Negligible effect of surgeon experience on the accuracy and time to perform unrestricted caliper verified kinematically aligned TKA with manual instruments

Femoral resection accuracy and precision in manual caliper-verified kinematic alignment total knee arthroplasty

Introduction

The accuracy and precision of bone resections in total knee arthroplasty (TKA) are essential to avoid poor implant positioning, which can lead to component wear, pain, and instability, reducing patient satisfaction and implant survivorship. Technology-assisted TKA techniques aim to improve accuracy but come with added costs, increased operative time, and varying success in clinical outcomes. Caliper-verified kinematic alignment (KA) attempts to restore the joint line by precisely measuring resections to equal implant thickness. We evaluated the accuracy and precision of caliper-verified KA-TKA performed with manual instruments. We hypothesised that this technique would achieve high accuracy and precision, with an average absolute difference between actual and target distal and posterior femoral resection measurements of ≤ 0.5 mm.

Methods

385 consecutive patients underwent primary unrestricted caliper-verified KA-TKA with manual instrumentation. The thickness of the distal medial (DM), distal lateral (DL), posterior medial (PM) and posterior lateral (PL) femoral condyle resections were measured with a caliper and compared to a target determined by the degree of cartilage loss, saw blade kerf, and femoral component thickness.

Results

The mean differences between the resected and target thicknesses for DM, DL, PM and PL femoral resections were 0.1 ± 0.2 mm, 0.1 ± 0.3 mm, 0.3 ± 0.5 mm and 0.2 ± 0.4 mm, respectively (mean ± std. dev.). Most femoral resections were within 0.5 mm of the target-97.7%, 94.5%, 85.7% and 89.4% of DM, DL, PM and PL resections, respectively.

Conclusion

Manual caliper-verified KA-TKA achieved highly accurate and precise femoral resections with absolute differences from target that averaged 0.175 mm. This simple, logical, efficient, and reproducible surgical technique may be an option for surgeons contemplating the use of technology-assisted options, such as patient-specific instrumentation or robotic arm-assisted TKA, and surgeons without access to such technologies.

Level of Evidence

Level II.

Does the posterior tibial slope in caliper-verified unrestricted kinematically aligned TKA using manual instruments match the slope in the contralateral healthy knee and improve function?

PURPOSE

Unrestricted kinematically aligned total knee arthroplasty (unKA TKA) strives to restore the pre-arthritic posterior tibial slope (PTS), however consistency of achieving this alignment target is unknown. The present study determined the proportion of subjects with differences in PTS less than 2° from the target and the improvement in patient-reported function after unKA TKA.

METHODS

A review of 562 postoperative scanograms identified 99 patients (51 female) with a unKA TKA in one limb, a contralateral healthy limb, and a postoperative axial CT scan. All patients were treated with a primary unKA TKA performed with mechanical instruments where the alignment target was setting the PTS to match that of the medial compartment of the contralateral healthy knee. The PTS of the TKA and the healthy medial tibial plateau were measured and the difference determined. The patient-reported Oxford Knee Score (OKS) measured pre- and post-operative function.

RESULTS

The proportion of subjects within a tolerance interval of ±2° of the contralateral healthy knee at 95% confidence was 85%. The median OKS improved from 20 points preoperatively to 47 points (range 18-48) at 15 months postoperatively. Greater differences of the PTS from healthy were unrelated to poorer Oxford Knee Scores.

CONCLUSION

Unrestricted KA TKA using manual instruments with caliper verification of resection thickness restored a high percentage of patients within a clinically acceptable tolerance of the posterior tibial slope of the contralateral healthy knee. The median postoperative OKS indicated clinically important improvement in patient-reported function.

Caliper verification and gap measurements of kinematic alignment total knee arthroplasty utilizing an imageless, accelerometer-based navigation system

PURPOSE

Kinematic alignment (KA) in total knee arthroplasty (TKA) aims to restore the patient's knee to the prearthritic state. The purpose of this study was to investigate the accuracy of using an implant-agnostic, imageless, accelerometer-based navigation system to perform KA TKA on the basis of caliper verification and quantification of the flexion and extension gaps.

MATERIALS AND METHODS

Seven cadaveric lower extremities underwent primary TKA utilizing a kinematic alignment workflow with the imageless navigation system. Accuracy of the technique was confirmed through caliper verification of bone cuts.

RESULTS

All cuts were within 1 mm of anticipated measurements, except for the lateral tibial fragment, which averaged 1 mm (standard deviation [SD] 0.9 mm) thicker than anticipated. In extension, medial and lateral gaps were symmetric and averaged within 0.6 mm of expectation. In flexion, the medial gap averaged within 0.5 mm of expectation, while the lateral gap averaged 2.6 mm larger than the symmetric expectation, consistently producing a trapezoidal space.

CONCLUSIONS

The implementation of an accelerometer-based navigation system in KA TKA allows for highly accurate results, which was confirmed with caliper verification. This workflow produced a symmetric extension gap and a trapezoidal flexion gap with an average increased lateral flexion gap of 2.6 mm compared with the medial side.

A new tibial insert design with ball-in-socket medial conformity and posterior cruciate ligament retention has low tibial baseplate migration after unrestricted kinematically aligned total knee arthroplasty: a cohort study using radiostereometric analysis

BACKGROUND AND PURPOSE

 In total knee arthroplasty (TKA), an insert with ball-in-socket (BS) medial conformity (MC) and posterior cruciate ligament (PCL) retention restores kinematics closer to native than an insert with intermediate (I) MC. However, high medial conformity might compromise baseplate stability as indicated by maximum total point motion (MTPM). Using the BS MC insert with PCL retention, we aimed to determine whether (i) the baseplate is stable as indicated by mean MTPM < 0.5 mm, (ii) baseplate stability is not strongly correlated to varus baseplate alignment, and (iii) baseplate stability, clinical outcome scores, and flexion are comparable with that of an I MC insert cohort which has demonstrated high stability, clinical outcome scores, and flexion.

METHODS

 Unrestricted kinematic alignment (unKA) TKA was performed on a cohort of 35 patients using a cemented baseplate. Biplanar radiographs acquired at timepoints up to 12 months were processed with model-based radiostereometric analysis (RSA) software to determine MTPM.

RESULTS

 At 1 year, mean MTPM of 0.35 mm was significantly below 0.5 mm (P < 0.001). MTPM was not strongly correlated to varus baseplate alignment up to 9° (r = 0.12, 95% confidence interval -0.22 to 0.44). Equivalence analyses revealed that MTPM, Forgotten Joint Score, Oxford Knee Score, and maximum flexion for the sBS MC insert were comparable with the I MC insert.

CONCLUSION

 Using the new BS MC insert with PCL retention, the tibial baseplate was stable at the group level at 1 year. Baseplate stability was not strongly related to varus baseplate and limb alignment. Comparable patient-reported outcome scores and maximum flexion/extension at 1 year were shown between the 2 insert designs.

Calipered Kinematically Aligned Medial Unicompartmental Knee Arthroplasty: A Surgical Technique

This study presents a surgical technique for kinematically aligned medial unicompartmental knee arthroplasty with the MOTO (Medacta Corporate, Switzerland) partial knee implant. This technique aims to replicate the native medial femoral and tibial morphology by providing caliper-verified bone resections and kinematic alignment principles. The paper provides a comprehensive overview of the surgical steps and discusses the implications for implant longevity.

The location of the centre of the proximal quadriceps tendon in kinematically aligned total knee arthroplasty is not associated with poor outcome scores or symptomatic patellar instability

Purpose

A previous study on osteoarthritic knees found that the average position of the centre of the proximal quadriceps tendon (PQT) was 9 mm lateral from the native trochlear groove. In patients with lateral patellar facet osteoarthritis, which indicates patellofemoral instability, the average location was 21 mm. The researchers suggested that a position more lateral than 20 mm might lead to poor outcomes after kinematically aligned total knee arthroplasty (KA TKA)-the current study aimed to test this hypothesis.

Methods

The study involved all patients (n = 302) who underwent KA TKA (n = 313) in 2019, had a post-operative long-leg scanogram and knee computed tomography scan, and completed a 2-year questionnaire. An evaluator measured the location of the PQT relative to the centre of the distal prosthetic trochlear groove. A Spearman's rank correlation coefficient analysis determined whether there was an association between the location of the PQT and the Forgotten Joint Score (FJS) and Oxford Knee Score (OKS) at 2 years.

Results

The mean location of the PQT was 11 ± 8 mm (range, -2 medial to 36 mm lateral), with 16% (N = 46) of the KA TKAs having a more lateral location than 20 mm. The location of the PQT was not associated with the FJS (r = -0.0349, p = 0.7281) and OKS (r = -0.0641, p = 0.9009)-no patient response indicated symptoms or operative treatment for patellofemoral instability.

Conclusion

Even though 16% of patients with a KA TKA had a more lateral location than 20 mm, there is no reason to measure the centre of the PQT relative to the distal prosthetic groove. This is because the location did not show any association with the 2-year FJS and OKS nor had any patient experienced patellofemoral instability.

Level of Evidence

IV.

Robotic assessment of patella tracking in total knee arthroplasty

OBJECTIVES

Robotic tools have been developed to improve planning, accuracy and outcomes in total knee arthroplasty (TKA). The purpose of this study was to describe and illustrate a novel technique for assessing the patellofemoral (PFJ) in TKA using an imageless robotic platform.

METHODS

A consecutive series of 30 R-TKA was undertaken by a single surgeon utilising the described technique. A technique to dynamically assess the PFJ intra-operatively, pre- and post-implantation was developed. A full set of data from 9 cases was then collected and reviewed for analysis. A series of dynamic PFJ tracks collected intra-operatively pre- and post-implantation are presented. Furthermore, a full assessment of PFJ over and under-stuffing through a 90° arc of flexion is illustrated. Finally, a pre- and post-centre of rotation for the PFJ was defined and measured.

RESULTS

The described technique was defined over a series of 30 R-TKA using the described robotic platform. Nine cases were analysed to determine what data could be measured using the robotic platform. Intra-operative real-time data allowed a visual assessment of PFJ tracking through a range of motion of 0°-90° flexion pre- and post-implantation. PFJ over and under-stuffing was also assessed intra-operatively through a range of motion of 0°-90° flexion. Post-operative analysis allowed a more detailed study to be performed, including defining a pre- and post-implantation centre of rotation (COR) for the patella. Defining the COR allowed the definition of a patella plane. Furthermore, patella mediolateral shift in full extension, and end flexion could be measured.

CONCLUSION

Intra-operative assessment of the PFJ in TKA is challenging. Robotic tools have been developed to improve measurement, accuracy of delivery and outcomes in TKA. These tools can be adapted in novel ways to assess the PFJ, which may lead to further refinements in TKA techniques.

Similar Recovery Rate for Patients Aged between 50 and 89 Years That Go Home on the Surgery Day and Self-Administer Their Rehabilitation after Kinematically Aligned Total Knee Arthroplasty

BACKGROUND

for kinematic alignment (KA) total knee arthroplasty (TKA), it was unknown whether 'the pace of recovery' at six weeks was different for patients with ages ranging between 50-59, 60-69, 70-79, and 80-89 years who were discharged on the surgery day and self-administered their rehabilitation.

METHODS

a single surgeon treated 206 consecutive patients with a KA-designed femoral component and an insert with a medial ball-in-socket, lateral flat articulation, and PCL retention. Each filled out preoperative and six-week Oxford Knee Score (OKS), Knee Society Score (KSS), Knee Function Score (KFS), and Knee Injury and Osteoarthritis Outcome Score for Joint Replacement (KOOS, JR) questionnaires. The six-week minus preoperative value indicated improvement.

RESULTS

between age cohorts, the improvement was not different (p = 0.2319 to 0.9888). The mean improvement/six-week postoperative value was 6°/-2° for knee extension, 0°/119° for knee flexion, 7/31 for the OKS, 39/96 for the KSS, 7/64 for the KFS, and 13/62 for the KOOS. The 30-day hospital readmission rate was 1%.

CONCLUSION

surgeons who perform KA TKA can counsel 50 to 89-year-old patients that they can be safely discharged home on the surgery day with a low risk of readmission and can achieve better function at six weeks than preoperatively when performing exercises without a physical therapist.

Calipered kinematic alignment restored the arithmetic hip-knee-ankle angle, achieved high satisfaction and improved clinical outcomes

PURPOSE

The purpose of this study was to determine whether unrestricted calipered kinematic alignment (KA), coupled with a medial-stabilised (MS) implant system, can reproduce the patient's constitutional alignment as per the arithmetic hip-knee-ankle (aHKA) and improve clinical outcomes.

METHODS

One-hundred and ninety-three patients received total knee arthroplasty by the senior author. To determine whether the constitutional alignment was achieved, the postoperative hip-knee-ankle (HKA) alignment was compared against the aHKA. Range of motion (ROM) was determined preoperative and postoperatively at 6 months and 2 years by measuring the active flexion and extension. Patient-Reported Outcomes Measures (PROMs) including Oxford Knee Score (OKS), Knee Injury and Osteoarthritis Outcome Score (KOOS), Forgotten Joint Score (FJS) and Visual Analogue Scale for Satisfaction were also completed. The Sports and Recreation component of KOOS was used to assess the patient's ability to return to sports and daily activities.

RESULTS

There was a strong correlation between postoperative HKA and aHKA (r = 0.7, p < 0.05). There was a significant improvement in both extension and flexion seen from as early as 6 months postoperatively, with a mean flexion of 123° ± 11° and extension of 1° ± 3° at 2 years. PROMs had significant improvements with a mean score of 42.8 ± 6.0 for the OKS and all KOOS subscales consisting of Symptoms (88.0 ± 11.7), Pain (91.4 ± 11.6), Activities of Daily Living (91.1 ± 12.4), Sports (76.8 ± 22.1) and Quality of Life (83.0 ± 19.1). The FJS had significant improvements from 6 months to 2 years of 19.9 (p < 0.05), with a mean score of 69.2 ± 26.6 at 2 years. Ninety-three percent (180 patients) were classified as 'satisfied' at the 2-year timepoint. The KOOS Sports component was completed by 64% (124 patients), whereby the mean age was younger than the noncompliant patients (67.7 ± 9.4 vs. 71.7 ± 8.2 years).

CONCLUSION

Unrestricted calipered KA can result in an alignment that closely resembles the patient's constitutional alignment, as per the aHKA. This resulted in improved knee ROM and patient satisfaction, as well as assisting younger patients to return to sports and daily activities.

LEVEL OF EVIDENCE

Level IV.

Accurate surgical posterior tibial slope alteration can be achieved in total knee arthroplasty regardless of surgeon skill level or local soft tissue thickness-A retrospective radiograph-based study

PURPOSE

To retrospectively report on the impact of local soft tissue thickness and surgeon skill level on the accuracy of surgical posterior tibial slope (PTS) alteration achieved in patients undergoing total knee arthroplasty (TKA) utilising lateral knee radiographs.

METHODS

Pre- and postoperative radiographs of 82 patients undergoing primary TKA using conventional mechanical alignment technique were measured by two observers and subjected to quality criteria for accurate measurement of the PTS. All patients underwent a standardised surgical approach for PTS alteration: cruciate-retaining (CR) cases with preoperative PTS ≤ 10° were set for reconstruction of the preoperative PTS. Cases indicated for posterior-stabilised (PS) design and/or with a preoperative PTS > 10° were set for 3° of postoperative PTS. Pretibial subcutaneous fat (PSF) and surgeon skill level were analysed for their predictive quality regarding the accuracy of surgical PTS alteration achieved.

RESULTS

The overall mean postoperative PTS was significantly lower than the preoperative values (6.2°, SD 2.7 vs. 7.7°, SD 3.2; p = 0.002103). Neither local soft tissue thickness, namely PSF, nor surgeon skill level was found to be a predictor of the accuracy of surgical PTS alteration achieved. Among cases set for PTS reconstruction, 25.9% and 42.6% achieved a postoperative PTS within ±1° and ±2° of preoperative values, respectively. In patients with a PTS > 10° or those indicated for PS design, slope reduction was achieved with a mean postoperative PTS of 6.5°. Furthermore, 14.3% and 32.1% of cases were within ±1° and ±2° of 3, respectively.

CONCLUSION

This study demonstrates that accurate surgical alteration of the PTS is possible in TKA regardless of local knee soft tissue thickness or surgeon skill level. This proves the clinical feasibility of both targeted reduction as well as reconstruction of the PTS in TKA.

LEVEL OF EVIDENCE

Level III, retrospective cohort study.

Better forgotten joint scores when the angle of the prosthetic trochlea is lateral to the quadriceps vector in kinematically aligned total knee arthroplasty

PURPOSE

The primary aim was to analyze unrestricted kinematic alignment (unKA) total knee arthroplasty (TKA) and determine the frequency of medial deviation of the prosthetic trochlear angle (PTA) of the femoral component relative to the quadriceps vector (QV) that terminates at the anterior inferior iliac spine (AIIS), and whether patients with medial deviation had a worse Forgotten Joint Score (FJS) and Oxford Knee Score (OKS) relative to those with lateral deviation. The secondary aim was to determine the frequency of medial deviation for mechanical alignment (MA) TKA simulations.

METHODS

From a database of a single surgeon, the study extracted de-identified data on 147 patients with a CT scanogram showing the pelvis and AIIS, a limb with an unKA TKA, and a native (i.e., healthy) opposite limb. On the scanogram, an examiner, blinded to the PROMs, measured the PTA-QV angle on the unKA TKA and on the opposite limb simulated MA TKA by drawing the PTA at 6° valgus relative to the femoral mechanical axis and measuring the PTA-QV angle.

RESULTS

Medial deviation of the PTA occurred in 86% of patients with unKA TKA, and the 126 with medial deviation had a 17/1 point worse median FJS/OKS than the 21 with lateral deviation at a mean follow-up of 47 ± 8 months, respectively (p < 0.0001, p = 0.0053). In addition, 21%, 17%, and 8% of MA TKA had medial deviation after radiographic simulation using reported surgical errors for manual, patient-specific, and robotic instrumentation, respectively.

CONCLUSION

In most patients with unKA TKA and a smaller proportion with MA TKA, a PTA of 6° valgus was medial to the QV, which, by excluding the patient's Q-angle, might alter patellofemoral kinematics like an incorrectly oriented trochleoplasty. The 17-point worse FJS in the patients with an unKA TKA and medial deviation of the PTA suggests the surgical target should be to orient the PTA lateral to the QV.

LEVEL OF EVIDENCE

IV.

A Torn or Reconstructed Anterior Cruciate Ligament Does Not Adversely Affect Clinical Outcome Scores and the Incidence of Reoperation After Unrestricted Kinematically Aligned Total Knee Arthroplasty

BACKGROUND

There are no reports as to whether the condition of the anterior cruciate ligament (ACL) adversely affects the 2 to 3 year function and reoperation risk of a kinematically aligned (KA) total knee arthroplasty (TKA) performed with posterior cruciate ligament (PCL) retention and an intermediate medial conforming (MC) insert.

METHODS

A single surgeon's prospective database query identified 418 consecutive primary TKAs performed between January 2019 and December 2019. The surgeon recorded the ACL condition in the operative note. Patients filled out the Forgotten Joint Score (FJS), Oxford knee score (OKS), and Knee Injury and Osteoarthritis Outcome Scores for Joint Replacement at the final follow-up. There were 299 patients with an intact ACL, 99 with a torn ACL, and 20 with a reconstructed ACL. The mean follow-up was 31 months (range, 20 to 45).

RESULTS

The median FJS, OKS, and Knee Injury and Osteoarthritis Outcome Score (KOOS) of the reconstructed/torn/intact KA TKAs were 90/79/67, 47/44/43, and 92/88/80 points, respectively. The median OKS and KOOS of the reconstructed ACL cohort were 4 and 11 points higher than in the intact ACL cohort (P = .003, .04). One patient who had a reconstructed ACL underwent manipulation under anesthesia (MUA) for stiffness. The 5 reoperations in the intact ACL cohort were for instability (n = 2), revision after failed MUA for stiffness (n = 2), and infection (n = 1).

CONCLUSION

These results suggest that patients who have a torn and reconstructed ACL can expect high function and a low risk of reoperation comparable to patients who have an intact ACL when treated with unrestricted, caliper-verified KA, PCL retention, and an intermediate MC insert.

A comparison of robotic-assisted and manual techniques in restricted kinematically aligned total knee arthroplasty: coronal alignment improvement with no significant clinical differences

PURPOSE

The purpose of this study was to compare radiographic and clinical outcomes of robotic-assisted and conventional manual techniques in restricted kinematically aligned TKA.

METHODS

Patients who underwent either manual or robotic-assisted restricted kinematically aligned TKA between 2019 and 2020 were included in this retrospective comparative study. Radiographic outcomes comprised coronal plane measurements performed through standing full-length anteroposterior radiographs. The Knee Injury and Osteoarthritis Outcome Score (KOOS), Oxford score, Visual Analog Scale pain and satisfaction score, and Forgotten Joint Score were used to determine the clinical outcome. The continuous data were compared by Student's t test according to the Kolmogorov‒Smirnov normality test.

RESULTS

The manual group consisted of 46 patients (38 females, eight males) with a mean age of 68.1 years, and the robotic group consisted of 70 patients (58 females, 12 males) with a mean age of 65.7 years (n.s.). Preoperatively, no significant difference was observed between groups concerning demographic characteristics, radiographic measurements, and clinical scores except for the symptom and pain domains of the KOOS score, which was significantly worse in the manual group (p = 0.011 and 0.035, respectively). At the postoperative 2-year follow-up, we observed significant differences between groups with respect to the mean HKA angle, mMPTA, and mLDFA (p = 0.034, 0.041, and 0.005, respectively). A comparison of clinical scores at the postoperative 2-year follow-up demonstrated no significant differences between groups.

CONCLUSION

The current study demonstrated that using robotic-assisted technique for restricted kinematically aligned total knee arthroplasty (TKA) resulted in significantly better outcomes compared to the conventional manual technique in achieving normal ranges of lower extremity coronal alignment measurements. While the robotic-assisted group demonstrated better clinical scores, there was no statistically significant difference in clinical outcomes between the robotic-assisted group and the control group at the two-year follow-up. Concerning clinical relevance, the restoration of original anatomy and coronal alignment, a crucial concern in restricted kinematically aligned TKA, may be better achieved by the robotic-assisted technique.

LEVEL OF EVIDENCE

Level III (Retrospective cohort study).

Comparable accuracy of femoral joint line reconstruction in different kinematic and functional alignment techniques

PURPOSE

A key part of kinematic alignment (KA) and functional alignment (FA) is to restore the natural femoral joint line, in particular the medial joint line. KA is known to reproduce the femoral joint line accurately; however, direct comparisons with other surgical techniques such as FA are currently lacking. The purpose of this study was to evaluate differences of alignment parameters in KA and FA techniques with a special focus given to the femoral joint line.

METHODS

We performed a retrospective radiological analysis of pre- and postoperative long leg radiographs of 221 consecutive patients with varus or neutral leg alignment, who underwent primary total knee arthroplasty (TKA) procedures from 2018 to 2020. Patients were assigned to one of four groups: (1) FA: image-based robotic-assisted TKA, (2) FA: imageless robotic-assisted TKA, (3): restricted KA: 3D cutting block-assisted (patient-specific instruments, PSI) TKA, (4): unrestricted KA: calipered technique. Patients' radiographs were (re)-analyzed for overall limb alignment, medial proximal tibial angle (MPTA), lateral distal femoral angle (LDFA), as well as medial and lateral femoral joint line alteration. Statistical significance was determined using unpaired t testing (FA vs. KA group) and one-way ANOVA (subgroup analyses).

RESULTS

Comparisons of KA vs. FA, as well as individual subgroups of KA and FA did not show any differences in the accuracy of medial joint line reconstruction (< 2 mm, p = 0.384, p = 0.744, respectively) and LDFA alteration (< 2°, p = 0.997, 0.921, respectively). Correction of MPTA (3.4° vs. 2.2°) and lateral femoral joint line (2.1 mm vs. 1.5 mm) was higher for FA and FA subgroups compared to KA and KA subgroups (both p < 0.001).

CONCLUSION

Kinematic and functional alignments showed a comparable accuracy in reconstruction of the medial femoral joint line and femoral joint line orientation. Increased correction of MPTA and lateral femoral joint line was recorded with FA techniques.

LEVEL OF EVIDENCE

III.

Ball-in-socket medial conformity with posterior cruciate ligament retention neither limits internal tibial rotation and knee flexion nor lowers clinical outcome scores after unrestricted kinematically aligned total knee arthroplasty

PURPOSE

For a new tibial insert design with ball-in-socket (B-in-S) medial conformity (MC), posterior cruciate ligament (PCL) retention, and flat lateral articular surface (B-in-S MC + PCL), this study determined whether internal tibial rotation and knee flexion were limited and clinical outcome scores were lower during weight-bearing activities relative to an insert with intermediate (I) (i.e., less than ball-in-socket) medial conformity (I MC + PCL).

METHODS

Twenty-five patients were treated with bilateral unrestricted, caliper-verified kinematic alignment (KA) total knee arthroplasty (TKA) with an I MC + PCL insert and B-in-S MC + PCL insert in opposite knees. Each patient performed weight-bearing deep knee bend, step up, and chair rise under single-plane fluoroscopy. Analysis following 3D model-to-2D image registration determined internal tibial rotation. For each TKA, knee flexion was measured and patients completed clinical outcome scoring questionnaires.

RESULTS

Internal tibial rotation did not differ between conformities during chair rise and step up (p = 0.3419 and 0.1030, respectively). During deep knee bend, internal tibial rotation between 90° and maximum flexion was 3° greater in the B-in-S MC + PCL group (18° vs 15°) (p = 0.0290). Mean knee flexion (p = 0.3115) and median Forgotten Joint Score (FJS), Oxford Knee Score (OKS), and Western Ontario and McMasters Universities Arthritis Index (WOMAC) scores (p = 0.2100, 0.2154, and 0.4542, respectively) did not differ between conformities.

CONCLUSION

An insert with ball-in-socket medial conformity, which maximizes anteroposterior (AP) stability, did not limit internal tibial rotation and knee flexion and did not lower patient-reported outcomes when implanted with unrestricted caliper-verified KA and PCL retention. The high AP stability provided by the medial ball-in-socket might interest those surgeons exploring the treatment of the active patient with a desire to return to high-level and athletic activities.

The Trochlear Groove of a Femoral Component Designed for Kinematic Alignment Is Lateral to the Quadriceps Line of Force and Better Laterally Covers the Anterior Femoral Resection Than a Mechanical Alignment Design

Background: A concern about kinematically aligned (KA) total knee arthroplasty (TKA) is that it relies on femoral components designed for mechanical alignment (MAd-FC) that could affect patellar tracking, in part, because of a trochlear groove orientation that is typically 6° from vertical. KA sets the femoral component coincident to the patient’s pre-arthritic distal and posterior femoral joint lines and restores the Q-angle, which varies widely. Relative to KA and the native knee, aligning the femoral component with MA changes most distal joint lines and Q-angles, and rotates the posterior joint line externally laterally covering the anterior femoral resection. Whether switching from a MAd- to a KAd-FC with a wider trochlear groove orientation of 20.5° from vertical results in radiographic measures known to promote patellar tracking is unknown. The primary aim was to determine whether a KAd-FC sets the trochlear groove lateral to the quadriceps line of force (QLF), better laterally covers the anterior femoral resection, and reduces lateral patella tilt relative to a MAd-FC. The secondary objective was to determine at six weeks whether the KAd-FC resulted in a higher complication rate, less knee extension and flexion, and lower clinical outcomes. Methods: Between April 2019 and July 2022, two surgeons performed sequential bilateral unrestricted caliper-verified KA TKA with manual instruments on thirty-six patients with a KAd- and MAd-FC in opposite knees. An observer measured the angle between a line best-fit to the deepest valley of the trochlea and a line representing the QLF that indicated the patient’s Q-angle. When the trochlear groove was lateral or medial relative to the QLF, the angle is denoted + or −, and the femoral component included or excluded the patient’s Q-angle, respectively. Software measured the lateral undercoverage of the anterior femoral resection on a Computed Tomography (CT) scan, and the patella tilt angle (PTA) on a skyline radiograph. Complications, knee extension and flexion measurements, Oxford Knee Score, KOOS Jr, and Forgotten Joint Score were recorded pre- and post-operatively (at 6 weeks). A paired Student’s T-test determined the difference between the KA TKAs with a KAd-FC and MAd-FC with a significance set at p < 0.05. Results: The final analysis included thirty-five patients. The 20.5° trochlear groove of the KAd-FC was lateral to the QLF in 100% (15 ± 3°) of TKAs, which was greater than the 69% (1 ± 3°) lateral to the QLF with the 6° trochlear groove of the MAd-FC (p < 0.001). The KAd-FC’s 2 ± 1.9 mm lateral undercoverage of the anterior femoral resection was less than the 4.4 ± 1.5 mm for the MAd-FC (p < 0.001). The PTA, complication rate, knee extension and flexion, and clinical outcome measures did not differ between component designs. Conclusions: The KA TKA with a KAd-FC resulted in a trochlear groove lateral to the QLF that included the Q-angle in all patients, and negligible lateral undercoverage of the anterior femoral resection. These newly described radiographic parameters could be helpful when investigating femoral components designed for KA with the intent of promoting patellofemoral kinematics.

Low tibial baseplate migration 1 year after unrestricted kinematically aligned total knee arthroplasty using a medial conforming implant design

PURPOSE

Varus alignment of the tibial baseplate and limb > 3° might adversely affect baseplate fixation after total knee arthroplasty (TKA), especially for unrestricted kinematically aligned (KA) TKA which aligns a majority of baseplates in varus. The purposes of this study were to determine whether baseplate migration at 1 year (1) was significantly less than a stability limit of 0.5 mm, (2) increased over time, and (3) was related to varus alignment of the baseplate and limb after unrestricted KA TKA.

METHODS

Thirty-five patients underwent unrestricted KA TKA using a fixed-bearing, cemented, medial conforming tibial insert with posterior cruciate ligament retention. Using model-based radiostereometric analysis, maximum total point motion (MTPM) (i.e., largest displacement on the baseplate) was computed at 6 weeks, 3 months, 6 months, and 1 year postoperatively relative to the day of surgery. Baseplate and limb alignment were measured postoperatively on long-leg CT scanograms.

RESULTS

At 1 year, mean MTPM of 0.35 mm was significantly less than the 0.5 mm stability limit (p = 0.0002). Mean MTPM did not increase from 6 weeks to 1 year (p = 0.3047). Notably, 89% (31/35) of tibial baseplates and 46% (16/35) of limbs were > 3° varus. Baseplate and limb alignment had no relationship to MTPM at 1 year (|r|≤ 0.173, p ≥ 0.3276).

CONCLUSION

Low and non-progressive tibial baseplate migration 1 year after unrestricted KA TKA with a medial conforming design should allay any concern that unrestricted KA TKA increases risk of baseplate loosening due to varus alignment of the baseplate and limb.

LEVEL OF EVIDENCE

Level II, therapeutic prospective cohort study.

Six Commonly Used Postoperative Radiographic Alignment Parameters Do Not Predict Clinical Outcome Scores after Unrestricted Caliper-Verified Kinematically Aligned TKA

Background: Unrestricted caliper-verified kinematically aligned (KA) TKA restores patient’s prearthritic coronal and sagittal alignments, which have a wide range containing outliers that concern the surgeon practicing mechanical alignment (MA). Therefore, knowing which radiographic parameters are associated with dissatisfaction could help a surgeon decide whether to rely on them as criteria for revising an unhappy patient with a primary KA TKA using MA principles. Hence, we determined whether the femoral mechanical angle (FMA), hip–knee–ankle angle (HKAA), tibial mechanical angle (TMA), tibial slope angle (TSA), and the indicators of patellofemoral tracking, including patella tilt angle (PTA) and the lateral undercoverage of the trochlear resection (LUCTR), are associated with clinical outcome scores. Methods: Forty-three patients with a CT scan and skyline radiograph after a KA TKA with PCL retention and medial stabilized design were analyzed. Linear regression determined the strength of the association between the FMA, HKA angle, PTS, PTA, and LUCTR and the forgotten joint score (FJS), Oxford knee score (OKS), and KOOS Jr score obtained at a mean of 23 months. Results: There was no correlation between the FMA (range 2° varus to −10° valgus), HKAA (range 10° varus to −9° valgus), TMA (range 10° varus to −0° valgus), TSA (range 14° posterior to −4° anterior), PTA (range, −10° medial to 14° lateral), and the LUCTR resection (range 2 to 9 mm) and the FJS (median 83), the OKS (median 44), and the KOOS Jr (median 85) (r = 0.000 to 0.079). Conclusions: Surgeons should be cautious about using postoperative FMA, HKAA, TMA, TSA, PTA, and LUCTR values within the present study’s reported ranges to explain success and dissatisfaction after KA TKA.

A TKA Insert with A Lateral Flat Articular Surface Maximizes External and Internal Tibial Orientations without Anterior Lift-Off Relative to Low- and Ultracongruent Surfaces

Background: In total knee arthroplasty (TKA), inserts can have different levels of medial and lateral congruency determined by the acuteness of the upslopes of the anterior and posterior articular surfaces. The present study evaluated an insert with different levels of lateral congruency and a medial ball-in-socket congruency to test the hypothesis that a lateral flat (F) insert maximizes external tibial orientation at extension and internal orientation at 90° flexion and lowers the incidence of anterior lift-off relative to low-congruent (LC) and ultracongruent (UC) lateral inserts. Methods: Two surgeons treated 23 patients with unrestricted caliper-verified kinematic alignment (KA) and posterior cruciate ligament (PCL) retention. They randomly trialed inserts with a medial radial dial that functioned as a built-in goniometer by measuring the tibial orientation relative to a sagittal line on the femoral trial component. Anterior lift-off of the insert from the baseplate indicated PCL tightness. Results: The F insert’s mean of 9° of external tibial orientation was higher than that of the LC (5°, p < 0.0001) and UC inserts (2°, p < 0.0001). The −13° of internal tibial orientation at 90° flexion was higher than that of the LC (−9°, p < 0.0001) and UC inserts (−7°, p < 0.0001). The 0% incidence of anterior lift-off was less than that of the LC (26%) and UC inserts (57%) (p < 0.0001). Conclusions: Surgeons and implant manufacturers should know that adding congruency to the lateral articular surface limits external tibial orientation in extension and internal tibial orientation at 90° flexion and overtightens the PCL. These rotational limitations and flexion space tightness can adversely affect patellofemoral tracking and knee flexion.

A Surgeon That Switched to Unrestricted Kinematic Alignment with Manual Instruments Has a Short Learning Curve and Comparable Resection Accuracy and Outcomes to Those of an Experienced Surgeon

After starting an orthopedic practice, a surgeon with a fellowship in mechanically aligned (MA) TKA initiated this study to characterize their learning curve after they switched to unrestricted kinematic alignment (KA) TKA using manual instruments. Accordingly, the present study determined for the inexperienced (IE) surgeon the number of cases required to achieve consistent femoral resections and operating times, and whether the femoral resection accuracy, patient-reported outcome measures (PROMs), and component alignment were different from an experienced (E) surgeon. This prospective cohort study analyzed the IE surgeon’s first 30 TKAs, all performed with KA, and 30 consecutive KA TKAs performed by an E surgeon. The resection accuracy or deviation was the calipered thickness of the distal and posterior medial and lateral femoral resections minus the planned resection thickness, which was the thickness of the corresponding condyle of the femoral component, minus 2 mm for cartilage wear, and 1 mm for the kerf of the blade. Independent observers recorded the femoral resection thickness, operative times, PROMs, and alignment. For each femoral resection, the deviation between three groups of patients containing ten consecutive KA TKAs, was either insignificant (p = 0.695 to 1.000) or within the 0.5 mm resolution of the caliper, which indicated no learning curve. More than three groups were needed to determine the learning curve for the operative time; however, the IE surgeon’s procedure dropped to 77 min for the last 10 patients, which was 20 min longer than the E surgeon. The resection deviations of the IE and E surgeon were comparable, except for the posterolateral femoral resection, which the IE surgeon under-resected by a mean of −0.8 mm (p < 0.0001). At a mean follow-up of 9 and 17 months, the Forgotten Joint Score, Oxford Knee Score, KOOS, and the alignment of the components and limbs were not different between the IE and E surgeon (p ≥ 0.6994). A surgeon that switches to unrestricted KA with manual instruments can determine their learning curve by computing the deviation of the distal and posterior femoral resections from the planned resection. Based on the present study, an IE surgeon could have resection accuracy, post-operative patient outcomes, and component alignment comparable to an E surgeon.