Nanomaterials in mass spectrometry ionization and prospects for biological application

UV-Absorbing Ligand Capped Gold Nanoparticles for the SALDI-MS Analysis of Small Molecules

We report that modifying the surface of gold nanoparticles (Au NPs) with 2-mercaptopyridine-3-carboxylic acid (MPyCA) enhances surface-assisted laser desorption/ionization (SALDI) performance in the analysis of small molecules. The MPyCA ligand has a strong UV absorbance at the wavelengths of the typical MALDI laser at 337 nm, resulting in efficient thermal/energy transfer from the Au NPs to analytes during pulse-laser irradiation. In addition, the MPyCA ligand contains carboxylic acid and pyridine groups, providing affinity to various analytes through acid-base interactions. Irganox1010, glucose and meropenem were utilized as model analytes to evaluate SALDI performance because these molecules are generally ionized with difficulty by conventional MALDI-MS. Our results demonstrate that the MPyCA-Au NP based SALDI-MS could detect Irganox1010, glucose and meropenem with stronger ion peaks for these molecules compared to MALDI-MS using CHCA. The limit of detection (LOD) for meropenem was much lower in the case of SALDI (LOD=1 ng/mL) compared to MALDI (LOD=10 μg/mL).

A novel laser desorption/ionization method using through hole porous alumina membranes

RATIONALE

A novel matrix-free laser desorption/ionization method based on porous alumina membranes was developed. The porous alumina membranes have a two-dimensional (2D) ordered structure consisting of closely aligned straight through holes of sub-micron in diameter that are amenable to mass production by industrial fabrication processes.

METHODS

Considering a balance between the ion generating efficiency and the mechanical strength of the membranes, the typical values for the hole diameter, open aperture ratio and membrane thickness were set to 200 nm, 50% and 5 μm, respectively. The membranes were coated with platinum on a single side that was exposed to the laser. Evaluation experiments were conducted on the feasibility of this membrane structure for an ionization method using a single peptide and mixed peptides and polyethylene glycol samples and a commercial matrix-assisted laser desorption/ionization (MALDI) time-of-flight mass spectrometer in the positive ion mode.

RESULTS

Results showed a softness of ionization and no sweet spot nature. The capillary action of the through holes with very high aspect ratio enables several loading protocols including sample impregnation from the surface opposite to the laser exposure side.

CONCLUSIONS

The feasibility study indicates that the through hole porous alumina membranes have several advantages in terms of usefulness over the conventional surface-assisted laser desorption ionization (SALDI) methods. The proposed novel ionization method is termed Desorption Ionization Using Through Hole Alumina Membrane (DIUTHAME).

Photothermal lysis of pathogenic bacteria by platinum nanodots decorated gold nanorods under near infrared irradiation

Photothermal lysis is an effective method for fast removal of pathogenic bacteria from bacterial contaminated environments and human body, irrespective of bacterial drug resistance. In the present work, a highly effective photothermal agent, Au@Pt nanorods (NRs), was prepared by modification of Pt nanodots with particle size of 5nm on the surface of Au NRs with a length of ca. 41nm and a width of ca. 13nm. The LSPR absorbance band of Au@Pt NRs could be tuned from 755 to 845nm by changing the Pt loading from 0.05 to 0.2, as compared to Au NRs. The photothermal conversion efficiency of Au@Pt NRs depended on the Pt loading, Au@Pt NRs concentration, and power density. Under NIR irradiation, the Au@Pt_0.1 NRs exhibited the highest efficiency in photothermal lysis of both gram-positive and gram-negative bacteria. The introduction of Pt nanodots on the surface of Au@Pt NRs not only enhanced their photothermal conversions but also enhanced their affinity to bacteria and significantly decreased their cytotoxicity. The photothermal lysis of bacteria over Au@Pt NRs caused the damage onto the cell walls of bacteria, implying that the killing of bacteria probably went through the thermal ablation mechanism.

Mechanisms of Nanophase-Induced Desorption in LDI-MS. A Short Review

Nanomaterials are frequently used in laser desorption ionization mass spectrometry (LDI-MS) as DI enhancers, providing excellent figures of merit for the analysis of low molecular weight organic molecules. In recent years, literature on this topic has benefited from several studies assessing the fundamental aspects of the ion desorption efficiency and the internal energy transfer, in the case of model analytes. Several different parameters have been investigated, including the intrinsic chemical and physical properties of the nanophase (chemical composition, thermal conductivity, photo-absorption efficiency, specific heat capacity, phase transition point, explosion threshold, etc.), along with morphological parameters such as the nanophase size, shape, and interparticle distance. Other aspects, such as the composition, roughness and defects of the substrate supporting the LDI-active nanophases, the nanophase binding affinity towards the target analyte, the role of water molecules, have been taken into account as well. Readers interested in nanoparticle based LDI-MS sub-techniques (SALDI-, SELDI-, NALDI- MS) will find here a concise overview of the recent findings in the specialized field of fundamental and mechanistic studies, shading light on the desorption ionization phenomena responsible of the outperforming MS data offered by these techniques.

Facile synthesis of gold@graphitized mesoporous silica nanocomposite and its surface-assisted laser desorption/ionization for time-of-flight mass spectroscopy

In this work, a novel core-shell structured gold@graphitized mesoporous silica nanocomposite (Au@GMSN) was synthesized by in situ graphitization of template within the mesochannels of mesoporous silica shell on gold core and demonstrated to be promising nanomaterials for surface-assisted laser desorption/ionization time-of-flight mass spectroscopy (SALDI-TOF MS). The integration of the graphitized mesoporous silica with the gold nanoparticles endowed Au@GMSN with large surface areas of graphitic structure, good dispersibility, and strong ultraviolet (UV) absorption. Au@GMSN exerted the synergistic effect on the efficient detection of small-molecular-weight analytes including amino acids, neutral saccharides, peptides, and traditional Chinese medicine. The Au@GMSN-assisted laser desorption/ionization exhibited the following superiorities: high ionization efficiency, low fragmentation interference, favorable salt tolerance, and good reproducibility. Moreover, because of the large hydrophobic inner surface area of the graphitized mesoporous silica shell, the Au@GMSN demonstrated its promising capacity in the pre-enrichment of aromatic analytes prior to SALDI-TOF MS, which favored rapid and sensitive detection.

Techniques for physicochemical characterization of nanomaterials

Advances in nanotechnology have opened up a new era of diagnosis, prevention and treatment of diseases and traumatic injuries. Nanomaterials, including those with potential for clinical applications, possess novel physicochemical properties that have an impact on their physiological interactions, from the molecular level to the systemic level. There is a lack of standardized methodologies or regulatory protocols for detection or characterization of nanomaterials. This review summarizes the techniques that are commonly used to study the size, shape, surface properties, composition, purity and stability of nanomaterials, along with their advantages and disadvantages. At present there are no FDA guidelines that have been developed specifically for nanomaterial based formulations for diagnostic or therapeutic use. There is an urgent need for standardized protocols and procedures for the characterization of nanoparticles, especially those that are intended for use as theranostics.

Use of nanomaterials in capillary and microchip electrophoresis

This review gives an overview of different separation strategies with nanomaterials and their use in capillary electrophoresis (CE) and capillary electrochromatography, as well as in microchip electrophoresis, including metal and metal oxide nanoparticles, carbon nanotubes, fullerene and polymer nanoparticles, as well as silica nanoparticles. The paper highlights the new developments and innovative applications of nanoparticles as pseudostationary phases or immobilized on the capillary surface for CE separation. The separation and characterization of target nanoparticles with different sizes by CE are reviewed likewise.

Pulsed-laser desorption/ionization of clusters from biofunctional gold nanoparticles: implications for protein detections

In this paper, we describe a pulsed-laser desorption/ionization mass spectrometry (LDI-MS) approach for the detection of proteins with femtomolar sensitivity through the analysis of gold (Au) clusters desorbed from aptamer-modified gold nanoparticles (Apt-AuNPs) on a nitrocellulose membrane (NCM). After the target protein (thrombin) was selectively captured by the surface-bound 29-mer thrombin-binding aptamer (TBA(29)), the thrombin/TBA(29)-AuNP complexes were concentrated and deposited onto the NCM to form a highly efficient background-free surface-assisted LDI substrate. Under pulsed laser irradiation (355 nm), the binding of thrombin decreased the desorption and/or ionization efficiencies of the Au atoms from the AuNP surfaces. The resulting decreases in the intensities of the signals for Au clusters in the mass spectra provided a highly amplified target-labeling indicator for the targeted protein. Under optimized conditions, this probe was highly sensitive (limit of detection: ca. 50 fM) and selective (by at least 1000-fold over other proteins) toward thrombin; it also improved reproducibility (<5%) of ion production by presenting a more-homogeneous substrate surface, thereby enabling LDI-based measurements for the accurate and precise quantification of thrombin in human serum. This novel LDI-MS approach allows high-speed analyses of low-abundance thrombin with ultrahigh sensitivity; decorating the AuNP surfaces with other aptamers also allowed amplification of other biological signals.

Development of nanomaterials for SALDI-MS analysis in forensics

Within the last decade, the escalation of research output in the field of nanotechnology has spurred the development of new nanomaterials for use as assisting agents in surface assisted laser desorption ionization mass spectrometry (SALDI-MS). Specifically modified nanomaterials, coupled with mass spectrometry, have improved the detection sensitivity, specificity, flexibility and reproducibility of SALDI-MS analysis. The technological advancement of LDI-MS has in turn, propelled the use of the analytical technique in the field of forensics. In this report, the various roles and applications of metal-, silicon- and carbon-based nanostructured materials as SALDI matrices in the analysis of forensic samples are described. The advantages of SALDI-MS as an analytical tool for forensic sample analysis are also discussed.

Semiconductor cadmium sulphide nanoparticles as matrices for peptides and as co-matrices for the analysis of large proteins in matrix-assisted laser desorption/ionization reflectron and linear time-of-flight mass spectrometry

The use of semiconductor cadmium sulphide nanoparticles (CdS NPs) capped with 4-aminothiophenol (ATP) and 11-mercaptoundecanoic acid (MUA) is described for the first time as matrices and as co-matrices for the analysis of peptides and proteins in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS). UV-visible spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were applied for the characterization of functionalized CdS NPs. The synthesized CdS-ATP and CdS-MUA NPs exhibit uniform size distribution with diameter of 15-25 nm and 20-30 nm, respectively. The -NH(2) (ATP) and -COOH (MUA) groups modified on the surfaces of CdS NPs provide ionizable moieties for efficient transfer of protons during the desorption/ionization of analytes. The functionalized CdS NPs have desirable properties for the analysis of peptides in reflectron MALDI-TOF-MS with suppressed background noise and increased mass resolution (4-13-fold) in linear MALDI-TOF-MS. The application of CdS-MUA NPs and SA as the co-matrices in MALDI-MS is demonstrated for the analysis of hydrophobic proteins from soybean.

Nanomaterial-assisted laser desorption ionization for mass spectrometry-based biomedical analysis

Nanomaterials have been widely used to assist laser desorption ionization of biomolecules for mass spectrometry analysis. Compared with classical matrix-assisted laser desorption ionization, strategies based on nanomaterial-assisted ionization generate a clean background, which is of great benefit for the qualitative and quantitative analysis of small biomolecules, such as therapeutic and diagnostic molecules. As label-free platforms, they have successfully been used for high-throughput enzyme activity/inhibition monitoring and also for tissue imaging to map in situ the distribution of peptides, metabolites and drugs. In addition to widely used porous silicon nanomaterials, gold nanoparticles can be easily chemically modified by thiol-containing compounds, opening novel interesting perspectives. Such functionalized nanoparticles have been used both as probes to extract target molecules and as matrices to assist laser desorption ionization for developing new enzyme immunoassays or for studying DNA hybridization. More recently, semiconductor nanomaterials or quantum dots acting as photosensitive centers to induce in-source redox reactions for proteomics and to investigate biomolecule oxidation for metabolomics have been shown to offer new analytical strategies.

On-plate desalting and SALDI-MS analysis of peptides with hydrophobic silicate nanofilms on a gold substrate

We report the use of silicate nanofilms for on-plate desalting and subsequently direct laser desorption/ionization-mass spectrometric (LDI-MS) analysis of peptides. A hydrophobic octadecyltrichlorosilane (OTS) monolayer is formed on a calcinated nanofilm on a gold substrate to facilitate sample deposition and interaction with the surface that allows effective removal of MS-incompatible contaminants such as salts and surfactants by simple on-plate washing while the peptides are retained on the spot. By elimination of interferences from matrix-related ions and contaminants, sensitivity of MS analysis has been enhanced over ca. 20 times, leading to improved detection of peptides at the low-femtomolar level. A high recovery rate of the peptides is obtained by using relatively rough nanofilms, which are prepared through a modified layer-by-layer deposition/calcination process. The performance of the films has been investigated with peptide samples in the presence of high salts (NaCl and sodium acetate) and urea. Compared to matrix-assisted laser desorption/ionization analysis with CHCA matrix, LDI with on-plate desalting offers marked improvement for analysis of peptides due to low background ions and reduction of sample complexity. Additionally, selective capture of the hydrophobic components of a protein can be achieved, providing a highly useful strategy for specific peptide enrichment. LDI with on-plate desalting approach has also been successfully applied to peptide analysis from protein digests.

Ultrathin calcinated films on a gold surface for highly effective laser desorption/ionization of biomolecules

We report a nanoscale calcinated silicate film fabricated on a gold substrate for highly effective, matrix-free laser desorption ionization mass spectrometry (LDI-MS) analysis of biomolecules. The calcinated film is prepared by a layer-by-layer (LbL) deposition/calcination process wherein the thickness of the silicate layer and its surface properties are precisely controlled. The film exhibits outstanding efficiency in LDI-MS with extremely low background noise in the low-mass region, allowing for effective analysis of low mass samples and detection of large biomolecules including amino acids, peptides, and proteins. Additional advantages for the calcinated film include ease of preparation and modification, high reproducibility, low cost, and excellent reusability. Experimental parameters that influence LDI on calcinated films have been systemically investigated. Presence of citric acid in the sample significantly enhances LDI performance by facilitating protonation of the analyte and reducing fragmentation. The wetting property and surface roughness appear to be important factors that manipulate LDI performance of the analytes. This new substrate presents a marked advance in the development of matrix-free mass spectrometric methods and is uniquely suited for analysis of biomolecules over a broad mass range with high sensitivity. It may open new avenues for developing novel technology platforms upon integration with existing methods in microfluidics and optics.

Effects of ZnO nanowire length on surface-assisted laser desorption/ionization of small molecules

The effects of nanowire (NW) length on surface-assisted laser desorption/ionization (SALDI) mass spectrometry (MS) of small molecules were investigated using ZnO NWs of 50 nm diameter with a broad range of lengths ranging from 25 to 1600 nm. Characterization of the ZnO NWs revealed that the length was the only parameter that varied in this study, while other properties of the NWs remained essentially the same as the bulk properties. Experiments on SALDI efficiency exhibited that the SALDI processes on NWs have a certain length window. In the present case of ZnO NWs, the SALDI efficiency was found to be enhanced on the nanowires of 250 nm length, corresponding to an aspect ratio of 5. The roles of NW length in the SALDI processes were discussed from the viewpoint of efficient energy-transfer media as well as physical obstacles screening laser irradiation and preventing the escape of nascent ions from NW surfaces. The existence of the length window may provide valuable insight for tailoring new nanostructures for efficient SALDI of small molecules.

Comparison of inert supports in laser desorption/ionization mass spectrometry of peptides: pencil lead, porous silica gel, DIOS-chip and NALDI target

In the search for alternative inert surfaces replacing silicon chips in Desorption/Ionization On porous Silicon (DIOS)-like mass spectrometry analyses, nanostructured silicon-based NALDI chips were evaluated in Laser Desorption/Ionization (LDI) of peptides. Comparisons were made using commercially available DIOS chips (MassPREP-DIOS-target), amorphous carbon powder from lead pencil and porous silica gel used for chromatographic purposes as reference supports. A set of synthetic model peptides presenting variable amino acid sequences of various lengths was analyzed under all conditions. The LDI responses of the four 'matrix-free' techniques were compared, especially in terms of peptide detection sensitivity and overall experiment robustness.

Sensitivity of redox reactions of dyes to variations of conditions created in mass spectrometric experiments

Redox behaviour of four imidazophenazine dye derivatives under mass spectrometric conditions of matrix-assisted laser desorption/ionization (MALDI), laser desorption/ionization (LDI) from metal and graphite surface, electrospray, low temperature secondary ion mass spectrometry (LT SIMS) and fast atom bombardment (FAB) was studied and distinctions in the reduction-dependent spectral patterns were analyzed from the point of view of different quantities of protons and electrons available for reduction in different techniques. The reduction products [M + 2H](+*), [M + 3H](+) and M(-*), [M + H](-) were observed in the positive and negative ion modes, respectively, which permitted to suggest independent occurrence of reduction and protonation/deprotonation processes. LDI from graphite substrate was the only technique that allowed us to obtain abundant negative ions of all dye derivatives. The yield of field ionization (FI) or field desorption (FD) mechanism to ion formation under LDI from rough graphite surface has been addressed. The sensitivity of reduction of the dyes to variation of reduction-initiating agents confirms high redox activity of the dyes essential for their functioning in natural and artificial systems.

Surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) of low molecular weight organic compounds and synthetic polymers using zinc oxide (ZnO) nanoparticles

We have developed surface-assisted laser desorption/ionization mass spectrometry using zinc oxide (ZnO) nanoparticles with anisotropic shapes (ZnO-SALDI-MS). The mass spectra showed low background noises in the low m/z, i.e. less than 500 u region. Thus, we succeeded in SALDI ionization on low molecular weight organic compounds, such as verapamil hydrochloride, testosterone, and polypropylene glycol (PPG) (average molecular weight 400) without using a liquid matrix or buffers such as citric acids. In addition, we found that ZnO-SALDI has advantages in post-source decay (PSD) analysis and produced a simple mass spectrum for phospholipids. The ZnO-SALDI spectra for synthetic polymers of polyethylene glycol (PEG), polystyrene (PS) and polymethylmethacrylate (PMMA) showed the sensitivity and molecular weight distribution to be comparable to matrix-assisted laser desorption/ionization (MALDI) spectra with a 2,5-dihydroxybenzoic acid (DHB) matrix. ZnO-SALDI shows good performance for synthetic polymers as well as low molecular weight organic compounds.

Surface-assisted laser desorption/ionization mass spectrometry on titania nanotube arrays

Titania nanotube arrays (NTA) generated from anodizing processes are tested as the substrate for surface-assisted laser desorption/ionization mass spectrometry (SALDI MS). The background generated from titania NTA is very low, making the approach suitable for the analysis of small molecules. The upper detectable mass is approximately 29 kDa. Homogeneous sample deposition leads to good shot-to-shot reproducibility and suitability for quantitative analysis. Additionally, phosphopeptides can be selectively trapped on the titania NTA substrate, as illustrated by simply depositing a tryptic digest of beta-casein followed by titania NTA SALDI MS analysis. The detection limit for small organics and peptides is in low fmol.

Mesoporous tungsten titanate as matrix for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis of biomolecules

In this paper, mesoporous tungsten titanate (WTiO) with different nano-pore structures was utilized as matrix for the analysis of short peptides by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). Effect of characteristic features of mesoporous matrices on laser desorption/ionization process was investigated. Experiments showed that the ordered two-dimensional and three-dimensional mesoporous matrices were superior in performance to the non-ordered WTiO matrix. The dramatic enhancement of signal sensitivity by the ordered mesoporous matrices can be reasonably attributed to the ordered structure, which facilitated the understanding on structure-function relationship in mesoporous cavity for laser desorption process of adsorbed biomolecules. With the ordered mesoporous matrix, the short peptides are successfully detected. The presence of trace alkali metal salt effectively increased the analyte ion yields and the MALDI-TOFMS using the inorganic mesoporous matrices displayed a high salt tolerance. The developed technique also showed a satisfactory performance in peptide-mapping and amino-acid sequencing analysis.

Recent developments in methods and technology for analysis of biological samples by MALDI-TOF-MS

Matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry (MALDI-TOF-MS) is widely used in a variety of fields because it has the characteristics of speed, ease of use, high sensitivity, and wide detectable mass range for obtaining molecular weights and for structural characterization of macromolecules. In this article we summarize recent developments in matrix additives, new matrices, and sample-pretreatment methods using off-probe or on-probe techniques or nanomaterials for MALDI-TOF-MS analysis of biological samples.