[Anatomy and biomechanics of the patellofemoral joint: physiological conditions and changes after total knee arthroplasty]

Intraoperative analysis of patellofemoral joint morphology before and after total knee arthroplasty

Background

Patellofemoral problems after total knee arthroplast (TKA) are frequent and often associated with a change in the geometry of the trochlear groove.

Objective

The present study aimed to analyze the feasibility of intraoperative examination of the patellofemoral joint geometry before and after the implantation of bicondylar total knee replacements without exposing the patient to radiation.

Material and methods

The patellofemoral joint morphology geometries of 33 patients before and after implantation of a bicondylar total knee replacement was intraoperatively analyzed using a digital scanning method. Femoral surface geometries were extracted from intraoperatively recorded tactile scanning data using an in-house algorithm. The geometries were then characterized by sulcus height, medial femoral condyle height and lateral femoral condyle height.

Results

Our preliminary results show that these key geometric parameters are only partially restored after TKA leading to a distinctly different shaped profile of the anterior distal femur. Maximum and minimum mean differences in sulcus height, medial femoral condyle height, and lateral femoral condyle height before and after surgery were 2.00 mm/−3.06 mm, 2.51 mm/−6.25 mm and 2.74 mm/−3.58 mm, respectively.

Conclusion

A new method for intraoperative analysis of the patellofemoral joint morphology before and after TKA without radiation exposure was developed and utilized. Even with the use of modern total knee designs, the patellofemoral articulation is considerably changed postoperatively as quantified by the key parameters of sulcus height, medial femoral condyle height, and lateral femoral condyle height. This may result in altered knee biomechanics and might explain persistent patellofemoral disorders, which are often reported by patients after TKA.

[Total knee arthroplasty. Patient-specific instruments and implants]

This article describes the concept and surgical technique of patient-specific total knee arthroplasty. Patient-specific implants and instruments are designed and fabricated based on computed tomography (CT) data of the leg. The disposable patient-specific drill guides and cutting-jigs are manufactured taking into consideration the anatomical and biomechanical axes of the knee joint and mediating the efficient pre-navigation of the osseous saw-cuts, without the need for additional navigation or balancing aids. The surgical plan is made on the basis of the CT data. The implantation technique comprises the following steps: distal femoral resection, tibial resection, balancing and femur preparation, tibia preparation, optional patellar resurfacing, trialling of the test components, and implantation of the final components. By using this patient-specific implant system, which includes not only personalized, single-use instruments, but also individualized implants, the surgeon is able to provide endoprosthetic treatment that broadly restores the patient's own knee anatomy and knee kinematics. Preliminary studies have proven the concept and data on this technology are promising so far; however, like a new implant, they are usually limited. In particular, comparative long-term clinical data are still to come.

[Patella navigation in computer-assisted TKA : Intraoperative measurement of patellar kinematics. Video article]

INTRODUCTION

Patellofemoral maltracking is a relevant problem after total knee arthroplasty (TKA). Patella navigation is a tool that allows real time monitoring of patella tracking.

MATERIAL

This video contribution demonstrates the technique of patellofemoral navigation and a possible consequence of intraoperative monitoring. A higher postoperative lateral tilt is addressed with a widening of the lateral retinaculum in a particular manner.

CONCLUSION

In selected cases of patellofemoral problems, patella navigation is a helpful tool to evaluate patellofemoral tracking intraoperatively. Modifications of implant position and soft tissue measurements can then prevent postoperative patellofemoral maltracking.

[Individualized total knee arthroplasty]

This article describes the rationale and the surgical technique of patient-specific uni-, bi-, or three-compartmental knee arthroplasty using the second generation (G2) of ConforMIS™ technology. The patient-individual implants and instruments are designed and fabricated based on data from a preoperative computed tomography of the lower limb. The disposable patient-specific drill guides and cutting-jigs are manufactured under consideration of the anatomical and biomechanical axes of the knee joint and mediate efficient pre-navigation of the saw-cuts on the femoral and tibial bone without the need for an additional navigation or balancing device. The surgical technique for all types of knee resurfacement comprises the steps of cartilage removal, knee balancing in extension and flexion, sparing bony cuts, final preparation of femur and tibia, trialling, cementing of components and final choice of tibial insert. The use of individualized three-dimensional image-derived resurfacing implants, as well as personalized single-use instrumentation, facilitates the surgeon to perform an almost anatomical knee resurfacement that has the potential to restore almost normal knee kinematics. The limited data on this novel technology is promising, however long-term clinical data is needed for final evaluation of this technology.

Influence of knee flexion angle and weight bearing on the Tibial Tuberosity-Trochlear Groove (TTTG) distance for evaluation of patellofemoral alignment

PURPOSE

The aim of the present study was to investigate the influence of knee flexion and weight bearing on the Tibial Tuberosity-Trochlear Groove (TTTG) distance.

MATERIALS AND METHODS

Magnetic resonance imaging of the knee was carried out in 8 healthy volunteers. An open 0.25 T scanner equipped with a C-shaped permanent tilting magnet allowing examinations in weight-bearing conditions was used for the present investigation. A 3D gradient-echo sequence with axial slice orientation was obtained in a lying and an upright position with the knee straight and at 30° of knee flexion. The medial, central and lateral trochlear heights as well as the TTTG were determined.

RESULTS

The mean medial trochlear height was 76.2 ± 4%, the central trochlear height was 72.2 ± 3%, and lateral trochlear height was 82.9 ± 3 %. The mean TTTG distance was 11.6 ± 4.4 mm in lying position at 0° knee flexion and 7.3 ± 2.9 mm (n.s.) at 30° knee flexion. Under weight bearing, the mean TTTG was significantly smaller at both 0° knee flexion 6.3 ± 3.2 mm (p = 0.040) and 30° knee flexion 4.9 ± 3.9 mm (p = 0.006) compared to the lying position with 0° knee flexion.

CONCLUSION

Tibial Tuberosity-Trochlear Groove distance depends on both knee flexion angle and weight bearing. The latter only seems to be of relevance in full extension.

[Musculoskeletal modeling of the patellofemoral joint. Dynamic analysis of patellar tracking]

Numerical simulations contribute to the understanding of patellofemoral diseases. Whereas cadaveric studies are limited with respect to reproducibility of results, the impact of different operative approaches can be systematically evaluated based on mathematical models. The objective of this study was to introduce a musculoskeletal model which is capable of describing the dynamic interactions within the patellofemoral joint. It contains major bony and soft tissue structures of the right leg including the medial patellofemoral ligament (MPFL). Two operative approaches were considered based on the model to illustrate the effect on patellofemoral biomechanics during active knee flexion: On the one hand the effect of femoral insertion during MPFL reconstruction on medial soft tissue tension, and on the other hand the difference in patella kinematics before and after total knee arthroplasty. Finally, the potential of musculoskeletal models is discussed.