Qualitative aspects and validation of a screening method for pesticides in vegetables and fruits based on liquid chromatography coupled to full scan high resolution (Orbitrap) mass spectrometry

Development and application of an in-house library and workflow for gas chromatography-electron ionization-accurate-mass/high-resolution mass spectrometry screening of environmental samples

This work presents an optimized gas chromatography–electron ionization–high-resolution mass spectrometry (GC-EI-HRMS) screening method. Different method parameters affecting data processing with the Agilent Unknowns Analysis SureMass deconvolution software were optimized in order to achieve the best compromise between false positives and false negatives. To this end, an accurate-mass library of 26 model compounds was created. Then, five replicates of mussel extracts were spiked with a mixture of these 26 compounds at two concentration levels (10 and 100 ng/g dry weight in mussel, 50 and 500 ng/mL in extract) and injected in the GC-EI-HRMS system. The results of these experiments showed that accurate mass tolerance and pure weight factor (combination of reverse-forward library search) are the most critical factors. The validation of the developed method afforded screening detection limits in the 2.5–5 ng range for passive sampler extracts and 1–2 ng/g for mussel sample extracts, and limits of quantification in the 0.6–3.2 ng and 0.1–1.8 ng/g range, for the same type of samples, respectively, for 17 model analytes. Once the method was optimized, an accurate-mass HRMS library, containing retention indexes, with ca. 355 spectra of derivatized and non-derivatized compounds was generated. This library (freely available at https://doi.org/10.5281/zenodo.5647960), together with a modified Agilent Pesticides Library of over 800 compounds, was applied to the screening of passive samplers, both of polydimethylsiloxane and polar chemical integrative samplers (POCIS), and mussel samples collected in Galicia (NW Spain), where a total of 75 chemicals could be identified.

A Generic LC-HRMS Screening Method for Marine and Freshwater Phycotoxins in Fish, Shellfish, Water, and Supplements

Phycotoxins occur in various marine and freshwater environments, and can accumulate in edible species such as fish, crabs, and shellfish. Human exposure to these toxins can take place, for instance, through consumption of contaminated species or supplements and through the ingestion of contaminated water. Symptoms of phycotoxin intoxication include paralysis, diarrhea, and amnesia. When the cause of an intoxication cannot directly be found, a screening method is required to identify the causative toxin. In this work, such a screening method was developed and validated for marine and freshwater phycotoxins in different matrices: fish, shellfish, water, and food supplements. Two LC methods were developed: one for hydrophilic and one for lipophilic phycotoxins. Sample extracts were measured in full scan mode with an Orbitrap high resolution mass spectrometer. Additionally, a database was created to process the data. The method was successfully validated for most matrices, and in addition, regulated lipophilic phycotoxins, domoic acid, and some paralytic shellfish poisoning toxins could be quantified in shellfish. The method showed limitations for hydrophilic phycotoxins in sea water and for lipophilic phycotoxins in food supplements. The developed method is a screening method; in order to confirm suspected compounds, comparison with a standard or an additional analysis such as NMR is required.

Multilaboratory Collaborative Study of a Nontarget Data Acquisition for Target Analysis (nDATA) Workflow Using Liquid Chromatography-High-Resolution Accurate Mass Spectrometry for Pesticide Screening in Fruits and Vegetables

Nontarget data acquisition for target analysis (nDATA) workflows using liquid chromatography-high-resolution accurate mass (LC-HRAM) spectrometry, spectral screening software, and a compound database have generated interest because of their potential for screening of pesticides in foods. However, these procedures and particularly the instrument processing software need to be thoroughly evaluated before implementation in routine analysis. In this work, 25 laboratories participated in a collaborative study to evaluate an nDATA workflow on high moisture produce (apple, banana, broccoli, carrot, grape, lettuce, orange, potato, strawberry, and tomato). Samples were extracted in each laboratory by quick, easy, cheap, effective, rugged, and safe (QuEChERS), and data were acquired by ultrahigh-performance liquid chromatography (UHPLC) coupled to a high-resolution quadrupole Orbitrap (QOrbitrap) or quadrupole time-of-flight (QTOF) mass spectrometer operating in full-scan mass spectrometry (MS) data-independent tandem mass spectrometry (LC-FS MS/DIA MS/MS) acquisition mode. The nDATA workflow was evaluated using a restricted compound database with 51 pesticides and vendor processing software. Pesticide identifications were determined by retention time (t_R, ±0.5 min relative to the reference retention times used in the compound database) and mass errors (δ_M) of the precursor (RTP, δ_M ≤ ±5 ppm) and product ions (RTPI, δ_M ≤ ±10 ppm). The elution profiles of all 51 pesticides were within ±0.5 min among 24 of the participating laboratories. Successful screening was determined by false positive and false negative rates of <5% in unfortified (pesticide-free) and fortified (10 and 100 μg/kg) produce matrices. Pesticide responses were dependent on the pesticide, matrix, and instrument. The false negative rates were 0.7 and 0.1% at 10 and 100 μg/kg, respectively, and the false positive rate was 1.1% from results of the participating LC-HRAM platforms. Further evaluation was achieved by providing produce samples spiked with pesticides at concentrations blinded to the laboratories. Twenty-two of the 25 laboratories were successful in identifying all fortified pesticides (0-7 pesticides ranging from 5 to 50 μg/kg) for each produce sample (99.7% detection rate). These studies provide convincing evidence that the nDATA comprehensive approach broadens the screening capabilities of pesticide analyses and provide a platform with the potential to be easily extended to a larger number of other chemical residues and contaminants in foods.

Alternative method’s results for the non targeted determination of xenobiotics in food by means of high resolution and accuracy mass spectrometry

The application of a high resolution and accurate mass spectrometry (HRAMS) approach to detect xenobiotics in different food matrices by means of non targeted determination by UHPLC-Orbitrap followed by data processing analysis was described. Three case studies were reported to demonstrate the possibility to identify unexpected substances in different food commodities overcomes targeted method. This innovative approach could lay the foundation for its applicability to routine analysis in the near future giving the possibility to open new horizons to the research of a wide range of xenobiotics.

Applications of nDATA for screening, quantitation, and identification of pesticide residues in fruits and vegetables using UHPLC/ESI Q-Orbitrap all ion fragmentation and data independent acquisition

High sample throughput and effective multiresidue methods for screening, quantitation, and identification are desired for the analysis of a large number of pesticides in routine monitoring programs for food safety. This study was designed to explore the use of an UHPLC/ESI Q-Orbitrap nontarget data acquisition for target analysis (nDATA) workflow for screening 655 pesticides and quantifying a small group of 46 most likely incurred pesticide residues in fruits and vegetables in a single analysis. High-resolution mass spectrometers such as the Q-Orbitrap offer unique applications for pesticide analysis using full MS scan with data independent acquisition (DIA) or all ion fragmentation (AIF) scan. The experiments were designed to achieve a balance between selectivity and cycle time by considering parameter settings such as mass resolution and the number of mass isolation windows or isolation window widths. Coupled with ultra-high performance liquid chromatography (UHPLC), both full MS/DIA and full MS/AIF nDATA workflows were evaluated for screening, quantification, and identification in a single analysis. In general, UHPLC/ESI full MS/vDIA detected more fragment ions per pesticide than AIF when one to four fragments were compared. UHPLC/ESI full MS/vDIA and AIF generated comparable quantitative results, but the latter provided slightly better repeatability likely due to its shorter cycle time and more scans across a chromatographic peak. UHPLC/ESI full MS/vDIA may be preferable for screening, quantitation and identification when the testing scope covers a few hundreds of pesticides in a single analysis.

Comprehensive strategy for pesticide residue analysis in cocoa beans through qualitative and quantitative approach

Multiresidue quantitative and qualitative screening method for the analysis of pesticide residues in dried cocoa beans was validated and applied to imported and domestic cocoa beans samples. The quantitative method comprises of 15 pesticides while the screening method covers 110 pesticides of different chemical classes. The method was based on modified QuEChERS (Quick Easy Cheap Efficient Rugged Safe) extraction and detection using triple quadrupole (QQQ-MS) and ion mobility quadrupole time of flight mass spectrometry (IMS-QTOF). The method was quantitatively validated in terms of linearity, limit of quantification (LOQ), specificity, selectivity, accuracy, and precision. On the other hand, screening detection limits were established for 110 pesticides. Finally, the optimized strategy was successfully applied for the routine analysis of pesticide residues in 137 cocoa bean samples and 32% of the total samples were found positive for ametryn, chlorpyrifos, isoprocarb, and metalaxyl.

Multiclass pesticide residue analysis in tobacco (Nicotiana tabacum) using high performance liquid chromatography-high resolution (Orbitrap) mass spectrometry: A simultaneous screening and quantitative method

Public exposure to pesticides through tobacco has attracted serious attention. Here we report a simultaneous screening and quantitation method for the non-target multiresidue analysis of pesticides in different tobacco types. The method involved extraction of a homogenate (20 g, containing 2 g tobacco) in ethyl acetate (10 mL), cleanup of 2 mL extract by dispersive solid phase extraction with PSA (50 mg)+C18 (50 mg)+GCB (25 mg)+MgSO4 (100 mg), followed by reconstitution in 1 mL acetonitrile:water (3:7) and analysis using HPLC with Quadrupole-Orbitrap mass spectrometry. The high resolution accurate mass analysis was performed through sequential full-scan (resolution=35000) and variable data independent acquisition (resolution=17500) events. When the method was evaluated in a mixture of 181 pesticides, it effectively minimised matrix interferences and false negatives. The target compounds included 5 pairs of isomers and 27 pairs of isobars, which were distinguished based on chromatographic separation, mass resolving power and/or unique product ions. The screening detection limit (SDL) for 86.4% of the test pesticides was set at 5 ng/g, while the remainder had the SDLs at 10 ng/g (9.3%) and 40 ng/g (4.3%). Nearly, 75% of the compounds showed recoveries of 70-120% at 10 ng/g. The rest of the compounds showed satisfactory recoveries at 40 and 100 ng/g. In all cases, precision-RSDs were < 20%. The established method demonstrated a successful performance in four different types of tobacco matrices while aligning with the guidelines of SANTE and US-FDA. Owing to its efficiency, the method is recommended for screening and quantitation of multiclass pesticides in tobacco.

High-resolution mass spectrometry for bioanalytical applications: Is this the new gold standard?

Liquid chromatography coupled to quadrupole-based tandem mass spectrometry (QqQ) is termed the "gold standard" for bioanalytical applications because of its unpreceded selectivity, sensitivity, and the ruggedness of the technology. More recently, however, high-resolution mass spectrometry (HRMS) has become increasingly popular for bioanalytical applications. Nonetheless, this technique is still viewed, either as a screening technology or as a research tool. Although HRMS is actively discussed during scientific conferences, it is yet to be widely utilised in routine laboratory settings and there remains a reluctance to use HRMS for quantitative measurements in regulated environments. This paper does not aim to comprehensively describe the potential of the latest HRMS technology, but rather, it focuses on what results can be obtained and outlines the author's experiences over a period of many years of the routine application of various forms of HRMS instrumentation. Fifteen years ago, some nine different QqQ methods were used in the author's laboratory to analyse a variety of different veterinary drug resides. Today, many more analytes are quantified by seven HRMS methods and just three QqQ methods remain in use for the analysis of a small set of compounds yet to be upgraded to HRMS analysis. This continual upgrading and migration of analytical methods were accompanied by regularly participating in laboratory proficiency tests (PTs). The PT reports (covering a range of analytes and analytical methods) were used to compare the accuracy of HRMS- versus QqQ-based measurements. In the second part of this paper, the particular strengths and limitations of HRMS for both method development and routine measurements are critically discussed. This also includes some anecdotal experiences encountered when replacing QqQ assays with HRMS methods.

Multi-residue analysis of pesticide residues and polychlorinated biphenyls in fruit and vegetables using orbital ion trap high-resolution accurate mass spectrometry

With the increasing demand on pesticide residue laboratories to increase their scope of analysis, high-resolution accurate mass (HRAM) systems have found increasing popularity in this area. The systems have the advantage of much more reliable confirmation as high resolution increases the ability to distinguish between masses which are close together and the mass accuracy achieved limits the number of structural formulae. To date, much of the work involving these systems has revolved around developing screening methods and little has been done on use of these systems for quantitative methods. Here we describe the development and validation of a quantitative method for the analysis of 167 pesticide residues and polychlorinated biphenyls (PCBs) in samples of fruit and vegetables according to the protocol described in EU SANTE guidance document. The determination method involves analysis using a GC QExactive orbitrap in full scan mode using EI. The samples were then extracted using the standard mini-Luke method. After extraction with acetone/dichloromethane/petroleum ether 40-60 °C, a solvent exchange into ethyl acetate is carried out. Recovery work was carried out in cucumber, lemon and broccoli representing high water content, high acid content and high chlorophyll content commodity groups. The results show that the default MRL of 10 ppb can be achieved for more than 93% of the pesticides studied. Mass accuracy, ion ratio and matrix effect studies show that the method is robust and provides a viable alternative to triple quadrupole mass spectrometer systems for the quantification of pesticide residues in fruit and vegetable samples.

Wide-scope target screening of >2000 emerging contaminants in wastewater samples with UPLC-Q-ToF-HRMS/MS and smart evaluation of its performance through the validation of 195 selected representative analytes

This study presents the development and validation of a comprehensive quantitative target methodology for the analysis of 2316 emerging pollutants in water based on Ultra-Performance Liquid Chromatography Quadrupole-Time-Of-Flight Mass Spectrometry (UPLC-Q-ToF-HRMS/MS). Target compounds include pesticides, pharmaceuticals, drugs of abuse, industrial chemicals, doping compounds, surfactants and transformation products, among others. The method was validated for 195 analytes, chosen to be representative of the chemical space of the target list, enabling the assessment of the performance of the method. The method involves a generic sample preparation based on mixed mode solid phase extraction, a UPLC-QTOF-MS/MS screening method using Data Independent Acquisition (DIA) mode, which provides MS and MS/MS spectra simultaneously and an elaborate strong post-acquisition evaluation of the data. The processing method was optimized to provide a successful identification rate >95 % and to minimize the number of false positive results (< 5 %). Decision limit (CCα) and detection capability (CCβ) were also introduced in the validation scheme to provide more realistic metrics on the performance of a HRMS-based wide-scope screening method. A new system of identification points (IPs) based on the one described in the Commission Decision 2002/657/EC was applied to communicate the confidence level in the identification of the analytes. This system considers retention time, mass accuracy, isotopic fit and fragmentation; taking full advantage of the capacities of the HRMS instruments. Finally, 398 contaminants were detected and quantified in real wastewater.

Development of two-dimensional gas chromatography (GC×GC) coupled with Orbitrap-technology-based mass spectrometry: Interest in the identification of biofuel composition

Comprehensive gas chromatography (GC) has emerged in recent years as the technique of choice for the analysis of volatile and semivolatile compounds in complex matrices. Coupling it with high-resolution mass spectrometry (MS) makes a powerful tool for identification and quantification of organic compounds. The results obtained in this study showed a significant improvement by using GC×GC-EI-MS in comparison with GC-EI-MS; the separation of chromatogram peaks was highly improved, which facilitated detection and identification. However, the limitation of Orbitrap mass analyzer compared with time-of-flight analyzer is the data acquisition rate; the frequency average was about 25 Hz at a mass resolving power of 15.000, which is barely sufficient for the proper reconstruction of the narrowest chromatographic peaks. On the other hand, the different spectra obtained in this study showed an average mass accuracy of about 1 ppm. Within this average mass accuracy, some reasonable elemental compositions can be proposed and combined with characteristic fragment ions, and the molecules can be identified with precision. At a mass resolving power of 7.500, the scan rate reaches 43 Hz and the GC×GC-MS peaks can be represented by more than 10 data points, which should be sufficient for quantification. The GC×GC-MS was also applied to analyze a cellulose bio-oil sample. Following this, a highly resolved chromatogram was obtained, allowing EI mass spectra containing molecular and fragment ions of many distinct molecules present in the sample to be identified.

Screening 89 Pesticides in Fishery Drugs by Ultrahigh Performance Liquid Chromatography Tandem Quadrupole-Orbitrap Mass Spectrometer

Multiclass screening of drugs with high resolution mass spectrometry is of great interest due to its high time-efficiency and excellent accuracy. A high-scale, fast screening method for pesticides in fishery drugs was established based on ultrahigh performance liquid chromatography tandem quadrupole-Orbitrap high-resolution mass spectrometer. The target compounds - were diluted in methanol and extracted by ultrasonic treatment, and the extracts were diluted with MeOH-water (1:1, v/v) and centrifuged to remove impurities. The chromatographic separation was performed on an Accucore aQ-MS column (100 mm × 2.1 mm, 2.6 μm) with gradient elution using 0.1% formic acid in water (containing 5 mmol/L ammonium formate) and 0.1% formic acid in methanol (containing 5 mmol/L ammonium formate) in Full Scan/dd-MS2 (TopN) scan mode. A screening database, including mass spectrometric and chromatographic information, was established for identification of compounds. The screening detection limits of methods ranged between 1–500 mg/kg, the recoveries of real samples spiked with the concentration of 10 mg/kg and 100 mg/kg standard mixture ranged from 70% to 110% for more than sixty compounds, and the relative standard deviations (RSDs) were less than 20%. The application of this method showed that target pesticides were screened out in 10 samples out of 21 practical samples, in which the banned pesticide chlorpyrifos were detected in 3 out of the 10 samples.

Investigations into the performance of travelling wave enabled conventional and cyclic ion mobility systems to characterise protomers of fluoroquinolone antibiotic residues

RATIONALE

Fluoroquinolones (FLQs) have been shown to form protomers with distinctive fragment profiles. Experimental parameters affect protomer formation, impacting observed conventional tandem mass spectrometric (MS/MS) dissociation and multiple reaction monitoring (MRM) transition reproducibility. Collision cross section (CCS) measurement can provide an additional identification metric and improved ion mobility (IM) separation strategies could provide further understanding of fluctuations in fragmentation when using electrospray ionisation (ESI).

METHODS

Porcine muscle tissue was fortified with nine fluoroquinolone antibiotics. Extracts were cleaned using QuEChERS dispersive extraction. Separation was achieved via ultra-high-performance liquid chromatography (UHPLC) and analysis performed using positive ion ESI coupled with linear T-wave IM (N₂ and CO₂ drift gas) and cyclic IM-MS (calibrated to perform accurate mass and CCS measurement).

RESULTS

IM-resolved protomeric species have been observed for nine FLQs (uniquely three for danofloxacin). Long-term reproducibility and cross-platform T-wave/cIM studies have demonstrated CCS metric errors <1.5% when compared with a FLQ protomer reference CCS library. When comparing FLQ protomer separation using a standard, linear T-wave IM separator (N₂ /CO₂ ) and using a high-resolution cyclic T-wave device (N₂ ), protomer peak-to-peak resolution ranged between Rs = 1 to Rs = 6 for the IM strategies utilised.

CONCLUSIONS

CCS is a reliable cross platform metric; specific FLQ CCS identification fingerprints have been produced, illustrating the potential to compliment MS/MS specificity or provide an alternative identification metric. Using cIM there is opportunity to correlate the erratic nature of protomer formation with the analytical conditions used and to gain further understanding of ionisation/dissociation mechanisms taking place during routine analyses.

Optimization of Resolving Power, Fragmentation, and Mass Calibration in an Orbitrap Spectrometer for Analysis of 24 Pesticide Metabolites in Urine

Mass spectrometer parameters such as Resolving Power, type of fragmentation, and mass calibration mode were optimized in the analysis of 24 pesticide metabolites in human urine using Ultra-High Pressure Liquid Chromatography coupled to Orbitrap High-Resolution Mass Spectrometer (UHPLC-HRMS). The best results were achieved with a Resolving Power of 25,000 FWHM and by applying Collision Induced Dissociation fragmentation mode (40 eV).

Multiclass screening of >200 pharmaceutical and other residues in aquatic foods by ultrahigh-performance liquid chromatography-quadrupole-Orbitrap mass spectrometry

A quick screening method of more than 200 pharmaceutical and other residues in aquatic foods based on ultrahigh-performance liquid chromatography-quadrupole-Orbitrap mass spectrometry (UHPLC-Q/Orbitrap MS) was established. In this method, after the addition of 200 μL of 1 M EDTA-Na₂, 2 g of each sample homogenate was extracted successively with 10 mL of acetonitrile and 10 mL of ethyl acetate. The extracts were combined, dried under nitrogen flow, and redissolved in 0.1% formic acid in acetonitrile/water (4:6, v/v) for analysis. The prepared samples were analyzed by UHPLC- Q/Orbitrap MS system in Full MS/ddMS² (full-scan data-dependent MS/MS) mode. Compound identification was performed through comparison of the sample data with the database for standard chemicals, including the retention time, precursor ion, product ions, and isotope pattern for all 206 compounds. Five different aquatic food matrices (carp, shrimp, crab, eel, and mussel) spiked with the analytes at 1, 10, and 50 ng/g were evaluated to assess recoveries, precision, matrix effects, stability, and detection limits using the method. UHPLC analyses required 25 min, and 178-200 analytes met identification criteria at 50 ng/g depending on the matrix. Furthermore, practical application of this method for real samples displayed strong screening capability. Graphical abstract A quick screening method of >200 pharmaceutical and other residues in aquatic foods based on ultrahighperformance liquid chromatography-quadrupole-Orbitrap mass spectrometer was established. Fivedifferent aquatic food matrices, including carp, shrimp, crab, eel and mussel, were studied to evaluatescreen limit at 1, 10 and 50 μg·kg-1 level. Results suggest the high reliability, high time-efficiency and goodsimplicity of the method.

MS-Based Analytical Techniques: Advances in Spray-Based Methods and EI-LC-MS Applications

Mass spectrometry is the most powerful technique for the detection and identification of organic compounds. It can provide molecular weight information and a wealth of structural details that give a unique fingerprint for each analyte. Due to these characteristics, mass spectrometry-based analytical methods are showing an increasing interest in the scientific community, especially in food safety, environmental, and forensic investigation areas where the simultaneous detection of targeted and nontargeted compounds represents a key factor. In addition, safety risks can be identified at the early stage through online and real-time analytical methodologies. In this context, several efforts have been made to achieve analytical instrumentation able to perform real-time analysis in the native environment of samples and to generate highly informative spectra. This review article provides a survey of some instrumental innovations and their applications with particular attention to spray-based MS methods and food analysis issues. The survey will attempt to cover the state of the art from 2012 up to 2017.

Atmospheric Pressure Vaporization Mechanism for Coupling a Liquid Phase with Electron Ionization Mass Spectrometry

A novel liquid chromatography-mass spectrometry (LC-MS) interfacing concept is presented and discussed. The new interface, called liquid-EI (LEI), is based on electron ionization (EI) but, differently from any previous attempt, the vaporization of solutes and mobile phase takes place at atmospheric pressure into a specifically designed region, called "vaporization microchannel", before entering the high-vacuum ion source. The interface is completely independent from the rest of the instrumentation and can be adapted to any gas chromatography/mass spectrometry (GC/MS) system, as an add-on for a rapid LC-MS conversion. Pressure drop and temperature gradient between LC and MS were considered to enhance the analyte response and reduce band broadening and/or solute carryovers. A fused silica liner, placed inside the vaporization microchannel, acts as an inert vaporization surface speeding up the gas-phase conversion of large molecules while lessening possible memory effects. The liner is easily replaceable for a quick and extremely simple interface maintenance. Proof of concept and detailed description of the interface are here presented.

Development and Validation of a Qualitative Method for Target Screening of 448 Pesticide Residues in Fruits and Vegetables Using UHPLC/ESI Q-Orbitrap Based on Data-Independent Acquisition and Compound Database

A semiautomated qualitative method for target screening of 448 pesticide residues in fruits and vegetables was developed and validated using ultrahigh-performance liquid chromatography coupled with electrospray ionization quadrupole Orbitrap high-resolution mass spectrometry (UHPLC/ESI Q-Orbitrap). The Q-Orbitrap Full MS/dd-MS² (data dependent acquisition) was used to acquire product-ion spectra of individual pesticides to build a compound database or an MS library, while its Full MS/DIA (data independent acquisition) was utilized for sample data acquisition from fruit and vegetable matrices fortified with pesticides at 10 and 100 μg/kg for target screening purpose. Accurate mass, retention time and response threshold were three key parameters in a compound database that were used to detect incurred pesticide residues in samples. The concepts and practical aspects of in-spectrum mass correction or solvent background lock-mass correction, retention time alignment and response threshold adjustment are discussed while building a functional and working compound database for target screening. The validated target screening method is capable of screening at least 94% and 99% of 448 pesticides at 10 and 100 μg/kg, respectively, in fruits and vegetables without having to evaluate every compound manually during data processing, which significantly reduced the workload in routine practice.

Risk assessment of airborne pesticides in a Mediterranean region of Spain

A risk assessment strategy based on the quantitative target analysis and semi-quantitative retrospective screening determination of pesticides in PM10 has been developed. The proposed methodology was applied to 345 real samples from nine stations of a Mediterranean area in Spain, and the risk was assessed for adult, children and infants. Forty pesticides were detected with average concentrations ranging from 8 to 30,000pgm^-3. Each station showed its specific pesticide profile, which is linked to the different types of crops around each station. For adults, children and infants the estimated chronic inhalation risk, expressed as Hazard Quotient (HQ), was <1 for all pesticides. The cumulative exposure for organophosphates, neonicotinoids, benzimidazoles, carbamates, micro-organism and triazoles pesticides (HI, Hazard Index) were <1 for the three groups of populations assessed. For infants, the cancer risk estimated for the detected pesticides classified as possible and potential carcinogens were lower than 1.0 E-06, except for carbendazim and hexythiazox.

Ion-Mobility-Derived Collision Cross Section as an Additional Identification Point for Multiresidue Screening of Pesticides in Fish Feed

Ion mobility spectrometry allows for the measurement of the collision cross section (CCS), which provides information about the shape of an ionic molecule in the gas phase. Although the hyphenation of traveling-wave ion mobility spectrometry (TWIMS) with high-resolution quadrupole time-of-flight mass spectrometry (QTOFMS) has been mainly used for structural elucidation purposes, its potential for fast screening of small molecules in complex samples has not yet been thoroughly evaluated. The current work explores the capabilities of ultrahigh-performance liquid chromatography (UHPLC) coupled to a new design TWIMS-QTOFMS for the screening and identification of a large set of pesticides in complex salmon feed matrices. A database containing TWIMS-derived CCS values for more than 200 pesticides is hereby presented. CCS measurements showed high intra- and interday repeatability (RSD < 1%), and they were not affected by the complexity of the investigated matrices (ΔCCS ≤ 1.8%). The use of TWIMS in combination with QTOFMS was demonstrated to provide an extra-dimension, which resulted in increased peak capacity and selectivity in real samples. Thus, many false-positive detections could be straightforwardly discarded just by applying a maximum ΔCCS tolerance of ±2%. CCS was proposed as a valuable additional identification point in the pesticides screening workflow. Several commercial fish feed samples were finally analyzed to demonstrate the applicability of the proposed approach. Ethoxyquin and pirimiphos-methyl were identified in most of the analyzed samples, whereas tebuconazole and piperonil butoxide were identified for the first time in fish feed samples.

Fourier Transform Mass Spectrometry: The Transformation of Modern Environmental Analyses

Unknown compounds in environmental samples are difficult to identify using standard mass spectrometric methods. Fourier transform mass spectrometry (FTMS) has revolutionized how environmental analyses are performed. With its unsurpassed mass accuracy, high resolution and sensitivity, researchers now have a tool for difficult and complex environmental analyses. Two features of FTMS are responsible for changing the face of how complex analyses are accomplished. First is the ability to quickly and with high mass accuracy determine the presence of unknown chemical residues in samples. For years, the field has been limited by mass spectrometric methods that were based on knowing what compounds of interest were. Secondly, by utilizing the high resolution capabilities coupled with the low detection limits of FTMS, analysts also could dilute the sample sufficiently to minimize the ionization changes from varied matrices.

Retrospective screening of pesticide metabolites in ambient air using liquid chromatography coupled to high-resolution mass spectrometry

A new methodology for the retrospective screening of pesticide metabolites in ambient air was developed, using liquid chromatography coupled to Orbitrap high-resolution mass spectrometry (UHPLC-HRMS), including two systematic workflows (i) post-run target screening (suspect screening) and (ii) non-target screening. An accurate-mass database was built and used for the post-run screening analysis. The database contained 240 pesticide metabolites found in different matrixes such as air, soil, water, plants, animals and humans. For non-target analysis, a "fragmentation-degradation" relationship strategy was selected. The proposed methodology was applied to 31 air samples (PM10) collected in the Valencian Region (Spain). In the post-target analysis 34 metabolites were identified, of which 11 (3-ketocarburan, carbofuran-7-phenol, carbendazim, desmethylisoproturon, ethiofencarb-sulfoxide, malaoxon, methiocarb-sulfoxide, N-(2-ethyl-6-methylphenyl)-L-alanine, omethoate, 2-hydroxy-terbuthylazine, and THPAM) were confirmed using analytical standards. The semiquantitative estimated concentration ranged between 6.78 and 198.31 pg m(-3). Likewise, two unknown degradation products of malaoxon and fenhexamid were elucidated in the non-target screening.

Multi-mycotoxin Analysis of Finished Grain and Nut Products Using Ultrahigh-Performance Liquid Chromatography and Positive Electrospray Ionization-Quadrupole Orbital Ion Trap High-Resolution Mass Spectrometry

Ultrahigh-performance liquid chromatography using positive electrospray ionization and quadrupole orbital ion trap high-resolution mass spectrometry was evaluated for analyzing mycotoxins in finished cereal and nut products. Optimizing the orbital ion trap mass analyzer in full-scan mode using mycotoxin-fortified matrix extracts gave mass accuracies, δM, of < ± 2.0 ppm at 70,000 full width at half maximum (FWHM) mass resolution (RFWHM). The limits of quantitation were matrix- and mycotoxin-dependent, ranging from 0.02 to 11.6 μg/kg. Mean recoveries and standard deviations for mycotoxins from acetonitrile/water extraction at their relevant fortification levels were 91 ± 10, 94 ± 10, 98 ± 12, 91 ± 13, 99 ± 15, and 93 ± 17% for corn, rice, wheat, almond, peanut, and pistachio, respectively. Nineteen mycotoxins with concentrations ranging from 0.3 (aflatoxin B1 in peanut and almond) to 1175 μg/kg (fumonisin B1 in corn flour) were found in 35 of the 70 commercial grain and nut samples surveyed. Mycotoxins could be identified at δM < ± 5 ppm by identifying the precursor and product ions in full-scan MS and data-dependent MS/MS modes. This method demonstrates a new analytical approach for monitoring mycotoxins in finished grain and nut products.

Travelling-wave ion mobility time-of-flight mass spectrometry as an alternative strategy for screening of multi-class pesticides in fruits and vegetables

This paper reports a novel approach to screening multi-class pesticides by ion mobility time-of-flight mass spectrometry detection. Nitrogen was selected as mobility gas. After optimization of the different ion mobility parameters, determination of matrix effect on the drift times was conducted using different matrix extracts. The results showed that drift time values are not influenced by the matrix and also are independent of the concentration within the working range for 100 pesticides tested, making drift time a powerful additional identification tool. Based on statistics, 2% variation criteria provides a good fit for all the pesticides targeted, and could be considered as a maximum acceptable criteria associated with the drift time parameter for identification purpose. This 2% value is in agreement with already reported criteria, for instance, for GC or LC retention time in European documents. Finally, the well-known feature of mobility to separate complex mixtures was also tested to obtain purified extracted mass spectra of pesticides present in fruit extract.