Monitoring dynamic release of intracellular hydrogen peroxide through a microelectrode based enzymatic biosensor

In situ monitoring of cytoplasmic dopamine levels by noble metals decorated carbon fiber tips

Dopamine (DA), a catecholamine neurotransmitter, is crucial in brain signal transmission. Monitoring cytoplasmic DA levels can reflect changes in metabolic factors and provide valuable information for researching the mechanisms involved in neurodegenerative diseases. However, the in-situ detection of intracellular DA is constrained by its low contents in small-sized single cells. In this work, we report that noble metal (Au, Pt)-modified carbon fiber micro-nanoelectrodes are capable of real-time detection of DA in single cells with excellent sensitivity, selectivity, and anti-contamination capabilities. Notably, noble metals can be modified on the electrode surface through electrochemical deposition to enhance the conductivity of the electrode and the oxidation current of DA by 50 %. The nanosensors can work stably and continuously in rat adrenal pheochromocytoma cells (PC12) to monitor changes in DA levels upon K+ stimulation. The functionalized carbon fibers based nanosensors will provide excellent prospects for DA analysis in the brains of living animals.

Recent Advances in Electrochemical Sensing of Hydrogen Peroxide (H2O2) Released from Cancer Cells

Cancer is by far the most common cause of death worldwide. There are more than 200 types of cancer known hitherto depending upon the origin and type. Early diagnosis of cancer provides better disease prognosis and the best chance for a cure. This fact prompts world-leading scientists and clinicians to develop techniques for the early detection of cancer. Thus, less morbidity and lower mortality rates are envisioned. The latest advancements in the diagnosis of cancer utilizing nanotechnology have manifested encouraging results. Cancerous cells are well known for their substantial amounts of hydrogen peroxide (H₂O₂). The common methods for the detection of H₂O₂ include colorimetry, titration, chromatography, spectrophotometry, fluorimetry, and chemiluminescence. These methods commonly lack selectivity, sensitivity, and reproducibility and have prolonged analytical time. New biosensors are reported to circumvent these obstacles. The production of detectable amounts of H₂O₂ by cancerous cells has promoted the use of bio- and electrochemical sensors because of their high sensitivity, selectivity, robustness, and miniaturized point-of-care cancer diagnostics. Thus, this review will emphasize the principles, analytical parameters, advantages, and disadvantages of the latest electrochemical biosensors in the detection of H₂O₂. It will provide a summary of the latest technological advancements of biosensors based on potentiometric, impedimetric, amperometric, and voltammetric H₂O₂ detection. Moreover, it will critically describe the classification of biosensors based on the material, nature, conjugation, and carbon-nanocomposite electrodes for rapid and effective detection of H₂O₂, which can be useful in the early detection of cancerous cells.

Chemiluminescent magnetic nanoparticles with good catalytic activity and rapid separation capability and sensitive sensing for H2O2

It is of considerable importance to develop chemiluminescent functionalized nanomaterials (CF-NMs) with good catalytic activity, high chemiluminescence (CL) efficiency and good stability, and rapid magnetic separation capability, achieving excellent performance in CL biosensing. In this study, N-(4-aminobutyl)-N-ethylisoluminol (ABEI)-functionalized CuFe2O4 magnetic nanomaterial (ABEI/CuFe2O4) with high catalytic activity was synthesized by virtue of a solvothermal and post-functionalization method. ABEI/CuFe2O4 showed outstanding CL properties, superior to ABEI-CuFe2O4 in liquid phase. This reveals that the immobilization of ABEI on the surface of CuFe2O4 exhibits unique heterogeneous catalytic property. The catalytic ability of CuFe2O4 was better than that of CoFe2O4, ZnFe2O4, MnFe2O4, and NiFe2O4. It is suggested that the peroxide-like activity as well as Cu2+ and Cu0 enriched on the surface of ABEI/CuFe2O4 opened up a dual route for synergistic catalysis of H2O2. ABEI/CuFe2O4 also demonstrated good superparamagnetism and magnetic separation could be carried out in 2 min, which is advantageous for the separation and purification of ABEI/CuFe2O4 during the synthetic procedures and bioassays. Owing to the sensitive response of ABEI/CuFe2O4 to H2O2, an enzyme-free sensor was developed for the detection of H2O2 with a wide linear range over 5 orders of magnitude of H2O2 concentrations and a low detection limit of 5.6 nM. The as-developed sensor is sensitive, stable, and convenient. This work provides a new family member of nanomaterials with good magnetism and CL activity as well as good stability. The developed ABEI/CuFe2O4 shows great prospects in biocatalysis, bioassays, biosensing, and bioimaging, etc.

In Vitro and In Vivo Electrochemical Measurement of Reactive Oxygen Species After Treatment with Anticancer Drugs

In vivo monitoring of reactive oxygen species (ROS) in tumors during treatment with anticancer therapy is important for understanding the mechanism of action and in the design of new anticancer drugs. In this work, a platinized nanoelectrode is placed into a single cell for detection of the ROS signal, and drug-induced ROS production is then recorded. The main advantages of this method are the short incubation time with the drug and its high sensitivity which allows the detection of low intracellular ROS concentrations. We have shown that our new method can measure the ROS response to chemotherapy in tumor-bearing mice in real-time. ROS levels were measured in vivo inside the tumor at different depths in response to doxorubicin. This work provides an effective new approach for the measurement of intracellular ROS by platinized nanoelectrodes.

A smartphone-based biomedical sensory system

Disease diagnostics, food safety monitoring and environmental quality monitoring are the key means to safeguard human health. However, conventional detection devices for health care are costly, bulky and complex, restricting their applications in resource-limited areas of the world. With the rapid development of biosensors and the popularization of smartphones, smartphone-based sensing systems have emerged as novel detection devices that combine the sensitivity of biosensors and diverse functions of smartphones to provide a rapid, low-cost and convenient detection method. In these systems, a smartphone is used as a microscope to observe and count cells, as a camera to record fluorescence images, as an analytical platform to analyze experimental data, and as an effective tool to connect detection devices and online doctors. These systems are widely used for cell analysis, biochemical analysis, immunoassays, and molecular diagnosis, which are applied in the fields of disease diagnostics, food safety monitoring and environmental quality monitoring. Therefore, we discuss four types of smartphone-based sensing systems in this review paper, specifically in terms of the structure, performance and efficiency of these systems. Finally, we give some suggestions for improvement and future prospective trends.

Nanoelectrochemical biosensors for monitoring ROS in cancer cells

A novel strategy has been constructed based on a SiC@C nanowire electrode for intracellular electrochemical analysis to monitor ROS levels in cancer or tumor cells.