Hip stress reduction after Chiari osteotomy

Empirical joint contact mechanics: A comprehensive review

Empirical joint contact mechanics measurement (EJCM; e.g. contact area or force, surface velocities) enables critical investigations of the relationship between changing joint mechanics and the impact on surface-to-surface interactions. In orthopedic biomechanics, understanding the changes to cartilage contact mechanics following joint pathology or aging is critical due to its suggested role in the increased risk of osteoarthritis (OA), which might be due to changed kinematics and kinetics that alter the contact patterns within a joint. This article reviews and discusses EJCM approaches that have been applied to articulating joints such that readers across different disciplines will be informed of the various measurement and analysis techniques used in this field. The approaches reviewed include classical measurement approaches (radiographic and sectioning, dye staining, casting, surface proximity, and pressure measurement), stereophotogrammetry/motion analysis, computed tomography (CT), magnetic resonance imaging (MRI), and high-speed videoradiography. Perspectives on approaches to advance this field of EJCM are provided, including the value of considering relative velocity in joints, tractional stress, quantification of joint contact area shape, consideration of normalization techniques, net response (superposition) of multiple input variables, and establishing linkages to regional cartilage health status. EJCM measures continue to provide insights to advance our understanding of cartilage health and degeneration and provide avenues to assess the efficacy and guide future directions of developing interventions (e.g. surgical, biological, rehabilitative) to optimize joint's health and function long term.

Assessment of cartilage contact pressure and loading in the hip joint during split posture

PURPOSE

Given the crucial role of the mechanical behavior in the degenerative process of the hip joint, analyzing the contact mechanics in the articular layers during physical activities could contribute to understanding the pathology. Indeed, the development process of hip osteoarthritis generally evolves over a long time period, and therefore analyzing the mechanical behavior of the hip joint during extreme repetitive movements will be helpful to analyze degeneration causes. The aim of the study was to investigate the link between the excessive movements and the development of hip osteoarthritis.

METHODS

To individualize the analysis, we used a subject-specific and noninvasive approach based on finite element analysis and magnetic resonance imaging (MRI) data. The contact pressure distribution and loading conditions on the acetabular cartilage were assessed on eleven professional dancer subjects performing a split movement. This movement is frequently practiced (repetitive) by dancers during their daily exercises. Moreover, split postures are mostly characterized by high anatomical angles with subluxation (excessive). To ensure the motion accuracy, MRI data of the subjects were acquired in neutral and split positions performed inside the MRI scanner. Based on the reconstructed bone models from the MRI data, a motion tracking approach was used to compute the transformation between the two poses. To evaluate the contact during the split movement and to quantify the role of the labrum in the hip joint mechanics, additional simulations of two daily activities (walking and stand-up) were performed. Finally, a clinical study based on morphological and radiological analysis of the subjects was performed and validated by orthopedic surgeons and radiological experts to evaluate the proposed approach.

RESULTS

The reconstructed split movement was characterized by high anatomical angles with a subluxation on the left hip. Consequently, strong deformations and pressures were observed during the simulation. The comparison of the simulation results of split posture and daily activities showed higher pressure and lower contact area during extreme movements. Moreover, the presence of labrum absorbed part of load and consequently decreased the predicted contact pressure and contact area on the acetabular cartilage.

CONCLUSION

The comparison of the simulation results of the split posture and daily activities, as well as the correlation between the results of the analysis on extreme movement results and the clinical analysis performed by medical experts, strongly suggests that repetitive extreme movement could lead to early hip osteoarthritis.

Rapid hip osteoarthritis development in a patient with anterior acetabular cyst with sagittal alignment change

Rapidly destructive coxarthrosis (RDC) is rare and develops unusual clinical course. Recent studies suggest multiple possible mechanisms of the development of RDC. However the exact mechanism of RDC is still not clear. The difficulty of the study on RDC is attributed to its rareness and the fact that the data before the onset of RDC is normally unavailable. In this report, we presented the patient having the radiographic data before the onset who had rapid osteoarthritis (OA) development after contralateral THA, which meets the current criteria of RDC. We thought that the increased posterior tilt of the pelvis after THA reinforced the stress concentration at pre-existed anterior acetabular cyst, thereby the destruction of the cyst was occurred. As a result the rapid OA was developed. We think that there is the case of rapid osteoarthritis developing due to alternating load concentration by posterior pelvic tilt on preexisting anterior acetabular cyst such as our patient among the cases diagnosed as RDC without any identifiable etiology. The recognition of sagittal alignment changes and anterior acetabular cyst may play important role in prediction and prevention of the rapid hip osteoarthritis development similar to RDC.

Unfavorable hip stress distribution after Legg-Calvé-Perthes syndrome: a 25-year follow-up of 135 hips

To study the effect of hip and pelvis geometry on development of the hip after Perthes disease, we determined the resultant hip force and contact hip stress distribution in a population of 135 adult hips of patients who had been treated for Perthes disease in childhood. Contra-lateral hips with no record of disease were taken as the control population. Biomechanical parameters were determined by mathematical models for resultant hip force in one-legged stance and for contact hip stress, which use as an input the geometrical parameters assessed from anteroposterior radiographs. The mathematical model for stress was upgraded to account for the deviation of the femoral head shape from spherical. No differences were found in resultant hip force and in peak contact hip stress between the hips that were in childhood subject to Perthes disease and the control population, but a considerable (148%) and significant (p < 0.001) difference was found in the contact hip stress gradient index, expressing an unfavorable, steep decrease of contact stress at the lateral acetabular rim. This finding indicates an increased risk of early coxarthritis in hips subject to Perthes disease.

Impact of triple pelvic osteotomy on contact stress pressure distribution in the hip joint

PURPOSE

We studied changes of contact stress distribution in the hip joint after Tonnis triple pelvic osteotomy applied in the treatment of dysplasia and hip joint incongruence in adolescents.

METHODS

In a group of 75 patients, 54 (72 %) female, who underwent surgery by triple pelvic osteotomy in adolescence for developmental disorder of the hip and avascular necrosis of the femoral head, a three-dimensional hip joint model was used based on the radiography of the pelvis with hips. The following biomechanical parameters were calculated: resultant hip force normalised to body weight (R/Wb), inclination of the resultant hip force (θ-R), the position of the stress pole (θ), peak contact hip stress (Pmax), and peak contact hip stress normalised to body weight (Pmax/Wb). Gait quality was also assessed.

RESULTS

After surgery the Wiberg CE angle was increased by 17.85° (114 %), resultant hip force normalised to body weight (R/Wb) was decreased by 0.107 (3.3 %), the position of the stress pole was shifted medially by 27.59° (63.5 %), and peak contact hip stress normalised to body weight (Pmax/Wb) was decreased by 2249.74 (55.9 %). Waddling gait was reduced from 17 (23.9 %) to four cases (5.6 %). All changes were statistically highly significant (p<0.01).

CONCLUSIONS

The effect of Tonnis triple pelvic osteotomy lies in the improvement of stress distribution across the acetabular cartilage of the hip joint, thus slowing down the degenerative damage of the hip joint.

Long-term experience with Chiari's osteotomy

Fifty-six years after the introduction of Chiari's pelvic osteotomy, we report the long-term function scores and radiographic grade of osteoarthritis in 66 patients with 80 pelvic osteotomies with a minimum followup time of 27 years (average, 32 years; range, 27-48 years). These 66 patients were those who could be contacted and who returned for a followup visit from among 450 patients operated between 1961 and 1981. Thirty-two hips (40%) in 28 patients had undergone a total joint arthroplasty after an average 26 years (range, 13-41 years). Forty-eight hips in 41 patients (60%) were not replaced, their Harris hip score being a median of 82 points (range, 37-100 points). For the 22 patients for whom we had complete radiographs the average preoperative CE angle was 11.6 degrees, 48.6 degrees (range, 31 degrees-82.8 degrees) immediately postoperatively, and 41.6 degrees (range, 13.7 degrees-90 degrees) at last followup . Despite a functional hip score in most patients retaining their native hip, the degree of osteoarthritis progressed at last followup. We observed a similar mean age at the time of osteotomy in patients converted to total hip arthroplasty and those retaining their native hip. Age at time of surgery was inversely correlated (r = -0.78) with the interval between the osteotomy and THA. In this select patient group we found good functional outcome in patients who underwent Chiari pelvic osteotomy, with a conversion rate of 40% to total hip arthroplasty a mean of 32 years after the procedure.

LEVEL OF EVIDENCE

Level IV, case series. See Guidelines for Authors for a complete description of levels of evidence.

Cumulative hip contact stress predicts osteoarthritis in DDH

Hip stresses are generally believed to influence whether a hip develops osteoarthritis (OA); similarly, various osteotomies have been proposed to reduce contact stresses and the risk of OA. We asked whether elevated hip contact stress predicted osteoarthritis in initially asymptomatic human hips. We identified 58 nonoperatively treated nonsubluxated hips with developmental dysplasia (DDH) without symptoms at skeletal maturity; the control group included 48 adult hips without hip disease. The minimum followup was 20 years (mean, 29 years; range, 20-41 years). Peak contact stress was computed with the HIPSTRESS method using anteroposterior pelvic radiographs at skeletal maturity. The cumulative contact stress was determined by multiplying the peak contact stress by age at followup. We compared WOMAC scores and radiographic indices of OA. Dysplastic hips had higher mean peak contact and higher mean cumulative contact stress than normal hips. Mean WOMAC scores and percentage of asymptomatic hips in the study group (mean age 51 years) were similar to those in the control group (mean age 68 years). After adjusting for gender and age, the cumulative contact stress, Wiberg center-edge angle, body mass index, but not the peak contact stress, independently predicted the final WOMAC score in dysplastic hips but not in normal hips. Cumulative contact stress predicted early hip OA better than the Wiberg center-edge angle.

LEVEL OF EVIDENCE

Level II, prognostic study. See the Guidelines for Authors for a complete description of levels of evidence.

Higher peak contact hip stress predetermines the side of hip involved in idiopathic osteoarthritis

BACKGROUND

Biomechanical parameters of the hip have been suggested to have an important influence on the development of osteoarthritis. We aimed to find out whether higher stress is generated in a hip that subsequently results in earlier hip arthroplasty compared to the contralateral hip in the same subject.

METHODS

Standard anterior-posterior pelvic radiographs with no or subtle radiological signs of hip osteoarthritis, of 59 female patients, who underwent hip arthroplasty for primary osteoarthritis years later, were selected from the archives. For each subject peak contact hip stress of the hip with earlier arthroplasty and of the contralateral hip (pair of hips), was calculated from the radiographically obtained geometrical parameters with the HIPSTRESS program, which is based on a three-dimensional biomechanical model of the resultant hip force in the one-legged stance and a three-dimensional mathematical model of the contact hip stress distribution. Differences in peak contact hip stress within pairs of hips were determined for subjects with unilateral (22 pairs of hips) and bilateral disease (37 pairs of hips) by using paired-samples T-test.

FINDINGS

In the population of subjects with unilateral osteoarthritis, average peak contact hip stress was significantly higher (P = 0.007) in hips with arthroplasty (2.44 kPa/N) than in contralateral hips (2.32 kPa/N). In the population of subjects with bilateral osteoarthritis, average peak contact hip stress was significantly higher (P<0.001) in hips with earlier arthroplasty (2.54 kPa/N) than in contralateral hips (2.35 kPa/N).

INTERPRETATION

Results are consistent with the hypothesis that higher peak contact hip stress results in earlier hip arthroplasty due to faster development of idiopathic osteoarthritis.

Association between contact hip stress and RSA-measured wear rates in total hip arthroplasties of 31 patients

BACKGROUND

The main concern in the long run of total hip replacements is aseptic loosening of the prosthesis. Optimization of the biomechanics of the hip joint is necessary for optimization of long-term success. A widely implementable tool to predict biomechanical consequences of preoperatively planned reconstructions still has to be developed. A potentially useful model to this purpose has been developed previously. The aim of this study is to quantify the association between the estimated hip joint contact force by this biomechanical model and RSA-measured wear rates in a clinical setting.

METHODS

Thirty-one patients with a total hip replacement were measured with RSA, the gold standard for clinical wear measurements. The reference examination was done within 1 week of the operation and the follow-up examinations were done at 1, 2 and 5 years. Conventional pelvic X-rays were taken on the same day. The contact stress distribution in the hip joint was determined by the computer program HIPSTRESS. The procedure for the determination of the hip joint contact stress distribution is based on the mathematical model of the resultant hip force in the one-legged stance and the mathematical model of the contact stress distribution. The model for the force requires as input data, several geometrical parameters of the hip and the body weight, while the model for stress requires as input data, the magnitude and direction of the resultant hip force. The stress distribution is presented by the peak stress-the maximal value of stress on the weight-bearing area (p(max)) and also by the peak stress calculated with respect to the body weight (p(max)/W(B)) which gives the effect of hip geometry. Visualization of the relations between predicted values by the model and the wear at different points in the follow-up was done using scatterplots. Correlations were expressed as Pearson r values.

RESULTS

The predicted p(max) and wear were clearly correlated in the first year post-operatively (r = 0.58, p = 0.002), while this correlation is weaker after 2 years (r = 0.19, p = 0.337) and 5 years (r = 0.24, p = 0.235). The wear values at 1, 2 and 5 years post-operatively correlate with each other in the way that is expected considering the wear velocity curve of the whole group. The correlation between the predicted p(max) values of two observers who were blinded for each other's results was very good (r = 0.93, p < 0.001).

CONCLUSION

We conclude that the biomechanical model used in this paper provides a scientific foundation for the development of a new way of constructing preoperative biomechanical plans for total hip replacements.

Contact stress in hips with osteonecrosis of the femoral head

Contact stress distribution in the articular surface of the hip is considered a factor in the development of osteoarthritis, a common complication in hips with aseptic necrosis of the femoral head. We present evidence supporting the hypothesis that osteoarthritis in hips with aseptic necrosis of the femoral head can be caused by elevated contact stress related to the reduced load-bearing ability of the necrotic bone. By using a previously validated mathematical model, we observed that hip contact stress may increase considerably if the load-bearing capacity of the necrotic lesion is decreased, if the size of the necrotic segment is increased, and if the necrotic segment is located more laterally. These effects are affected by the intrinsic shape of the hip. As the estimated values of stress in hips with osteonecrosis are in the range obtained by the same method in dysplastic hips, osteoarthritis in hips with osteonecrosis can be caused by elevated contact stress.