Bioconservation of deteriorated monumental calcarenite stone and identification of bacteria with carbonatogenic activity

Bioconsolidation strategies for carbonate lithologies: Effectiveness and mechanisms in calcarenite, travertine, and marble

Toxic substances are often employed in conventional stone preservation techniques, whereas biorestoration offers material compatibility along with significant benefits for cultural heritage preservation, environmental safety, and sustainability. However, the application of this innovative technique to natural rocks is not fully understood. In this study, we evaluated the efficiency of a carbonatogenic bacterial strain (Lysinbacillus fusiformis 3.20) on three natural carbonate rocks: Calcarenite (CA), Travertine (TR) and Marble (MA), having different porosities. We integrated surface analyses (Field Emission Scanning Electron Microscopy, Atomic Force Microscopy, and X-Ray Diffraction) with bulk analyses (Porosity, Ultrasonic Wave Velocity, and Dynamic Elastic Moduli) to investigate the bioconsolidation processes. The results indicated that the biomineralization treatment had no effect on MA samples, while it improved the physical and mechanical properties of both CA and TR, evidenced by the formation of new bioprecipitates. Total and effective porosity decreased, particularly in CA, while ultrasonic wave velocities (Vp and Vs) and Young's modulus increased, with Poisson's ratio remaining unchanged. Comparative observations suggest that connected, randomly distributed, and low aspect ratio pores facilitate microbial activity by enabling deeper bacterial penetration into the stone, supporting nutrient distribution and the formation of calcium carbonate precipitates. When the treatment is effective, stiffness and strength are expected to increase due to reduced effective porosity, while resistance to shear deformation remains nearly constant, as does the relationship between porosity and wave velocities.

Biomineral deposits and coatings on stone monuments as biodeterioration fingerprints

Biominerals deposition processes, also called biomineralisation, are intimately related to biodeterioration on stone surfaces. They include complex processes not always completely well understood. The study of biominerals implies the identification of organisms, their molecular mechanisms, and organism/rock/atmosphere interactions. Sampling restrictions of monument stones difficult the biominerals study and the in situ demonstrating of biodeterioration processes. Multidisciplinary works are required to understand the whole process. Thus, studies in heritage buildings have taken advantage of previous knowledge acquired thanks to laboratory experiments, investigations carried out on rock outcrops and within caves from some years ago. With the extrapolation of such knowledge to heritage buildings and the advances in laboratory techniques, there has been a huge increase of knowledge regarding biomineralisation and biodeterioration processes in stone monuments during the last 20 years. These advances have opened new debates about the implications on conservation interventions, and the organism's role in stone conservation and decay. This is a review of the existing studies of biominerals formation, biodeterioration on laboratory experiments, rocks, caves, and their application to building stones of monuments.

Biofilm colonization of stone materials from an Australian outdoor sculpture: Importance of geometry and exposure

The safeguarding of Australian outdoor stone heritage is currently limited by a lack of information concerning mechanisms responsible for the degradation of the built heritage. In this study, the bacterial community colonizing the stone surface of an outdoor sculpture located at the Church of St. John the Evangelist in Melbourne was analysed, providing an overview of the patterns of microbial composition associated with stone in an anthropogenic context. Illumina MiSeq 16S rRNA gene sequencing together with confocal laser microscope investigations highlighted the bacterial community was composed of both phototrophic and chemotrophic microorganisms characteristic of stone and soil, and typical of arid, salty and urban environments. Cardinal exposure, position and surface geometry were the most important factors in determining the structure of the microbial community. The North-West exposed areas on the top of the sculpture with high light exposure gave back the highest number of sequences and were dominated by Cyanobacteria. The South and West facing in middle and lower parts of the sculpture received significantly lower levels of radiation and were dominated by Actinobacteria. Proteobacteria were observed as widespread on the sculpture. This pioneer research provided an in-depth investigation of the microbial community structure on a deteriorated artistic stone in the Australian continent and provides information for the identification of deterioration-associated microorganisms and/or bacteria beneficial for stone preservation.

The Roman Houses of the Caelian Hill (Rome, Italy): Multitemporal Evaluation of Biodeterioration Patterns

Like other hypogeal environments, the Roman Houses of the Caelian Hill are prone to unwanted biological growth. Wide conservative interventions have been carried out at the beginning of this millenium to reduce biodeterioration and physical-chemical damages. Retracing the last monitoring work, we assessed the site's current state of conservation and biodeterioration intending to check the previous treatments' effectiveness and deepen the common knowledge of the subterranean biota and their possible biodeteriogenic effects. Starting from the past test areas and the previous identifications of the occurring biodeteriogens, we further isolated and identified the main eubacterial, fungal, and phototrophic settlers, focusing on some detrimental traits for wall paintings (i.e., acid production and carbonate precipitation). The achieved results proved the success of the performed interventions in reducing the wall's water content. Otherwise, the new conditions raise, in the long term, new concerns about lampenflora, carbonate precipitations, and salt efflorescence. Here, the Caelian Houses' new status is documented. The possible favouring conditions for the different groups of biodeteriogens, along with the taxonomical novelties, additional risks tied to the anthropization of the resident culturable microbial community, and the possible relation between the black fungus Cyphellophora olivacea and roots, are reported and discussed.

Improvement of microstructure of cementitious composites by microbially-induced calcite precipitation

In this study, microstructural improvement of cementitious composites was achieved by bacterial CaCO₃ precipitation using three bacterial species, namely Sporosarcina pasteurii, Bacillus cereus, and Actinobacteria sp. M135-3, respectively. The final product was comparatively investigated regarding the physical effects of urease activity of different cells on the mortar in the long term.Microstructural improvement was determined by evaluating the pore structure by determining the increase in strength, decrease in water absorption, and capillary water absorption rate of the cement mortars having different microorganism concentrations (10⁶-10⁹ bacteria/ml). These measurements were taken on bacteria-containing and control samples on the 2nd, 7th, 28th, and 56th days, respectively. In addition, calcite and vaterite as calcium carbonate polymorphs formed by the precipitation of calcium carbonate by three types of bacteria were identified by Scanning electron microscopy and energy dispersive X-ray spectroscopy (SEM/EDS), X-ray diffraction (XRD) and Thermogravimetric analysis - Differential scanning calorimetry (TGA-DSC) analyzes.The bacteria-containing mortar samples showed that bacterial species and concentrations directly affect cementitious composites' mechanical and physical properties. Composite samples containing bacteria resulted in statistically significant microstructural improvements measured by higher mechanical strength, lower water absorption value, and capillary water absorption rate compared to control samples, especially at early ages. However, the effect of microbial calcite formation diminishes at later ages, especially at 56-days, attributed to the bacteria cells losing their vitality and integrity and forming spaces inside the mortars.

Microbially-Induced-Calcite-Precipitation (MICP): A Biotechnological Approach to Enhance the Durability of Concrete Using Bacillus pasteurii and Bacillus sphaericus

Developing bio-based self-healing concrete aims to minimize durability problems related to cracking. In this study, MICP was used as a smart and eco-friendly approach to produce bio-based durable materials. Bacillus pasteurii (BP) and Bacillus sphaericus (BS) were added into mortar mixtures with 0.25% and 0.5% cement weight. All treated samples exhibited a significant decline in water uptake, capillary permeability, and volume of permeable voids, as compared to control with no bacteria. All treated samples showed significant increase in compressive strength by 28–50%, after 28 days of curing. At the age of 120 days, the flexural strength of all treated samples was significantly increased by 19.29–65.94%. SEM imaging and EDAX confirmed that treated samples were denser with less voids due to MICP. DTA verified that the calcite amount and the crystallinity degree were improved in treated samples. Load deflection of bacterial Reinforced-Laminates had less deformation than control. Reloaded bacterial Reinforced-Laminates exhibited excellent restoration of physico-mechanical properties and performance, after 28, 90, and 120 days, confirming the healing process. Microbial self-healing is an innovative approach for continuous repair of micro-cracks in concrete, improving its durability, thus can reduce the maintenance costs.

•

Microbial calcite-precipitation is used as a smart and eco-friendly approach to produce bio-based durable concrete.

•

SEM, EDAX & DTA verified that the addition of B. pasteurii & B. sphaericus into mortar induced calcite bio-precipitation.

•

Bacterial mortar had high restoration for load deflection & stiffer with less deformation than control, confirming its healing.

•

Bacterial mortar exhibited improved physico-mechanical performance & durability with great potential for application.

•

Microbial self-healing is an innovative bio-approach for repairing micro-cracks in concrete thus can reduce maintenance costs.

Production of bioconcrete with improved durability properties using Alkaliphilic Egyptian bacteria

Microbial-based self-healing of concrete represents innovative technology for improving micro-crack sealing. Microbial bioactivity can induce calcite-precipitation in concrete, which seals micro-cracks. In this respect, two Egyptian bacterial isolates were selected and identified, as Bacillus subtilis (Bs) and Bacillus megaterium (Bm) using MALDI-TOF/MS-Biotyper^®. Peak patterns of the bacterial ribosomal proteins showed a high match between samples and standards, which verified species consistency. Bs and Bm were added to the mortar mixture in two concentrations (0.5%, 1%) of cement weight, then the mechanical and physical properties were tested throughout a 180-day time course. The compressive strength of Bm0.5 bacterial mortar samples was increased by 21.4% after 28 days, as compared to control. The rate of water absorption of Bm samples was decreased by 12.4% after 180 days. Bacterial mortar samples showed significant restoration of compressive strength than the original samples by 44%, 21%, and 52.6% for Bs1, Bm0.5, and Bs0.5, respectively. SEM and EDAX analyses confirmed that bacterial samples were denser with fewer voids than the control, as a result of microbial nanosized calcite-precipitation. DTA verified that the amount of CaCO₃ and its degree of crystallinity were increased in the bacterial mortar samples. Load-deflection of reinforced-laminates for bacterial mortar samples showed ductile behavior and less deformation as compared to control. In this work, novel concrete with improved mechanical and physical properties has been developed using selected Egyptian microorganisms, it can promote self-healing of micro-cracks with improved durability of the concrete. The application of self-healing bioconcrete can reduce the inspection and maintenance costs.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-02781-0.

Role of Exposure on the Microbial Consortiums on Historical Rural Granite Buildings

Local granite has been used throughout history in Galicia (NW Spain), forming the basis of much of the region’s architecture. Like any other rock, granite provides an ecological niche for a multitude of organisms that form biofilms that can affect the physical integrity of the stone. In this study, for the first time, characterization of the microbial consortium forming biofilms that developed on historical rural granite buildings is carried out using a combination of culture-dependent and next generation sequencing (NGS) techniques. Results pointed to differences in biofilm composition on the studied rural granite buildings and that of previously analyzed urban granite buildings, especially in terms of abundance of cyanobacteria and lichenized fungi. Exposure was corroborated as an important factor, controlling both the diversity and abundance of microorganisms on walls, with environmental factors associated with a northern orientation favoring a higher diversity of fungi and green algae, and environmental factors associated with the west orientation determining the abundance of lichenized fungi. The orientation also affected the distribution of green algae, with one of the two most abundant species, Trentepohlia cf. umbrina, colonizing north-facing walls, while the other, Desmococcus olivaceus, predominated on west-facing walls.

Diversity and structure of soil microbiota of the Jinsha earthen relic

In order to define the diversity and composition of the microbial communities colonizing of the soil microbiome of the Jinsha earthen relic, we used high-throughput sequencing technology to identify and characterize the microbiota in 22 samples collected from the Jinsha earthen relic in China during 2017 and 2018. We compared the taxonomy of the microbial communities from samples taken at different times and different sites. Our results showed that the identity of the dominant bacterial phyla differed among the samples. Proteobacteria (23–86.2%) were the predominant bacterial phylum in all samples taken from site A in both 2017 and 2018. However, Actinobacteria (21–92.3%) were the most popular bacterial phylum in samples from sites B and C in 2017 and 2018. Ascomycota were identified as the only fungal phyla in samples in 2017. However, the group varied drastically in relative abundance between 2017 and 2018. Functional analysis of the soil bacterial community suggested that abundant members of the microbiota may be associated with metabolism and the specific environment. This report was the first high-throughput sequencing study of the soil of the Jinsha earthen relic microbiome. Since soil microbiota can damage soil and archeological structures, comprehensive analyses of the microbiomes at archeological sites may contribute to the understand of the influence of microorganisms on the degradation of soil, as well as to the identification of potentially beneficial or undesirable members of these microbial communities in archeological sites. The study will be helpful to provide effective data and guidance for the prevention and control of microbial corrosion of the Jinsha earthen relic.

Bacterial Calcium Carbonate Mineralization in situ Strategies for Conservation of Stone Artworks: From Cell Components to Microbial Community

Calcareous stones have been widely used in artworks and buildings by almost all human cultures. Now, more than ever, the increased environmental pollution and global warming are threatening the stone cultural heritage. Weathering due to physical, chemical and biological factors results in monumental calcareous stone deterioration. These agents induce a progressive dissolution of the mineral matrix, increase porosity, and lead to structural weakening. Bacterial Calcium Carbonate Mineralization is a widespread naturally occurring process which in the last decades was proposed as an environmentally friendly tool to protect monumental and ornamental calcareous stones. The advantage of this treatment is that it mimics the natural process responsible for stone formation, producing a mineral product similar to the stone substrate. This mini review highlights the milestones of the biomineralization approaches with focus on in situ stone artworks protection. The strategies explored to date are based on three main approaches: (i) the use of allochthonous and (ii) autochthonous alive cells that, due to the bacterial metabolism, foster biomineralization; (iii) the cell-free approach which uses fractionated cellular components inducing biomineralization. We discuss the challenging aspects of all these techniques, focusing on in situ applications and suggesting perspectives based on recent advances.

Exploring bacterial community composition in Mediterranean deep-sea sediments and their role in heavy metal accumulation

The role of microbial processes in bioaccumulation of major and trace elements has been broadly demonstrated. However, microbial communities from marine sediments have been poorly investigated to this regard. In marine environments, particularly under high anthropogenic pressure, heavy metal accumulation increases constantly, which may lead to significant environmental issues. A better knowledge of bacterial diversity and its capability to bioaccumulate metals is essential to face environmental quality assessment. The oligotrophic westernmost Mediterranean, which is highly sensitive to environmental changes and subjected to increasing anthropogenic pressure, was selected for this study. A sediment core spanning the last two millennia was sampled at two intervals, with ages corresponding to 140 (S1) and 1400 (S2) yr BP. High-throughput sequencing showed an abundance of Bacillus, Micrococcus, unclassified members of Planococcaceae, Anaerolineaceae, Planctomycetaceae, Microlunatus, and Microbacterium in both intervals, with slight differences in their abundance, along with newly detected ones in S2, i.e., Propionibacterium, Fictibacillus, Thalassobacillus, and Bacteroides. Canonical correspondence analysis (CCA) and co-occurrence patterns confirmed strong correlations among the taxa and the environmental parameters, suggesting either shared and preferred environmental conditions, or the performance of functions similar to or complementary to each other. These results were further confirmed using culture-dependent methods. The diversity of the culturable bacterial community revealed a predominance of Bacillus, and Micrococcus or Kocuria. The interaction of these bacterial communities with selected heavy metals (Cu, Cr, Zn and Pb) was also investigated, and their capacity of bioaccumulating metals within the cells and/or in the extracellular polymeric substances (EPS) is demonstrated. Interestingly, biomineralization of Pb resulted in the precipitation of Pb phosphates (pyromorphite). Our study supports that remnants of marine bacterial communities can survive in deep-sea sediments over thousands of years. This is extremely important in terms of bioremediation, in particular when considering possible environmentally friendly strategies to bioremediate inorganic contaminants.

Recent Advances in Protective Coatings for Cultural Heritage–An Overview

In the last decades, the interest in the development of protective coatings for movable and immovable Cultural Heritage (CH) assets has decidedly increased. This has been mainly prompted by the raising consciousness on preservation requirements for cultural artefacts and monuments, which has consequently determined the development of new protective products. From acrylic resins used at the end of the last century to the up-to-date biomaterials and nanoparticles employed nowadays, the research has made a giant step forward. This article reviews the progresses, the technical challenges, and the most recent advances in protective coatings for archaeological metal, glass, and stone artefacts. It aims at offering a comprehensive and critical overview of the progressions in conservation science and displaying how research has optimized polymers in order to solve deterioration problems. Attention is given to recently developed materials, hybrid coatings, and corrosion inhibitors. This work seeks to provide a reference point for future research and to offer a wide-ranging introduction on the newly available material technologies to restorers and conservators.

Microbially induced calcium carbonate precipitation: a widespread phenomenon in the biological world

Biodeposition of minerals is a widespread phenomenon in the biological world and is mediated by bacteria, fungi, protists, and plants. Calcium carbonate is one of those minerals that naturally precipitate as a by-product of microbial metabolic activities. Over recent years, microbially induced calcium carbonate precipitation (MICP) has been proposed as a potent solution to address many environmental and engineering issues. However, for being a viable alternative to conventional techniques as well as being financially and industrially competitive, various challenges need to be overcome. In this review, the detailed metabolic pathways, including ammonification of amino acids, dissimilatory reduction of nitrate, and urea degradation (ureolysis), along with the potent bacteria and the favorable conditions for precipitation of calcium carbonate, are explained. Moreover, this review highlights the potential environmental and engineering applications of MICP, including restoration of stones and concrete, improvement of soil properties, sand consolidation, bioremediation of contaminants, and carbon dioxide sequestration. The key research and development questions necessary for near future large-scale applications of this innovative technology are also discussed.

Molecular biological tools in concrete biodeterioration - a mini review

Concrete structures develop biofilms when exposed to various environments. At a certain stage, the microbial films destroy the concrete structures leading to significant deterioration. Culture-dependent techniques give an incomplete picture of the microbial communities on the concrete surface. Culture-independent techniques or molecular biological tools pave a new way to analyse microbial communities involved in concrete biodeterioration. This study highlights the need to 'build' a database, for Microbiologically Influenced Concrete Corrosion (MICC) involving microbial groups that are being identified using culture-dependent and independent techniques. The role of molecular tools such as 16S rRNA sequencing, denaturing gradient gel electrophoresis (DGGE), Fluorescent in situ hybridization (FISH), Real-time Polymerase Chain Reaction (RT-PCR), microarray analysis, 2-Dimensional gel electrophoresis (2-DE) in analysing microbial communities on the concrete structures have been reviewed in this paper.

Alkaliphiles: The Emerging Biological Tools Enhancing Concrete Durability

Concrete is one of the most commonly used building materials ever used. Despite it is a very important and common construction material, concrete is very sensitive to crack formation and requires repair. A variety of chemical-based techniques and materials have been developed to repair concrete cracks. Although the use of these chemical-based repair systems are the best commercially available choices, there have also been concerns related to their use. These repair agents suffer from inefficiency and unsustainability. Most of the products are expensive and susceptible to degradation, exhibit poor bonding to the cracked concrete surfaces, and are characterized by different physical properties such as thermal expansion coefficients which are different to that of concrete. Moreover, many of these repair agents contain chemicals that pose environmental and health hazards. Thus, there has been interest in developing concrete crack repair agents that are efficient, long lasting, safe, and benign to the environment and exhibit physical properties which resemble that of the concrete. The search initiated by these desires brought the use of biomineralization processes as tools in mending concrete cracks. Among biomineralization processes, microbially initiated calcite precipitation has emerged as an interesting alternative to the existing chemical-based concrete crack repairing system. Indeed, results of several studies on the use of microbial-based concrete repair agents revealed the remarkable potential of this approach in the fight against concrete deterioration. In addition to repairing existing concrete cracks, microorganisms have also been considered to make protective surface coating (biodeposition) on concrete structures and in making self-healing concrete.Even though a wide variety of microorganisms can precipitate calcite, the nature of concrete determines their applicability. One of the important factors that determine the applicability of microbes in concrete is pH. Concrete is highly alkaline in nature, and hence the microbes envisioned for this application are alkaliphilic or alkali-tolerant. This work reviews the available information on applications of microbes in concrete: repairing existing cracks, biodeposition, and self-healing. Moreover, an effort is made to discuss biomineralization processes that are relevant to extend the durability of concrete structures. Graphical Abstract.

Protection and consolidation of stone heritage by self-inoculation with indigenous carbonatogenic bacterial communities

Enhanced salt weathering resulting from global warming and increasing environmental pollution is endangering the survival of stone monuments and artworks. To mitigate the effects of these deleterious processes, numerous conservation treatments have been applied that, however, show limited efficacy. Here we present a novel, environmentally friendly, bacterial self-inoculation approach for the conservation of stone, based on the isolation of an indigenous community of carbonatogenic bacteria from salt damaged stone, followed by their culture and re-application back onto the same stone. This method results in an effective consolidation and protection due to the formation of an abundant and exceptionally strong hybrid cement consisting of nanostructured bacterial CaCO3 and bacterially derived organics, and the passivating effect of bacterial exopolymeric substances (EPS) covering the substrate. The fact that the isolated and identified bacterial community is common to many stone artworks may enable worldwide application of this novel conservation methodology.Salt weathering enhanced by global warming and environmental pollution is increasingly threatening stone monuments and artworks. Here, the authors present a bacterial self-inoculation approach with indigenous carbonatogenic bacteria and find that this technique consolidates and protects salt damaged stone.

The microbial community characteristics of ancient painted sculptures in Maijishan Grottoes, China

In this study, a culture-independent Illumina MiSeq sequencing strategy was applied to investigate the microbial communities colonizing the ancient painted sculptures of the Maijishan Grottoes, a famous World Cultural Heritage site listed by UNESCO in China. Four mixed samples were collected from Cave 4–4 of the Maijishan Grottoes, the so-called Upper Seven Buddha Pavilion, which was built during the Northern Zhou Dynasty (557-581AD). The 16/18S rRNA gene-based sequences revealed a rich bacterial diversity and a relatively low fungal abundance, including the bacterial groups Actinobacteria, Acidobacteria, Bacteroidetes, Cyanobacteria, Chloroflexi, Firmicutes, Proteobacteria and Verrucomicrobia and the fungal groups Ascomycota, Basidiomycota and Chytridiomycota. Among them, the bacteria genera of Pseudonocardia and Rubrobacter and unclassified fungi in the order of Capnodiales were dominant. The relative abundance of Pseudonocardia in the painted layer samples was higher than that in the dust sample, while Cyanobacteria dominated in the dust sample. Many of them have been discovered at other cultural heritage sites and associated with the biodeterioration of cultural relics. The presence and activity of these pioneering microorganisms may lead to an unexpected deterioration of the painted sculptures that are preserved in this heritage site. Thus, proper management strategies and potential risk monitoring should be used in the Maijishan Grottoes to improve the conservation of these precious painted sculptures.

Carbonate Precipitation through Microbial Activities in Natural Environment, and Their Potential in Biotechnology: A Review

Calcium carbonate represents a large portion of carbon reservoir and is used commercially for a variety of applications. Microbial carbonate precipitation, a by-product of microbial activities, plays an important metal coprecipitation and cementation role in natural systems. This natural process occurring in various geological settings can be mimicked and used for a number of biotechnologies, such as metal remediation, carbon sequestration, enhanced oil recovery, and construction restoration. In this study, different metabolic activities leading to calcium carbonate precipitation, their native environment, and potential applications and challenges are reviewed.

Molecular Tools for Monitoring the Ecological Sustainability of a Stone Bio-Consolidation Treatment at the Royal Chapel, Granada

BACKGROUND

Biomineralization processes have recently been applied in situ to protect and consolidate decayed ornamental stone of the Royal Chapel in Granada (Spain). While this promising method has demonstrated its efficacy regarding strengthening of the stone, little is known about its ecological sustainability.

METHODOLOGY/PRINCIPAL FINDINGS

Here, we report molecular monitoring of the stone-autochthonous microbiota before and at 5, 12 and 30 months after the bio-consolidation treatment (medium/long-term monitoring), employing the well-known molecular strategy of DGGE analyses. Before the bio-consolidation treatment, the bacterial diversity showed the exclusive dominance of Actinobacteria (100%), which decreased in the community (44.2%) after 5 months, and Gamma-proteobacteria (30.24%) and Chloroflexi (25.56%) appeared. After 12 months, Gamma-proteobacteria vanished from the community and Cyanobacteria (22.1%) appeared and remained dominant after thirty months, when the microbiota consisted of Actinobacteria (42.2%) and Cyanobacteria (57.8%) only. Fungal diversity showed that the Ascomycota phylum was dominant before treatment (100%), while, after five months, Basidiomycota (6.38%) appeared on the stone, and vanished again after twelve months. Thirty months after the treatment, the fungal population started to stabilize and Ascomycota dominated on the stone (83.33%) once again. Members of green algae (Chlorophyta, Viridiplantae) appeared on the stone at 5, 12 and 30 months after the treatment and accounted for 4.25%, 84.77% and 16.77%, respectively.

CONCLUSIONS

The results clearly show that, although a temporary shift in the bacterial and fungal diversity was observed during the first five months, most probably promoted by the application of the bio-consolidation treatment, the microbiota tends to regain its initial stability in a few months. Thus, the treatment does not seem to have any negative side effects on the stone-autochthonous microbiota over that time. The molecular strategy employed here is suggested as an efficient monitoring tool to assess the impact on the stone-autochthonous microbiota of the application of biomineralization processes as a restoration/conservation procedure.

Biomineralization processes of calcite induced by bacteria isolated from marine sediments

Biomineralization is a known natural phenomenon associated with a wide range of bacterial species. Bacterial-induced calcium carbonate precipitation by marine isolates was investigated in this study. Three genera of ureolytic bacteria, Sporosarcina sp., Bacillus sp. and Brevundimonas sp. were observed to precipitate calcium carbonate minerals. Of these species, Sporosarcina sp. dominated the cultured isolates. B. lentus CP28 generated higher urease activity and facilitated more efficient precipitation of calcium carbonate at 3.24 ± 0.25 × 10⁻⁴ mg/cell. X-ray diffraction indicated that the dominant calcium carbonate phase was calcite. Scanning electron microscopy showed that morphologies of the minerals were dominated by cubic, rhombic and polygonal plate-like crystals. The dynamic process of microbial calcium carbonate precipitation revealed that B. lentus CP28 precipitated calcite crystals through the enzymatic hydrolysis of urea, and that when ammonium ion concentrations reached 746 mM and the pH reached 9.6, that favored calcite precipitation at a higher level of 96 mg/L. The results of this research provide evidence that a variety of marine bacteria can induce calcium carbonate precipitation, and may influence the marine carbonate cycle in natural environments.

Role of bacteria in marine barite precipitation: a case study using Mediterranean seawater

Marine bacteria isolated from natural seawater were used to test their capacity to promote barite precipitation under laboratory conditions. Seawater samples were collected in the western and eastern Mediterranean at 250 m and 200 m depths, respectively, since marine barite formation is thought to occur in the upper water column. The results indicate that Pseudoalteromonas sp., Idiomarina sp. and Alteromonas sp. actually precipitate barite under experimental conditions. Barite precipitates show typical characteristics of microbial precipitation in terms of size, morphology and composition. Initially, a P-rich phase precipitates and subsequently evolves to barite crystals with low P contents. Under laboratory conditions barite formation correlates with extracellular polymeric substances (EPS) production. Barite precipitates are particularly abundant in cultures where EPS production is similarly abundant. Our results further support the idea that bacteria may provide appropriate microenvironments for mineral precipitation in the water column. Therefore, bacterial production in the past ocean should be considered when using Ba proxies for paleoproductivity reconstructions.

The community distribution of bacteria and fungi on ancient wall paintings of the Mogao Grottoes

In this study, we compared the microbial communities colonising ancient cave wall paintings of the Mogao Grottoes exhibiting signs of biodeterioration. Ten samples were collected from five different caves built during different time periods and analysed using culture-independent and culture-dependent methods. The clone library results revealed high microbial diversity, including the bacterial groups Firmicutes, Proteobacteria, Actinobacteria, Acidobacteria, Cyanobacteria, Bacteroidetes, Gemmatimonadetes, Planctomycetes, and Chloroflexi and the fungal groups Euascomycetes, Dothideomycetes, Eurotiomycetes, Sordariomycetes, Saccharomycetes, Plectomycetes, Pezizomycetes, Zygomycota, and Basidiomycota. The bacterial community structures differed among the samples, with no consistent temporal or spatial trends. However, the fungal community diversity index correlated with the building time of the caves independent of environmental factors (e.g., temperature or relative humidity). The enrichment cultures revealed that many culturable strains were highly resistant to various stresses and thus may be responsible for the damage to cave paintings in the Mogao Grottoes.

The dual role of microbes in corrosion

Corrosion is the result of a series of chemical, physical and (micro) biological processes leading to the deterioration of materials such as steel and stone. It is a world-wide problem with great societal and economic consequences. Current corrosion control strategies based on chemically produced products are under increasing pressure of stringent environmental regulations. Furthermore, they are rather inefficient. Therefore, there is an urgent need for environmentally friendly and sustainable corrosion control strategies. The mechanisms of microbially influenced corrosion and microbially influenced corrosion inhibition are not completely understood, because they cannot be linked to a single biochemical reaction or specific microbial species or groups. Corrosion is influenced by the complex processes of different microorganisms performing different electrochemical reactions and secreting proteins and metabolites that can have secondary effects. Information on the identity and role of microbial communities that are related to corrosion and corrosion inhibition in different materials and in different environments is scarce. As some microorganisms are able to both cause and inhibit corrosion, we pay particular interest to their potential role as corrosion-controlling agents. We show interesting interfaces in which scientists from different disciplines such as microbiology, engineering and art conservation can collaborate to find solutions to the problems caused by corrosion.

Consolidation of archaeological gypsum plaster by bacterial biomineralization of calcium carbonate

Gypsum plasterworks and decorative surfaces are easily degraded, especially when exposed to humidity, and thus they require protection and/or consolidation. However, the conservation of historical gypsum-based structural and decorative materials by conventional organic and inorganic consolidants shows limited efficacy. Here, a new method based on the bioconsolidation capacity of carbonatogenic bacteria inhabiting the material was assayed on historical gypsum plasters and compared with conventional consolidation treatments (ethyl silicate; methylacrylate-ethylmethacrylate copolymer and polyvinyl butyral). Conventional products do not reach in-depth consolidation, typically forming a thin impervious surface layer which blocks pores. In contrast, the bacterial treatment produces vaterite (CaCO3) biocement, which does not block pores and produces a good level of consolidation, both at the surface and in-depth, as shown by drilling resistance measurement system analyses. Transmission electron microscopy analyses show that bacterial vaterite cement formed via oriented aggregation of CaCO3 nanoparticles (∼20nm in size), resulting in mesocrystals which incorporate bacterial biopolymers. Such a biocomposite has superior mechanical properties, thus explaining the fact that drilling resistance of bioconsolidated gypsum plasters is within the range of inorganic calcite materials of equivalent porosity, despite the fact that the bacterial vaterite cement accounts for only a 0.02 solid volume fraction. Bacterial bioconsolidation is proposed for the effective consolidation of this type of material. The potential applications of bacterial calcium carbonate consolidation of gypsum biomaterials used as bone graft substitutes are discussed.

Calcium carbonate precipitation by heterotrophic bacteria isolated from biofilms formed on deteriorated ignimbrite stones: influence of calcium on EPS production and biofilm formation by these isolates

Heterotrophic CaCO3-precipitating bacteria were isolated from biofilms on deteriorated ignimbrites, siliceous acidic rocks, from Morelia Cathedral (Mexico) and identified as Enterobacter cancerogenus (22e), Bacillus sp. (32a) and Bacillus subtilis (52g). In solid medium, 22e and 32a precipitated calcite and vaterite while 52g produced calcite. Urease activity was detected in these isolates and CaCO3 precipitation increased in the presence of urea in the liquid medium. In the presence of calcium, EPS production decreased in 22e and 32a and increased in 52g. Under laboratory conditions, ignimbrite colonization by these isolates only occurred in the presence of calcium and no CaCO3 was precipitated. Calcium may therefore be important for biofilm formation on stones. The importance of the type of stone, here a siliceous stone, on biological colonization is emphasized. This calcium effect has not been reported on calcareous materials. The importance of the effect of calcium on EPS production and biofilm formation is discussed in relation to other applications of CaCO3 precipitation by bacteria.

Microscopic, chemical, and molecular-biological investigation of the decayed medieval stained window glasses of two Catalonian churches

We investigated the decayed historical church window glasses of two Catalonian churches, both under Mediterranean climate. Glass surfaces were studied by scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), and X-ray diffraction (XRD). Their chemical composition was determined by wavelength-dispersive spectrometry (WDS) microprobe analysis. The biodiversity was investigated by molecular methods: DNA extraction from glass, amplification by PCR targeting the16S rRNA and ITS regions, and fingerprint analyses by denaturing gradient gel electrophoresis (DGGE). Clone libraries containing either PCR fragments of the bacterial 16S rDNA or the fungal ITS regions were screened by DGGE. Clone inserts were sequenced and compared with the EMBL database. Similarity values ranged from 89 to 100% to known bacteria and fungi. Biological activity in both sites was evidenced in the form of orange patinas, bio-pitting, and mineral precipitation. Analyses revealed complex bacterial communities consisting of members of the phyla Proteobacteria, Bacteroidetes, Firmicutes, and Actinobacteria. Fungi showed less diversity than bacteria, and species of the genera Cladosporium and Phoma were dominant. The detected Actinobacteria and fungi may be responsible for the observed bio-pitting phenomenon. Moreover, some of the detected bacteria are known for their mineral precipitation capabilities. Sequence results also showed similarities with bacteria commonly found on deteriorated stone monuments, supporting the idea that medieval stained glass biodeterioration in the Mediterranean area shows a pattern comparable to that on stone.

Microbial communities adhering to the obverse and reverse sides of an oil painting on canvas: identification and evaluation of their biodegradative potential

In this study, we investigated and compared the microbial communities adhering to the obverse and the reverse sides of an oil painting on canvas exhibiting signs of biodeterioration. Samples showing no visible damage were investigated as controls. Air samples were also analysed, in order to investigate the presence of airborne microorganisms suspended in the indoor atmosphere. The diversity of the cultivable microorganisms adhering to the surface was analysed by molecular techniques, such as RAPD analysis and gene sequencing. DGGE fingerprints derived from DNA directly extracted from canvas material in combination with clone libraries and sequencing were used to evaluate the non-cultivable fraction of the microbial communities associated with the material. By using culture-dependent methods, most of the bacterial strains were found to be common airborne, spore-forming microorganisms and belonged to the phyla Actinobacteria and Firmicutes, whereas culture-independent techniques identified sequenced clones affiliated with members of the phyla Actinobacteria and Proteobacteria. The diversity of fungi was shown to be much lower than that observed for bacteria, and only species of Penicillium spp. could be detected by cultivation techniques. The selected strategy revealed a higher microbial diversity on the obverse than on the reverse side of the painting and the near absence of actively growing microorganisms on areas showing no visible damage. Furthermore, enzymatic activity tests revealed that the most widespread activities involved in biodeterioration were esterase and esterase lipase among the isolated bacterial strains, and esterase and N-acetyl-β-glucosaminidase among fungi strains.

Pseudomonas, Pantoea and Cupriavidus isolates induce calcium carbonate precipitation for biorestoration of ornamental stone

AIMS

Bacterially induced calcium carbonate precipitation from various isolates was investigated aiming at developing an environmentally friendly technique for ornamental stone protection and restoration.

METHODS AND RESULTS

Micro-organisms isolated from stone samples and identified using 16S rDNA and biochemical tests promoted calcium carbonate precipitation in solid and novel liquid growth media. Biomineral morphology was studied on marble samples with scanning electron microscopy. Most isolates demonstrated specimen weight increase, covering partially or even completely the marble surfaces mainly with vaterite. The conditions under which vaterite precipitated and its stability throughout the experimental runs are presented.

CONCLUSIONS

A growth medium that facilitated bacterial growth of different species and promoted biomineralization was formulated. Most isolates induced biomineralization of CaCO3 . Micro-organisms may actually be a milestone in the investigation of vaterite formation facilitating our understanding of geomicrobiological interactions. Pseudomonas, Pantoea and Cupriavidus strains could be candidates for bioconsolidation of ornamental stone protection.

SIGNIFICANCE AND IMPACT OF THE STUDY

Characterization of biomineralization capacity of different bacterial species improves understanding of the bacterially induced mineralization processes and enriches the list of candidates for biorestoration applications. Knowledge of biomineral morphology assists in differentiating mineral from biologically induced precipitates.

Stone-isolated carbonatogenic bacteria as inoculants in bioconsolidation treatments for historical limestone

Stone consolidation treatments that use bacterial biomineralization are mainly based on two strategies: (1) the inoculation of a bacterial culture with proven carbonatogenic ability and/or (2) the application of a culture medium capable of activating those bacteria able to induce the formation of calcium carbonate, from amongst the bacterial community of the stone. While the second strategy has been demonstrated to be effective and, unlike first strategy, it does not introduce any exogenous microorganism into the stone, problems may arise when the bacterial community of the stone is altered, for instance by the use of biocides in the cleaning process. In this study we isolate bacteria that belong to the natural microbial community of the stone and which have proven biomineralization capabilities, with the aim of preparing an inoculum that may be used in stone consolidation treatments wherein the natural community of those stones is altered. With this aim, outdoor experiments were undertaken to activate and isolate bacteria that display high biomineralization capacity from altered calcarenite stone. Most of the bacteria precipitated calcium carbonate in the form of calcite. The selected bacteria were phylogenetically affiliated with members of Actinobacteria, Gamma-proteobacteria and Firmicutes. Furthermore, the capability of these selected carbonatogenic bacteria to consolidate altered calcarenite stone slabs was studied in in vitro experiments, both in the presence and the absence of Myxococcus xanthus, as a potential reinforcement for the bacterial biomineralization. Herein, Acinetobacter species, belonging to the microbial community of the stone, are proposed as powerful carbonatogenic bacteria that, inoculated under appropriate conditions, may be used as inoculum for calcareous stone conservation/consolidation in restoration interventions where the microbial community of the stone is altered.

Influence of substrate mineralogy on bacterial mineralization of calcium carbonate: implications for stone conservation

The influence of mineral substrate composition and structure on bacterial calcium carbonate productivity and polymorph selection was studied. Bacterial calcium carbonate precipitation occurred on calcitic (Iceland spar single crystals, marble, and porous limestone) and silicate (glass coverslips, porous sintered glass, and quartz sandstone) substrates following culturing in liquid medium (M-3P) inoculated with different types of bacteria (Myxococcus xanthus, Brevundimonas diminuta, and a carbonatogenic bacterial community isolated from porous calcarenite stone in a historical building) and direct application of sterile M-3P medium to limestone and sandstone with their own bacterial communities. Field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), powder X-ray diffraction (XRD), and 2-dimensional XRD (2D-XRD) analyses revealed that abundant highly oriented calcite crystals formed homoepitaxially on the calcitic substrates, irrespective of the bacterial type. Conversely, scattered spheroidal vaterite entombing bacterial cells formed on the silicate substrates. These results show that carbonate phase selection is not strain specific and that under equal culture conditions, the substrate type is the overruling factor for calcium carbonate polymorph selection. Furthermore, carbonate productivity is strongly dependent on the mineralogy of the substrate. Calcitic substrates offer a higher affinity for bacterial attachment than silicate substrates, thereby fostering bacterial growth and metabolic activity, resulting in higher production of calcium carbonate cement. Bacterial calcite grows coherently over the calcitic substrate and is therefore more chemically and mechanically stable than metastable vaterite, which formed incoherently on the silicate substrates. The implications of these results for technological applications of bacterial carbonatogenesis, including building stone conservation, are discussed.

Molecular monitoring of the microbial dynamics occurring on historical limestone buildings during and after the in situ application of different bio-consolidation treatments

Microbially Induced Carbonate Precipitation is proposed as an environmentally friendly method to protect decayed ornamental stone and introduced in the field of preservation of Cultural Heritage. Recent conservation studies performed under laboratory conditions on non-sterile calcarenite stones have successfully reported on the application of a suitable nutritional solution, inoculated and non-inoculated with Myxococcus xanthus, as a bioconsolidation treatment. Furthermore, this procedure has been applied in situ, very recently, to selected historical buildings in Granada, Spain. For the first time, we evaluate the efficiency and risks of the in situ application of the above mentioned treatments onto two historical buildings in Granada. The evaluation consists of a detailed investigation of the micro-biota actively growing during the seven days of the treatments--short-term monitoring and of that remaining on the stones after six and twelve months of the application--long-term monitoring. A molecular strategy, including DNA extraction, PCR amplification of 16S rRNA sequences, construction of clone libraries and fingerprinting by DGGE (Denaturing Gradient Gel Electrophoresis) analysis followed by sequencing was used to gain insight into the microbial diversity present on the differentially treated stones. The monitoring of M. xanthus was performed by PCR using species-specific primers. Similar dynamics were triggered on both buildings by the application of the nutritional solution (inoculated or non-inoculated). 16S rDNA sequencing revealed the dominant occurrence of members belonging to the Firmicutes and Proteobacteria during the seven days of the treatment, whereas after one year the order Bacillales of the phylum Firmicutes was the predominantly detected microorganisms. M. xanthus could be detected only during the seven days of the treatment. The treatments seem to activate no dangerous microorganisms and furthermore, to select the remainder of a homogeneous group of carbonatogenic bacteria on the stones after a long period of time.