Monolithic molecularly imprinted solid-phase extraction for the selective determination of trace cytokinins in plant samples with liquid chromatography–electrospray tandem mass spectrometry

Achieving "Pesticide-Pest Mutual Management" through pest-derived biochar

This study proposes a novel "pesticide-pest mutual management" strategy, transforming the traditional unidirectional impact of pesticides on pests into a sustainable and interactive process. Using the Asian longhorned beetle (Anoplophora glabripennis, ALB) as a precursor, a series of nitrogen-rich biochars (ALB-BC) was synthesized to remove and detect insecticides used in ALB control from water. Among them, acid-modified ALB-BC (HBC 400) exhibited an exceptional adsorption capacity for thiacloprid, reaching 1591.06 mg g-1. Mechanistic studies revealed that Lewis acid-base interactions serve as the primary adsorption mechanism, underpinning ALB-BC's high affinity for thiacloprid. Additional mechanisms, including hydrogen bonding, π-π interactions, and pore filling, further enhanced adsorption performance. These interactions were attributed to the high concentrations of carbonyl and hydroxyl groups, as well as nitrogen species (e.g., pyridinic-N, pyrrolic-N) in ALB-BC, derived from the abundant peptide bonds and polysaccharide structures in ALB. Furthermore, ALB-BC effectively extracted and detected poorly water-soluble insecticides (e.g., cyhalothrin, cypermethrin, and fenitrothion) used in ALB control, alongside thiacloprid, achieving recoveries of 84 %-96 % and detection limits of 0.04-0.09 μg L-1. This study highlights the potential of utilizing forestry pest resources for sustainable applications and demonstrates promising prospects in environmental monitoring and pollution mitigation.

Synthesis of a New Molecularly Imprinted Polymer and Optimisation of Phenylglyoxylic Acid Extraction from Human Urine Samples Using a Central Composite Design within the Response Surface Methodology

Styrene, a chemical widely used in various industries, undergoes metabolic breakdown in the human body, resulting in the production of phenylglyoxylic acid (PGA). A novel molecularly imprinted polymer (MIP) was synthesised for selective extraction and enrichment of PGA in urine samples prior to high-performance liquid chromatography. The MIP employed in this research was a 4-vinylpyridine molecularly imprinted polymer (4-VPMIP) prepared via mass polymerisation using a noncovalent method. The structural and morphological characteristics of the molecularly imprinted polymers (MIPs) and non-imprinted polymers (NIPs) were evaluated using Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The efficiency of the molecularly imprinted solid-phase extraction (MISPE) process was optimised by investigating critical variables such as sample pH, sorbent mass, sample flow rate, and volume of the elution solvent. A central composite design (CCD) within the response surface methodology was utilised to develop separate models for the adsorption and desorption steps. Analysis of variance (ANOVA) confirmed the excellent fit of the experimental data to the proposed response models. Under the optimised conditions, the molecularly imprinted polymers exhibited a higher degree of selectivity and affinity for PGA, with a relative selectivity coefficient (α) of 2.79 against hippuric acid. The limits of detection (LOD) and quantification (LOQ) for PGA were determined to be 0.5 mg/L and 1.6 mg/L, respectively. The recoveries of PGA ranged from 97.32% to 99.06%, with a relative standard deviation (RSD) lower than 4.6%. Furthermore, MIP(4VP)SPE demonstrated the potential for recycling up to three times without significant loss in analyte recovery.

Recent advances in emerging application of functional materials in sample pretreatment methods for liquid chromatography-mass spectrometry analysis of plant growth regulators: A mini-review

Plant growth regulators (PGRs) are a class of small molecular compounds, which can remarkably affect the physiological process of plants. The complex plant matrix along with a wide polarity range and unstable chemical properties of PGRs hinder their trace analysis. In order to obtain a reliable and accurate result, a sample pretreatment process must be carried out, including eliminating the interference of the matrix effect and pre-concentrating the analytes. In recent years, the research of functional materials in sample pretreatment has experienced rapid growth. This review comprehensively overviews recent development in functional materials covering one-dimensional materials, two-dimensional materials, and three-dimensional materials applied in the pretreatment of PGRs before liquid chromatography-mass spectrometry (LC-MS) analysis. Besides, the advantages and limitations of the above functionalized enrichment materials are discussed, and their future trends have been prospected. The work could be helpful to bring new insights for researchers engaged in functional materials in sample pretreatment of PGRs based on LC-MS.

Polymer brush grafted immobilized metal ion affinity adsorbent based on polydopamine/polyethyleneimine-coated magnetic graphene oxide for selective enrichment of cytokinins in plants

An immobilized metal affinity (IMAC) adsorbent was prepared for selective enrichment of adenine type CKs, via grafting polymer chain pendant with iminodiacetic acid (IDA) from polydopamine (PDA)/polyethyleneimine (PEI)-coated magnetic graphene oxide (magGO) via surface-initiated-atom transfer radical polymerization (SI-ATRP). The prepared IMAC sorbent exhibited remarkable adsorption performances and good selectivity for adenine-type CKs and was utilized as a sorbent of magnetic solid-phase extraction (MSPE) for effective enrichment of four adenine-type CKs in bean sprouts. Under the optimized extraction conditions, an analytical method for four adenine type CKs in bean sprouts was established by combining the MSPE combined with ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). The recoveries of the analytes were between 80.4 ± 1.9% and 114.6 ± 1.5% (n = 3). The limits of detection (LODs) range from 0.63 to 2.30 pg⋅mL^-1. The relative standard deviations of intra-day and inter-day were less than 12.6%. The established method was successfully applied to the selective extraction and sensitive detection of trace adenine-type CKs in plant samples.

Evaluation of MXene as an adsorbent in dispersive solid phase extraction of several pesticides from fresh fruit juices prior to their determination by HPLC-MS/MS

This study aimed to introduce a dispersive solid phase extraction method based on MXene nanoparticles as a novel sorbent for the simultaneous extraction and determination of twelve pesticides from fresh fruit juices. In the following, a high performance liquid chromatography-tandem mass spectrometry was used for their determination in the samples. In this method, two-dimensional nanomaterials of Ti₂AlC were exfoliated in an acidic solution and then they were added into the sample solution. To enhance the sample solution and sorbent contact area, the mixture was vortexed for a few minutes. Then the adsorbed analytes onto the sorbent were eluted using acetone and then analyzed. Under optimal conditions, the calibration curves of the method were linear within the range of 3.0-1000 µg L^-1. The limits of detection, intra- and inter-day relative standard deviations, and extraction recoveries were in the ranges of 0.08-1.0 µg L^-1, 2.5-4.2%, 2.5-5.5%, and 69-75%, respectively. Performing the method verified the presence of some of the analytes in several samples. This method can help to monitor pesticides in juice samples as well as to improve our understanding the safety of foods.

Aptamer functionalized and reduced graphene oxide hybridized porous polymers SPE coupled with LC-MS for adsorption and detection of human α-thrombin

In this study, reduced graphene oxide (rGO) hybridized high internal phase emulsions were developed and polymerized as porous carriers for aptamer (5'/5AmMC6/-AGT CCG TGG TAG GGC AGG TTG GGG TGA CT-3') modification to enrich human α-thrombin from serum. The structure and properties of the materials were confirmed by scanning electron microscope (SEM), Fourier transform infrared spectroscope (FT-IR), and X-ray photoelectron spectra (XPS). The adsorption ability and selectivity were studied and the thrombin was detected with liquid chromatography-mass spectrometry (LC-MS). The adsorption of thrombin onto the sorbent was achieved within 30 min and the desorption was realized using 5.0 mL of acetonitrile/water (80/20, v/v). The thrombin was quantified by LC-MS according to its characteristic peptide sequence of ELLESYIDGR.

Recent application of molecular imprinting technique in food safety

Due to the extensive use of chemical substances such as pesticides, antibiotics and food additives, food safety issues have gradually attracted people's attention. The extensive use of these chemicals seriously damages human health. In order to detect trace chemical residues in food, researchers have to find several simple, economical and effective tools for qualitative and quantitative analysis. As a kind of material that specifically and selectively recognize template molecules from real samples, molecular imprinting technique (MIT) has widely applied in food samples analysis. This article mainly reviews the application of molecularly imprinted polymer (MIP) in the detection of chemical residues from food in the past five years. Some recent and novel methods for fabrication of MIP are reviewed. Their application of sample pretreatment, sensors, etc. in food analysis is reviewed. The application of molecular imprinting in chromatographic stationary phase is referred. Additionally, the challenges faced by MIP are discussed.

Green molecularly imprinted polymers for sustainable sample preparation

The use of molecularly imprinted polymers in sample preparation as selective sorbent materials has received great attention during the last years leading to analytical methods with unprecedented selectivity. However, with the progressive implementation of Green Analytical Chemistry principles, it is necessary to critically review the greenness of synthesis and further use of molecularly imprinted polymers in sample preparation. Accordingly, in the present review, the different steps and strategies for the preparation of molecularly imprinted polymers, the used reagents, as well as their incorporation to microextraction techniques are reviewed from a green perspective and recent alternatives to make the use of molecularly imprinted polymers more sustainable are provided.

Optimising factors affecting solid phase extraction performances of molecular imprinted polymer as recent sample preparation technique

Molecular imprinted solid-phase extraction is the technique that uses molecular imprinted polymer as the sorbent in solid phase extraction. Molecular imprinted solid-phase extraction is effective and efficient for the extraction process and cleaning as compared with solid phase extraction (SPE) without molecular imprinted polymer. The complexity of variables in molecular imprinted solid-phase extraction arise as problems in the analysis, therefore it is necessary to optimize the extraction conditions of molecular imprinted solid-phase extraction. To achieve the sorption equilibrium and achieve the shortest time, certain parameters such as contact time, ion strength of sample, pH of sample, amount of sorbent, sample flow rate, addition of salt and buffer solution, washing solvent, elution solvent, and loading solvent need to be optimized. The selection of suitable properties and quantities of each factor greatly affect the formation of appropriate interactions between the sorbent and analytes. Percentage recovery is also influenced by formation of the appropriate bonds, sample flow rates, extraction time, salt addition, and sorbent mass. Therefore, in the future, molecular imprinted solid-phase extraction optimization has to consider and adjust various factors reviewed in this paper to form appropriate interactions between the absorbent and target molecules which have an impact on the optimal results.

Supramolecular solvent-based high-throughput sample treatment for monitoring phytohormones in plant tissues

Quantification of endogenous hormones in plants is essential to understand their growth, development and response to biotic and abiotic stresses. However, it is challenging to develop high-throughput sample treatments from complex plant tissues containing low amounts of structurally unrelated and labile phytohormones while delivering clean and analyte-enriched extracts. In this paper we propose the use of supramolecular solvents (SUPRASs) made up or inverted hexagonal nanostructures of alkanols to address this challenge. The strategy was applied, as a proof of concept, to the quantification of stress-related phytohormones belonging to different categories (abscisic acid, salicylic acid, jasmonic acid, methyl jasmonate and 3-indoleacetic acid) in melon and pepper leaves. Sample treatment consisted in a single extraction-cleanup step involving the use of a low volume of SUPRAS (244 μL), the stirring (5 min) and centrifugation (15 min) of the sample at room temperature, and the direct analysis of the extract by liquid chromatography tandem mass spectrometry (LC-MS/MS). This high-throughput sample treatment method delivered excellent results for the target phytohormones regarding absolute recoveries (80-92%), method quantification limits (0.05-2 ng g^-1), reproducibility (1-7%) and matrix effects (+13 to -31%), in both melon and pepper leaves, compared to reported methods based on repetitive solvent extraction, purification and solvent evaporation steps. The method was successfully applied to determine target hormones in melon and pepper plants for the evaluation of the effect of thermal stress. It was found that their concentration increased in the ranges 1.2-1.9 and 1.3-3.8 times in melon and pepper leaves, respectively, compared with control samples.

Assembly and application advancement of organic-functionalized graphene-based materials: A review

Owing to the remarkable physicochemical properties such as hydrophobicity, conductivity, elasticity, and light weight, graphene-based materials have emerged as one of the most appealing carbon allotropes in materials science and chemical engineering. Unfortunately, pristine graphene materials lack functional groups for further modification, severely hindering their practical applications. To render graphene materials with special characters for different applications, graphene oxide or reduced graphene oxide has been functionalized with different organic agents and assembled together, via covalent binding and various noncovalent forces such as π-π interaction, electrostatic interaction, and hydrogen bonding. In this review, we briefly discuss the state-of-the-art synthetic strategies and properties of organic-functionalized graphene-based materials, and then, present the prospective applications of organic-functionalized graphene-based materials in sample preparation.

Electrochemical aptasensors for zeatin detection based on MoS2 nanosheets and enzymatic signal amplification

A simple and sensitive electrochemical aptasensor was constructed for zeatin detection, where MoS2 nanosheets were used as the immobilization matrix for gold nanoparticles (AuNPs), and AuNPs were employed as the immobilization matrix to probe DNA. After the aptamer DNA and assist DNA hybridized with probe DNA, Y-type DNA can be formed with two biotins at the terminals of aptamer DNA. Then, avidin modified alkaline phosphatase (Avidin-ALP) can be further modified on the electrode surface through the biotin and avidin interaction. Under the catalytic effect of ALP, p-nitrophenylphosphate disodium (PNPP) can be hydrolyzed to produce p-nitrophenol (PNP). However, in the presence of zeatin, the formed Y-type DNA can be destroyed due to the formation of the zeatin-aptamer conjugate, which further reduces the amount of PNP and leads to the decrease of the oxidation signal of PNP. Under the optimum conditions, the change of the oxidation peak current of PNP was inversely proportional to the logarithm value of zeatin concentration in the range of 50 pM-50 nM. The detection limit was calculated to be 16.6 pM. This electrochemical method also showed good detection selectivity and stability. The potential applicability of this method was proved by detecting zeatin in real samples.

Zooming In on Plant Hormone Analysis: Tissue- and Cell-Specific Approaches

Plant hormones are a group of naturally occurring, low-abundance organic compounds that influence physiological processes in plants. Our knowledge of the distribution profiles of phytohormones in plant organs, tissues, and cells is still incomplete, but advances in mass spectrometry have enabled significant progress in tissue- and cell-type-specific analyses of phytohormones over the last decade. Mass spectrometry is able to simultaneously identify and quantify hormones and their related substances. Biosensors, on the other hand, offer continuous monitoring; can visualize local distributions and real-time quantification; and, in the case of genetically encoded biosensors, are noninvasive. Thus, biosensors offer additional, complementary technologies for determining temporal and spatial changes in phytohormone concentrations. In this review, we focus on recent advances in mass spectrometry-based quantification, describe monitoring systems based on biosensors, and discuss validations of the various methods before looking ahead at future developments for both approaches.

Microscale magnetic microparticle-based immunopurification of cytokinins from Arabidopsis root apex

Cytokinins (CKs) are pivotal plant hormones that have crucial roles in plant growth and development. However, their isolation and quantification are usually challenging because of their extremely low levels in plant tissues (pmol g^-1 fresh weight). We have developed a simple microscale magnetic immunoaffinity-based method for selective one-step isolation of CKs from very small amounts of plant tissue (less than 0.1 mg fresh weight). The capacity of the immunosorbent and the effect of the complex plant matrix on the yield of the rapid one-step purification were tested using a wide range of CK concentrations. The total recovery range of the new microscale isolation procedure was found to be 30-80% depending on individual CKs. Immunoaffinity extraction using group-specific monoclonal CK antibodies immobilized onto magnetic microparticles was combined with a highly sensitive ultrafast mass spectrometry-based method with a detection limit close to one attomole. This combined approach allowed metabolic profiling of a wide range of naturally occurring CKs (bases, ribosides and N⁹ -glucosides) in 1.0-mm sections of the Arabidopsis thaliana root meristematic zone. The magnetic immunoaffinity separation method was shown to be a simple and extremely fast procedure requiring minimal amounts of plant tissue.

High-Resolution Cell-Type Specific Analysis of Cytokinins in Sorted Root Cell Populations of Arabidopsis thaliana

We describe a method combining fluorescence-activated cell sorting (FACS) with one-step miniaturized isolation and accurate quantification of cytokinins (CKs) using ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) to measure these phytohormones in specific cell types of Arabidopsis thaliana roots. The methodology provides information of unprecedented resolution about spatial distributions of CKs, and thus should facilitate attempts to elucidate regulatory networks involved in root developmental processes.

High-internal-phase-emulsion polymeric monolith coupled with liquid chromatography-electrospray tandem mass spectrometry for enrichment and sensitive detection of trace cytokinins in plant samples

High-internal-phase-emulsion polymers (polyHIPEs) show great promise as solid-phase-extraction (SPE) materials because of the tremendous porosity and highly interconnected framework afforded by the high-internal-phase-emulsion (HIPE) technique. In this work, polyHIPE monolithic columns as novel SPE materials were prepared and applied to trace enrichment of cytokinins (CKs) from complex plant samples. The polyHIPE monoliths were synthesized via the in-situ polymerization of the continuous phase of a HIPE containing styrene (STY) and divinylbenzene (DVB) in a stainless column, and revealed highly efficient and selective enrichment ability for aromatic compounds. Under the optimized experimental conditions, a method using a monolithic polyHIPE column combined with liquid chromatography-electrospray tandem mass spectrometry (LC-MS-MS) was developed for the simultaneous extraction and sensitive determination of trans-zeatin (tZ), meta-topolin (mT), kinetin (K), and kinetin riboside (KR). The proposed method had good linearity, with correlation coefficients (R (2)) from 0.9957 to 0.9984, and low detection limits (LODs, S/N = 3) in the range 2.4-47 pg mL(-1) for the four CKs. The method was successfully applied to the determination of CKs in real plant samples, and obtained good recoveries ranging from 68.8 % to 103.0 % and relative standard deviations (RSDs) lower than 16 %.

Quo vadis plant hormone analysis?

Plant hormones act as chemical messengers in the regulation of myriads of physiological processes that occur in plants. To date, nine groups of plant hormones have been identified and more will probably be discovered. Furthermore, members of each group may participate in the regulation of physiological responses in planta both alone and in concert with members of either the same group or other groups. The ideal way to study biochemical processes involving these signalling molecules is 'hormone profiling', i.e. quantification of not only the hormones themselves, but also their biosynthetic precursors and metabolites in plant tissues. However, this is highly challenging since trace amounts of all of these substances are present in highly complex plant matrices. Here, we review advances, current trends and future perspectives in the analysis of all currently known plant hormones and the associated problems of extracting them from plant tissues and separating them from the numerous potentially interfering compounds.

A simple sample preparation approach based on hydrophilic solid-phase extraction coupled with liquid chromatography-tandem mass spectrometry for determination of endogenous cytokinins

Cytokinins (CKs), a vital family of phytohormones, play important roles in the regulation of shoot and root development. However, the quantification of CKs in plant samples is frequently affected by the complex plant matrix. In the current study, we developed a simple, rapid and efficient hydrophilic interaction chromatography-solid phase extraction (HILIC-SPE) method for CKs purification. CKs were extracted by acetonitrile (ACN) followed by HILIC-SPE (silica as sorbents) purification. The extraction solution of plant samples could be directly applied to HILIC-SPE without solvent evaporation step, which simplified the analysis process. Moreover, with HILIC chromatographic retention mechanism, the hydrophobic co-extracted impurities were efficiently removed. Subsequently, CKs were separated by RPLC, orthogonal to the HILIC pretreatment process, and detected by tandem mass spectrometry. The method exhibits high specificity and recovery yield (>77.0%). Good linearities were obtained for all eight CKs ranging from 0.002 to 100ngmL(-1) with correlation coefficients (r) higher than 0.9927. The limits of detection (LODs, signal/noise=5) for the CKs were between 1.0 and 12.4pgmL(-1). Reproducibility of the method was evaluated by intra-day and inter-day measurements and the results showed that relative standard deviations (RSDs) were less than 10.5%. Employing this method, we successfully quantified six CKs in 20mg Oryza sativa leaves and the method was also successfully applied to Brassica napus (flower and leaves).

Simultaneous determination of 2-naphthoxyacetic acid and indole-3-acetic acid by first derivation synchronous fluorescence spectroscopy

A simple, rapid, sensitive and selective method for simultaneously determining 2-naphthoxyacetic acid (BNOA) and Indole-3-Acetic Acid (IAA) in mixtures has been developed using derivation synchronous fluorescence spectroscopy based on their synchronous fluorescence. The synchronous fluorescence spectra were obtained with Δλ=100 nm in a pH 8.5 NaH2PO4-NaOH buffer solution, and the detected wavelengths of quantitative analysis were set at 239 nm for BNOA and 293 nm for IAA respectively. The over lapped fluorescence spectra were well separated by the synchronous derivative method. Under optimized conditions, the limits of detection (LOD) were 0.003 μg/mL for BNOA and 0.012 μg/mL for IAA. This method is simple and expeditious, and it has been successfully applied to the determination of 2-naphthoxyacetic acid and indole-3-acetic acid in fruit juice samples with satisfactory results. The samples were only filtrated through a 0.45 μm membrane filter, which was free from the tedious separation procedures. The obtaining recoveries were in the range of 83.88-87.43% for BNOA and 80.76-86.68% for IAA, and the relative standard deviations were all less than 5.0%. Statistical comparison of the results with high performance liquid chromatography Mass Spectrometry (HPLC-MS) method revealed good agreement and proved that there were no significant difference in the accuracy and precision between these two methods.