Stem Cells in Osteochondral Tissue Engineering

Talar OsteoPeriostic grafting from the Iliac Crest (TOPIC) for lateral osteochondral lesions of the talus: operative technique

OBJECTIVE

To provide a natural scaffold, good quality cells, and growth factors to facilitate replacement of the complete osteochondral unit with matching talar curvature for large osteochondral lesions of the lateral talar dome.

INDICATIONS

Symptomatic primary and non-primary lateral osteochondral lesions of the talus not responding to conservative treatment. The anterior-posterior or medial-lateral diameter should exceed 10 mm on computed tomography (CT) for primary lesions; for secondary lesions, there are no size limitations.

CONTRAINDICATIONS

Tibiotalar osteoarthritis grade III, malignancy, active infectious ankle joint pathology, and hemophilic or other diffuse arthropathy.

SURGICAL TECHNIQUE

Anterolateral arthrotomy is performed after which the Anterior TaloFibular Ligament (ATFL) is disinserted from the fibula. Additional exposure is achieved by placing a Hintermann distractor subluxating the talus ventrally. Thereafter, the osteochondral lesion is excised in toto from the talar dome. The recipient site is micro-drilled in order to disrupt subchondral bone vessels. Thereafter, the autograft is harvested from the ipsilateral iliac crest with an oscillating saw, after which the graft is adjusted to an exactly fitting shape to match the extracted lateral osteochondral defect and the talar morphology as well as curvature. The graft is implanted with a press-fit technique after which the ATFL is re-inserted followed by potential augmentation with an InternalBrace™ (Arthrex, Naples, FL, USA).

POSTOPERATIVE MANAGEMENT

Non-weightbearing cast for 6 weeks, followed by another 6 weeks with a walking boot. After 12 weeks, a computed tomography (CT) scan is performed to assess consolidation of the inserted autograft. The patient is referred to a physiotherapist.

Morphology Comparison Between Goat Bone Marrow Mesenchymal Stem Cells and Adhesive Fibrin for the Repair of Annulus Fibrosus Defect of Intervertebral Discs

Introduction: The purpose of this study was to compare the histological findings of goat bone marrow mesenchymal stem cell (BMSC) transplantation and adhesive fibrin repair for annulus fibrosus defects in intervertebral discs. Material and methods: The goats were spanided into three groups: the control group, the adhesive group and the transplantation group. In the control group, surgical instruments were used to create a fibrous ring defect in the intervertebral disc of the goats. In the adhesive group, a 1.5*1.5-cm defect was also created by surgical intervention, and the broken fiber ring was then bonded with adhesive fibrin. In the transplantation group, a gelatine sponge containing the goat BMSCs was implanted into the broken annulus fibrosus, and the wound was closed layer by layer. At 6 weeks and 12 weeks after the operation, the damaged tissues were removed, and haematoxylin and eosin (HE), trichrome gelatine (Masson), Alcian blue periodic acid-Schiff (AB-PAS) and Collagen II staining was performed. Then, the tissues from the different groups were histologically compared and analyzed. Results: Goat BMSCs have a better ability to repair defects in the fibrous ring than adhesive fibrin. Over time, the number of cells or the amount of tissue following cell transplantation was greater, indicating that the degree of repair is greater with BMSCs than with adhesive fibrin. Conclusion: Histologically, repair of the defect of the fibrous ring and prevention of nucleus pulposus protrusion were more effective in the cell transplantation group than in the other two groups.

The Potential Function of Super Enhancers in Human Bone Marrow Mesenchymal Stem Cells during Osteogenic Differentiation

Super enhancers (SEs) are large clusters of transcriptional activity enhancers, which drive and control the expression of cell identity genes, as well as differentiation of specific cell types. SEs have great application potential in pathogenic mechanism studies in developmental biology, cancer, and other diseases. However, the potential function and regulatory mechanism of SEs in the osteogenic differentiation of human bone marrow mesenchymal stem cells (hBMSCs) are unknown. Therefore, this study investigated the potential function of SEs in the osteogenic differentiation of hBMSCs and their target genes. Osteogenesis was induced in three hBMSCs groups for 14 days. Further, ChIP-seq was performed on cells before and after osteogenic differentiation. Two target genes were then selected from cells before and after osteogenic differentiation for RT-qPCR. Finally, the selected SE target genes were analyzed by bioinformatics. In total, 1,680 SEs were identified in hBMSCs. After 14 days of osteogenic induction, only 342 SEs were detected in cells, among which 1,380 unique SEs were detected in hBMSCs, 42 unique SEs were found in cells induced by osteoblast differentiation after 14 days, and 300 SEs were common in both groups. Further, 1,680 genes were found to be regulated by SEs in hBMSCs, including 1,094 genes with protein-coding function and 586 noncoding genes. Additionally, 342 genes were regulated by SEs in cells after 14 days of osteogenic differentiation induction, of which 223 and 119 had protein-coding and noncoding functions, respectively. KEGG analysis of SE target genes before and after osteogenic differentiation showed the TGF-β, PI3K-Akt, and ECM receptor signaling pathways as highly enriched and closely related to osteogenic differentiation. Further, RT-qPCR results of four selected target genes confirmed the sequencing results. Taken together, osteogenic differentiation of hBMSCs involves changes in multiple SEs, which may regulate the osteogenic differentiation of hBMSCs by regulating the expression of target genes.

Innovative Tissue-Engineered Strategies for Osteochondral Defect Repair and Regeneration: Current Progress and Challenges

Clinical treatments for the repair of osteochondral defects (OCD) are merely palliative, not completely curative, and thus enormously unfulfilled challenges. With the in-depth studies of biology, medicine, materials, and engineering technology, the conception of OCD repair and regeneration should be renewed. During the past decades, many innovative tissue-engineered approaches for repairing and regenerating damaged osteochondral units have been widely explored. Various scaffold-free and scaffold-based strategies, such as monophasic, biphasic, and currently fabricated multiphasic and gradient architectures have been proposed and evaluated. Meanwhile, progenitor cells and tissue-specific cells have also been intensively investigated in vivo as well as ex vivo. Concerning bioactive factors and drugs, they have been combined with scaffolds and/or living cells, and even released in a spatiotemporally controlled manner. Although tremendous progress has been achieved, further research and development (R&D) is needed to convert preclinical outcomes into clinical applications. Here, the osteochondral unit structure, its defect classifications, and diagnosis are summarized. Commonly used clinical reparative techniques, tissue-engineered strategies, emerging 3D-bioprinting technologies, and the status of their clinical applications are discussed. Existing challenges to translation are also discussed and potential solutions for future R&D directions are proposed.

Safety Considerations in 3D Bioprinting Using Mesenchymal Stromal Cells

Three-dimensional (3D) bioprinting has demonstrated great potential for the fabrication of biomimetic human tissues and complex graft materials. This technology utilizes bioinks composed of cellular elements placed within a biomaterial. Mesenchymal stromal cells (MSCs) are an attractive option for cell selection in 3D bioprinting. MSCs can be isolated from a variety of tissues, can pose vast proliferative capacity and can differentiate to multiple committed cell types. Despite their promising properties, the use of MSCs has been associated with several drawbacks. These concerns are related to the ex vivo manipulation throughout the process of 3D bioprinting. The herein manuscript aims to present the current evidence surrounding these events and propose ways to minimize the risks to the patients following widespread expansion of 3D bioprinting in the medical field.

Talar OsteoPeriostic grafting from the Iliac Crest (TOPIC) for large medial talar osteochondral defects : Operative technique

Objective

Provision of a natural scaffold, good quality cells, and growth factors in order to facilitate the replacement of the complete osteochondral unit with matching talar curvature for large medial primary and secondary osteochondral defects of the talus.

Indications

Symptomatic primary and secondary medial osteochondral defects of the talus not responding to conservative treatment; anterior–posterior or medial–lateral diameter >10 mm on computed tomography (CT); closed distal tibial physis in young patients.

Contraindications

Tibiotalar osteoarthritis grade III; multiple osteochondral defects on the medial, central, and lateral talar dome; malignancy; active infectious ankle joint pathology.

Surgical technique

A medial distal tibial osteotomy is performed, after which the osteochondral defect is excised in toto from the talar dome. The recipient site is microdrilled in order to disrupt subchondral bone vessels. Then, the autograft is harvested from the ipsilateral iliac crest with an oscillating saw, after which the graft is adjusted to an exact fitting shape to match the extracted osteochondral defect and the talar morphology as well as curvature. The graft is implanted with a press-fit technique after which the osteotomy is reduced with two 3.5 mm lag screws and the incision layers are closed. In cases of a large osteotomy, an additional third tubular buttress plate is added, or a third screw at the apex of the osteotomy.

Postoperative management

Non-weight bearing cast for 6 weeks, followed by another 6 weeks with a walking boot. After 12 weeks, a CT scan is performed to assess consolidation of the osteotomy and the inserted autograft. The patient is referred to a physiotherapist.

Results

Ten cases underwent the TOPIC procedure, and at 1 year follow-up all clinical scores improved. Radiological outcomes showed consolidation of all osteotomies and all inserted grafts showed consolidation. Complications included one spina iliaca anterior avulsion and one hypaesthesia of the saphenous nerve; in two patients the fixation screws of the medial malleolar osteotomy were removed.

[Experimental study on autologous injectable platelets rich fibrin combined with bone mesenchymal stem cells in treating sciatic nerve injury in rats]

Objective

To investigate the effectiveness of autologous injectable platelet rich fibrin (i-PRF) combined with bone marrow mesenchymal stem cells (BMSCs) for sciatic nerve injury in rats.

Methods

BMSCs were isolated and cultured from tibial bone marrow of Sprague Dawley (SD) neonatal rats aged 10-15 days and passaged to the 4th generation. i-PRF was prepared from posterior orbital venous blood of adult SD rats by improved low-speed centrifugation. Twenty-four adult SD rats were selected and randomly divided into 4 groups with 6 rats in each group after the sciatic nerve Ⅲ degree injury model was established by modified crush injury method. Groups A, B, C, and D were injected with BMSCs suspension+autologous i-PRF, autologous i-PRF, BMSCs suspension, and normal saline, respectively. The Basso-Beattie-Bresnahan (BBB) score was used to evaluate the recovery of neurological function of the affected limb of rats every week from 1 to 8 weeks after operation. At 2 months after operation, the rats were sacrificed and the histological changes of sciatic nerve were observed by HE staining. The microstructural changes of nerve fibers, myelin sheath, and nucleus were observed by transmission electron microscope. The expressions of N-cadherin, Nestin, and glial fibrillary acidic protein (GFAP) were detected by Western blot.

Results

No immune rejection or death occurred in the rats after operation. There was no significant difference in BBB scores between groups at 1 week after operation ( P>0.05); at 2-8 weeks after operation, BBB scores in group A were significantly higher than those in groups B, C, and D, and in groups B, C than in group D ( P<0.05), there was no significant difference between groups B and C ( P>0.05). HE staining showed that the nerve fibers in group A arranged in order, without defect or demyelination; the nerve fibers in group B were not clear and slightly swollen; some of the nerve fibers in group C were disordered and demyelinated; the nerve fibers in group D were not continuous, obviously demyelinated, and some of the nerve adventitia damaged. Transmission electron microscope showed that the structure of nerve fibers in group A was clear, myelin sheath was complete, and nucleus was dense; group B was slightly less than group A; group C had fuzzy structure, demyelination, and hollowing out; group D had disorder structure, demyelination, and hollowing out, and the middle part of nerve adventitia continuity. Western blot detection results showed that there was no significant difference in the relative expression of Nestin between groups ( P>0.05). The relative expression of N-cadherin was significantly lower in groups B, C, and D than in group A, in groups C and D than in group B, and in group D than in group C ( P<0.05). The relative expression of GFAP was significantly lower in groups B, C, and D than in group A, in group D than in groups B and C ( P<0.05); there was no significant difference between groups B and C ( P>0.05).

Conclusion

Autologous i-PRF combined with BMSCs can effectively treat sciatic nerve tissue injury in rats.

ESC Working Group on Cellular Biology of the Heart: position paper for Cardiovascular Research: tissue engineering strategies combined with cell therapies for cardiac repair in ischaemic heart disease and heart failure

Morbidity and mortality from ischaemic heart disease (IHD) and heart failure (HF) remain significant in Europe and are increasing worldwide. Patients with IHD or HF might benefit from novel therapeutic strategies, such as cell-based therapies. We recently discussed the therapeutic potential of cell-based therapies and provided recommendations on how to improve the therapeutic translation of these novel strategies for effective cardiac regeneration and repair. Despite major advances in optimizing these strategies with respect to cell source and delivery method, the clinical outcome of cell-based therapy remains unsatisfactory. Major obstacles are the low engraftment and survival rate of transplanted cells in the harmful microenvironment of the host tissue, and the paucity or even lack of endogenous cells with repair capacity. Therefore, new ways of delivering cells and their derivatives are required in order to empower cell-based cardiac repair and regeneration in patients with IHD or HF. Strategies using tissue engineering (TE) combine cells with matrix materials to enhance cell retention or cell delivery in the transplanted area, and have recently received much attention for this purpose. Here, we summarize knowledge on novel approaches emerging from the TE scenario. In particular, we will discuss how combinations of cell/bio-materials (e.g. hydrogels, cell sheets, prefabricated matrices, microspheres, and injectable matrices) combinations might enhance cell retention or cell delivery in the transplantation areas, thereby increase the success rate of cell therapies for IHD and HF. We will not focus on the use of classical engineering approaches, employing fully synthetic materials, because of their unsatisfactory material properties which render them not clinically applicable. The overall aim of this Position Paper from the ESC Working Group Cellular Biology of the Heart is to provide recommendations on how to proceed in research with these novel TE strategies combined with cell-based therapies to boost cardiac repair in the clinical settings of IHD and HF.

Therapeutic "Tool" in Reconstruction and Regeneration of Tissue Engineering for Osteochondral Repair

Repairing osteochondral defects to restore joint function is a major challenge in regenerative medicine. However, with recent advances in tissue engineering, the development of potential treatments is promising. In recent years, in addition to single-layer scaffolds, double-layer or multilayer scaffolds have been prepared to mimic the structure of articular cartilage and subchondral bone for osteochondral repair. Although there are a range of different cells such as umbilical cord stem cells, bone marrow mesenchyml stem cell, and others that can be used, the availability, ease of preparation, and the osteogenic and chondrogenic capacity of these cells are important factors that will influence its selection for tissue engineering. Furthermore, appropriate cell proliferation and differentiation of these cells is also key for the optimal repair of osteochondral defects. The development of bioreactors has enhanced methods to stimulate the proliferation and differentiation of cells. In this review, we summarize the recent advances in tissue engineering, including the development of layered scaffolds, cells, and bioreactors that have changed the approach towards the development of novel treatments for osteochondral repair.

Osteochondral tissue regenerated via a strategy by stacking pre-differentiated BMSC sheet on fibrous mesh in a gradient

The reconstruction of osteochondral tissue remains a challenging task in clinical therapy because of its heterogeneous structure. The best way to face the challenge is to develop a biomimetic construct to mimic the multilayered gradient from cartilage, to calcified cartilage and subchondral bone. In this study, bone marrow mesenchymal stromal cells (BMSCs) were cultured on electrospun fibrous meshes and cell sheets were incubated. The fibrous meshes were composed of 50% poly(L-lactide) and 50% gelatin, displaying excellent biocompatibility, cell affinity and degradability. Differentiation of BMSC sheets on fibrous meshes was induced chondrogenically or osteogenically. In particular, the BMSC sheets were able to be efficiently induced differentiating towards calcified cartilage by using a 1:1 (v/v) mixed medium of chondrogenic and osteogenic inductive media. Thus, a gradient 3D construct was built by stacking the differently pre-differentiated cell/mesh complexes layer by layer from top to bottom to mimic the cartilage-to-bone transition. With this gradient construct being implanted in the rabbit knee osteochondral defect, it was confirmed that it could promote the tissue regeneration with intact cartilage layer formation in comparison with the multilayered construct without a gradient. The strategy of using properly pre-differentiated BMSC sheet on fibrous mesh to build the osteochondral interface was thus suggested as being feasible and effective in mimicking its hierarchical complexity, and favored the repairing of injured joint cartilage.