Mechanisms and Kinetics of Amyloid Aggregation Investigated by a Phenomenological Coarse-Grained Model

Delving into the crucial role of the initial structure in the dynamic and self-assembly of amyloid beta

Alzheimer's disease involves the accumulation of amyloid beta (Aβ) monomers that form oligomers and fibrils in the brain. Studying the Aβ monomer is critical for understanding Aβ assembly and peptide behavior and has implications for drug design. Choosing a starting structure with a higher aggregation tendency for cost-effective MD studies and drug design is crucial. Previous studies have utilized distinct initial conformations, leading to varying results. Hence, this study was conducted to compare different initial conformations using the same MD simulation protocol to investigate the behavior and oligomerization propensity of different starting structures of Aβ during 1μs. The behavior of the monomers and their self-assembly systems were studied thoroughly, and the results revealed that highly helical Aβ monomers which used as starting structures retain high helix content during the simulation, and their tautomerization states did not cause significant changes in the structure. On the other hand, the Aβ extended and S-shaped monomers displayed the fingerprints of the fibril structure, which is believed to be more favorable for self-assembly. Self-assembly behaviors were seen for three S-shaped and three Aβ extended peptides. However, both conformations did not show stable β-sheet intermolecular interaction. For the Aβ16-22 monomer as a fragment of the Aβ that can assemble into fibrils, the impacts of capping and uncapping on the initial structure were also investigated. The results displayed that capped and uncapped structures can form oligomers with β-sheet at termini. However, in the capped state, β-sheet interactions were more stable and remained relatively longer than uncapped.

Side Chain Geometry Determines the Fibrillation Propensity of a Minimal Two-Beads-per-Residue Peptide Model

The molecular mechanism of fibrillation is an important issue for understanding peptide aggregation. In our previous work, we demonstrated that the interchain attraction and intrachain bending stiffness control the aggregation kinetics and transient aggregate morphologies of a one-bead-per-residue implicit solvent peptide model. However, that model did not lead to fibrillation. In this work, we study the molecular origin of fibril formation using a two-beads-per-residue model, where one bead represents the backbone residue atoms and the other the side chain atoms. We show that the side chain geometry determines the fibrillation propensity that is further modulated by the modified terminal beads. This allows us to bring out the effects of side chain geometry and terminal capping on the fibrillation propensity. Our model does not assume a secondary structure and is, perhaps, the simplest bead-based chain model leading to fibrillation.

Scan-Find-Scan-Model: Discrete Site-Targeted Suppressor Design Strategy for Amyloid-β

Alzheimer's disease is undoubtedly the most well-studied neurodegenerative disease. Consequently, the amyloid-β (Aβ) protein ranks at the top in terms of getting attention from the scientific community for structural property-based characterization. Even after decades of extensive research, there is existing volatility in terms of understanding and hence the effective tackling procedures against the disease that arises due to the lack of knowledge of both specific target- and site-specific drugs. Here, we develop a multidimensional approach based on the characterization of the common static-dynamic-thermodynamic trait of the monomeric protein, which efficiently identifies a small target sequence that contains an inherent tendency to misfold and consequently aggregate. The robustness of the identification of the target sequence comes with an abundance of a priori knowledge about the length and sequence of the target and hence guides toward effective designing of the target-specific drug with a very low probability of bottleneck and failure. Based on the target sequence information, we further identified a specific mutant that showed the maximum potential to act as a destabilizer of the monomeric protein as well as enormous success as an aggregation suppressor. We eventually tested the drug efficacy by estimating the extent of modulation of binding affinity existing within the fibrillar form of the Aβ protein due to a single-point mutation and hence provided a proof of concept of the entire protocol.

Atomistic Modeling of Peptide Aggregation and β-Sheet Structuring in Corn Zein for Viscoelasticity

The structure-function relationships of plant-based proteins that give rise to desirable texture attributes in order to mimic meat products are generally unknown. In particular, it is not clear how to engineer viscoelasticity to impart cohesiveness and proper mouthfeel; however, it is known that intermolecular β-sheet structures have the potential to enhance the viscoelastic property. Here, we investigated the propensity of selected peptide segments within common corn α-zein variants to maintain stable aggregates and β-sheet structures. Simulations on dimer systems showed that stability was influenced by the initial orientation and the presence of contiguous small hydrophobic residues. Simulations using eight-peptide β-sheet oligomers revealed that peptide sequences without proline had higher levels of β-sheet structuring. Additionally, we identified that sequences with a dimer hydrogen-bonding density of >22% tended to have a larger percent β-sheet conformation. These results contribute to understanding how the viscoelasticity of zein can be increased for use in plant-based meat analogues.

Interactions between Curcumin Derivatives and Amyloid-β Fibrils: Insights from Molecular Dynamics Simulations

The aggregation of amyloid-β (Aβ) peptides into senile plaques is a hallmark of Alzheimer's disease (AD) and is hypothesized to be the primary cause of AD related neurodegeneration. Previous studies have shown the ability of curcumin to both inhibit the aggregation of Aβ peptides into oligomers or fibrils and reduce amyloids in vivo. Despite the promise of curcumin and its derivatives to serve as diagnostic, preventative, and potentially therapeutic AD molecules, the mechanism by which curcumin and its derivatives bind to and inhibit Aβ fibrils' formation remains elusive. Here, we investigated curcumin and a set of curcumin derivatives in complex with a hexamer peptide model of the Aβ1-42 fibril using nearly exhaustive docking, followed by multi-ns molecular dynamics simulations, to provide atomistic-detail insights into the molecules' binding and inhibitory properties. In the vast majority of the simulations, curcumin and its derivatives remain firmly bound in complex with the fibril through primarily three different principle binding modes, in which the molecules interact with residue domain 17LVFFA21, in line with previous experiments. In a small subset of these simulations, the molecules partly dissociate the outermost peptide of the Aβ1-42 fibril by disrupting β-sheets within the residue domain 12VHHQKLVFF20. A comparison between binding modes leading or not leading to partial dissociation of the outermost peptide suggests that the latter is attributed to a few subtle key structural and energetic interaction-based differences. Interestingly, partial dissociation appears to be either an outcome of high affinity interactions or a cause leading to high affinity interactions between the molecules and the fibril, which could partly serve as a compensation for the energy loss in the fibril due to partial dissociation. In conjunction with this, we suggest a potential inhibition mechanism of Αβ1-42 aggregation by the molecules, where the partially dissociated 16KLVFF20 domain of the outermost peptide could either remain unstructured or wrap around to form intramolecular interactions with the same peptide's 29GAIIG33 domain, while the molecules could additionally act as a patch against the external edge of the second outermost peptide's 16KLVFF20 domain. Thereby, individually or concurrently, these could prohibit fibril elongation.

Assembly of Triblock Amphiphilic Peptides into One-Dimensional Aggregates and Network Formation

Peptide assembly plays a key role in both neurological diseases and development of novel biomaterials with well-defined nanostructures. Synthetic model peptides provide a unique platform to explore the role of intermolecular interactions in the assembly process. A triblock peptide architecture designed by the Hartgerink group is a versatile system which relies on Coulomb interactions, hydrogen bonding, and hydrophobicity to guide these peptides' assembly at three different length scales: β-sheets, double-wall ribbon-like aggregates, and finally a highly porous network structure which can support gels with ≤1% by weight peptide concentration. In this study, by using molecular dynamics simulations of a structure based implicit solvent coarse grained model, we analyzed this hierarchical assembly process. Parametrization of our CG model is based on multiple-state points from atomistic simulations, which enables this model to represent the conformational adaptability of the triblock peptide molecule based on the surrounding medium. Our results indicate that emergence of the double-wall β-sheet packing mechanism, proposed in light of the experimental evidence, strongly depends on the subtle balance of the intermolecular forces. We demonstrate that, even though backbone hydrogen bonding dominates the early nucleation stages, depending on the strength of the hydrophobic and Coulomb forces, alternative structures such as zero-dimensional aggregates with two β-sheets oriented orthogonally (which we refer to as a cross-packed structure) and β-sheets with misoriented hydrophobic side chains are also feasible. We discuss the implications of these competing structures for the three different length scales of assembly by systematically investigating the influence of density, counterion valency, and hydrophobicity.

β-sheet propensity controls the kinetic pathways and morphologies of seeded peptide aggregation

The effect of seeds in templating the morphology of peptide aggregates is examined using molecular dynamics simulations and a coarse-grained peptide representation. Varying the nature of the aggregate seed between β-sheet, amorphous, and β-barrel seeds leads to different aggregation pathways and to morphologically different aggregates. Similar effects are seen by varying the β-sheet propensity of the free peptides. For a fibrillar seed and free peptides of high β-sheet propensity, fibrillar growth occurred by means of direct attachment (without structural rearrangement) of free individual peptides and small ordered oligomers onto the seed. For a fibrillar seed and free peptides of low β-sheet propensity, fibrillar growth occurred through a dock-lock mechanism, in which the free peptides first docked onto the seed, and then locked on, extending and aligning to join the fibril. Amorphous seeds absorbed free peptides into themselves indiscriminately, with any fibrillar rearrangement subsequent to this absorption by means of a condensation-ordering transition. Although the mechanisms observed by varying peptide β-sheet propensity are diverse, the initial pathways can always be broken down into the following steps: (i) the free peptides diffuse in the bulk and attach individually to the seed; (ii) the free peptides diffuse and aggregate among themselves; (iii) the free peptide oligomers collide with the seed; and (iv) the free oligomers merge with the seed and rearrange in a manner dependent on the backbone flexibility of both the free and seed peptides. Our simulations indicate that it is possible to sequester peptides from amorphous aggregates into fibrils, and also that aggregate morphology (and thus cytoxicity) can be controlled by introducing seeds of aggregate-compatible peptides with differing β-sheet propensities into the system.

Role of β-hairpin formation in aggregation: the self-assembly of the amyloid-β(25-35) peptide

The amyloid-β(25-35) peptide plays a key role in the etiology of Alzheimer's disease due to its extreme toxicity even in the absence of aging. Because of its high tendency to aggregate and its low solubility in water, the structure of this peptide is still unknown. In this work, we sought to understand the early stages of aggregation of the amyloid-β(25-35) peptide by conducting simulations of oligomers ranging from monomers to tetramers. Our simulations show that although the monomer preferentially adopts a β-hairpin conformation, larger aggregates have extended structures, and a clear transition from compact β-hairpin conformations to extended β-strand structures occurs between dimers and trimers. Even though β-hairpins are not present in the final architecture of the fibril, our simulations indicate that they play a critical role in fibril growth. Our simulations also show that β-sheet structures are stabilized when a β-hairpin is present at the edge of the sheet. The binding of the hairpin to the sheet leads to a subsequent destabilization of the hairpin, with part of the hairpin backbone dangling in solution. This free section of the peptide can then recruit an extra monomer from solution, leading to further sheet extension. Our simulations indicate that the peptide must possess sufficient conformational flexibility to switch between a hairpin and an extended conformation in order for β-sheet extension to occur, and offer a rationalization for the experimental observation that overstabilizing a hairpin conformation in the monomeric state (for example, through chemical cross-linking) significantly hampers the fibrillization process.