Modulation of the thermal stability of β-lactoglobulin by transglutaminase treatment

Improvement of enzymatic cross-linking of ovalbumin and ovotransferrin induced by transglutaminase with heat and reducing agent pretreatment

The effects of transglutaminase (TGase, 1.0 unit/mL) with heat (95 °C, 5 min), 2-mercaptoethanol (2-ME, 0.83 %), and l-cysteine (l-Cys, 50 mM) pretreatment on the cross-linking of ovalbumin (OVA) and ovotransferrin (OVT) were investigated. SDS-PAGE revealed that although the polymerization of OVA and OVT did not occur after 3 h of incubation at 40 °C with TGase, OVA polymerized into high molecular weight polymers following TGase with 2-ME and heat pretreatment after 3 h of incubation. The surface hydrophobicity and reactive sulfhydryl (SH) groups of OVA samples significantly increased from 4065.7 ± 136.7 and 89.3 ± 1.2 SH groups (μmol/g) to 31483.6 ± 342.7 and 119.5 ± 3.7 SH groups (μmol/g), respectively. Similar results were obtained for OVT with TGase and l-Cys pretreatment and a 3-h incubation at 40 °C. The use of TGase, a reducing agent, and/or heat pretreatment can be used for the polymerization of OVA and OVT.

Unaided efficient transglutaminase cross-linking of whey proteins strongly impacts the formation and structure of protein alginate particles

•

Microbial transglutaminase (MTG) cross-linked >70% β-lactoglobulin (β-Lg) at pH 8.5.

•

Initial MTG catalyzed isopeptide bond formation caused partial unfolding of β-Lg.

•

>75% of whey protein cross-linked, forming hetero-polymers containing β-Lg.

•

50% less alginate is needed to form particles with cross-linked than with native β-Lg.

•

Cross-linked β-Lg and alginate formed suspendable hydrophobically driven particles.

There is a dogma within whey protein modification, which dictates the necessity of pretreatment to enzymatic cross-linking of β-lactoglobulin (β-Lg). Here microbial transglutaminase (MTG) cross-linked whey proteins and β-Lg effectively in 50 mM NaHCO₃, pH 8.5, without pretreatment. Cross-linked β-Lg spanned 18 to >240 kDa, where 6 of 9 glutamines reacted with 8 of 15 lysines. The initial isopeptide bond formation caused loss of β-Lg native structure with t_1/2 = 3 h, while the polymerization occurred with t_1/2 = 10 h. Further, cross-linking effects on protein carbohydrate interaction have been overlooked, leaving a gap in understanding of these complex food matrices. Complexation with alginate showed that β-Lg cross-linking decreased onset of particle formation, hydrodynamic diameter, stoichiometry (β-Lg/alginate) and dissociation constant. The complexation was favored at higher temperatures (40 °C), suggesting that hydrophobic interactions were important. Thus, β-Lg was cross-linked without pretreatment and the resulting polymers gave rise to altered complexation with alginate.

Ultrasound-Assisted Transglutaminase Catalysis of the Cross-Linking and Microstructure of αs-Casein, β-Casein and κ-Casein

The effects of ultrasonic treatment (UT)-assisted transglutaminase (TGase) catalysis on the physicochemical properties of individual αs-casein (αs-CN), β-casein (β-CN), and κ-casein (κ-CN) were investigated. After 60 min of incubation at 30 °C, αs-CN, β-CN, and κ-CN were cross-linked with TGase (6.0 units/mL), and high molecular weight polymers (>200 kDa) were formed. The use of TGase in conjunction with UT (20 kHz, power of 400 W, and amplitude 20%) led to an increase in the rate of αs-CN, β-CN, and κ-CN polymerization compared to the individual casein that contained TGase but did not undergo UT. SDS-PAGE scrutiny showed that the intensities of αs-CN, β-CN, and κ-CN incubation with regard to TGase and UT at 30 °C for 60 min noticeably decreased to 5.66 ± 0.39, 3.97 ± 0.43, and 26.07 ± 1.18%, respectively (p < 0.05). Particle size analysis results indicated that the molecule size appropriation for the cross-linking of αs-CN, β-CN, and κ-CN ranged from 6000 to 10,000 nm after 60 min incubation with TGase and UT. Transmission electron microscopy investigation showed network structures of cross-linking αs-CN, β-CN, and κ-CN were formed from αs-CN, β-CN, and κ-CN, respectively. As our results show, the comprehensive utilization of TGase and UT will be a superior method for the polymerization of αs-CN, β-CN, and κ-CN.

Influence of Microbial Transglutaminase on Physicochemical and Cross-Linking Characteristics of Individual Caseins

The effects of microbial transglutaminase (MTGase) cross-linking on the physicochemical characteristics of individual caseins were investigated. MTGase was used to modify three major individual caseins, namely, κ-casein (κ-CN), α_S-casein (α_S-CN) and β-casein (β-CN). The SDS-PAGE analysis revealed that MTGase-induced cross-linking occurred during the reaction and that some components with high molecular weights (>130 kDa) were formed from the individual proteins κ-CN, α_S-CN and β-CN. Scanning electron microscopy (SEM) and particle size analysis respectively demonstrated that the κ-CN, α_S-CN and β-CN particle diameters and protein microstructures were larger and polymerized after MTGase cross-linking. The polymerized κ-CN (~749.9 nm) was smaller than that of β-CN (~7909.3 nm) and α_S-CN (~7909.3 nm). The enzyme kinetics results showed K_M values of 3.04 × 10⁻⁶, 2.37 × 10⁻⁴ and 8.90 × 10⁻³ M for κ-CN, α_S-CN and β-CN, respectively, and, furthermore, k_cat values of 5.17 × 10⁻⁴, 1.92 × 10⁻³ and 4.76 × 10⁻² 1/s, for κ-CN, α_S-CN and β-CN, respectively. Our results revealed that the cross-linking of β-CN catalyzed by MTGase was faster than that of α_S-CN or κ-CN. Overall, the polymers that formed in the individual caseins in the presence of MTGase presented a higher molecular weight and larger particles.

Transglutaminase Applications in Dairy Technology

Consumers' expectations from a dairy product have changed dramatically during the last two decades. People are now more eager to purchase more nutritious dairy foods with improved sensory characteristics. Dairy industry has made many efforts to meet such expectations and numerious production strategies and alternatives have been developed over the years including non-thermal processing, membrane applications, enzymatic modifications of milk components, and so on. Among these novel approaches, transglutaminase (TG)-mediated modifications of milk proteins have become fairly popular and such modifications in dairy proteins offer many advantages to the dairy industry. Since late 1980s, a great number of researches have been done on TG applications in milk and dairy products. Especially, milk proteins-based edible films and gels from milk treated with TG have found many application fields at industrial level. This chapter reviews the characteristics of microbial-origin TG as well as its mode of action and recent developments in TG applications in dairy technology.

Nanoscale understanding of thermal aggregation of whey protein pretreated by transglutaminase

Nanoscale structures of whey protein isolate (WPI) pretreated by microbial transglutaminase (mTGase) and subsequent heating were studied in this work and were correlated to zeta-potential, surface hydrophobicity, thermal denaturation properties, and macroscopic turbidity and viscosity. Dispersions of 5% w/v WPI were pretreated by individual or sequential steps of preheating at 80 °C for 15 min and mTGase, used at 2.0-10.2 U/g WPI for 1-15 h, before adjustment of the pH to 7.0 and to 0-100 mM NaCl for heating at 80 °C for 15 and 90 min. The zeta potential and surface hydrophobicity of WPI increased after all pretreatment steps. Preheating increased cross-linking reactivity of WPI by mTGase, corresponding to significantly increased denaturation temperature. Particle size analysis and atomic force microscopy revealed that structures of sequentially pretreated WPI remained stable after heating at 100 mM NaCl, corresponding to transparent dispersions. Conversely, WPI pretreated by one step aggregated at only 100 mM NaCl and resulted in turbid dispersions. Besides reporting a practical approach to produce transparent beverages, nanoscale phenomena in the present study are important for understanding whey protein structures in relevant applications.

pH-stability and thermal properties of microbial transglutaminase-treated whey protein isolate

Whey protein isolate (WPI) was treated to various extents using microbial transglutaminase (MTGase) and changes in pH-stability and thermal stability of its protein components were investigated. The MTGase treatment significantly increased the denaturation temperature (T(d)) of beta-lactoglobulin in WPI, from 71.84 degrees C in the untreated sample to 78.50 degrees C after 30 h of incubation with MTGase. The enthalpy change of denaturation of WPI did not change upon cross-linking, indicating that the increase in T(d) was primarily due to covalent cross-linking and not due to an increase in nonpolar interactions within the protein. The surface hydrophobicity (S(o)) of the protein decreased upon cross-linking; however, this decrease was not due to burial of the surface hydrophobic cavities in the protein interior, but due to occlusion of the hydrophobic cavities to the fluorescent probes. Fluorescence emission and circular dichroism spectroscopic analyses revealed no major changes in the secondary and tertiary conformations as a result of cross-linking. However, unlike native WPI, the cross-linked protein exhibited a U-shaped pH-stability profile with maximum turbidity at pH 4.0-4.5. The study revealed that even though enzymatic cross-linking significantly improved the T(d) of beta-lactoglobulin in WPI without causing major structural changes, a reduction in the hydrophilic-hydrophobic balance of the protein surface as a result of elimination of the positive charge on lysyl residues caused precipitation at pH 4.0-4.5.