Determination of arsenic in environmental and biological samples using toluidine blue or safranine O by simple spectrophotometric method

Nanomaterial-based optical colorimetric sensors for rapid monitoring of inorganic arsenic species: a review

Health concerns about the toxicity of arsenic compounds have therefore encouraged the development of new analytical tools for quick monitoring of arsenic in real samples with improved sensitivity, selectivity, and reliability. An overview of advanced optical colorimetric sensor techniques for real-time monitoring of inorganic arsenic species in the environment is given in this review paper. Herein, several advanced optical colorimetric sensor techniques for arsenite (As+3) and arsenate (As+5) based on doping chromogenic dyes/reagents, biomolecule-modified nanomaterials, and arsenic-binding ligand tethered nanomaterials are introduced and discussed. This review also highlights the benefits and limitations of the colorimetric sensor for arsenic species. Finally, prospects and future developments of an optical colorimetric sensor for arsenic species are also proposed. For future study in this sector, particularly for field application, authors recommend this review paper will be helpful for readers to understand the design principles and their corresponding sensing mechanisms of various arsenic optical colorimetric sensors.

Photometric flow injection analysis of As(III) by using a homemade, LED-based flow-cell device and methyl orange reagent

Inorganic arsenic especially As(III) is considered a carcinogenic substance and its measurement is important in water samples. In this work, an inexpensive flow injection analysis system was designed for the photometric determination of As(III) at low concentrations. For this purpose, a light-emitting diode (LED) based photometer with a miniaturized detector, was fabricated and used as a determination apparatus and methyl orange was used as a detecting reagent. The fabricated photometer employed the LEDs, as a light source and the light detector. The λ_max of emission for emitter and detector LEDs were 525 and 625 nm, respectively. Determination of As (III) was based on its inhibition effect on the redox reaction between methyl orange and X₂ (Cl₂ or Br₂). The decolorization of the reaction products in the FIA system was monitored using the homemade flow cell detector. Analytical figures of merit including linear responses ranging from 0.03 to 3.0 mg/l of As(III) (r = 0.994), detection limits of 0.007 mg/l As(III), RSD% of 1.5% (n = 7), low reagent consumption per determination, and sampling throughput of 50 determinations per hour were achieved.

Morin-VitaminE-β-CyclodextrinInclusionComplexLoadedChitosanNanoparticles (M-Vit.E-CD-CSNPs) Ameliorate Arsenic-Induced Hepatotoxicityina Murine Model

The special features of cyclodextrins (CDs), hydrophilic outer surfaces and hydrophobic inner surfaces, allow for development of inclusion complexes. The two bioactive strong antioxidant hepatoprotective compounds, Morin and vitamin E, are water insoluble. The present study aimed to prepare Morin-vitamin E-β-cyclodextrin inclusion complex loaded chitosan nanoparticles (M-Vit.E-CD-CS NPs) and to examine their hepatoprotective efficacy against arsenic-induced toxicity in a murine model. The NPs were characterized by FTIR, DLS, NMR, DSC, XRD, AFM, and a TEM study. The NPs were spherical in shape, 178 ± 1.5 nm in size with a polydispersity index (PDI) value of 0.18 and a zeta potential value of −22.4 ± 0.31 mV, with >50% encapsulation and drug loading efficacy. Mice were exposed to arsenic via drinking water, followed by treatment without or with the NPs on every alternate day up to 30 days by oral gavaging. Administration of NPs inhibited the arsenic-induced elevation of liver function markers, inflammatory and proapoptotic factors, reactive oxygen species (ROS) production, alteration in the level of blood parameters and antioxidant factors, and liver damage, which was measured by different biochemical assays, ELISA, Western blot, and histological study. Organ distribution of nanoparticles was measured by HPLC. M-Vit.E-CD-CS NPs showing potent hepatoprotective activity may be therapeutically beneficial.

Morin encapsulated chitosan nanoparticles (MCNPs) ameliorate arsenic induced liver damage through improvement of the antioxidant system and prevention of apoptosis and inflammation in mice

Chronic exposure to arsenic over a period of time induces toxicity, primarily in the liver but gradually in all systems of the body. Morin hydrate (MH; 2',3,4',5,7-pentahydroxyflavone), a potent flavonoid abundantly present in plants of the Moraceae family, is thought to be a major bioactive compound that may be used to prevent a wide range of disease pathologies including hepatotoxicity. Therapeutic applications of morin (MOR) are however seriously constrained because of its insolubility, poor bioavailability, high metabolism and rapid elimination from the human body. Nanoformulation of MOR is a possible solution to these problems. In the present study we investigated the effectiveness of morin encapsulated chitosan nanoparticles (MCNPs) against arsenic induced liver damage in mice. MNCPs with an average diameter of 124.5 nm, a zeta potential of +16.2 mV and an encapsulation efficiency of 78% were prepared. Co-treatment of MOR and MCNPs by oral gavage on alternate days reduced the serum levels of AST, ALT, and ALP that were elevated in arsenic treated mice. The efficiency of MCNPs was found to be nearly 4 times higher than that of free MOR. Haematological and serum biochemical parameters including lipid profiles altered by arsenic were normalized following MCNP treatment. Arsenic deposition was lowered in the presence of MCNPs. Administration of MCNPs markedly inhibited ROS generation and elevated MDA levels in arsenic exposed mice. The level of hepatic antioxidant factors such as nuclear Nrf2 (Nrf2), superoxide dismutase (SOD), catalase (CAT), glutathione (GSH), GSH peroxidase (GPx), glutathione-S-transferase (GST), heme oxygenase-1 (HO-1), and NADPH quinone oxidoreductase 1(NQO1) were markedly enhanced in the arsenic + MCNP group. Treatment by MCNPs prevented the arsenic induced damage of tissue histology. Also, MCNPs suppressed the arsenic induced pro- and anti-apoptotic parameters and attenuated the level of inflammatory mediators. Our data suggest that MCNPs are good hepatoprotective agents compared to free morin against arsenic induced toxicity and the protective effect results from its strong antioxidant, antiapoptotic and anti-inflammatory properties.

Development of a microfluidic membraneless vaporization flow system for trace analysis of arsenic

A new design of a membraneless vaporization (MBL-VP) unit coupled with a specific flow system is presented for the determination of arsenic at trace levels using a hydride generation process. The MBL-VP unit contains two concentric conical reservoirs, with the outer cone selected as the donor reservoir. The volume of the outer donor reservoir is thereby greater than the acceptor volume, necessary for holding sufficient sample and reagents for the generation of arsine gas by reaction between As(iii) and sodium borohydride under acidic conditions. The arsine gas diffuses into the narrow headspace and is absorbed by an aliquot of 150 μL of mercuric chloride acceptor solution. The resulting reaction produces hydronium ions which is monitored by the absorbance change at 530 nm of the methyl orange indicator added in the acceptor solution. To decrease the detection limit, the aspiration and removal of the donor plug, comprising the sample, borohydride and acid, into and out of the donor cone are repeated several times, while the acceptor solution is kept unchanged. As a result, analysis of arsenic was achieved in the range of 10 to 100 μg L-1 with a detection limit of 8 μg L-1. Application to surface water was investigated. Percent recoveries of spiked surface water samples were in the range of 94-110%. For comparison of total arsenic (As(iii) and As(v)), the results obtained from the developed method are not statistically different from the ICP-OES method.

Nano-Enabled sensors for detection of arsenic in water

The elevated cases of arsenic contamination reported across the globe have made its early detection and remediation an active area of research. Although, the World Health Organisation has set the maximum provisional value for arsenic in drinking water at 10 parts per billion, yet concentrations as high as 5000 parts per billion are still reported. In human beings, chronic arsenic exposure can culminate into lethal diseases such as cancer. Thus, there is a need for urgent emergence of efficient and reliable detection system. This paper offers an overview of the state-of-art knowledge on current arsenic detection mechanisms. The central agenda of this paper is to develop an understanding into the nano-enabled methods for arsenic detection with an emphasis on strategic fabrication of nanostructures and the modulation of nanomaterial chemistry in order to strengthen the knowledge into novel nano-enabled solutions for arsenic contamination. Towards the end prospects for arsenic detection in water are also prompted.

A simple paper-based approach for arsenic determination in water using hydride generation coupled with mercaptosuccinic-acid capped CdTe quantum dots

This research aims to develop a simple paper-based device for arsenic detection in water samples where a hydride generation technique coupled with mercaptosuccinic acid-capped CdTe quantum dots (MSA-CdTe QDs) as a detection probe was applied to the detection system. MSA-CdTe QDs were coated on a paper strip, inserted into the cover cap of a reaction bottle, to react with the developed arsine gas. Fluorescent emission of the QDs was quenched upon the presence of arsenic in solutions, whereby only a small amount of the MSA-CdTe QDs was required. The excitation and emission wavelengths for fluorescent detection were 278.5 nm and 548.5 nm, respectively. The proposed system provided a limit of detection of 0.016 mg L-1 and a limit of quantitation of 0.053 mg L-1, and a detection range of 0.05-30.00 mg L-1. In addition, the tolerance level of the detection approach to interference by other vapor-generated species was successfully improved by placing another paper strip coated with a solution of saturated lead acetate in front of the detection paper strip. This developed approach offered a simple and fast, yet accurate and selective detection of arsenic contaminated in water samples. In addition, the mechanism of fluorescent quenching was also proposed.

Bio-accumulation of Arsenic (III) Using Nelumbo Nucifera Gaertn

BACKGROUND

High arsenic levels in potable water are a threat to public health in India. About 85% of the water in India's rural areas comes from groundwater and roughly 27 million people are at risk of arsenic (As) contamination.

OBJECTIVES

The present study was performed to examine the feasibility of providing an effective and affordable means for arsenic abatement in socio-economically poor and rural areas in India. This is the first report on the effectiveness of powder Nelumbo nucifera Gaertn (lotus) root biomass for As (III) eradication from aqueous solution.

METHODS

Batch experiments were conducted to determine the effects of various operating parameters, including pH, initial As (III) ion concentration, adsorbent dosages, and contact time for As (III) sorption onto lotus root.

DISCUSSION

The sorption efficiency of lotus root biomass for As (III) at pH 7 was found to be quantitative (96%) from 50 mg/L aqueous solution at a dose of 5gL-1. Capacity of the biosorbent for As (III) ion adsorption and the interaction between adsorbate with biosorbents were studied using Langmuir and Freundlich isotherm models. In the present study, the equilibrium parameter values ranged between 0 and 1, indicating that the adsorption of the As (III) ion onto lotus root biomass was favorable.

CONCLUSIONS

Lotus root powder biomass was found to be an effective adsorbent for As (III) and could be used as an efficient, cost-effective and environmentally safe biosorbent for the sorption of arsenic from aqueous solutions.

COMPETING INTERESTS

The authors declare no competing financial interests.

Use of heavy metals resistant bacteria-a strategy for arsenic bioremediation

A large number of industries release their untreated wastes in the environment causing an increase in the concentration of toxic pollutants including heavy metal ions in ground and drinking water which is above the WHO limit. The presence of toxic pollutants in the industrial wastes pollutes our environment. Arsenic (As) is a ubiquitous toxic metalloid. Its amount varies in different parts on the earth, and its concentration is increasing in our environment day by day both by natural and anthropogenic activities. It is found in two forms; one is arsenate (As⁵⁺) and other is arsenite (As³⁺) and the latter is more toxic due to high mobility across the cell membrane. The long-term use of arsenic-containing water causes arsenicosis. High arsenic consumption, revealed by skin harms, color change, and spots on hands and feet, may cause skin cancer and affect lungs and kidneys. Hypertension, a state of high blood pressure, and lack of insulin which causes diabetes and many other disorders which relate to reproduction are the consequences of arsenic contamination. Several methods have been employed to decontaminate arsenic pollution, but the bioremediation by using biomass of bacteria, algae, fungi, and yeasts is the most compromising approach and has gained much attention from researchers in the last few decades. The microbial detoxification of arsenic can be achieved by reduction, oxidation, and methylation. High bioremediation potential and feasibility of the process make bacteria an impending foundation for green chemistry to exterminate arsenic in the environment.

In situ solvent formation microextraction in the presence of ionic liquid for preconcentration and speciation of arsenic in saline samples and total arsenic in biological samples by electrothermal atomic absorption spectrometry

In this modality, the extraction phase is formed in situ while simultaneously extracting analytes. First, a water-miscible ionic liquid (IL) ([Hmim][BF(4)]), capable of complete dissolving in the aqueous solution, was added to the sample. Then, an ion-exchange reagent (NaPF(6)) was added to obtain the hydrophobic IL ([Hmim][PF(6)]) that acted as the analyte extractant to form the cloudy homogeneous solution for the preconcentration and speciation of trace amounts of As (III) and As (V) with electrothermal atomic absorption spectrometry (ETAAS) detection. In situ solvent formation microextraction is a simple and rapid method for extraction and preconcentration of metal ions from sample solutions containing high concentration of salt. Some effective factors that influence the microextraction efficiency were investigated and optimized. Under the optimum experimental conditions, the limit of detection (3 σ) and the enrichment factor were 6 ng L(-1) and 198, respectively. The obtained relative standard deviation was 4.78%. The proposed method was successfully applied for the determination of As (III) and As (V) in water samples, food salts, and total As in biological samples.

assisted disposable sensors for quantitative determination of

A method for determination of arsenic is described. The sensor was constructed by immobilizing reagents on TLC (thin layer chromatography) paper. The reaction is based on chromogenic reaction of arsenic with a coupling complex of sulfanilic acid and N-(1-naphthyl) ethylene diamine dihydrochloride (NEDA) and formation of purple to magenta spots followed by scanner based detection. Changes in RGB values of color spots on TLC strips create a pattern. The obtained pattern was analyzed using MATLAB software. The proposed sensor is linear in the range 1-10 and 25-100 μg mL -1. The minimum detection limit found was 0.018 μg mL-1of arsenic.

Adsorption of As(III) on chitosan-Fe-crosslinked complex (Ch-Fe)

It was reported the adsorption of As(III) on the surface of the chitosan-Fe-crosslinked complex. Theoretical correlation of the experimental equilibrium adsorption data for As(III)/Ch-Fe system is best explained by the non-linearized form Langmuir-Freundlich isotherm model. At optimum conditions, pH 9.0, the maximum adsorption capacity, calculated using the Langmuir-Freundlich isotherm model was 13.4 mg g⁻¹. The adsorption kinetics of As(III) onto Ch-Fe are described by the pseudo-first-order kinetic equation. The results of the Mössbauer spectroscopy showed that there is no redox process on the surface of the adsorbent.