Development of hemoglobin A1c certified reference material by liquid chromatography isotope dilution mass spectrometry

Development of cancer biomarker heat shock protein 90α certified reference material using two different isotope dilution mass spectrometry techniques

Heat shock protein 90α (HSP90α) has been regarded as an important indicator for judging tumor metastasis and prognosis due to its significant upregulation in various tumors. Therefore, the accurate quantification of HSP90α is of great significance for clinical diagnosis and therapy of cancers. However, the lack of HSP90α certified reference material (CRM) leads to the accuracy and consistency of quantification methods not being effectively evaluated. Besides, quantitative results without traceability make comparisons between different studies difficult. In this study, an HSP90α solution CRM was developed from the recombinant protein raw material. The recombinant protein is a dimer, and the purity of the CRM candidate reached 96.71%. Both amino acid analysis-isotope dilution mass spectrometry (AAA-IDMS) and unique peptide analysis-isotope dilution mass spectrometry (UPA-IDMS) were performed to measure the content of HSP90α in the solution CRM candidate, and the certified value was assessed to be 66.2 ± 8.8 µg/g. Good homogeneity of the CRM was identified, and the stability examination suggested that the CRM was stable for at least 4 months at - 80 °C and for 7 days at 4 °C. With traceability to SI unit (kg), this CRM has potential to help establish a metrological traceability chain for quantification of HSP90α, which will make the quantification results standardized and comparable regardless of the quantitative methods.

Review: Advances in the Accuracy and Traceability of Metalloprotein Measurements Using Isotope Dilution Inductively Coupled Plasma Mass Spectrometry

Advances in inductively coupled plasma mass spectrometry and the methods used to prepare isotopically enriched standards, allow for the high accuracy measurement of metalloproteins by isotope dilution mass spectrometry. This technique has now reached a level of maturity whereby a step change in the accuracy, precision, and traceability of, in particular, clinical, and biomedical measurements is achievable. Current clinical measurements, which require low limits of detection in the presence of complex sample matrices, use indirect methods based on immunochemistry for the study of human disease. However, this approach suffers from poor traceability, requiring comparisons based on provision of matrix-based reference materials, used as analytical standards. This leads to difficulty when changes in the reference material are required, often resulting in a lack of interlaboratory and temporal comparability in clinical results and reference ranges. In this review, we focus on the most important metalloproteins for clinical studies, to illustrate how the attributes of chromatography coupled to inorganic mass spectrometry can be used for the direct measurement of metalloproteins such as hemoglobin, transferrin, and ceruloplasmin. By using this approach, we hope to demonstrate how isotope dilution analysis can be used as a reference method to improve traceability and underpin clinical, biomedical, and other biological measurements.

Development of human serum matrix-based unconjugated estriol-certified reference material by recommended ID-LC-MS/MS reference method

To solve long-term lack of traceability of commercial calibrator kits and standardize clinical routine assays, we developed a human serum matrix-based unconjugated estriol (uE3) reference material (RM) with five concentration gradients. The RMs of uE3 were certified by the National Institute of Metrology (NIM) with the codes of GBW (E) 091048, GBW (E) 091049, GBW (E) 091050, GBW (E) 091051, and GBW (E) 091052. The RMs were determined by isotope dilution liquid chromatography-tandem mass spectrometry (ID-LC-MS/MS) reference method which was developed in our group and recommended by the Joint Committee on Traceability on Laboratory Medicine (JCTLM). GBW09224 is intended for use as a primary reference material to enable the SI-traceable measurement of uE3. This study describes the development process of these certified RMs. The candidate material was prepared by collecting from the remaining serum samples after routine clinical testing. Satisfactory homogeneity and stability were shown in these RMs. They are also commutable between the reference method and the three routine clinical immunoassay systems. To improve the accuracy of value assignment, a collaborative study in nine reference laboratories was conducted which was performed according to ISO/WD 15725-1 and all of the reference laboratories have been confirmed by China National Accreditation Service for Conformity Assessment (CNAS). The raw results were statistically analyzed and processed, coupled with uncertainty evaluation, to obtain the certified value: GBW (E) 091048 is 22.1 ± 1.3 nmol/L, GBW (E) 091049 is 33.6 ± 1.6 nmol/L, GBW (E) 091050 is 10.4 ± 0.8 nmol/L, GBW (E) 091051 is 15.5 ± 1.0 nmol/L, GBW (E) 091052 is 47.0 ± 2.0 nmol/L. The preparation process of human serum matrix-based reference material and the lack of these type of secondary (commutable) reference material of unconjugated estriol lead to the interruption of its traceability chain, which is a problem to be solved in its standardization as mentioned in the metrological traceability in ISO 17511, 2020.

Determination of purity values of amino acid reference materials by mass balance method: an approach to the quantification of related structure impurities

A systematic procedure for the determination of purity values of amino acid reference materials was developed by use of mass balance method where four categories of impurities (related structure impurities (RSIs), water, organic solvent residue (OSR), and non-volatile residue (NVR)) were quantified separately. The amount of RSIs was determined using a combination of three quantification methods. To ensure metrological traceability in the determination of RSIs, at least one such impurity in each candidate amino acid reference material was quantified using liquid chromatography-isotope dilution tandem mass spectrometry (LC-IDMS/MS). Other RSIs were determined using external calibration liquid chromatography-tandem mass spectrometry (LC-MS/MS) or o-phthaldialdehyde (OPA) derivatization, followed by liquid chromatography-ultraviolet (LC-UV) measurement. As the UV absorption of most RSIs came basically from the same chromophore after OPA derivatization, a relative peak area approach was used in the LC-UV method to quantify the amount of RSIs by comparing their peak areas with that of a reference RSI. The reference RSI was pre-selected and the amount determined by LC-IDMS/MS separately. The absence of D-amino acids was confirmed using Marfey's reagent derivatization, followed by LC-UV analysis. The amounts of water, OSR, and NVR were measured using Karl Fischer coulometry, gas chromatography-mass spectrometry (GC-MS) and thermogravimetry, respectively. By using this procedure, four amino acid (L-valine, L-leucine, L-isoleucine, and L-phenylalanine) certified reference materials (CRMs) were developed from the candidate materials. The homogeneity and stability of the CRMs were demonstrated by use of LC-IDMS/MS or OPA-LC-UV method, following the principles in ISO 17034 and ISO Guide 35.Graphical abstract.

Commutable whole blood reference materials for hemoglobin A1c validated on multiple clinical analyzers

Background

The measurement of hemoglobin A1c (HbA1c) is important for diagnosing diabetes mellitus as well as assessing glycemic control in diabetic patients. Commutable whole blood certified reference materials (CRMs) are needed in the measurement of HbA1c for method validation and/or as quality controls.

Methods

We developed three levels of hemolyzed whole blood CRMs for HbA1c. The certified values were determined using liquid chromatography-isotope dilution tandem mass spectrometry method (LC-IDMS/MS) where two “signature” hexapeptides of HbA1c and hemoglobin A0 (HbA0) were used as the calibration standards. The concentrations of the hexapeptide solutions were determined by amino acid analysis by the LC-IDMS/MS method using amino acid CRMs as the calibration standards. The commutability study was conducted by measuring 25 patient specimens and the whole blood CRMs by both LC-IDMS/MS method and various routine methods using six different clinical analyzers.

Results

The certified values were determined to be 35.1±2.0, 50.3±1.9 and 65.8±2.6 mmol/mol, respectively. These CRMs showed good commutability on five of the six clinical analyzers but showed poor commutability on one of the clinical analyzers that used similar method as two other analyzers where good commutability was observed.

Conclusions

With certified target values based on metrological traceability and good commutability on most of the clinical analyzers, the developed whole blood CRMs can be used for method validation or as quality control materials in the measurement of HbA1c. The commutability study results also underscored the need of commutability testing of clinical CRMs using various clinical analyzers.