Women and men with hip fractures have a longer femoral neck moment arm and greater impact load in a sideways fall

Femur geometry and body composition influence femoral neck stresses: A combined fall simulation and beam modelling approach

Metrics of femur geometry and body composition have been linked to clinical hip fracture risk. Mechanistic explanations for these relationships have generally focused on femur strength; however, impact loading also modulates fracture risk. We evaluated the potential effects of femur geometry and body composition on femoral neck stresses during lateral impacts. Fifteen female volunteers completed low-energy sideways falls on to the hip. Additionally, participants completed ultrasound and dual-energy x-ray absorptiometry imaging to characterize trochanteric soft tissue thickness (TSTT) over the hip and six metrics of femur geometry, respectively. Subject-specific beam models were developed and utilized to calculate peak femoral neck stress (σ_Neck), utilizing experimental impact dynamics. Except for femoral neck axis length, all metrics of femur geometry were positively correlated with σ_Neck (all p < 0.05). Larger/more prominent proximal femurs were associated with increased force over the proximal femur, whereas a wider neck-shaft angle was associated with greater stress generation independent of force (all p < 0.05). Body mass index (BMI) and TSTT were negatively correlated with σ_Neck (both p < 0.05). Despite strong correlations, these metrics of body composition appear to influence femoral neck stresses through different mechanisms. Increased TSTT was associated with reduced force over the proximal femur, whereas increased BMI was associated with greater resistance to stress generation (both p < 0.05). This study provided novel insights into the mechanistic pathways through which femur geometry and body composition may modulate hip fracture risk. Our findings complement clinical findings and provide one possible explanation for incongruities in the clinical fracture risk and femur strength literature.

Assessment of the multifactorial causes of atypical femoral fractures using a novel multiscale finite element approach

Atypical femoral fracture (AFF), which is a low energy fracture in the subtrochanteric or diaphysis region of the femur, has multifactorial causes that span macro- to microscale mechanisms including femoral geometry, cortical bone composition and structure. However, the extent of individual and combined influence of these factors on AFF is still not well understood. As a result, the aim of this study is to develop a multiscale fracture mechanics-based finite element modeling framework that is capable of quantifying the individual and combined influence of macroscale femoral geometrical properties as well as cortical bone microscale material properties and structure on AFF. In this study, three different femoral geometries with two different cortical bone microstructures, and two different material property distributions were investigated by first determining the critical AFF locations in the femur using macroscale stress analysis and then performing coupled macro-microscale fracture simulations. The simulation results showed that femoral geometry led to substantial differences in crack growth independent of cortical microstructure and tissue level material properties. The results suggest that multiple femoral geometrical properties, including neck-shaft angle and curvature, may contribute to the fracture behavior at AFF sites rather than a single macroscale geometrical feature. Osteonal area had a significant effect on microcrack propagation at AFF sites independent of microscale material property distribution and femoral geometry. In addition, cortical bone tissue level material heterogeneity improved the fracture resistance independent of femoral geometry and cortical microstructure. In summary, the computational approach developed in this study identified the individual, combined, and relative influence of multiscale factors on AFF risk. The new framework developed in this study could help identify the governing multiscale mechanisms of AFF and bring additional insight into the possible association of long-term bisphosphate treatment with AFF.

Pelvis and femur geometry: Relationships with impact characteristics during sideways falls on the hip

While metrics of pelvis and femur geometry have been demonstrated to influence hip fracture risk, attempts at linking geometry to underlying mechanisms have focused on fracture strength. We investigated the potential effects of femur and pelvis geometry on applied loads during lateral falls on the hip. Fifteen female volunteers underwent DXA imaging to characterize two pelvis and six femur geometric features. Additionally, participants completed low-energy sideways falls on the hip; peak impact force and pressure, contact area, and moment of force applied to the proximal femur were extracted. No geometric feature was significantly associated with peak impact force. Peak moment of force was significantly associated with femur moment arm (p = 0.005). Peak pressure was positively correlated with pelvis width and femur moment arm (p < 0.05), while contact area was negatively correlated with metrics of pelvis width and femur neck length (p < 0.05). This is the first study to link experimental measures of impact loads during sideways falls with image-based skeletal geometry from human volunteers. The results suggest that while skeletal geometry has limited effects on overall peak impact force during sideways falls, it does influence how impact loads are distributed at the skin surface, in addition to the bending moment applied to the proximal femur. These findings have implications for the design of protective interventions (e.g. wearable hip protectors), and for models of fall-related lateral impacts that could incorporate the relationships between skeletal geometry, external load magnitude/distribution, and tissue-level femur loads.

Non-BMD DXA measurements of the hip

Hip fracture is one of the most serious complications of osteoporosis. More than 50% of hip and other fractures occur in patients without densitometric osteoporosis. Therefore, areal bone mineral density (aBMD) may not be the best way to assess fracture risk. In order to improve assessment of fracture risk, many other approaches have been taken. At the present time, the Fracture Risk Algorithm (FRAX©) is one of the most notable ways to improve assessment of fracture risk. However, since early in the initiation of the dual energy x-ray absorptiometry (DXA) era, several non-BMD DXA approaches to the assessment of hip fracture risk have been proposed. This review will cover some of those methodologies, including hip-axis length (HAL), hip-structural analysis (HSA), finite element analysis (FEA) by DXA, and body composition of the thigh by DXA (BCT). These methods have been utilized in models of hip fracture occurrence and in pharmacological clinical trials. How they should be used in clinical practice or if they should be used in clinical practice is more of an issue. In addition, we will discuss the recent proposal of the use of Long Femur Scan Field in the effort to diagnose atypical femoral fractures.

Adjusting Hip Fracture Probability in Men and Women Using Hip Axis Length: the Manitoba Bone Density Database

Most studies report that longer hip axis length (HAL) is associated with increased hip fracture risk in women, but comparable data in men are sparse. Using a registry of all dual-energy X-ray absorptiometry (DXA) results for Manitoba, Canada, we identified 4738 men and 50,420 women aged 40 yr and older with baseline hip DXA results, HAL measurements, and Fracture Risk Assessment Tool (FRAX) hip fracture probability computed with femoral neck bone mineral density (BMD). Population-based health service records were assessed for a subsequent hospitalization with a primary diagnosis of hip fracture. During mean 6.2 yr of follow-up, 70 men and 1020 women developed incident hip fractures. Mean HAL was significantly greater in those with vs without incident hip fractures (men 123.0 ± 7.6 vs 121.3 ± 7.4 mm, p = 0.050; women 106.9 ± 6.2 vs 104.6 ± 6.2 mm, p < 0.001). When adjusted for age and femoral neck BMD, each millimeter increase in HAL increased hip fracture risk by 3.6% in men (p = 0.022) and 4.6% in women (p < 0.001); this association was unaffected by sex (p value for interaction = 0.477). When adjusted for log-transformed FRAX hip fracture probability, each millimeter increase in HAL increased hip fracture risk by 3.4% in men (p = 0.031) and 4.8% in women (p < 0.001); this association was again unaffected by sex (p interaction = 0.409). A bilinear adjustment applicable to both men and women was developed: relative increase in hip fracture probability 4.7% for every millimeter that HAL is above the sex-specific average, relative decrease in hip fracture probability 3.8% for every millimeter that HAL is below the sex-specific average. We concluded that greater DXA-derived HAL is associated with increased incident hip fracture risk in both men and women, and this risk is independent of BMD and FRAX probability.

Skeletal deterioration following ovarian failure: can some features be a direct consequence of estrogen loss while others are more related to physical inactivity?

Findings on experimental animals show that ovarian failure is accompanied by a decrease in motor activity. As mechanical loading has a vital role in the maintenance of skeletal health, our aim was to determine to what extent this decrease in motor activity contributes to ovariectomy-induced bone loss. Thirty-two female Wistar rats were ovariectomized or sham-operated and housed in standard cages or with access to running wheels for 36 weeks with their running distance monitored. Markers of bone turnover were assayed in the serum, and bone geometry, trabecular and cortical bone microarchitecture, mineralization degree, and biomechanical properties were assessed in the femur. Differences between groups were determined by one-way ANOVA. Although reduced motor activity and sex steroid deficiency both resulted in decreases in trabecular bone volume, trabecular number decreases were mostly associated with sex steroid deficiency, whereas trabecular thickness decreases were mostly associated with sedentary behavior. Cortical bone appeared to be more sensitive to variations in motor activity, whereas bone turnover rate and bone tissue mineralization degree seemed to be primarily affected by sex steroid deficiency, even though they were further aggravated by sedentary behavior. Increases in femur length were mostly a consequence of sex steroid deficiency, whereas femoral neck length was also influenced by sedentary behavior. Differences in mechanical properties resulted mostly from differences in physical activity. Both the direct effect of sex steroid deficiency and the indirect effect of motor activity changes are implicated in bone loss following ovariectomy.

Fracture Risk Prediction by Non-BMD DXA Measures: the 2015 ISCD Official Positions Part 1: Hip Geometry

Bone mineral density (BMD) measured by dual-energy X-ray absorptiometry is the current imaging procedure of choice to assess fracture risk. However, BMD is only one of the factors that explain bone strength or resistance to fracture. Other factors include bone microarchitecture and macroarchitecture. We now have the ability to assess some of these non-BMD parameters from a dual-energy X-ray absorptiometry image. Available measurements include various measurements of hip geometry including hip structural analysis, hip axis length, and neck-shaft angle. At the 2015 Position Development Conference, the International Society of Clinical Densitometry established official positions for the clinical utility of measurements of hip geometry. We present the official positions approved by an expert panel after careful review of the recommendations and evidence prepared by an independent task force. Each question addressed by the task force is presented followed by the official position with the associated medical evidence and rationale.

Ethnic differences in bone health

There are differences in bone health between ethnic groups in both men and in women. Variations in body size and composition are likely to contribute to reported differences. Most studies report ethnic differences in areal bone mineral density (aBMD), which do not consistently parallel ethnic patterns in fracture rates. This suggests that other parameters beside aBMD should be considered when determining fracture risk between and within populations, including other aspects of bone strength: bone structure and microarchitecture, as well as muscle strength (mass, force generation, anatomy) and fat mass. We review what is known about differences in bone-densitometry-derived outcomes between ethnic groups and the extent to which they account for the differences in fracture risk. Studies are included that were published primarily between 1994 and 2014. A "one size fits all approach" should definitely not be used to understand better ethnic differences in fracture risk.

Multiple loading conditions analysis can improve the association between finite element bone strength estimates and proximal femur fractures: a preliminary study in elderly women

This is a preliminary case-control study on osteopenic/osteoporotic elderly women, testing the association of proximal femur fracture with minimum femoral strength, as derived from finite element (FE) analysis in multiple loading conditions. Fracture cases (n=22) in acute conditions were enrolled among low-trauma fractures admitted in various hospitals in the Emilia Romagna Region, Italy. Women with no history of low-trauma fractures were enrolled as controls (n=33). Patients were imaged with DXA to obtain aBMD, and with a bilateral full femur CT scan. FE-strength was derived in stance and fall configurations: (i) as the minimum strength among those obtained for multiple loading conditions spanning a domain of plausible force directions, and (ii) as the strength associated to the most commonly used single loading conditions. The association of FE-strength and aBMD with fractures was tested with logistic regression models, deriving odds ratios (ORs) and area under the receiver operating characteristic curve (AUC). FE-strength from multiple loading conditions better classified fracture cases from controls (OR per SD change=9.6, 95% CI=3.0-31.3, AUC=0.87 in stance; OR=9.5, 95% CI=2.9-31.2, AUC=0.88 in fall) compared to aBMD (OR=3.6, 95% CI=1.6-8.2, AUC=0.79 for total femur aBMD), while FE-strength results from the most commonly used single loading conditions were similar to aBMD. Only FE-strength from multiple loading conditions remained significant in age- and aBMD-adjusted models (OR=10.5, 95% CI=1.8-61.3, AUC=0.95). In summary, we highlighted the importance of considering different loading conditions to identify bone weakness, and confirmed that femoral FE-strength estimates may add value to aBMD predictions in elderly osteopenic/osteoporotic women.

Bone quality: the determinants of bone strength and fragility

Bone fragility is a major health concern, as the increased risk of bone fractures has devastating outcomes in terms of mortality, decreased autonomy, and healthcare costs. Efforts made to address this problem have considerably increased our knowledge about the mechanisms that regulate bone formation and resorption. In particular, we now have a much better understanding of the cellular events that are triggered when bones are mechanically stimulated and how these events can lead to improvements in bone mass. Despite these findings at the molecular level, most exercise intervention studies reveal either no effects or only minor benefits of exercise programs in improving bone mineral density (BMD) in osteoporotic patients. Nevertheless, and despite that BMD is the gold standard for diagnosing osteoporosis, this measure is only able to provide insights regarding the quantity of bone tissue. In this article, we review the complex structure of bone tissue and highlight the concept that its mechanical strength stems from the interaction of several different features. We revisited the available data showing that bone mineralization degree, hydroxyapatite crystal size and heterogeneity, collagen properties, osteocyte density, trabecular and cortical microarchitecture, as well as whole bone geometry, are determinants of bone strength and that each one of these properties may independently contribute to the increased or decreased risk of fracture, even without meaningful changes in aBMD. Based on these findings, we emphasize that while osteoporosis (almost) always causes bone fragility, bone fragility is not always caused just by osteoporosis, as other important variables also play a major role in this etiology. Furthermore, the results of several studies showing compelling data that physical exercise has the potential to improve bone quality and to decrease fracture risk by influencing each one of these determinants are also reviewed. These findings have meaningful clinical repercussions as they emphasize the fact that, even without leading to improvements in BMD, exercise interventions in patients with osteoporosis may be beneficial by improving other determinants of bone strength.

Atypical femoral fractures, bisphosphonates, and mechanical stress

Atypical fractures are stress fractures occurring in the femoral shaft and closely related to bisphosphonate use. We here discuss their radiographic definition and different putative etiologies, apart from mechanical stress. Long time reduction of skeletal remodeling because of bisphosphonate use is thought to allow time for the bone to deteriorate mechanically, resulting in reduced toughness. However, the risk of atypical fracture diminishes rapidly after cessation of treatment, which suggests more acute effects of bisphosphonate use. Microdamage normally accumulates at areas of high stress. Possibly, ongoing bisphosphonate use reduces the ability to resorb and replace areas of microdamage by targeted remodeling. This could lead to crack propagation beyond a point of no return, ending in macroscopic stress fracture.

Femoral neck shaft angle width is associated with hip-fracture risk in males but not independently of femoral neck bone density

OBJECTIVE

To investigate the specificity of the neck shaft angle (NSA) to predict hip fracture in males.

METHODS

We consecutively studied 228 males without fracture and 38 with hip fracture. A further 49 males with spine fracture were studied to evaluate the specificity of NSA for hip-fracture prediction. Femoral neck (FN) bone mineral density (FN-BMD), NSA, hip axis length and FN diameter (FND) were measured in each subject by dual X-ray absorptiometry. Between-mean differences in the studied variables were tested by the unpaired t-test. The ability of NSA to predict hip fracture was tested by logistic regression.

RESULTS

Compared with controls, FN-BMD (p < 0.01) was significantly lower in both groups of males with fractures, whereas FND (p < 0.01) and NSA (p = 0.05) were higher only in the hip-fracture group. A significant inverse correlation (p < 0.01) was found between NSA and FN-BMD. By age-, height- and weight-corrected logistic regression, none of the tested geometric parameters, separately considered from FN-BMD, entered the best model to predict spine fracture, whereas NSA (p < 0.03) predicted hip fracture together with age (p < 0.001). When forced into the regression, FN-BMD (p < 0.001) became the only fracture predictor to enter the best model to predict both fracture types.

CONCLUSION

NSA is associated with hip-fracture risk in males but is not independent of FN-BMD.

ADVANCES IN KNOWLEDGE

The lack of ability of NSA to predict hip fracture in males independent of FN-BMD should depend on its inverse correlation with FN-BMD by capturing, as the strongest fracture predictor, some of the effects of NSA on the hip fracture. Conversely, NSA in females does not correlate with FN-BMD but independently predicts hip fractures.

Muscular adaptations and insulin-like growth factor-1 responses to resistance training are stretch-mediated

INTRODUCTION

Modulation of muscle characteristics was attempted through altering muscle stretch during resistance training. We hypothesized that stretch would enhance muscle responses.

METHODS

Participants trained for 8 weeks, loading the quadriceps in a shortened (SL, 0-50° knee flexion; n=10) or lengthened (LL, 40-90°; n=11) position, followed by 4 weeks of detraining. Controls (CON; n=10) were untrained. Quadriceps strength, vastus lateralis architecture, anatomical cross-sectional area (aCSA), and serum insulin-like growth factor-1 (IGF-1) were measured at weeks 0, 8, 10, and 12.

RESULTS

Increases in fascicle length (29±4% vs. 14±4%), distal aCSA (53±12% vs. 18±8%), strength (26±6% vs. 7±3%), and IGF-1 (31±6% vs. 7±6%) were greater in LL compared with SL muscles (P<0.05). No changes occurred in CON. Detraining decrements in strength and aCSA were greater in SL than LL muscles (P<0.05).

CONCLUSIONS

Enhanced muscle in vivo (and somewhat IGF-1) adaptations to resistance training are concurrent with muscle stretch, which warrants its inclusion within training.

Microstructural failure mechanisms in the human proximal femur for sideways fall loading

The etiology of hip fractures remains unclear but might be elucidated by an improved understanding of the microstructural failure mechanisms of the human proximal femur during a sideways fall impact. In this context, we biomechanically tested 12 cadaver proximal femurs (aged 76 ± 10 years; 8 female, 4 male) to directly measure strength for a sideways fall and also performed micro-computed tomography (CT)-based, nonlinear finite element analysis of the same bones (82-micron-sized elements, ∼120 million elements per model) to estimate the amount and location of internal tissue-level failure (by ductile yielding) at initial structural failure of the femur. We found that the correlation between the directly measured yield strength of the femur and the finite element prediction was high (R(2) = 0.94, p < 0.0001), supporting the validity of the finite element simulations of failure. In these simulations, the failure of just a tiny proportion of the bone tissue (1.5% to 6.4% across all bones) led to initial structural failure of the femur. The proportion of failed tissue, estimated by the finite element models, decreased with decreasing measured femoral strength (R(2) = 0.88, p < 0.0001) and was more highly correlated with measured strength than any measure of bone volume, mass, or density. Volume-wise, trabecular failure occurred earlier and was more prominent than cortical failure in all femurs and dominated in the very weakest femurs. Femurs with low measured strength relative to their areal bone mineral density (BMD) (by dual-energy X-ray absorptiometry [DXA]) had a low proportion of trabecular bone compared with cortical bone in the femoral neck (p < 0.001), less failed tissue (p < 0.05), and low structural redundancy (p < 0.005). We conclude that initial failure of the femur during a sideways fall is associated with failure of just a tiny proportion of the bone tissue, failure of the trabecular tissue dominating in the very weakest femurs owing in part to a lack of structural redundancy.

Gender differences in fascicular lengthening during eccentric contractions: the role of the patella tendon stiffness

AIM

Elastic tendons have been suggested to attenuate fascicle lengthening during eccentric contractions; however, there is no in vivo evidence to support this hypothesis. Therefore, the aim of this study was to determine whether patella tendon stiffness modulates vastus lateralis (VL) fascicle lengthening during eccentric contractions in males and females.

METHOD

Vastus lateralis and patella tendon properties were measured in males and females owing to previously reported intrinsic gender differences in tendon properties. During maximal voluntary eccentric knee extensions, VL fascicle lengthening and torque were recorded at every 10° (range of motion 20-90°).

RESULTS

A significant correlation between maximal patella tendon stiffness and change in fascicle length (r=0.476, P=0.023) was observed. Similarly, there was a significant correlation between maximal Young's modulus and change in fascicle length (r=0.470, P=0.049). As expected, patella tendon stiffness and Young's modulus were significantly higher in males compared with females (P<0.05). Interestingly, change in VL fascicle length during the eccentric contractions was significantly greater in males compared with females (P<0.05). Based on patella tendon moment arm measurements, VL muscle-tendon unit elongation was estimated to be significantly greater in males compared with females (5.24 and 4.84 cm respectively).

CONCLUSION

The significant difference in fascicle lengthening during eccentric contractions may be partly explained by the significantly higher patella tendon moment arm, patella tendon stiffness and Young's modulus found in males compared with females. The current study provides in vivo evidence to support the hypothesis that the tendon acts as a 'mechanical buffer' during eccentric contractions.

The manipulation of strain, when stress is controlled, modulates in vivo tendon mechanical properties but not systemic TGF-β1 levels

Modulators of loading-induced in vivo adaptations in muscle–tendon complex (MTC) mechanical properties remain unclear. Similarly contentious, is whether changes in MTC characteristics are associated with growth factor levels. Four groups were subjected to varying magnitudes of stress/strain: Group 1 trained with the MTC at a shortened position (MTCS; n = 10); Group 2 at a lengthened position (MTCL; n = 11; stress levels matched to MTCS); Group 3 over a wide range of motion (MTCX; n = 11); and Group 4 (n = 10) was the control population (no training). Patella tendon Stiffness (P < 0.001), Young's modulus, and quadriceps torque (P < 0.05) increments (only seen in the training groups), showed MTCL and MTCX groups responses to be superior to those of MTCS (P < 0.05). In addition, MTCL and MTCX better maintained adaptations compared to MTCS (P < 0.05) following detraining, with a pattern of slower loss of improvements at the early phase of detraining in all training groups. There were no significant changes (P > 0.05) in antagonist cocontraction, patella tendon dimensions or circulating transforming growth factor beta (TGF-β1) levels following training or detraining in any of the groups. We conclude that chronically loading the MTC in a relatively lengthened position (which involves greater strains) enhances its mechanical properties, more so than loading in a shortened position. This is true even after normalizing for internal stress. The underlying endocrine mechanisms do not appear to be mediated via TGF-β1, at least not at the systemic level. Our findings have implications with regard to the effectiveness of eccentric loading on improved tendon structural and mechanical properties.

Atypical subtrochanteric femoral shaft fractures: role for mechanics and bone quality

Bisphosphonates are highly effective agents for reducing osteoporotic fractures in women and men, decreasing fracture incidence at the hip and spine up to 50%. In a small subset of patients, however, these agents have recently been associated with 'atypical femoral fractures' (AFFs) in the subtrochanteric region or the diaphysis. These fractures have several atypical characteristics, including occurrence with minimal trauma; younger age than typical osteoporotic fractures; occurrence at cortical, rather than cancellous sites; early radiographic appearance similar to that of a stress fracture; transverse fracture pattern rather than the familiar spiral or transverse-oblique morphologies; initiation on the lateral cortex; and high risk of fracture on the contralateral side, at the same location as the initial fracture. Fracture is a mechanical phenomenon that occurs when the loads applied to a structure such as a long bone exceed its load-bearing capacity, either due to a single catastrophic overload (traumatic failure) or as a result of accumulated damage and crack propagation at sub-failure loads (fatigue failure). The association of AFFs with no or minimal trauma suggests a fatigue-based mechanism that depends on cortical cross-sectional geometry and tissue material properties. In the case of AFFs, bisphosphonate treatment may alter cortical tissue properties, as these agents are known to alter bone remodeling. This review discusses the use of bisphosphonates, their effects on bone remodeling, mechanics and tissue composition, their significance as an effective therapy for osteoporosis, and why these agents may increase fracture risk in a small population of patients.

Comprehensive surface-based morphometry reveals the association of fracture risk and bone geometry

Surface-based morphometry method is advantageous in its objectivity and increased capability in detecting focal morphological changes, but has not been applied in bone-related research. Orthopedics research in human has confirmed the association of the bone geometry in proximal femur and its fracture. In this study, surface-based morphometry is used to test the hypothesis that there is relationship between bone geometry and fracture risk of the proximal sesamoid bone (PSB) in forelimbs of Thoroughbred racehorses. The PSB surfaces were extracted from CT images of nonfractured forelegs (i.e., right foreleg in this study) of 6 racehorses with fractures in the contralateral (i.e., left) foreleg, and the right forelegs of 6 matched controls. Significant differences were detected at the abaxial margin of the medial PSB base which was found to be up to 3.5 mm more prominent in the fracture-group compared to the control-group. This study demonstrated a successful application of computational morphometry in bone. The detected anatomical differences may lead to a larger moment arm generated via the medial branch of the suspensory apparatus, increasing pressure on the sesamoid surface, and thus potentially predisposing to fracture. Findings from this pilot study not only increase the likelihood of accurate PSB fracture risk assessment, but also shed light on investigating the influence of sports and exercise on human athletes.

Prediction of incident hip fracture by femoral neck bone mineral density and neck-shaft angle: a 5-year longitudinal study in post-menopausal females

OBJECTIVE

To compare hip fracture incidence in post-menopausal females who were differently stratified for the fracture risk according to bone mineral density and proximal femur geometry.

METHODS

In a 5 year follow-up study, the hip fracture incidence in 729 post-menopausal females (45 of whom suffered from incident hip fracture) was assessed and compared. Forward logistic regression was used to select independent predictors of hip fracture risk, including age, age at menopause, height, weight, femoral neck bone mineral density (FNBMD), neck-shaft angle (NSA), hip axis length, femoral neck diameter and femoral shaft diameter as covariates. Fracture incidence was then calculated for the categories of young/old age, high/low FNBMD and wide/narrow NSA, which were obtained by dichotomising each hip fracture independent predictor at the value best separating females with and without a hip fracture.

RESULTS

The hip fracture incidence of the whole cohort was significantly higher in females with a wide NSA (8.52%) than in those with a narrow NSA (3.51%). The combination of wide NSA and low FNBMD had the highest hip fracture incidence in the whole cohort (17.61%) and each age category. The combinations of narrow/wide NSA with low/high FNBMD, respectively, gave a significantly higher fracture incidence in older than in younger women, whereas women with a combined wide NSA and low FNBMD had no significantly different fracture incidence in young (14.60%) or old age (21.62%).

CONCLUSION

Our study showed that NSA is effective at predicting the hip fracture risk and that the detection in early post-menopause of a wide NSA together with a low FNBMD should identify females at high probability of incident hip fracture.

Genome-wide pleiotropy of osteoporosis-related phenotypes: the Framingham Study

Genome-wide association studies offer an unbiased approach to identify new candidate genes for osteoporosis. We examined the Affymetrix 500K + 50K SNP GeneChip marker sets for associations with multiple osteoporosis-related traits at various skeletal sites, including bone mineral density (BMD, hip and spine), heel ultrasound, and hip geometric indices in the Framingham Osteoporosis Study. We evaluated 433,510 single-nucleotide polymorphisms (SNPs) in 2073 women (mean age 65 years), members of two-generational families. Variance components analysis was performed to estimate phenotypic, genetic, and environmental correlations (rho(P), rho(G), and rho(E)) among bone traits. Linear mixed-effects models were used to test associations between SNPs and multivariable-adjusted trait values. We evaluated the proportion of SNPs associated with pairs of the traits at a nominal significance threshold alpha = 0.01. We found substantial correlation between the proportion of associated SNPs and the rho(P) and rho(G) (r = 0.91 and 0.84, respectively) but much lower with rho(E) (r = 0.38). Thus, for example, hip and spine BMD had 6.8% associated SNPs in common, corresponding to rho(P) = 0.55 and rho(G) = 0.66 between them. Fewer SNPs were associated with both BMD and any of the hip geometric traits (eg, femoral neck and shaft width, section moduli, neck shaft angle, and neck length); rho(G) between BMD and geometric traits ranged from -0.24 to +0.40. In conclusion, we examined relationships between osteoporosis-related traits based on genome-wide associations. Most of the similarity between the quantitative bone phenotypes may be attributed to pleiotropic effects of genes. This knowledge may prove helpful in defining the best phenotypes to be used in genetic studies of osteoporosis.

Development and validation of a predictive bone fracture risk model for astronauts

There are still many unknowns in the physiological response of human beings to space, but compelling evidence indicates that accelerated bone loss will be a consequence of long-duration spaceflight. Lacking phenomenological data on fracture risk in space, we have developed a predictive tool based on biomechanical and bone loading models at any gravitational level of interest. The tool is a statistical model that forecasts fracture risk, bounds the associated uncertainties, and performs sensitivity analysis. In this paper, we focused on events that represent severe consequences for an exploration mission, specifically that of spinal fracture resulting from a routine task (lifting a heavy object up to 60 kg), or a spinal, femoral or wrist fracture due to an accidental fall or an intentional jump from 1 to 2 m. We validated the biomechanical and bone fracture models against terrestrial studies of ground reaction forces, skeletal loading, fracture risk, and fracture incidence. Finally, we predicted fracture risk associated with reference missions to the moon and Mars that represented crew activities on the surface. Fracture was much more likely on Mars due to compromised bone integrity. No statistically significant gender-dependent differences emerged. Wrist fracture was the most likely type of fracture, followed by spinal and hip fracture.

Moment arms of the knee extensor mechanism in children and adults

In the present study we investigated whether there are differences in the patellar tendon moment arm (PTMA)-knee angle relationship between pre-pubertal children and adults, and whether the PTMA length scales to relevant anthropometric measurements in the two groups. Anthropometric characteristics and the PTMA length-joint angle relationships were determined in 20 adults and 20 pre-pubertal children of both genders. The anthropometric characteristics measured were height, body mass, knee circumference, medio-lateral knee breadth, anterior-posterior knee depth, leg length, femur length and tibia length. The PTMA was quantified from magnetic resonance images using the geometric centre of the femoral condyle method, at every 5 degrees between 55 degrees and 90 degrees of knee flexion (0 degrees is full extension). Adults had a significantly greater PTMA length at all joint angles (4.2 +/- 0.4 vs. 3.6 +/- 0.3 cm at 90 degrees ; P < 0.01), with the PTMA length decreasing from knee extension to knee flexion similarly in both adults and children. There were no significant and strong correlations between the PTMA and anthropometric measures in adults for any joint angle. In contrast, the PTMA correlated and scaled with anthropometric characteristics for the children (P < 0.05, r = 0.49-0.9) at all joint angles. The PTMA length in children was most accurately predicted at 85 degrees of flexion from the equation PTMA = -0.25 + 0.083 x tibia length + 0.02 x leg length (R(2) = 0.83). These findings indicate that the knee extensor mechanism in pre-pubertal children should not be considered to be a 'scaled-down' version of that in adults.