Imaging microtubules and kinesin decorated microtubules using tapping mode atomic force microscopy in fluids

A bio-pen for direct writing of single molecules on user-functionalized surfaces

Advancing ultrahigh resolution (below 10 nm) direct writing technologies could lead to impacts in areas as diverse as disease detection, genetic analysis and nanomanufacturing. Current methods based on electron-beams and photo- or dip-pen nanolithography are laborious and lack flexibility when aiming to create single molecule patterns for application specific integration. We hypothesize that a novel strategy could be developed to allow for writing of parallel and yet individually addressable patterns of single molecules on user-controlled surfaces. The strategy is based on using in vitro self-recognition of tubulin protein to assemble rigid protofilaments of microtubules, with one such microtubule to be subsequently used as a "bio-pen" capable of writing "inks" of single kinesin molecules in user-defined environments. Our results show that single kinesin inks could be written under the energy of adenosine triphosphate hydrolysis and observed by both atomic force and optical microscopy. Upon extending ink functionalities, the integration of soft and hard materials for nanostructure assembly and complex single molecule pattern formation is envisioned.

Characterization and influence of hydroxyapatite nanopowders on living cells

Nanomaterials, such as hydroxyapatite nanoparticles show a great promise for medical applications due to their unique properties at the nanoscale. However, there are concerns about the safety of using these materials in biological environments. Despite a great number of published studies of nanoobjects and their aggregates or agglomerates, the impact of their physicochemical properties (such as particle size, surface area, purity, details of structure and degree of agglomeration) on living cells is not yet fully understood. Significant differences in these properties, resulting from different manufacturing methods, are yet another problem to be taken into consideration. The aim of this work was to investigate the correlation between the properties of nanoscale hydroxyapatite from different synthesis methods and biological activity represented by the viability of four cell lines: A549, CHO, BEAS-2B and J774.1 to assess the influence of the nanoparticles on immune, reproductive and respiratory systems.

High-Resolution Imaging of a Single Gliding Protofilament of Tubulins by HS-AFM

In vitro gliding assay of microtubules (MTs) on kinesins has provided us with valuable biophysical and chemo-mechanical insights of this biomolecular motor system. Visualization of MTs in an in vitro gliding assay has been mainly dependent on optical microscopes, limited resolution of which often render them insufficient sources of desired information. In this work, using high speed atomic force microscopy (HS-AFM), which allows imaging with higher resolution, we monitored MTs and protofilaments (PFs) of tubulins while gliding on kinesins. Moreover, under the HS-AFM, we also observed splitting of gliding MTs into single PFs at their leading ends. The split single PFs interacted with kinesins and exhibited translational motion, but with a slower velocity than the MTs. Our investigation at the molecular level, using the HS-AFM, would provide new insights to the mechanics of MTs in dynamic systems and their interaction with motor proteins.

AFM study shows prominent physical changes in elasticity and pericellular layer in human acute leukemic cells due to inadequate cell-cell communication

Biomechanical properties of single cells in vitro or ex vivo and their pericellular interfaces have recently attracted a lot of attention as a potential biophysical (and possibly prognostic) marker of various diseases and cell abnormalities. At the same time, the influence of the cell environment on the biomechanical properties of cells is not well studied. Here we use atomic force microscopy to demonstrate that cell-cell communication can have a profound effect on both cell elasticity and its pericellular coat. A human pre-B p190^BCR/ABL acute lymphoblastic leukemia cell line (ALL3) was used in this study. Assuming that cell-cell communication is inversely proportional to the distance between cells, we study ALL3 cells in vitro growing at different cell densities. ALL3 cells demonstrate a clear density dependent behavior. These cells grow very well if started at a relatively high cell density (HD, >2 × 10⁵ cells ml^-1) and are poised to grow at low cell density (LD, <1 × 10⁴ cells ml^-1). Here we observe ∼6× increase in the elastic (Young's) modulus of the cell body and ∼3.6× decrease in the pericellular brush length of LD cells compared to HD ALL3 cells. The difference observed in the elastic modulus is much larger than typically reported for pathologically transformed cells. Thus, cell-cell communication must be taken into account when studying biomechanics of cells, in particular, correlating cell phenotype and its biophysical properties.

Mapping nanomechanical properties of freshly grown, native, interlamellar organic sheets on flat pearl nacre

We imaged surfaces of freshly grown flat pearl nacre (Haliotis tuberculata) in different stages of growth in seawater using an atomic force microscope (AFM). Characteristic mineral phases of nacre, such as aragonitic stacks of coins, as well as the associated organic sheets, could be detected. Apart from imaging, the acquisition of force volumes on freshly grown organic surface areas on flat pearl nacre was conducted with the AFM. The evaluation of the force volumes with the Hertz-Sneddon model resulted in Young's moduli in the MPa range. The presented values are considerably smaller than values previously determined from macroscopic tensile tests. This might reflect the anisotropy of the organic nacre layers.

Substrate stiffness regulates solubility of cellular vimentin

The intermediate filament protein vimentin is involved in the regulation of cell behavior, morphology, and mechanical properties. Previous studies using cells cultured on glass or plastic substrates showed that vimentin is largely insoluble. Although substrate stiffness was shown to alter many aspects of cell behavior, changes in vimentin organization were not reported. Our results show for the first time that mesenchymal stem cells (hMSCs), endothelial cells, and fibroblasts cultured on different-stiffness substrates exhibit biphasic changes in vimentin detergent solubility, which increases from nearly 0 to 67% in hMSCs coincident with increases in cell spreading and membrane ruffling. When imaged, the detergent-soluble vimentin appears to consist of small fragments the length of one or several unit-length filaments. Vimentin detergent solubility decreases when these cells are subjected to serum starvation, allowed to form cell-cell contacts, after microtubule disruption, or inhibition of Rac1, Rho-activated kinase, or p21-activated kinase. Inhibiting myosin or actin assembly increases vimentin solubility on rigid substrates. These data suggest that in the mechanical environment in vivo, vimentin is more dynamic than previously reported and its assembly state is sensitive to stimuli that alter cellular tension and morphology.

Mechanics of microtubules: effects of protofilament orientation

Microtubules are hollow cylindrical polymers of the protein tubulin that play a number of important dynamic and structural roles in eukaryotic cells. Both in vivo and in vitro microtubules can exist in several possible configurations, differing in the number of protofilaments, helical rise of tubulin dimers, and protofilament skew angle with respect to the main tube axis. Here, finite element modeling is applied to examine the mechanical response of several known microtubule types when subjected to radial deformation. The data presented here provide an important insight into microtubule stiffness and reveal that protofilament orientation does not affect radial stiffness. Rather, stiffness is primarily dependent on the effective Young's modulus of the polymerized material and the effective radius of the microtubule. These results are also directly correlated to atomic force microscopy nanoindentation measurements to allow a more detailed interpretation of previous experiments. When combined with experimental data that show a significant difference between microtubules stabilized with a slowly hydrolyzable GTP analog and microtubules stabilized with paclitaxel, the finite element data suggest that paclitaxel increases the overall radial flexibility of the microtubule wall.

Structures of Yb nanoparticle thin films grown by deposition in He and N(2) gas atmospheres: AFM and x-ray reflectivity studies

Nanoparticles of lanthanide metals and their compounds are important from the viewpoint of both basic research and application to many functional devices. In the present work, a gas deposition technique was employed to prepare thin films composed of ytterbium (Z = 70) nanoparticles on a glass substrate. The influence of deposition conditions such as deposition temperature, time and gas pressure was studied in detail. In addition to an ordinary inert gas such as He, the possible use of N(2) was investigated. As a result of combined analysis using atomic force microscopy (AFM) and x-ray reflectivity, it was found that spherical nanoparticles of around 1-140 nm in diameter can be obtained upon deposition in both He and N(2) atmospheres. The thin film is not amorphous but fcc crystals of metallic ytterbium with a small amount of hcp phase are mainly formed. When exposed to air, the top surface is covered by an oxide layer due to natural oxidation. The thickness and density were in the range of 5-30 nm and 4-9 g cm(-3), respectively, depending on the deposition conditions. As only small amounts of nitrides were formed during deposition in an N(2) atmosphere in many cases, it was concluded that the use of N(2) can be a feasible alternative to the ordinary gas deposition method with an inert gas. Finally, some self-organized hexagonally shaped structures, which are more frequently observed upon deposition in N(2), are reported.

Single molecule atomic force microscopy and force spectroscopy of chitosan

Atomic force microscopy (AFM) and AFM-based force spectroscopy was used to study the desorption of individual chitosan polymer chains from substrates with varying chemical composition. AFM images of chitosan adsorbed onto a flat mica substrate show elongated single strands or aggregated bundles. The aggregated state of the polymer is consistent with the high level of flexibility and mobility expected for a highly positively charged polymer strand. Conversely, the visualization of elongated strands indicated the presence of stabilizing interactions with the substrate. Surfaces with varying chemical composition (glass, self-assembled monolayer of mercaptoundecanoic acid/decanethiol and polytetrafluoroethylene (PTFE)) were probed with chitosan modified AFM tips and the corresponding desorption energies, calculated from plateau-like features, were attributed to the desorption of individual polymer strands. Desorption energies of 2.0±0.3×10(-20)J, 1.8±0.3×10(-20)J and 3.5±0.3×10(-20)J were obtained for glass, SAM of mercaptoundecanoic/dodecanethiol and PTFE, respectively. These single molecule level results can be used as a basis for investigating chitosan and chitosan-based materials for biomaterial applications.

Simple coupling chemistry linking carboxyl-containing organic molecules to silicon oxide surfaces under acidic conditions

The coupling chemistry of carboxymethylated amylose with organo-silanized silicon oxide surfaces at pH 7.4 and 2.0 was investigated using atomic force microscopy (AFM) based single-molecule force spectroscopy. At close to neutral pH, carbodiimide activation of a carboxylic acid affords formation of an amide bond with an amino surface linker. At pH 2.0, no activation with carbodiimide was required to anchor carboxymethylated amylose between an AFM tip and a glass substrate. At the same time, the mean bond rupture force f(r) dropped from 1.65 ± 0.37 nN at pH 7.4 to 1.39 ± 0.30 nN at pH 2.0 without carbodiimide, indicating that a different link to the surface can be formed at low pH. The coupling mechanism at pH 2.0 was elucidated by a series of experiments, in which the surface was functionalized with four different organosilanes, each containing characteristic functional groups. The results are rationalized with an acid-catalyzed ester condensation between a carboxyl group and a free, unreacted silanol group in the surface anchor or on the surface.

High-resolution imaging of microtubules and cytoskeleton structures by atomic force microscopy

Atomic force microscopy (AFM), which combines a nanometer-scale resolution and a unique capacity to image biomolecular interactions in liquid environment, is a promising tool for the investigation of biological samples. In contrast with nucleic acids and nucleoprotein complexes, for which AFM is now of common use and participates in the recent advances in the knowledge of DNA-related biomolecular processes, AFM investigations of cytoskeleton structures and especially microtubules remain rare. The most critical step to observe biomolecules using AFM is the spreading of the biological material on a flat surface. This issue is now better documented concerning DNA but a lot remains to be done concerning microtubules. This is a prerequisite to further document this issue for a proper and large use of AFM to study cytoskeleton structures. We present here an overview of the various procedures previously used to spread microtubules on a flat surface and advance an easy-to-use and efficient experimental protocol for microtubule imaging by AFM in air. We show application of this protocol to observe intermediate structures of microtubule assembly without using any stabilizing agent and the observation of more complex systems like proteins or messenger ribonucleoprotein particles in interaction with microtubules.

Neuronal elasticity as measured by atomic force microscopy

A cell's form and function is determined to a great extent by its cellular membrane and the underlying cytoskeleton. Understanding changes in the cellular membrane and cytoskeleton can provide insight into aging and disease of the cell. The atomic force microscope (AFM) allows unparalled resolution for the imaging of these cellular components and the ability to probe their mechanical properties. This report describes our progress toward the use of AFM as a tool in neuroscience applications. Elasticity measurements are reported on living chick embryo dorsal root ganglion and sympathetic neurons in vitro. The neuronal cellular body and growth cones regions are examined for variations in cellular maturity. In addition, cellular changes due to exposure to various environmental conditions and neurotoxins are investigated. This report includes data obtained on different AFM systems, using various AFM techniques and thus also provides knowledge of AFM instruments and methodology.

Laboratory tests on mercury emission monitoring with resonating gold-coated silicon cantilevers

To measure extremely low concentrations of mercury vapor in gases as encountered in flue gases of coal-fired power plants, accurate and reliable online and/or portable mercury detection systems are needed. As discussed in this communication, resonating silicon-based cantilevers coated with thin films of gold change their resonant frequency when exposed to mercury vapors and could serve as the basis for such sensing devices. Two different types of commercial AFM cantilevers, which differed by physical dimensions and surface finish, were coated with a 10 nm film of gold and were tested in streams of argon containing mercury. The argon flow rates ranged from 5.7 to 57.4 ml/min, carrying mercury vapors at concentrations between 37 and 700 microg/m3. The results show that smaller cantilevers (approximately 140 microm x 40 microm x 4 microm) with a resonant frequency of 270-275 kHz were sensitive to less than 10 picograms of mercury, whereas larger cantilevers (approximately 245 microm x 50 microm x 7 microm) with a resonant frequency of 155-165 kHz have a sensitivity about 10 times lower. The results indicate that the kinetics of mercury capture by the gold coating follows a simple power law-correlation with the mass change (delta m) being proportional to t(n), where t is the capture time and n depends strongly on the concentration of mercury in the gas. It is also demonstrated that the mercury can be stripped off the gold coating by heating to 350 degrees C, which would allowthe cantilevers to be regenerated and reused.

Perlwapin, an abalone nacre protein with three four-disulfide core (whey acidic protein) domains, inhibits the growth of calcium carbonate crystals

We have isolated a new protein from the nacreous layer of the shell of the sea snail Haliotis laevigata (abalone). Amino acid sequence analysis showed the protein to consist of 134 amino acids and to contain three sequence repeats of approximately 40 amino acids which were very similar to the well-known whey acidic protein domains of other proteins. The new protein was therefore named perlwapin. In addition to the major sequence, we identified several minor variants. Atomic force microscopy was used to explore the interaction of perlwapin with calcite crystals. Monomolecular layers of calcite crystals dissolve very slowly in deionized water and recrystallize in supersaturated calcium carbonate solution. When perlwapin was dissolved in the supersaturated calcium carbonate solution, growth of the crystal was inhibited immediately. Perlwapin molecules bound tightly to distinct step edges, preventing the crystal layers from growing. Using lower concentrations of perlwapin in a saturated calcium carbonate solution, we could distinguish native, active perlwapin molecules from denaturated ones. These observations showed that perlwapin can act as a growth inhibitor for calcium carbonate crystals in saturated calcium carbonate solution. The function of perlwapin in nacre growth may be to inhibit the growth of certain crystallographic planes in the mineral phase of the polymer/mineral composite nacre.

Probing the machinery of intracellular trafficking with the atomic force microscope

Atomic force microscopy has emerged as a powerful tool for characterizing single biological macromolecules, macromolecular assemblies, and whole cells in aqueous buffer, in real time, and at molecular-scale spatial and force resolution. Many of the central elements of intracellular transport are tens to hundreds of nanometers in size and highly dynamic. Thus, atomic force microscopy provides a valuable means of addressing questions of structure and mechanism in intracellular transport. We begin this review of recent efforts to apply atomic force microscopy to problems in intracellular transport by discussing the technical principles behind atomic force microscopy. We then turn to three specific areas in which atomic force microscopy has been applied to problems with direct implications for intracellular trafficking: cytoskeletal structure and dynamics, vesicular transport, and receptor-ligand interactions. In each case, we discuss studies which use both intact cellular elements and reconstituted models. While many technical challenges remain, these studies point to several areas where atomic force microscopy can be used to provide valuable insight into intracellular transport at exquisite spatial and energetic resolution.

Direct observation of different surface structures on high-resolution images of native halorhodopsin

Halorhodopsin (HR) was investigated with atomic force microscopic techniques (AFM) in aqueous solution. Two-dimensional (2D) crystals of HR were obtained by purifying an HR membrane fraction with the same buoyant density as the purple membrane (HR-PM) from the overexpressing strain Halobacterium salinarum D2. The membrane patches of HR were immobilized on mica. Images with a resolution up to 14 A were recorded. Crystals showed an orthogonal structure and the orientation of the molecules showed p42(1)2 symmetry; thus, alternate tetramers are inverted in the membrane. The crystal surface was found to display different structures depending on the imaging force used, indicating that some parts of the HR molecule are more rigid but others more compressible. From samples with single tetramers missing in the crystalline patches dimensions of the unit cell could be determined. Helix-connecting loops in single molecules of halorhodopsin were assigned. The images indicate that the large extracellular BC loop covers the whole molecule and is very flexible.