Functional relationship among TATA sequences, gene induction and transcription initiation in the beta-galactosidase, LAC4, gene from Kluyveromyces lactis

Promoter and signal sequence from filamentous fungus can drive recombinant protein production in the yeast Kluyveromyces lactis

Cross-recognition of promoters from filamentous fungi in yeast can have important consequences towards developing fungal expression systems, especially for the rapid evaluation of their efficacy. A truncated 510bp inducible Trichoderma reesei cellobiohydrolase I (cbh1) promoter was tested for the expression of green fluorescent protein (GFP) in Kluyveromyces lactis after disrupting its native β-galactosidase (lac4) promoter. The efficiency of the CBH1 secretion signal was also evaluated by fusing it to the lac4 promoter of the yeast, which significantly increased the secretion of recombinant protein in K. lactis compared to the native α-mating factor secretion signal. The fungal promoter is demonstrated to have potential to drive heterologous protein production in K. lactis; and the small sized T. reesei cbh1 secretion signal can mediate the protein secretion in K. lactis with high efficiency.

Kluyveromyces lactis LAC4 promoter variants that lack function in bacteria but retain full function in K. lactis

The strong LAC4 promoter (P(LAC4)) from Kluyveromyces lactis has been extensively used to drive expression of heterologous proteins in this industrially important yeast. A drawback of this expression method is the serendipitous ability of P(LAC4) to promote gene expression in Escherichia coli. This can interfere with the process of assembling expression constructs in E. coli cells prior to their introduction into yeast cells, especially if the cloned gene encodes a protein that is detrimental to bacteria. In this study, we created a series of P(LAC4) variants by targeted mutagenesis of three DNA sequences (PBI, PBII, and PBIII) that resemble the E. coli Pribnow box element of bacterial promoters and that reside immediately upstream of two E. coli transcription initiation sites associated with P(LAC4). Mutation of PBI reduced the bacterial expression of a reporter protein (green fluorescent protein [GFP]) by approximately 87%, whereas mutation of PBII and PBIII had little effect on GFP expression. Deletion of all three sequences completely eliminated GFP expression. Additionally, each promoter variant expressed human serum albumin in K. lactis cells to levels comparable to wild-type P(LAC4). We created a novel integrative expression vector (pKLAC1) containing the P(LAC4) variant lacking PBI and used it to successfully clone and express the catalytic subunit of bovine enterokinase, a protease that has historically been problematic in E. coli cells. The pKLAC1 vector should aid in the cloning of other potentially toxic genes in E. coli prior to their expression in K. lactis.

Coregulation of the Kluyveromyces lactis lactose permease and beta-galactosidase genes is achieved by interaction of multiple LAC9 binding sites in a 2.6 kbp divergent promoter

The coregulated genes LAC4 and LAC12 encoding beta-galactosidase and lactose permease, respectively, are responsible for the ability of the milk yeast Kluyveromyces lactis to utilise lactose. They are divergently transcribed and separated by an unusually large intergenic region of 2.6 kbp. Mapping of the upstream border of the beta-galactosidase gene (LAC4) promoter by introduction of mutations at the chromosomal locus showed that LAC4 and LAC12 share the same upstream activation sites (UAS). The UASs represent binding sites for the trans-activator LAC9, a K. lactis homologue of GAL4, conforming to the consensus sequence 5'-CGG(N5)A/T(N5)CCG-3'. Two binding sites are located in front of each of the genes at almost symmetrical positions. beta-galactosidase activity measurements as well as quantitation of LAC4 and LAC12 mRNA levels demonstrated that all four sites are required for full induction. LAC4 proximal and a LAC12 proximal sites cooperate in activating transcription of both genes. These sites are more than 1.7 kbp apart and the distal site is located more than 2.3 kbp upstream of the respective start of transcription. Thus, the distance between interacting sites is larger than in any of the well characterised yeast promoters. The contribution to gene activation differs for individual binding sites and correlates with the relative affinity of LAC9 for these sites in vitro suggesting that LAC9 binding is a rate limiting step for LAC promoter function.

Two types of TATA elements for the CYC1 gene of the yeast Saccharomyces cerevisiae

Functional TATA elements in the 5' untranslated region of the CYC1 gene in the yeast Saccharomyces cerevisiae have been defined by transcriptional analysis of site-directed mutations. Five sites previously suggested to contain functional TATA elements were altered individually and in all possible combinations. The results indicated that only two elements are required for transcription at the normal level and the normal start sites. The two functional TATA elements are located at sites -178 and -123, where the A of the ATG start codon is assigned nucleotide position +1. They direct initiation within windows encompassing -70 to -46 and -46 to -28, respectively. Only when both of the upstream TATA sites were rendered nonfunctional were the third and fourth downstream TATA-like sequences activated, as indicated by the presence of low levels of transcription starting at -28. The two upstream functional TATA elements differed in sequence. The sequence of the most 5' one at site 1, denoted beta-type, was ATATATATAT, whereas that of the second one at site 2, denoted alpha-type, was TATATAAAA. The following rearrangements of the beta-type and alpha-type elements at two sites (1 and 2) were examined: site1 beta-site2 alpha; site 1 alpha-site 2 beta; site1 alpha-site2 alpha; and site1 beta-site2 beta. When different types were at different sites (site1 beta-site2 alpha and site1 alpha-site2 beta), both were used equally. In contrast, when the same type was present at both sites (site1 alpha-site2 alpha and site1 beta-site2 beta), only the upstream element was used. We suggest that the two TATA elements are recognized by different factors of the transcription apparatus.

Two types of TATA elements for the CYC1 gene of the yeast Saccharomyces cerevisiae

Functional TATA elements in the 5' untranslated region of the CYC1 gene in the yeast Saccharomyces cerevisiae have been defined by transcriptional analysis of site-directed mutations. Five sites previously suggested to contain functional TATA elements were altered individually and in all possible combinations. The results indicated that only two elements are required for transcription at the normal level and the normal start sites. The two functional TATA elements are located at sites -178 and -123, where the A of the ATG start codon is assigned nucleotide position +1. They direct initiation within windows encompassing -70 to -46 and -46 to -28, respectively. Only when both of the upstream TATA sites were rendered nonfunctional were the third and fourth downstream TATA-like sequences activated, as indicated by the presence of low levels of transcription starting at -28. The two upstream functional TATA elements differed in sequence. The sequence of the most 5' one at site 1, denoted beta-type, was ATATATATAT, whereas that of the second one at site 2, denoted alpha-type, was TATATAAAA. The following rearrangements of the beta-type and alpha-type elements at two sites (1 and 2) were examined: site1 beta-site2 alpha; site 1 alpha-site 2 beta; site1 alpha-site2 alpha; and site1 beta-site2 beta. When different types were at different sites (site1 beta-site2 alpha and site1 alpha-site2 beta), both were used equally. In contrast, when the same type was present at both sites (site1 alpha-site2 alpha and site1 beta-site2 beta), only the upstream element was used. We suggest that the two TATA elements are recognized by different factors of the transcription apparatus.

Constitutive expression of the Saccharomyces cerevisiae CUP1 gene in Kluyveromyces lactis

Shuttle plasmids, pE1.CUP1B and pE1.CUP1E of 10.6 kb, have been constructed between the metallothionein-encoding CUP1 gene of Saccharomyces cerevisiae and a vector capable of replication in Kluyveromyces lactis. Introduction of these plasmids into K. lactis confers resistance to copper as well as to cadmium and silver. Resistance to these latter metal ions, in the absence of induction by copper, suggested that the CUP1 gene is constitutively expressed in the foreign background. Introduction of the lacZ reporter gene from Escherichia coli into a cloning site downstream from the CUP1 promoter showed that expression of this gene is constitutive in K. lactis but in S. cerevisiae induction by copper is necessary. Sequences upstream from the CUP1 promoter are involved in the constitutive expression since deletion of 91 nucleotides from this region abolishes metal resistance. It is suggested that a K. lactis protein, normally involved in activating transcription of the resident CUP1 gene in the presence of copper, can promote transcription in the absence of metal ion by binding to the upstream activation sequence of the introduced CUP1 gene.