Effect of fluoride pretreatment on the solubility of synthetic carbonated apatite

CAM Model: Intriguing Natural Bioreactor for Sustainable Research and Reliable/Versatile Testing

We are witnessing the revival of the CAM model, which has already used been in the past by several researchers studying angiogenesis and anti-cancer drugs and now offers a refined model to fill, in the translational meaning, the gap between in vitro and in vivo studies. It can be used for a wide range of purposes, from testing cytotoxicity, pharmacokinetics, tumorigenesis, and invasion to the action mechanisms of molecules and validation of new materials from tissue engineering research. The CAM model is easy to use, with a fast outcome, and makes experimental research more sustainable since it allows us to replace, reduce, and refine pre-clinical experimentation ("3Rs" rules). This review aims to highlight some unique potential that the CAM-assay presents; in particular, the authors intend to use the CAM model in the future to verify, in a microenvironment comparable to in vivo conditions, albeit simplified, the angiogenic ability of functionalized 3D constructs to be used in regenerative medicine strategies in the recovery of skeletal injuries of critical size (CSD) that do not repair spontaneously. For this purpose, organotypic cultures will be planned on several CAMs set up in temporal sequences, and a sort of organ model for assessing CSD will be utilized in the CAM bioreactor rather than in vivo.

Bioactive Composite for Orbital Floor Repair and Regeneration

In the maxillofacial area, specifically the orbital floor, injuries can cause bone deformities in the head and face that are difficult to repair or regenerate. Treatment methodologies include use of polymers, metal, ceramics on their own and in combinations mainly for repair purposes, but little attention has been paid to identify suitable materials for orbital floor regeneration. Polyurethane (PU) and hydroxyapatite (HA) micro- or nano- sized with different percentages (25%, 40% & 60%) were used to fabricate bioactive tissue engineering (TE) scaffolds using solvent casting and particulate leaching methods. Mechanical and physical characterisation of TE scaffolds was investigated by tensile tests and SEM respectively. Chemical and structural properties of PU and PU/HA scaffolds were evaluated by infrared (IR) spectroscopy and Surface properties of the bioactive scaffold were analysed using attenuated total reflectance (ATR) sampling accessory coupled with IR. Cell viability, collagen formed, VEGF protein amount and vascularisation of bioactive TE scaffold were studied. IR characterisation confirmed the integration of HA in composite scaffolds, while ATR confirmed the significant amount of HA present at the top surface of the scaffold, which was a primary objective. The SEM images confirmed the pores' interconnectivity. Increasing the content of HA up to 40% led to an improvement in mechanical properties, and the incorporation of nano-HA was more promising than that of micro-HA. Cell viability assays (using MG63) confirmed biocompatibility and CAM assays confirmed vascularization, demonstrating that HA enhances vascularization. These properties make the resulting biomaterials very useful for orbital floor repair and regeneration.

Quantitative determination of lattice fluoride effects on the solubility and crystallinity of carbonated apatites with incorporated fluoride

The purpose of this study was to evaluate quantitatively the effects of fluoride on the solubility and crystallinity of carbonated apatites (CAPs) after its incorporation into the crystal lattice using the metastable equilibrium solubility (MES) distribution method. Fluoride-incorporated CAPs (F-CAPs) of two different carbonate levels (3 and 5%) and fluoride contents from 0 to 20,000 µg/g were synthesized. X-ray diffraction experiments and Rietveld analysis were conducted to obtain crystallite microstrain and unit cell parameters. Acetate buffer MES solution media were prepared at two solution fluoride concentrations (0.2 and 2.0 mg/l) and at two pHs (5.0 and 5.7). The unit cell a-axis values of the F-CAPs were found to decrease as the fluoride content increased, consistent with the fluoride being incorporated into the crystal lattice. The fluoride concentrations in the MES solution media were high enough to provide a 'swamping' effect such that the fluoride released from the F-CAPs during dissolution was minimal in changing the solution fluoride concentration. Employing the MES distribution superposition method, it was shown that the surface complex possessing the fluorapatite (FAP) stoichiometry [Ca10(PO4)6F2] accounted for the MES distribution behavior of all experiments. In addition, the mean pIFAP [the value of -log(aCa(10)aPO4(6)aF(2)) calculated from the ionic activity product based on FAP stoichiometry of the MES dissolution media in which 50% of the F-CAPs had dissolved] correlated well with the crystallite microstrain parameters of the F-CAPs. The incorporated fluoride in the F-CAPs showed only modest effects on F-CAP crystallinity and solubility.

Combined Effects of Nano-Hydroxyapatite and NaF on Remineralization of Early Caries Lesion

A previous study reported that many supplements have been added to NaF mouthrinses to improve the remineralization potential. Nano-hydroxyapatite (nano-HA) might also be suitable to this purpose because these nano-size particles can penetrate the enamel pores. Moreover, hydroxyapatite is similar to the inorganic component of teeth and is both bioactive and biocompatible. The aim of this study was to evaluate the combined effects of a nano-HA and fluoride mouthrinse on an early caries lesion in human enamel using an in vitro cycle remineralization and treatment model. Forty-eight human enamel specimens, which had a Vickers Hardness Number (VHN) of 25~45 were artificially demineralized for 48h. There were 8 treatment groups (0%, 1%, 5%, 10% nano-HA in distilled water and the same concentrations of nano-HA in a 0.05% NaF solution). The specimens were incubated in an in vitro remineralization model. After immersing the specimens into the treatment and remineralization solution for 12 hours each, the VHN of each specimen was evaluated for total 24 hours. This step was repeated once again for total 48 hours. The enamel surfaces of all specimens were examined by Confocal Laser Scanning Microscopy (CLSM) and SEM. The statistical significance of the data was identified by one-way ANOVA followed by a Duncan’s studentized range test. A p value < 0.05 was considered significant. The results showed that the degree of remineralization, as revealed by the VHN values, was higher in the NaF groups than in the distilled water groups. The VHNs of the remineralized enamel specimens for 48 hours were higher than after the 24 hours treatment. In addition, the level of remineralization increased with increasing concentration of nano-HA and was more pronounced in the NaF groups than the distilled water groups (p<0.05). The CLSM and SEM images nano-sized particles attached to the enamel in the nano-HA treated groups. Nano-HA might play a synergistic role in remineralization with a fluoride mouthrinse. However, more study will be needed to determine the optimal condition of nano-HA and NaF mouthrinse for human use. In conclusion, nano-HA in a 0.05% NaF mouthrinse can help remineralize an early caries lesion.

Effect of New Dentifrice Containing Nano-Sized Carbonated Apatite on Enamel Remineralization

The process of dental caries is dynamic and continuous, with periods of de- and remineralization of the tooth structure occurring over time. When the remineralization potential is superior to demineralization, the caries process can be stopped and early caries lesions can recover. Moreover, the remineralization potential will be increased if active components are added to a dentifrice. Therefore, the aim of this study was to re-evaluate the remineralizaton potential of a dentifrice containing nano-sized carbonated apatite using pH cycling, which simulates the oral environment. Artificial incipient caries was induced on bovine tooth specimens, which were treated with 4 dentifrices containing several concentrations of nano carbonated apatites with pH cycling. The remineralization effect was evaluated at each step by measuring the Vickers Hardness Number, and obtaining SEM and CLSM images of the enamel surface. The micro hardness of the enamel surface increased after the pH cycling treatment of the dentifrices. The dentifrice containing 5% n-CAPs showed the highest level of remineralization followed by 0%, 15% and 30%. One-way ANOVA indicated a significant difference in remineralization between the dentifrice containing 5% and 30% n-CAPs. SEM and CLSM also demonstrated observable differences in each step. From this study, the fluoride dentifrice containing 5% n-CAPs was effective in remineralizing an artificial incipient caries lesion. In conclusion, the dentifrice containing 5% nano carbonated apatites and 25% silica was the most effective in remineralizing early caries lesion.

Apparent solubility distributions of hydroxyapatite and enamel apatite

Samples of human dental enamel and hydroxyapatite were equilibrated at 5 mg/40 ml for 9 days at 37 degrees C with acetate buffers adjusted to a range of saturations with respect to hydroxyapatite. Sigmoidal apparent solubility distributions, in which the fraction dissolved was plotted against--log(ion activity product for hydroxyapatite) (pIHA), were constructed. About 10% of the hydroxyapatite and 14% of the enamel was very soluble, dissolving even at pIHA 55. The apparent solubility distributions for both solids were invariant with pH (4.5, 5.0, 5.5), within experimental error, showing that solubility was controlled by a phase with the stoichiometry of hydroxyapatite, probably in the form of a surface layer or complex on the crystals, in agreement with other studies on carbonate-apatites and bone mineral. The pIHA at 50% dissolution was employed as an average value. The pIHA (50%) values for pooled data (58.76 for enamel and 60.17 for hydroxyapatite) were lower than the respective pIHA previously measured by conventional equilibration techniques. However, the average pIHA measured for enamel was higher than that obtained by the same technique in another study, possibly because of differences in specimen preparation and equilibration time. The possible implications of the findings for understanding the process of dental caries are discussed.