been identified in clinical staphylococci, which were formerly presumed to be unrelated, actually utilize an evolutionarily related theta-mode replication system.