A simple, highly sensitive colorimetric immunosensor for the detection of alternariol monomethyl ether in fruit by non-aggregated gold nanoparticles

Time-resolved Fluorescence DNA-based Sensors for Reducing Background Fluorescence of Environment

The fluorescence assay is one of the popular methods that is applied for detection of different targets. However, this method may show low sensitivity and high background in biological samples due to the natural fluorescence of different compounds in complicated samples. In addition, it inevitably affects the detection results accuracy. A fundamental solution to this problem is the use of the time-resolved fluorescence technique (TRF). The main component of this technique is the use of long fluorescence lifetime reagents. In this review, various time-resolved fluorescent reagents such as complexes of lanthanide ions, lanthanide-doped inorganic nanoparticles; Mn-doped ZnS quantum dots (QDs) and pyrene excimer are introduced. Moreover, TRF sensors, especially TRF aptasensors (DNA-based sensors) are discussed. This review will give new ideas for researchers to develop novel high-sensitive TRF sensors that can remove or decrease background fluorescence and use them for the detection of various targets in complicated samples without treatment.

Sandwich-Based Immunosensor for Dual-Mode Detection of Pathogenic F17-Positive Escherichia coli Strains

Bacterial diseases cause tremendous economic losses due to high morbidity and mortality in livestock animals. F17A protein, the major subunit of F17 fimbriae, is one of the most prevalent and crucial virulence factors among the pathogenic Escherichia coli (E. coli) isolated from diarrheic and septicemic animals of various species. Purification and detection of this protein is regarded as an interesting field of investigation due to its important role as a therapeutic target, such as vaccines, and as a diagnostic tool. In this context, polyclonal rabbit antibodies recognizing F17A protein (anti−F17A antibody) were developed and used for its detection. In fact, sandwich biosensor using anti−F17A/gold nanoparticles conjugates as capture probe and anti−F17A antibody labelled with horseradish peroxidase as signal amplification probe was developed for electrochemical and fluorescent detection of purified F17A protein and live F17–positive E. coli bacteria. Good specificity and sensitivity for detection of F17–positive E. coli strains were obtained. The dynamic range for the biosensor varies from 1 × 10² to 1 × 10⁹ CFU·mL⁻¹ (R² = 0.998) and the detection limit (LOD) and the IC₅₀ value were estimated to be 37 CFU·mL⁻¹ and 75 CFU·mL⁻¹, respectively.

A novel turn-off fluorescent aptasensor for ampicillin detection based on perylenetetracarboxylic acid diimide and gold nanoparticles

Herein, a novel turn-off fluorescent aptasensor was developed for selective detection of ampicillin (AMP) at picomolar level based on 3,4,9,10-perylenetetracarboxylic acid diimide (PTCDI) as an affordable and low-cost fluorophore. This aptasensor was designed using aptamer, its complementary strand (CS) and gold nanoparticles (AuNPs). The principle of the sensing method is a decrease in the fluorescence intensity of PTCDI in the presence of free CS. Following the addition of AMP, Aptamer/CS-modified AuNPs releases CS and so, the fluorescence intensity of PTCDI is reduced. The designed analytical method indicated a good linear range from 100 pM to 1000 pM and a limit of detection (LOD) of 29.2 pM was obtained. Furthermore, the sensing strategy indicated satisfactory results for the detection of AMP in the spiked human serum samples. By changing the sequences of aptamer and its CS, the presented analytical approach can be easily applied for detection of other antibiotics.

Developments in mycotoxin analysis: an update for 2018-19

This review summarises developments on the analysis of various matrices for mycotoxins that have been published in the period from mid-2018 to mid-2019. Analytical methods to determine aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxins, patulin, trichothecenes, and zearalenone are covered in individual sections. Advances in sampling strategies are also discussed in a dedicated section. In addition, developments in multi-mycotoxin methods – including comprehensive mass spectrometric-based methods as well as simple immunoassays – are also reviewed. This critical review aims to briefly present the most important recent developments and trends in mycotoxin determination as well as to address limitations of the presented methodologies.

A microfluidic colorimetric immunoassay for sensitive detection of altenariol monomethyl ether by UV spectroscopy and smart phone imaging

A novel microfluidic colorimetric immunoassay was developed using gold nanoparticles (GNPs) for indicating different concentrations of altenariol monomethyl ether (AME), and UV spectroscopy and smart phone imaging for monitoring color change of the GNPs. Norland Optical Adhesive 81 (NOA 81) was used for simple and rapid fabrication of the microfluidic chip. AME-BSA modified magnetic nanoparticles (MNPs-BSA-AME) were used as capture probe and the self-magnetism for rapid separation and purification. AME monoclonal antibodies modified gold nanoparticles (GNP-mAbs) which dried on conjugate pad were used as detection probe and the self-catalyst for signal amplification. Under the optimal conditions, the proposed microfluidic colorimetric immunoassay was able to detect AME as low as 12.5 pg/mL for UV spectroscopy (574 nm), and 200 pg/mL for smart phone imaging. The total analysis time is less than 15 min. The immunoassay also has a lower cross-reactivity to AME analogues. It was also evaluated by analyzing fruit samples spiked with AME. The recoveries ranged from 91.19% to 94.15% for UV spectroscopy, and from 90.63% to 93.9% for smart phone imaging. This method can be used for rapid, sensitive, low-cost and portable point-of care testing (POCT) of other mycotoxins or haptens in food samples.

A magnetic nanoparticle based immunoassay for alternariol monomethyl ether using hydrogen peroxide-mediated fluorescence quenching of CdTe quantum dots

The authors describe a fluorometric immunoassay for alternariol monomethyl ether (AME). It is making use of magnetic nanoparticles and quenching of the fluorescence of mercaptopropionic acid-capped CdTe quantum dots (MPA-CdTe QDs) by H₂O₂. Catalase (CAT) was labeled with AME as a competitive antigen to competitively bind to magnetic nanoparticles carrying monoclonal antibodies (mAbs) with free AME in samples. The effects of the concentration and pH value of buffer, the concentrations of H₂O₂ and CAT-AME, and the incubation time of H₂O₂ and MPA-CdTe QDs were optimized. Under optimal conditions and in combination with magnetic separation, the quenching of the fluorescence of the MPA-CdTe QDs (excitation at 310 nm, emission at 599 nm) can be used to quantify AME with a detection limit of 0.25 pg·mL^-1 and the linear range from 0.25 to 7.5 pg·mL^-1. The immunoassay also has a lower cross-reactivity to AME analogues. It was evaluated by analyzing fruit samples spiked with AME. The recoveries from spiked fruits ranged from 87.2% to 92.0%. Graphical abstract Schematic presentation of a fluorometric immunoassay for alternariol monomethyl ether (AME) using magnetic nanoparticles (MNPs) for the rapid separation and purification. The method is based on quenching of the fluorescence of mercaptopropionic acid-capped CdTe quantum dots (MPA-CdTe QDs) by H₂O₂ for the fluorescence signal output, and on the use of catalase (CAT) with its high catalytic activity.

Noble Metal Nanoparticles Applications: Recent Trends in Food Control

Scientific research in the nanomaterials field is constantly evolving, making it possible to develop new materials and above all to find new applications. Therefore, nanoparticles (NPs) are suitable for different applications: nanomedicine, drug delivery, sensors, optoelectronics and food control. This review explores the recent trend in food control of using noble metallic nanoparticles as determination tools. Two major uses of NPs in food control have been found: the determination of contaminants and bioactive compounds. Applications were found for the determination of mycotoxins, pesticides, drug residues, allergens, probable carcinogenic compounds, bacteria, amino acids, gluten and antioxidants. The new developed methods are competitive for their use in food control, demonstrated by their validation and application to real samples.