Arthroskopische Pfannenrandrekonstruktion mit autologer Spanplastik

[Custom-made glenoid component via 3D print : A rescue prosthetic option for patients with massive glenoid destruction and simultaneous cuff-arthropathy]

The combination of glenoid destruction with cuff arthropathy remains a challenge. A 75-year old woman presented with a post-traumatic loss of the glenoid and concomitant cuff arthropathy. Using CT-data a custom-made glenoid component was created by 3D printing. 6 months after reverse shoulder arthroplasty, the patient was free of pain with acceptable ROM. An individual glenoid component created by 3D printing is a feasible therapeutic option in patients with loss of the glenoid and concomitant cuff arthropathy.

Analysis of complication after open coracoid transfer as a revision surgery for failed soft tissue stabilization in recurrent anterior shoulder instability

BACKGROUND

The coracoid transfer represents a treatment option for patients with recurrent shoulder instability. Only a few studies exist about the complication rate of the coracoid transfer as a revision surgery following failed soft tissue stabilization. The purpose of this study was to analyze the results and complication rate after coracoid transfer as a revision surgery.

METHODS

In this study 38 patients (4 females, 34 males, mean age 27 years) were included of whom 29 patients were available for follow-up after a mean of 27 months. Previous shoulder stabilization procedures were predominantly arthroscopic (n = 25). Complications were divided according to their timely appearance into early (< 3 months) and late (> 3 months) postoperatively as well as need for revision. Clinical scores [Constant Score (CS), Rowe Score (RS), Walch-Duplay-Score (WDS), WOSI and Subjective-Shoulder-Value (SSV)] were evaluated preoperatively and at final follow-up.

RESULTS

In this patient cohort, the overall complication rate was 27.6%, all of them occurred > 3 months postoperatively. In seven of eight cases (24.1%) a repeat surgical procedure was conducted. Recurrent instability occurred in three patients (10.3%) of which two received a revision surgery (n = 1 iliac-crest bone graft, n = 1 labral repair). Due to persistent pain five patients underwent an arthroscopic implant removal. The complication rate was with 40% higher in patients with two or more previous surgeries (n = 4 out of 10 patients) compared to patients with one previous surgery (21%, n = 4 out of 19 patients). The scores increased significantly comparing pre- to postoperative [CS 74-90 points, RS 27-91 points, WDS 16-89 points, WOSI 40-76% and SSV 41-82% (p < 0.05)].

CONCLUSION

The open coracoid transfer as a revision surgery after failed soft tissue stabilization leads to satisfying clinical results. However, the complication rate is high though comparable to data in the literature when used as a primary surgery. The indication for a coracoid transfer should be judged carefully and possible alternatives should be considered.

Restoration of Articular Geometry Using Current Graft Options for Large Glenoid Bone Defects in Anterior Shoulder Instability

PURPOSE

The purpose of this cadaveric study was to compare standard and modified coracoid transfer procedures, bicortical and tricortical iliac crest autografts, and tibial plafond and glenoid allografts with respect to glenoid surface curvature restoration.

METHODS

Computed tomography scans of 8 cadaveric shoulders were acquired in 9 conditions: (1) intact, (2) 25% width defect, (3) classic Latarjet, (4) modified congruent-arc Latarjet, (5) tricortical iliac crest inner table, (6) outer table, (7) bicortical iliac crest, (8) distal tibia, and (9) glenoid allograft. Outcome measures included articular surface area, width, depth, axial and coronal radius of curvature, and subchondral articular step-off, analyzed in bone and soft-tissue window.

RESULTS

Reconstruction of the articular surface area was optimal with the glenoid allograft (99.4%), classic Latarjet (97.4%), and iliac crest bicortical graft (93.2%). Depth was best restored by the congruent-arc Latarjet (101.0%), tibial (98.9%), and glenoid (95.3%) allografts. Axial curvature was closely matched by the glenoid allograft (97.5%), classic Latarjet (108.7%), and iliac bicortical graft (91.2%). Coronal curvature was most accurately restored by the glenoid allograft (102.6%), the tibial allograft (115.0%), and the classic Latarjet (55.9%). The articular step-off was smallest using the glenoid allograft.

CONCLUSIONS

Overall, glenoid allografts most accurately restored articular geometry. Alternative grafts provided restoration of some parameters but not others. Classic Latarjet performed well in axial and coronal curvature on average but exhibited large variability. Tibial allograft produced the poorest results in axial curvature, despite excellent coronal curvature reconstruction. The congruent-arc Latarjet did not restore the axial curvature accurately and overcorrected coronal curvature. Graft geometry must be weighed against availability, morbidity, and the role of additional stabilizers.

CLINICAL RELEVANCE

Accurate graft morphology may help prevent postoperative osteoarthritis. Grafts differ significantly regarding geometric parameters. The findings of this study will help surgeons select the most appropriate graft for glenoid reconstruction.

[Diagnostics and treatment concepts for anteroinferior shoulder instability : Current trends]

Shoulder instability arises when static or dynamic stabilizers deviate from the natural equilibrium. The most common form of shoulder instability is in an anteroinferior direction, affects young athletes in contact sports and can lead to permanent impairment of shoulder function and early degeneration of the joint. Conservative as well as operative therapy options have been controversially discussed for years. This article describes the current state of diagnostics, current trends in therapy decisions and relevant therapy options for anterior shoulder instability.

All-Arthroscopic Revision Eden-Hybinette Procedure for Failed Instability Surgery: Technique and Preliminary Results

PURPOSE

To describe the technique of an all-arthroscopic Eden-Hybinette procedure in the revision setting for treatment of a failed instability procedure, particularly after failed Latarjet, as well as to present preliminary results of this technique.

METHODS

Between 2007 and 2011, 18 shoulders with persistent instability after failed instability surgery were treated with an arthroscopic Eden-Hybinette technique using an autologous bicortical iliac crest bone graft. Of 18 patients, 12 (9 men, 3 women) were available for follow-up. The average follow-up was 28.8 months (range, 15 to 60 months). A Latarjet procedure was performed as an index surgery in 10 patients (83%). Two patients (17%) had a prior arthroscopic Bankart repair.

RESULTS

Eight patients (67%) obtained a good or excellent result, whereas 4 patients (33%) reported a fair or poor result. Seven patients (58%) returned to sport activities. A positive apprehension test persisted in 5 patients (42%), including 2 patients (17%) with recurrent subluxations. The Rowe score increased from 30.00 to 78.33 points (P < .0001). The Walch-Duplay score increased from 11.67 to 76.67 points (P < .0001). The Western Ontario Shoulder Instability Index score showed a good result of 28.71% (603 points). The average anterior flexion was 176° (range, 150° to 180°), and the average external rotation was 66° (range, 0° to 90°). Two patients (16.67%) showed a progression of glenohumeral osteoarthritic changes, with each patient increasing by one stage in the Samilson-Prieto classification. All 4 patients (33%) with a fair or poor result had a nonunion identified on postoperative computed tomography scan.

CONCLUSIONS

An all-arthroscopic Eden-Hybinette procedure in the revision setting for failed instability surgery, although technically demanding, is a safe, effective, and reproducible technique. Although the learning curve is considerable, this procedure offers all the advantages of arthroscopic surgery and allows reconstruction of glenoid defects and restoration of shoulder stability in this challenging patient population. In our hands, this procedure yields good or excellent results in 67% of patients. Successful outcome is correlated with bony healing of the iliac crest graft to the glenoid.

LEVEL OF EVIDENCE

Level IV, therapeutic case series.

Arthroscopic Glenoid Reconstruction for Chronic Anteroinferior Shoulder Instability Using a Tricortical Iliac Crest Bone Graft

Introduction

Arthroscopic glenoid reconstruction using a tricortical iliac crest bone graft is performed to anatomically reconstruct the glenoid and reestablish glenohumeral stability in patients with chronic anteroinferior shoulder instability and substantial osseous defects^1-3.

Indications & Contraindications

Step 1 Patient Positioning

Place the patient in the lateral decubitus position and prepare the arm and ipsilateral iliac crest.

Step 2 Diagnostic Arthroscopy and Portal Placement

Perform a diagnostic arthroscopy via the posterior portal and establish an anteroinferior, an anterosuperior, and a deep anteroinferior portal.

Step 3 Capsulolabral Complex Release and Scapular Neck Preparation

Depending on the pathology and morphology of the defect, release the capsulolabral complex from the scapular neck and prepare the glenoid rim and scapular neck with a motorized burr to ensure adequate osseous healing.

Step 4 Harvesting and Preparation of the Iliac Crest Bone Block

Harvest an autologous tricortical iliac crest bone block from the ipsilateral side and contour it appropriately for an anatomic reconstruction of the glenoid.

Step 5 Graft Insertion and Positioning

Enlarge the passage for the graft through the rotator interval, insert the bone block, and position it anatomically at the scapular neck.

Step 6 Graft Fixation

With the aid of a drill sleeve, temporarily stabilize the graft using Kirschner wires and then definitively attach it to the scapular neck using 2 Bio-Compression screws.

Step 7 Capsulolabral Repair

Reattach the capsulolabral complex to the original glenoid, inferior and superior to the bone block, using 2 knotless suture anchors to complete the anatomic reconstruction of the glenoid.

Step 8 Rehabilitation and Postoperative Treatment

Immobilize the arm for 6 weeks postoperatively and limit flexion and external rotation during this time period.

Results

Fifteen patients with a mean age of 31.4 years (range, 17 to 49 years) with anteroinferior glenohumeral instability and substantial glenoid defects underwent arthroscopic iliac crest bone-grafting and were prospectively evaluated for an average period of 20.6 months (range, 12 to 65 months)¹².

Pitfalls & Challenges

Balloon humeroplasty reconstruction for acute Hill-Sachs injury: A technical note

Posterior Hill-Sachs humeral defects are present in 80% to 100% of cases of anterior shoulder dislocation and are a factor in recurrent instability. Several techniques have been described to fill the defect and avoid recurrence. We developed a percutaneous technique to fill the newly created defect in which a percutaneous balloon, analogous to the one used in vertebral kyphoplasty, is used to reduce the defect, which is then filled with calcium phosphate cement. One patient with an acute anterior dislocation of the shoulder with no previous history was treated using this method. Early imaging results showed adequate reduction of the defect and no cement resorption. The patient was followed for 12 months; he had normal function of the shoulder and no recurrent dislocation. Shoulder computed tomography (CT) arthrography with contrast after 3 months showed an intact capsule and no recurrence of the defect. While this technique is certainly in its infancy, we have demonstrated that emergency reduction of the defect in acute first occurrence anterior shoulder dislocation is feasible, helps to restore normal anatomy of the humeral head and leads to good clinical results. Whether it can improve clinical results and prevent recurrent shoulder dislocation remains to be evaluated.

Arthroscopic anatomic glenoid reconstruction using an autologous iliac crest bone grafting technique

BACKGROUND

Open bone block procedures for glenohumeral stabilization have been used for a long time. With the advancement of arthroscopic techniques and the development of sophisticated instruments and implants, the insertion of the bone block can be performed by an all-arthroscopic approach. The purpose of this study was to evaluate the clinical and radiologic results after an arthroscopic anatomic glenoid reconstruction using an all-arthroscopic, autologous tricortical iliac crest bone grafting technique.

MATERIALS AND METHODS

Fifteen patients (1 female and 14 male patients; mean age, 31.4 years [range, 17-49 years]) underwent reconstruction of significant glenoid defects in cases of recurrent shoulder instability by the aforementioned technique. The patients were followed up clinically (range of motion, Constant score, Rowe score, Subjective Shoulder Value, and Western Ontario Shoulder Instability Index) and radiographically (with true anteroposterior and axillary views, as well as 2-/3-dimensional computed tomography [glenoid configuration, signs of graft resorption, bone consolidation, and glenoid index]).

RESULTS

After a mean follow-up period of 20.6 months (range, 12-65 months), the Constant score averaged 85.0 points (range, 73-98 points; contralateral side, 89.6 points [range, 78-96 points]), the Rowe score averaged 88.0 points (range, 65-100 points), the Subjective Shoulder Value averaged 84.5% (range, 50%-100%), and the Western Ontario Shoulder Instability Index averaged 76.7% (range, 46%-93%). No recurrent subluxations or dislocations were observed. Radiographically, computed tomography imaging showed a consolidated autograft in all cases. The glenoid index increased from a mean of 0.77 preoperatively to 1.16 immediately postoperatively; at the time of last follow-up, the glenoid index decreased to 1.04.

CONCLUSION

The arthroscopic reconstruction of anteroinferior glenoid defects re-creates the pear-shaped anatomy of the anteroinferior glenoid and leads to good to excellent early clinical results.

Reconstruction of glenoid bone defects in shoulder instability with autologous bone

Bone defects, both at glenoid and at the humeral side are a frequent sequel of anterior shoulder instability. Although the transfer of the coracoid process (Latarjet, Bristow procedures) has gained popularity in treating the glenoid defect, equal results can be achieved with the use of a bone graft, for which mainly a graft of the iliac crest is used. Recently, arthroscopic procedures have been developed, leaving the subscapularis muscle largely intact.