Cryo-crystallography: diffraction at low temperature and more

HTD2: a single-crystal X-ray diffractometer for combined high-pressure/low-temperature experiments at laboratory scale

High-pressure (HP) X-ray diffraction experiments at low temperature (LT) require dedicated instruments as well as non-standard sample environments and measuring strategies. This is especially true when helium cryogenic temperatures below 80 K are targeted. Furthermore, only experiments on single-crystalline samples provide the prerequisites to study subtle structural changes in the p-T phase diagram under extreme LT and HP conditions in greater detail. Due to special hardware requirements, such measurements are usually in the realm of synchrotron beamlines. This contribution describes the design of an LT/HP diffractometer (HTD2) to perform single-crystal X-ray diffraction experiments using a laboratory source in the temperature range 400 > T > 2 K while applying pressures of up to 20 GPa.

N2–O2 icing in single-crystal in-house X-ray diffraction experiments using an open-flow helium cryostat

This note reports a study of the coating of a crystal with `ice' at temperatures below 45 K during single-crystal in-house diffraction experiments when using an open-flow helium cryostat. The `ice' consists mainly of crystalline oxygen and nitrogen. This suggests completely different techniques for avoiding this type of icing compared with water icing. With appropriate choices of crystal mount, crystal position with respect to the nozzle and gas flow conditions, it is possible to avoid detectable condensation. However, sometimes this cannot be achieved in practice (poor diffraction from a smaller crystal, necessity of positioning the crystal in certain orientations to achieve desired data completeness, need to reduce helium consumption etc.). The problem of icing seems to be less common for powder experiments where the laminar gas flow is parallel to the capillary containing the sample, and for synchrotron experiments where the sample is comparatively small and almost continuously rotated, which facilitates the ice covering being removed by the gas flow. This last technique can in principle also be applied to single-crystal X-ray diffraction using laboratory diffractometers – periodic rapid rotation of the crystal can help to minimize any icing, but this technique will not work when the condensation rate is comparable to or faster than one frame of data collection. The coating around a sample crystal reduces the quality of the diffraction data, and the temperature at the sample below the coating may differ significantly from that at the cryostat nozzle reported by the instrument.

Loose crystals engineered by mismatched halogen bonds in hexachloroethane

The shortest intermolecular contacts in the engineered loose crystal of hexachloroethane are longer than the sum of van der Waals radii, reached only at the pressure of 1.2 GPa.

Serial millisecond crystallography of membrane and soluble protein microcrystals using synchrotron radiation

Crystal structure determination of biological macromolecules using the novel technique of serial femtosecond crystallography (SFX) is severely limited by the scarcity of X-ray free-electron laser (XFEL) sources. However, recent and future upgrades render microfocus beamlines at synchrotron-radiation sources suitable for room-temperature serial crystallography data collection also. Owing to the longer exposure times that are needed at synchrotrons, serial data collection is termed serial millisecond crystallography (SMX). As a result, the number of SMX experiments is growing rapidly, with a dozen experiments reported so far. Here, the first high-viscosity injector-based SMX experiments carried out at a US synchrotron source, the Advanced Photon Source (APS), are reported. Microcrystals (5-20 µm) of a wide variety of proteins, including lysozyme, thaumatin, phycocyanin, the human A2A adenosine receptor (A2AAR), the soluble fragment of the membrane lipoprotein Flpp3 and proteinase K, were screened. Crystals suspended in lipidic cubic phase (LCP) or a high-molecular-weight poly(ethylene oxide) (PEO; molecular weight 8 000 000) were delivered to the beam using a high-viscosity injector. In-house data-reduction (hit-finding) software developed at APS as well as the SFX data-reduction and analysis software suites Cheetah and CrystFEL enabled efficient on-site SMX data monitoring, reduction and processing. Complete data sets were collected for A2AAR, phycocyanin, Flpp3, proteinase K and lysozyme, and the structures of A2AAR, phycocyanin, proteinase K and lysozyme were determined at 3.2, 3.1, 2.65 and 2.05 Å resolution, respectively. The data demonstrate the feasibility of serial millisecond crystallography from 5-20 µm crystals using a high-viscosity injector at APS. The resolution of the crystal structures obtained in this study was dictated by the current flux density and crystal size, but upcoming developments in beamline optics and the planned APS-U upgrade will increase the intensity by two orders of magnitude. These developments will enable structure determination from smaller and/or weakly diffracting microcrystals.