A simple and rapid visual method for the determination of ammonia nitrogen in environmental waters using thymol

Selective and trace determination of monochloramine in river water by chemical derivatization and liquid chromatography/tandem mass spectrometry analysis

Monochloramine (MCA) may enter the aquatic environment through three main sources: wastewater treatment plant effluents, industrial effluents and thermal power plant wastes. Up to date, there are no available data about the concentration levels of this chemical in river water due to lack of appropriate analytical methods. Therefore, sensitive and selective analytical methods for monochloramine analysis in river water are required to evaluate its environmental fate and its effects on aquatic ecosystems. Thus, in this study we describe a highly specific and sensitive method for monochloramine determination in river water. This method combines chemical derivatization of monochloramine into indophenol followed by liquid chromatography coupled to electrospray ionisation-tandem mass spectrometry (LC-ESI-MS/MS) analysis. Two precursor-to-product ion transitions were monitored (200→127 and 200→154) in positive ionisation mode, fulfilling the criteria of selectivity, in accordance with the European Legislation requirements (decision 2002/657/EC). Ion structures and fragmentation mechanisms have been proposed to explain the selected transitions. Linearity range, accuracy and precision of the method have been assessed according to the French method validation standard NF T90-210. Detecting the derivatized monochloramine (indophenol) in Multiple Reaction Monitoring (MRM) mode provided a limit of quantification of 40 ng L(-1) equivalent monochloramine. Applied to Loire river water (France), the developed method occasionally detected monochloramine at concentrations less than 300 ng L(-1), which could be explained by punctual discharges of water containing active chlorine upstream of the sampling point. Indeed, it is widely reported in the literature that the addition of chlorine to water containing ammonia (e.g., wastewater effluents and river water) may result in the instantaneous formation of monochloramine. The proposed method is a powerful tool that can be used in environmental research (e.g., assessment of environmental fate and generating of ecotoxicological data) as well as in research studies concerning the evaluation of water disinfection efficiency; but it is not currently appropriate for routine use in industrial applications given the complexity of the procedure, the instability of indophenol and the use of certain toxic reagents.

Pilot-scale process development and scale up for antifungal production

A pilot-scale fermentation was developed for an antifungal compound produced by a filamentous fungus. Replacement of galactose with lactose (20-fold cost savings) and a threefold phosphate reduction (15 to 5 g/L) improved productivity 2.5-fold. Addition of supplements--glycine, cobalt chloride, and trace elements--resulted in a further twofold productivity increase, greater process robustness, and less foaming which reduced antifoam addition tenfold (30 to <3 mL/L). Mid-cycle lactose limitations were addressed by raising initial lactose levels (40 to 120 g/L) resulting in another twofold productivity increase. Overall, peak titers increased tenfold from 45 +/- 9 to 448 +/- 39 mg/L, and productivities improved from 3 to 25 mg/L day. Despite its high productivity, process scale up was challenged by high broth viscosity (5,000-6,000 cP at 16.8 s(-1)). Gassed power requirements at the 600 L scale (4.7 kW/1,000 L) exceeded available power at the 15,000 L scale (3.0 kW/1,000 L), and broth transfer to the downstream isolation facility was hindered. Mid-cycle broth dilution with up to five 10 vol% additions of 12 wt% lactose solution or whole medium-reduced viscosity three- to fivefold (1,000-1,500 cP at 16.8 s(-1)), gassed power within scale-up limits (2.5 kW/1,000 L), and peak titer by up to 45%. The process was scaled up to the 15,000 L working volume based on constant aeration rate (vvm) and peak impeller tip speed, raising superficial velocities at similar shear. This strategy maximized mass transfer rates at target gassed power per unit volume levels, and along with controlled broth viscosity, precluded multiple dilution additions. A final titer of 333 mg/L with one dilution addition was achieved, somewhat lower than expected, likely owing to inhibition from some unmeasured volatile compound (not believed to be carbon dioxide) during an extended period of high back-pressure in the early production phase.

A Simple and Rapid in situ Preconcentration Method for Trace Ammonia Nitrogen in Environmental Water Samples Using a Solid-Phase Extraction Followed by Spectrophotometric Determination

A simple and rapid in situ preconcentration method for the spectrophotometric determination of trace ammonia nitrogen in environmental water samples has been developed based on solid-phase extraction using a small column packed with octadecyl group-bonded silica gel (Sep-Pak C18 cartridge). A water sample was taken into a graduated syringe for easy and simple operation and prevention of contamination immediately after sample collection. Ammonia in the sample was reacted with hypochlorite and thymol to be converted into indothymol blue; then the formed indothymol blue was collected as an ion pair between indothymol blue and tetrabutylammonium ion on a Sep-Pak C18 cartridge. The indothymol blue on the cartridge was stable for 4 days. The retained indothymol blue was easily eluted with a mixture of methanol and 0.01 mol/l sodium hydroxide solution. The color intensity due to the indothymol blue was spectrophotometrically measured at 725 nm. The proposed method was successfully applied to environmental water samples such as river water.