Die Rekonstruktion von gro�en Rotatorenmanschettenrupturen

The effect of medial shift of supraspinatus tendon on the glenohumeral joint motion-a cadaveric study

PURPOSE

Full-thickness retracted massive supraspinatus tears are a challenge for arthroscopic surgeons where multiple options for treatment exist, but medializing the attachment is a relatively easy procedure for which a decision can be taken intraoperatively. We investigate the viability of MATERIAL AND METHODS: Ten freshly thawed cadavers were taken and dissected. The supraspinatus tendon was resected, and then its attachment was progressively medialized. The range of motion (abduction, internal and external rotation) was recorded and compared. As a result, we noted a statistically significant decrease in abduction, internal and external rotation with progressive medialization of the supraspinatus insertion.

CONCLUSION

Medialized repair of the supraspinatus can be performed only to an extent beyond which it compromises glenohumeral motion. We noted a statistically significant decrease in ROM with even a 3 mm medialization of the tendon, but the acceptable medialization has to be determined on a case-to-case basis.

An Arthroscopic Humeral Medializing Repair of the Supraspinatus

Posterosuperior repair of the rotator cuff is one of the most frequently performed surgical procedures in the shoulder. Its aim is to fix the tendon back to the bone to restore anatomy, improve shoulder function, and prevent progression of cuff tear arthropathy and attendant muscle degeneration. Despite technical advances in this procedure, in some cases, the tendon cannot be fixed back to the footprint without excessive tension on the repair. In young patients or in patients with low-grade muscle atrophy and fatty degeneration (Goutallier grade 1 or 2), it is mandatory to attempt fixation of the tendon to restore functional anatomy and prevent further muscle degeneration. In such cases, an arthroscopic medialized reinsertion of the supraspinatus may be considered. We describe an arthroscopic humeral medializing repair of the supraspinatus tendon that allows for a tension-free repair of the supraspinatus using common portals and instruments. The goal of this technique is to obtain tendon healing, restore functional anatomy, and prevent atrophy and fatty degeneration of the muscles of the rotator cuff.

Latissimus Dorsi Transfer in Posterior Irreparable Rotator Cuff Tears

BACKGROUND

Massive rotator cuff tears pose a difficult and complex challenge even for the experienced surgeon; inability to repair these tears by conventional means designates them as irreparable, while management becomes quite taxing. Several operative options have been suggested for the management of such lesions with varying degrees of success, while it is imperative to match patient demands and expectations to the predicted outcome.

METHODS

Research articles are examined and key concepts are discussed, in order to provide an evidence based review of the available literature. The anatomy and pathomechanics along with the indications, contraindications and surgical techniques are reported.

RESULTS

Transfer of the Latissimus dorsi has been used with success to restore shoulder function in deficits of the posterior rotator cuff. Although it can be used in a variety of settings, the ideal patient for a Latissimus dorsi tendon transfer is a young and active individual, with no glenohumeral osteoarthritis that has a severe disability and weakness related to an irreparable posterior cuff tear.

CONCLUSION

Tendon transfers have proved to be a successful treatment option in salvaging this difficult problem, providing pain relief and restoring shoulder function. Despite the excellent functional outcomes and pain suppression following operation, a variety of factors may affect the outcome; thus making indications and preoperative assessment a valuable component.

Initial load-to-failure and failure analysis in single- and double-row repair techniques for rotator cuff repair

AIM

This experimental study aimed to compare the load-to-failure rate and stiffness of single- versus double-row suture techniques for repairing rotator cuff lesions using two different suture materials. Additionally, the mode of failure of each repair was evaluated.

METHOD

In 32 sheep shoulders, a standardized tear of the infraspinatus tendon was created. Then, n = 8 specimen were randomized to four repair methods: (1) Double-row Anchor Ethibond coupled with polyester sutures, USP No. 2; (2) Double-Row Anchor HiFi with polyblend polyethylene sutures, USP No. 2; (3) Single-Row Anchor Ethibond coupled with braided polyester sutures, USP No. 2; and (4) Single-Row Anchor HiFi with braided polyblend polyethylene sutures, USP No. 2. Arthroscopic Mason-Allen stitches were placed (single-row) and combined with medial horizontal mattress stitches (double-row). All specimens were loaded to failure at a constant displacement rate on a material testing machine.

RESULTS

Group 4 showed lowest load-to-failure result with 155.7 +/- 31.1 N compared to group 1 (293.4 +/- 16.1 N) and group 2 (397.7 +/- 7.4 N) (P < 0.001). Stiffness was highest in group 2 (162 +/- 7.3 N/mm) and lowest in group 4 (84.4 +/- 19.9 mm) (P < 0.001). In group 4, the main cause of failure was due to the suture cutting through the tendon (n = 6), a failure case observed in only n = 1 specimen in group 2 (P < 0.001).

CONCLUSIONS

A double-row technique combined with arthroscopic Mason-Allen/horizontal mattress stitches provides high initial failure strength and may minimize the risk of the polyethylene sutures cutting through the tendon in rotator cuff repair when a single load force is used.

Large and massive tears of the rotator cuff

The aim of this study was to determine the functional outcome and rate of re-tears following mini-open repair of symptomatic large and massive tears of the rotator cuff using a two-row technique.

The 24 patients included in the study were assessed prospectively before and at a mean of 27 months (18 to 53) after surgery using the Constant and the Oxford Shoulder scores. Ultrasound examination was carried out at follow-up to determine the integrity of the repair. Patient satisfaction was assessed using a simple questionnaire.

The mean Constant score improved significantly from 36 before to 68 after operation (p < 0.0001) and the mean Oxford Shoulder score from 39 to 20 (p < 0.0001). Four of the 24 patients (17%) had a re-tear diagnosed by ultrasound. A total of 21 patients (87.5%) were satisfied with the outcome of their surgery. The repair remained intact in 20 patients (83%). However, the small number of re-tears (four patients) in the study did not allow sufficient analysis to show a difference in outcome in relation to the integrity of the repair.

Influence of tendon healing after arthroscopic rotator cuff repair on clinical outcome using single-row Mason-Allen suture technique: a prospective, MRI controlled study

The reported functional results of rotator cuff repair performed arthroscopically have been good. Only little is known about the cuff integrity after arthroscopic repair and how it influences the outcome. The aim of the study is to set a baseline of what rate of healing response respectively re-tears to expect and how cuff integrity alters the outcome. Fifty-three consecutive patients with an isolated supraspinatus tendon tear were arthroscopically operated and their tendons repaired. All pre- and postoperative data were prospectively collected. At a minimum follow-up after 24 months (average 26.4 months), the integrity of the cuff was evaluated by an open magnetic resonance imaging and the patients' function and satisfaction were documented and graded to the sex- and age-related Constant-score also using a dynamometer for strength testing. The re-tear rate was 24.5% with 13 non-healed tendons. The Constant-score of all patients improved significantly. The scores of the patients with a re-tear were significantly lower than those of the patient with an intact cuff. That was due to a less good performance in strength testing. The other categories of the Constant-score did not show any differences. The age of the patients with a re-tear was significantly higher. With the exception of age, we did not find any negative prognostic factor for a re-tear, and with the exception of re-tear no other factor influenced the Constant-score. Arthroscopic supraspinatus tendon repair yields a re-tear rate of 25% which is comparable with the results of open or mini/open repair. Cuff integrity influences postoperative strength and Constant-score. Patients older than 65 years show a higher re-tear rate. Therapeutic Level IV is the level of evidence.

Transfer of the tendon of latissimus dorsi for the treatment of massive tears of the rotator cuff: a new single-incision technique

We describe 14 patients who underwent transfer of latissimus dorsi using a new technique through a single-incision. Their mean age was 61 years (47 to 76) and the mean follow-up was 32 months (19 to 42). The mean Constant score improved from 46.5 to 74.6 points. The mean active flexion increased from 119 degrees to 170 degrees , mean abduction from 118 degrees to 169 degrees and mean external rotation from 19 degrees to 33 degrees . The Hornblower sign remained positive in three patients (23%) as did the external rotation lag sign also in three patients (23%). No patient had a positive drop-arm sign at follow-up. No significant difference was noted between the mean pre- and postoperative acromiohumeral distance as seen on radiographs. An increased grade of osteoarthritis was found in three patients (23%). Electromyographic analysis showed activity of the transferred muscle in all patients.

Étude par arthroscanner de la cicatrisation tendineuse après réparation arthroscopique de la coiffe des rotateurs

PURPOSE OF THE STUDY

Arthroscopic repair of rotator cuff tears is a well described technique with good clinical results. The purpose of this work was to use the arthro-CT-scan to evaluate tendon healing after arthroscopic repair and search for epidemiological, anatomic and technical factors predictive of tendon healing.

MATERIAL AND METHOD

This prospective consecutive series included 167 non-randomized shoulders. All patients underwent a preoperative assessment using the crude Constant score and a standard x-ray protocol to evaluate cuff status. Cuff repairs were all performed arthroscopically. The crude Constant score was used to follow patients. A control arthroscan was obtained in 148 patients.

RESULTS

Mean patient age was 59 years, 46% men and 77% dominant side. Mean duration of symptoms before repair was nine months. The tears resulted from trauma in 28%, including 9% occupational accidents. The preoperative mean crude Constant score was 52.4 (range 15-77). An isolated tear of the supraspinatus was observed in 68%. Frontal retraction of the supraspinatus was distal in 74%. In 29 cases, reduction was difficult. The quality of the tendon was considered normal in 56 cases and non-anatomic repair was necessary in six. At last follow-up (19 months on average) the mean crude Constant score was 80 (range 49-95). Arthro-CT-scan was performed to control healing in 148 patients and revealed anatomic healing in 69, defective healing in 27, and repeated tears in 52 shoulders. Factors predictive of healing were: tear less than six months old, sedentary occupational activity, non-dominant side, young patient, female gender, isolated small non-retracted tear of the supraspinatus, normal appearance of an easily reduced tendon, and good bone quality.

DISCUSSION

Time from tear to repair was long in this series. Tendon and muscle changes occurring after the injury could explain in part the healing failures.

CONCLUSION

But this study confirmed good functional and anatomic results given by arthroscopic repair of rotator cuff tears.