Anterior joint space narrowing in patients with temporomandibular disorder

Diagnostic significance and evaluation of alterations in the superior joint space for temporomandibular joint fracture detection

OBJECTIVE

To comprehensively assess the diagnostic significance of variations in the superior joint space (SJS) of the temporomandibular joint (TMJ) for the detection of TMJ fractures through spiral computed tomography (CT) scans.

METHODS

A retrospective analysis was conducted of CT scans of 32 patients with clinically confirmed TMJ fractures and 30 controls without fractures. The SJS was meticulously measured using the Kamelchuk method. Statistical analyses, including the Wilcoxon signed-rank test for paired comparisons, the Mann-Whitney U test for comparisons between groups, and ROC curve analysis for evaluating diagnostic performance, were performed to rigorously quantify the diagnostic importance of SJS changes. Binary logistic regression modeling was also applied to validate the accuracy of the assessment and determine the odds ratio (OR).

RESULTS

In the fracture group, statistically significant differences were observed in the SJS of bilateral TMJs (p < 0.05), whereas no significant difference was noted in the control group. The mean SJS on the fractured side was 3.75 mm, notably greater than the bilateral mean of 3.03 mm in the control group (p < 0.001). The discrepancy in SJS between sides in the fracture group (0.82 mm) significantly surpassed that of the control group (0.19 mm, p < 0.001). Utilizing an optimal threshold SJS difference of 0.62 mm, the diagnostic sensitivity was 63.30%, specificity was 86.70%, and accuracy was 76.70%, with an OR of 21.00 (95% CI: 4.198-105.038).

CONCLUSION

This study found that changes in the SJS caused by TMJ fractures have significant diagnostic value in fracture detection, serving as a reliable tool for early and accurate diagnosis. By utilizing early identification and diagnosis via spiral CT, the study evaluated the changes in the SJS induced by fractures, providing crucial diagnostic information for clinical practice. This discovery emphasizes the pivotal role of SJS changes in identifying TMJ fractures and offers new diagnostic methods and insights for clinical practice.

Changes of temporomandibular joint space volume during 1 year after transoral vertical ramus osteotomy in patients with mandibular asymmetry

This retrospective study aimed to evaluate the difference in the temporomandibular joint (TMJ) space volume between the deviated (Dev) and non-deviated (NDev) side following transoral vertical ramus osteotomy (TOVRO) in patients with mandibular prognathism combined with asymmetry using reconstructed 3-dimensional images. Sixty joints from 30 patients who underwent TOVRO between January 2018 and December 2021 were included. Computed tomography (CT) or cone-beam CT was performed before surgery (T0), and 6 (T1) and 12 months postoperatively (T2). The volume of the overall joint space (Vjs) and its compartments (i.e., the anterior, posterior, medial, and lateral joint spaces) were calculated at each time point. A linear mixed model and repeated-measures covariance pattern with unstructured covariance were used. Vjs increased at T1 compared to T0 and decreased at T2 compared to T1 (p < 0.0001). Furthermore, the volume changes over time were statistically significant in all compartments (p < 0.05); however, there was no significant difference in the Vjs and its compartments between the Dev and NDev side over time (p > 0.05). Adjustments for sex and mandibular movements did not affect the results. This study can provide the basis in TMJ spatial change and predicting the prognosis after TOVRO in facial asymmetry.

Correlations of temporomandibular joint morphology and position using cone-beam computed tomography and dynamic functional analysis in orthodontic patients: A cross-sectional study

Objective

To correlate temporomandibular joint (TMJ) morphology and position with cone-beam computed tomography (CBCT) images, Joint Vibration Analysis (JVA), and Jaw Tracker (JT) to develop a radiation-free, dynamic method for screening and monitoring the TMJ in orthodontic patients.

Methods

A total of 236 orthodontic patients without symptoms of TMJ disorders who had undergone CBCT were selected for the JVA and JT tests in this cross-sectional study. TMJ position and morphology were measured using a three-dimensional analysis software. JT measurements involved six opening-closing cycles, and JVA measurements were performed using a metronome to guide the mouth opening-closing movements of the patients. The correlations among the three measuring devices were evaluated.

Results

Abnormalities in condylar surface morphology affected the mandibular range of motion. The cut-off value results show that when various measurement groups are within a certain range, abnormalities may be observed in morphology (area under the curve, 0.81; P < 0.001). A 300/< 300 Hz ratio ≥ 0.09 suggested abnormal morphology (P < 0.05). Correlations were observed among the maximum opening velocity, maximum vertical opening position, and joint spaces in the JT measurements. Correlations were also observed between the > 300/< 300 Hz ratio, median frequency, total integral, integral < 300 Hz, and peak frequency with joint spaces in the JVA measurements.

Conclusions

JT and JVA may serve as rapid, non-invasive, and radiation-free dynamic diagnostic tools for monitoring and screening TMJ abnormalities before and during orthodontic treatment.

Evaluation of the effect of unilateral mastication on the morphology of temporomandibular joint from the perspective of dynamic joint space

BACKGROUND

Unbalanced alterations of temporomandibular joint morphology were associated with unilaterally masticatory habits.

OBJECTIVE

This study aimed to investigate the effect of unilateral mastication on the remodelling of the temporomandibular joint using dynamic joint space.

METHODS

Twelve volunteers with non-maxillofacial deformity and healthy temporomandibular joints were recruited. The 3D models of the mandible and the maxilla were reconstructed according to computed tomography. The subjects were asked to masticate French fries and peanuts unilaterally, which was recorded by a 3D motion capture system. The dynamic joint space during unilateral mastication was analysed.

RESULTS

During early closure, the joint space reduction on the non-masticatory side was significantly greater than on the masticatory side (p < .05). During later closure, the joint space reduction on the non-masticatory side was significantly lower than that on the masticatory side (p < .05). The difference in joint space reduction between both sides was greater than the French fries while masticating the peanuts.

CONCLUSIONS

Unilateral mastication resulted in a different major pressure area on the bilateral TMJs. Therefore, unilateral mastication might be an essential factor in the bilateral asymmetrical remodelling of the TMJ.

Recommendations for standard criteria for the positional and morphological evaluation of temporomandibular joint osseous structures using cone-beam CT: a systematic review

OBJECTIVE

This systematic review aimed to appraise the reliability and comprehensiveness of imaging methods in studies that used three-dimensional assessment of the temporomandibular joint (TMJ) in order to propose a standardized imaging method.

METHODS

Six databases/search engines were searched up until September 2022. The outcomes of interest included measurements of the mandibular condyle, glenoid fossa, joint spaces, or the entire TMJ. Two checklists were utilized: one to assess the risk of bias, with a maximum score of 37, and the other, a pre-designed checklist consisting of 22 items to evaluate the comprehensiveness of the methods used, with a maximum score of 33.

RESULTS

Out of the 2567 records retrieved, only 14 studies, which used cone bean computed tomography (CBCT), were deemed eligible and thus included in the qualitative analysis. Three studies were deemed of low risk of bias, while the remaining studies were rated as moderate to high risk of bias, primarily due to improper reporting of inter-observer agreement, varying reliability values, and a limited number of cases included in the reliability analysis. Regarding the comprehensiveness of the methods used, only four studies achieved relatively high scores. The deficiencies observed were related to the reporting of variables such as slice thickness and voxel size, absence of or improper reporting of intra- and inter-examiner reliability analyses, and failure to assess all osseous components of the TMJ.

CONCLUSION

CBCT-based methods used to assess the positions and morphology of TMJ bony structures appear to be imperfect and lacking in comprehensiveness. Hence, criteria for a standardized assessment method of these TMJ structures are proposed.

CLINICAL RELEVANCE STATEMENT

Accurately, comprehensively, and reliably assessing the osseous structures of the temporomandibular joint will provide valid and valuable diagnostic features of the normal temporomandibular joint, and help establish potential associations between these osseous features and temporomandibular disorders.

REGISTRATION

The protocol for this systematic review was registered at the International Prospective Register of Systematic Reviews (PROSPERO, No.: CRD42020199792).

KEY POINTS

•Although many methods have been introduced to assess the osseous structure of the temporomandibular joint, they yielded inconsistent findings. •None of the published studies comprehensively assessed the temporomandibular joint. •Recommendations for a comprehensive temporomandibular joint osseous assessment method were suggested for better validity and reliability of future research.

Relationships between functional temporomandibular joint space and disc morphology, position, and condylar osseous condition in patients with temporomandibular disorder

OBJECTIVE

To investigate the correlations between joint space and temporomandibular joint (TMJ) components and the compressive states of the disc and condyle subsequent to joint space changes.

MATERIALS AND METHODS

A total of 240 TMJs were categorized according to disc morphology, disc position, and condylar osseous condition. The two-dimensional (2D) and three-dimensional (3D) measurements were compared. The functional joint space (FJS) and disc areas on closed- and open-mouth images (DA-C and DA-O) were also calculated, and the joint space was measured in five directions. Different groups of TMJ components were compared. A spring model was used to simulate the effect of condylar displacement on the disc and condyle.

RESULTS

Disc morphology was strongly correlated with its position. The measurements were equivalent between 2D and 3D methods. DA-C and FJS differed significantly between groups. The DA-C to FJS ratio differed between the Class 2 and Class 3 groups and between disc displacement groups with and without reduction. Altered disc morphology and position were correlated with significant changes in joint space in the 60°, 90°, and 120° directions. Despite minor discrepancies among condylar osseous conditions, reduced joint space was correlated with bone destruction at the corresponding site. The spring model stimulation revealed that condylar displacement caused elevated stresses on the disc and condyle.

CONCLUSIONS

Condylar displacement causes joint space alterations while exerting compressive pressure on both the disc and condyle.

CLINICAL RELEVANCE

Proper condylar positioning within the fossa is recommended to ensure sufficient articular disc accommodation.

Correlation between TMJ Space Alteration and Disc Displacement: A Retrospective CBCT and MRI Study

This study aims to determine if a large anterior and reduced posterior/superior joint space is highly predictable for disc displacement. From patients with temporomandibular disorders symptoms, fifty-two experimental joints and fourteen control joints were included. The cone beam computed tomography (CBCT) images were used to calculate posterior-to-anterior (P-A) and superior-to-anterior (S-A) joint space ratios, while disc position was determined using magnetic resonance imaging (MRI). One-way analysis of covariance test and receiver operating characteristics analysis were carried out. The results showed that among the 52 experimental joints, 45 were diagnosed as disc displacement and 7 as normal disc positions (N). All 14 control joints showed normal disc positions. The P-A ratio was 1.46 ± 0.21, 0.99 ± 0.23, and 0.86 ± 0.30 in the control, N, and DD groups, respectively (p < 0.001). The S-A ratio was 1.80 ± 0.27, 1.44 ± 0.33, and 1.08 ± 0.35 in the control, N, and DD groups, respectively (p < 0.001). When an altered P-A ratio and/or S-A ratio are observed on the CBCT, the diagnosis of disc displacement is quite predictable with high sensitivity and specificity.

Assessment of condylar anatomy and degenerative changes in temporomandibular joint disorders - A scoping review

Temporomandibular disorders (TMDs) are a group of conditions that cause pain and dysfunction in the temporomandibular joint (TMJ) and muscles that control mandibular movement. In most cases, the etiology is unclear and is considered multifactorial. Recent research suggests that some forms of TMD could be associated with specific TMJ morphological characteristics. This study aims to provide a review of the reported anatomical and degenerative morphological condylar characteristics of subjects with a clinical diagnosis of TMD as described with the use of CBCT imaging, as well as the detection of potential predisposing anatomical factors. This review was developed and reported in accordance with the PRISMA-ScR Checklist. A comprehensive search was performed in five databases. Reports were screened by two independent reviewers based on preselected inclusion and exclusion criteria. 45 studies were included in this review. The most frequently reported degenerative changes associated with TMD were condylar surface erosion, flattening, osteophytes, and sclerosis. Anatomical characteristics included a small condylar size and a posterior position of the condylar head in the TMJ. The anterosuperior area of the condylar head appears to be the most frequently affected. More studies are required to determine potential specific predisposing anatomical characteristics.

Three dimensional evaluation of the skeletal and temporomandibular joint changes following stabilization splint therapy in patients with temporomandibular joint disorders and mandibular deviation: a retrospective study

BACKGROUND

Three-dimensional (3D) detailed evaluations of the mandibular mediolateral position, mandibular condylar position, and temporomandibular joint (TMJ) spaces following stabilization splints (SS) therapy in patients with temporomandibular joint disorders (TMD) and mandibular deviation (MD) have not been reported in the available literature. Accordingly, this study aimed to three-dimensionally analyze the skeletal and bony temporomandibular joint changes following stabilization splint therapy in adult patients with temporomandibular joint disorders and mandibular deviation.

METHODS

This study is a retrospective clinical study that enrolled 26 adult patients with TMD and MD with a mean age of 24.86 years. The Diagnostic Criteria for Temporomandibular Disorders (DC/TMD) was used to diagnose TMD. SS was adjusted weekly until occlusal contact stabilization occurred, and then adjusted monthly, patients were instructed to wear it at night for at least 10 h. The SS was removed after the elimination of TMD symptoms (TMJ/muscle pain on palpation, muscle spasm, and clicking) and having both condyles completely seated in a musculoskeletally stable position. Pre- and post-therapeutic Cone Beam Computed Tomography (CBCT) was analyzed. Mandibular mediolateral position, TMJ spaces, and mandibular condyle position were analyzed three-dimensionally using Mimics 21.0 software. Paired t-test or Wilcoxon rank-sum test was performed, and the significance level was considered at P < 0.05.

RESULTS

The treatment period with SS therapy was 10.07 ± 3.1 months. The deviated chin was improved in 69.23% of the sample; the range of improvement was > 0 mm ≤ 3.9 mm. The mandibular rotation was significantly decreased from 3.58 ± 2.02° to 3.17 ± 1.60. The deviated side's superior and posterior joint TMJ spaces were significantly increased from 2.49 ± 0.88 mm and 1.25 ± 0.79 mm to 2.98 ± 1.02 mm and 1.86 ± 0.72 mm, respectively. The value of the difference from the bilateral condyle head position to the X and Z axes significantly decreased from 2.50 ± 1.56 mm and 2.30 ± 1.57 mm to 1.64 ± 1.58 mm and 1.82 ± 1.11 mm, respectively.

CONCLUSION

The main positional effect of the stabilization splint treatment in TMD patients with MD includes considerable correction of mandibular deviation, improving facial asymmetry, and moving the condyle into a stable condylar position; these were done by promoting the mandible to rotate around the Z (roll) and Y (yaw) axes and by forward, downward, and outward condylar movement on the deviated side, respectively.

Descriptions of the dynamic joint space of the temporomandibular joint

BACKGROUND

Clinical diagnosis and treatment depended heavily on the motion analysis of the human joints. Although the dynamic joint space (DJS) of other organs was widely used in academic investigations, they were not universally used in the temporomandibular joint (TMJ) field, which was also important for the motion evaluation of the TMJ. The objectives of this study are to introduce the DJS of the TMJ and characterize the DJS regulars of mandibular movements.

METHODS

Ten asymptomatic subjects were selected to instruct this application. The mouth opening and closing, mandibular protrusion, and left and right protrusions, were tracked by the optical motion tracking system. According to trajectories of markers and reconstructed models from computed tomography, the motions of the mandibles could be obtained. The DJSes, which were described as the minimum Euclidian distances, were subsequently calculated based on the geometrical surfaces between the condyle and fossa during the motions. Then, the DJS map could be drawn based on the calculated values.

RESULTS

The DJS map manifested a decreasing trend when the condyle crossed the glenoid fossa, while it generally increased after the condyle crossed the fossa during the mouth opening. The results showed that the average maximum and minimum anterior joint spaces were 5.39 mm and 2.07 mm during mouth opening respectively with a great discrepancy existing among the subjects. The average maximum and minimum anterior joint spaces were 4.74 mm and 2.19 mm during mandibular protrusion. As for left and right protrusions, the DJS of the contralateral side was greater than that of the ipsilateral side.

CONCLUSION

In comparison to morphological analyses or only mandibular motions, the DJS provides more dynamic and interactive information about the TMJ. The research and methodology may help us comprehend TMJ motions and temporomandibular disorders.

Limited implication of initial bone scintigraphy on long-term condylar bone change in temporomandibular disorders-Comparison with cone beam computed tomography at 1 year

BACKGROUND

The current diagnostic criteria for temporomandibular disorders (TMD) do not require imaging for the diagnosis of degenerative joint disease (DJD) of the temporomandibular joint (TMJ) condyle, and there is a lack of data investigating the effectiveness of imaging modalities in predicting long-term TMJ DJD prognosis.

OBJECTIVES

To verify the association between initial bone scintigraphy results and long-term DJD bone changes occurring in the TMJ condyle on cone beam computed tomography (CBCT).

METHODS

Initial bone scintigraphy, panoramic radiography and CBCT results were analysed in relation to long-term (12 months) TMJ DJD bone change on CBCTs in 55 TMD patients (110 joints). Clinical and radiographic indices were statistically analysed among three groups (improved, no change, and worsened) based on long-term TMJ DJD prognosis calculated by destructive change index (DCI).

RESULTS

Neither the uptake ratio nor visual assessment results from initial bone scintigraphy showed a significant difference according to long-term condylar bone change groups. The cut-off value of bone scintigraphy uptake ratio was 2.53 for long-term worsening of TMJ DJD. Worsening of TMJ DJD was significantly associated with the diagnosis based on panoramic radiography (p = .011) and CBCT (p < .001). Initial DCI (β = -.291, p = .046) had a significant association with long-term worsening of TMJ DJD.

CONCLUSION

Initial bone scintigraphy results did not show sufficiently close associations with long-term TMJ DJD prognosis. This should be considered in the selection process of imaging modalities for TMJ DJD patients. Future studies are needed to develop prognostic indices that comprise both clinical and imaging contents for improved predictive ability.

Occurrence and severity of neck disability in individuals with different types of temporomandibular disorder

BACKGROUND

Healthcare professionals need to know the degree of disability and severity of their patients to determine actions and therapy needed to minimize potential harm, improve their patient condition, and maximize clinical outcomes.

OBJECTIVES

To evaluate the occurrence and severity of neck disability in individuals with muscular, joint, and mixed temporomandibular disorder (TMD).

MATERIALS AND METHODS

Cross-sectional study with individuals divided into four groups: muscular TMD (n=20), joint TMD (n=20), mixed TMD (n=20) and control (n=20). For diagnosis and classification of TMD, it was used the Research Diagnostic Criteria (RDC) and to assess the severity of neck dysfunction the Neck Disability Index (NDI).

RESULTS

Moderate neck disability was frequent in all individuals with TMD; high scores of neck disability index were evidenced in the mixed and joint TMD groups; there was a moderate positive correlation between the severity of neck disability and TMD severity (r=0.7; CI=0.32-0.78; p<0.03).

CONCLUSION

The gravity of neck disability and the severity of TMD are directly proportional in the group of individuals with mixed TMD.