Flexible photoelectrochemical sensor for highly sensitive chloramphenicol detection based on M-TiO2-CdTe QDs/CdS QDs composite

A signal-switchable photoelectrochemical biosensor for ultrasensitive detection of long non-coding RNA in cancer cells

Long non-coding RNA (LncRNA) as an emerging tumor biomarker plays a key factor in the early diagnosis of cancer. Herein, an innovative signal-switchable photoelectrochemical (PEC) biosensor based on ZrO2@CuO bimetallic oxides and T7 Exo-assisted signal amplification is reported for the ultrasensitive and selective detection of lncRNA (HOX gene antisense intergenic RNA, HOTAIR) in cancer cells. Firstly, MOFs-derived TiO2 nanodisks as an excellent photoactive material show an anodic background signal. When target lncRNA exists, the abundant auxiliary DNA1 is freed from T7 Exo-assisted cycle signal amplification, and then competitively hybridizes with auxiliary DNA2 on the electrode. Subsequently, bimetallic MOFs-derived ZrO2@CuO octahedra with a high specific surface area and porous structure are introduced into TiO2 nanodisks-modified biosensor, which appears a cathodic photocurrent and achieves a switchable signal. The developed signal-switchable PEC biosensor shows ultrasensitive detection of lncRNA HOTAIR with a detection limit of 0.12 fM, and can eliminate the false interference. Importantly, the established PEC biosensor has good correlation with RT-qPCR analysis (P < 0.05) for the quantification of lncRNA HOTAIR in cancer cells, which has great potential application for biomarker detection in the early diagnosis of cancer.

Efficient sensitization of CdTe QDs towards PTCDA for sensitive photoelectrochemical Hg2+ assay

Herein, a sensitive photoelectrochemical (PEC) biosensor was designed for the detection of mercury ions (Hg2+) on the basis of the efficient sensitization of cadmium telluride quantum dots (CdTe QDs) towards 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) and the significant quenching ability of a thymine-Hg2+-thymine (T-Hg2+-T) structure. The proposed CdTe QD/PTCDA sensitized structure was successfully constructed via continuous incubation of PTCDA and CdTe QDs on the glassy carbon electrode (GCE) interface, which embraced strong light absorption capacity and high carrier separation efficiency, giving rise to a remarkably improved initial photocurrent response. Notably, the PEC signal generated from the CdTe QD/PTCDA sensitized structure was almost fivefold higher than that of PTCDA owing to the efficient sensitization of CdTe QDs towards PTCDA. Once target Hg2+ ions were added, a T-rich S1 strand modified on the surface of 1-hexanethiol (HT)/S1/gold nanoparticles (Au NPs)/CdTe QDs/PTCDA/GCE immediately reacted with Hg2+ to produce multiple stable T-Hg2+-T structures. Therefore, the initial PEC signal would be considerably quenched by a high steric hindrance effect derived from the T-Hg2+-T structures. As a result, a quenched PEC response could achieve the detection of Hg2+ in concentrations ranging from 100 fM to 1000 nM. More importantly, the combination of the CdTe QDs/PTCDA sensitization structure and the T-Hg2+-T structure paves a promising pathway to developing a novel PEC biosensing platform for Hg2+ detection and also provides a favorable strategy for monitoring environmental pollution related to Hg2+.

Fluorescent-Nanoparticle-Impregnated Nanocomposite Polymeric Gels for Biosensing and Drug Delivery Applications

Nanocomposite polymeric gels infused with fluorescent nanoparticles have surfaced as a propitious category of substances for biomedical purposes owing to their exceptional characteristics. The aforementioned materials possess a blend of desirable characteristics, including biocompatibility, biodegradability, drug encapsulation, controlled release capabilities, and optical properties that are conducive to imaging and tracking. This paper presents a comprehensive analysis of the synthesis and characterization of fluorescent-nanoparticle-impregnated nanocomposite polymeric gels, as well as their biomedical applications, such as drug delivery, imaging, and tissue engineering. In this discourse, we deliberate upon the merits and obstacles linked to these substances, encompassing biocompatibility, drug encapsulation, optical characteristics, and scalability. The present study aims to provide an overall evaluation of the potential of fluorescent-nanoparticle-impregnated nanocomposite polymeric gels for biomedical applications. Additionally, emerging trends and future directions for research in this area are highlighted.

Detection of enrofloxacin residues in dairy products based on their fluorescence quenching effect on AgInS2 QDs

Water-soluble AgInS₂ (AIS) quantum dots (QDs) were successfully prepared through the one-pot water phase method with thioglycolic acid (TGA) as the stabilizing agent. Because enrofloxacin (ENR) effectively quenches the fluorescence of AIS QDs, a highly-sensitive fluorescence detection method is proposed to detect ENR residues in milk. Under optimal detection conditions, there was a good linear relationship between the relative fluorescence quenching amount (ΔF/F₀) of AgInS₂ with ENR and ENR concentration (C). The detection range was 0.3125-20.00 μg/mL, r = 0.9964, and the detection limit (LOD) was 0.024 μg/mL (n = 11). The average recovery of ENR in milk ranged from 95.43 to 114.28%. The method established in this study has advantages including a high sensitivity, a low detection limit, simple operation and a low cost. The fluorescence quenching mechanism of AIS QDs with ENR was discussed and the dynamic quenching mechanism of light-induced electron transfer was proposed.

Colorimetric Sensors for Chemical and Biological Sensing Applications

Colorimetric sensors have been widely used to detect numerous analytes due to their cost-effectiveness, high sensitivity and specificity, and clear visibility, even with the naked eye. In recent years, the emergence of advanced nanomaterials has greatly improved the development of colorimetric sensors. This review focuses on the recent (from the years 2015 to 2022) advances in the design, fabrication, and applications of colorimetric sensors. First, the classification and sensing mechanisms of colorimetric sensors are briefly described, and the design of colorimetric sensors based on several typical nanomaterials, including graphene and its derivatives, metal and metal oxide nanoparticles, DNA nanomaterials, quantum dots, and some other materials are discussed. Then the applications, especially for the detection of metallic and non-metallic ions, proteins, small molecules, gas, virus and bacteria, and DNA/RNA are summarized. Finally, the remaining challenges and future trends in the development of colorimetric sensors are also discussed.

A Sensitive Photoelectrochemical Sensor for Levodopa Detection Using Benzothiadiazole-Based Conjugated Microporous Polymer-Coated Graphene Heterostructures

Since the 1960s, levodopa (LDA) has been the standard drug for treating of Parkinson's disease. In this study, a novel benzothiadiazole-based conjugated microporous polymer-coated graphene heterostructure (CMP-rGO) was synthesized and used to construct a sensitive photoelectrochemical (PEC) sensor capable of detecting LDA. Under optimal experimental conditions, the intensity of the photocurrent produced by the sensor was linear from 0.005 to 40 μM, and the limit of detection of the sensor was 0.0027 μM. The sensor showed good repeatability, stability, and selectivity for LDA detection. Finally, the constructed sensor was used to detect LDA in levodopa tablets, human serum samples, and urine samples and satisfactory results were obtained. Therefore, the PEC sensor provides a novel platform for the detection of LDA in real samples and broadens the applications of conjugated microporous polymers in PEC sensing.

Highly Sensitive Determination of Antibiotic Residues in Aquatic Products by High-Performance Liquid Chromatography-Tandem Mass Spectrometry

Antibiotic drug residues are crucial to ensure food safety and minimize risk to human health. Herein, a sensitive high-performance liquid chromatography−tandem mass spectrometry (HPLC−MS/MS) method was developed and validated for the determination of antibiotic residues (mainly amphenicols) consisting of chloramphenicol (CAP), thiamphenicol (TAP), florfenicol (FF), and florfenicol amine (FFA) in aquatic products. Amphenicols were well separated on a Kinetex F5 (100 mm × 3.0 mm, 2.6 µm) chromatographic column with the mobile phases of 1 mM ammonium acetate aqueous solution and methanol solution and measured after positive and negative electrospray ionizations using four internal standards. To our knowledge, it was the first time to report the good performance of F5 column and four internal standards for the determination of amphenicols. The established method featured a good linear relationship between chromatographic peak area ratios and the concentrations of amphenicols (R2 > 0.992), a wide and low detection matrix-based range of 0.01−5 μg/L, a low detection limit of 0.01 μg/kg, etc. The spiked assays evidenced the accuracy and reliability of the developed method with the recoveries between 84.0 and 105%, the intraday relative standard deviations (RSDs) over the range of 0.769−13.7%, and the interday RSDs over the range of 0.582−13.3%. Finally, the proposed method was applied to investigate amphenicol residues in various aquatic products, including fish, shrimp, crab, shellfish, and other aquatic species.

Molecular Imprinted ZnS Quantum Dots-Based Sensor for Selective Sulfanilamide Detection

Combining molecular imprinted polymers and water-soluble manganese-doped zinc sulfide quantum dots (Mn²⁺: ZnS QDs), a new molecule imprinted polymers-based fluorescence sensor was designed. The molecule imprinted quantum dots (MIP@QDs) were constructed by coating molecular imprinted polymers layer on the surface of ZnS: Mn²⁺ QDs using the surface molecular imprinting technology. The developed MIP@QDs-based sensor was used for rapid and selective fluorescence sensing of sulfanilamide in water samples. The binding experiments showed that the MIP@QDs has rapid fluorescent responses, which are highly selective of and sensitive to the detection of sulfanilamide. The respond time of the MIP@QDs was 5 min, and the imprinting factor was 14.8. Under optimal conditions, the developed MIP@QDs-based sensor shows a good linearity (R² = 0.9916) over a sulfanilamide concentration range from 2.90 × 10⁻⁸ to 2.90 × 10⁻⁶ mol L⁻¹, with a detection limit of 3.23 × 10⁻⁹ mol L⁻¹. Furthermore, the proposed MIP@QDs-based sensor was applied to the determination of sulfanilamide in real samples, with recoveries of 96.80%–104.33%, exhibiting good recyclability and stability. Experimental results showed that the prepared MIP@QDs has the potential to serve as a selective and sensitive sensor for the fluorescence sensing of sulfonamides in water samples.

Molecular Imprinted Poly(2,5-benzimidazole)-Modified VO2-CuWO4 Homotype Heterojunction for Photoelectrochemical Dopamine Sensing

A photoactive molecularly imprinted poly(2,5-benzimidazole)-modified vanadium dioxide-cupric tungstate (VO₂-CuWO₄) as an efficient photosensitive n-n type-II heterojunction thin film was electrochemically deposited on Ti substrate for the selective and robust photoelectrochemical (PEC) bioanalysis of dopamine (DA). The optical absorption of n-VO₂/n-CuWO₄ type-II heterojunction was capably broadened toward the visible region, which permitted superior light-harvesting and robust carriers generation, separation, and transfer processes significantly enhancing the anodic photocurrent, as confirmed by a series of PEC analyses. Findings revealed that the as-prepared label-free MIP-PEC sensor can quantitatively monitor DA in a linear range of 1 nM to 200 μM with a detection limit of 0.15 nM. This MIP-PEC sensor showed robust selectivity under conditions with high concentrations of interfering substances, which can be recovered in the real samples of urine, cocoa chocolate, and diluted yogurt, indicating its promising potential applications in biological and food samples. This work not only featured the use of photoelectrically active MIP/VO₂-CuWO₄ for PEC detection of DA, but also provided a new horizon for the design and implementation of functional polymers/metal oxides heterojunction materials in the field of PEC sensors and biosensors.