Challenges in microbial fuel cell development and operation

Prevalence of Escherichia coli in electrogenic biofilm on activated carbon in microbial fuel cell

For a better understanding of the distribution of depth-dependent electrochemically active bacteria at in the anode zone, a customized system in a microbial fuel cell (MFC) packed with granular activated carbon (GAC) was developed and subsequently optimized via electrochemical tests. The constructed MFC system was sequentially operated using two types of matrice solutions: artificially controlled compositions (i.e., artificial wastewater, AW) and solutions obtained directly from actual sewage-treating municipal plants (i.e., municipal wastewater, MW). Notably, significant difference(s) of system efficiencies between AW or MW matrices were observed via performance tests, in that the electricity production capacity under MW matrices is < 25% that of the AW matrices. Interestingly, species of Escherichia coli (E. coli) sampled from the GAC bed (P1: deeper region in GAC bed, P2: shallow region of GAC near electrolytes) exhibited an average relative abundance of 75 to 90% in AW and a relative abundance of approximately 10% in MW, while a lower relative abundance of E. coli was found in both the AW and MW anolyte samples (L). Moreover, similar bacterial communities were identified in samples P1 and P2 for both the AW and MW solutions, indicating a comparable distribution of bacterial communities over the anode area. These results provide new insights into E. coli contribution in power production for the GAC-packed MFC systems (i.e., despite the low contents of Geobacter (> 8%) and Shewanella (> 1%)) for future applications in sustainable energy research. KEY POINTS: • A microbial community analysis for depth-dependence in biofilm was developed. • The system was operated with two matrices; electrochemical performance was assessed. • E. coli spp. was distinctly found in anode zone layers composed of activated carbon.

An Overview of Microbial Fuel Cell Technology for Sustainable Electricity Production

The over-exploitation of fossil fuels and their negative environmental impacts have attracted the attention of researchers worldwide, and efforts have been made to propose alternatives for the production of sustainable and clean energy. One proposed alternative is the implementation of bioelectrochemical systems (BESs), such as microbial fuel cells (MFCs), which are sustainable and environmentally friendly. MFCs are devices that use bacterial activity to break down organic matter while generating sustainable electricity. Furthermore, MFCs can produce bioelectricity from various substrates, including domestic wastewater (DWW), municipal wastewater (MWW), and potato and fruit wastes, reducing environmental contamination and decreasing energy consumption and treatment costs. This review focuses on recent advancements regarding the design, configuration, and operation mode of MFCs, as well as their capacity to produce bioelectricity (e.g., 2203 mW/m2) and fuels (i.e., H2: 438.7 mg/L and CH4: 358.7 mg/L). Furthermore, this review highlights practical applications, challenges, and the life-cycle assessment (LCA) of MFCs. Despite the promising biotechnological development of MFCs, great efforts should be made to implement them in a real-time and commercially viable manner.

Early career scientists converse on the future of soft robotics

During the recent decade, we have witnessed an extraordinary flourishing of soft robotics. Rekindled interest in soft robots is partially associated with the advances in manufacturing techniques that enable the fabrication of sophisticated multi-material robotic bodies with dimensions ranging across multiple length scales. In recent manuscripts, a reader might find peculiar-looking soft robots capable of grasping, walking, or swimming. However, the growth in publication numbers does not always reflect the real progress in the field since many manuscripts employ very similar ideas and just tweak soft body geometries. Therefore, we unreservedly agree with the sentiment that future research must move beyond "soft for soft's sake." Soft robotics is an undoubtedly fascinating field, but it requires a critical assessment of the limitations and challenges, enabling us to spotlight the areas and directions where soft robots will have the best leverage over their traditional counterparts. In this perspective paper, we discuss the current state of robotic research related to such important aspects as energy autonomy, electronic-free logic, and sustainability. The goal is to critically look at perspectives of soft robotics from two opposite points of view provided by early career researchers and highlight the most promising future direction, that is, in our opinion, the employment of soft robotic technologies for soft bio-inspired artificial organs.

High concentration of ammonia sensitizes the response of microbial electrolysis cells to tetracycline

Microbial electrolysis cell (MEC) is a promising technology for effective energy conversion of wastewater organics to biogas. Yet, in swine wastewater treatment, the complex contaminants including antibiotics may affect MEC performance, while the high ammonia concentration might increase this risk by increasing cell membrane permeability. In this work, the responses of MECs on tetracycline (TC) with low and high ammonia loadings (80 and 1000 mg L^-1) were fully investigated. The TC of 0 to 1 mg L^-1 slightly improved MEC performance in current production and electrochemical characteristics with low ammonia loading, while TC ≥ 4 mg L^-1 started to show negative effects. Generally, the high ammonia loading sensitized MECs to TC concentration, inducing the current and COD removal of MECs to sharply decline with TC ≥ 0.5 mg L^-1. The positive effect of high ammonia loading on MEC due to conductivity increase was counteracted with TC ≥ 1 mg L^-1. The co-contamination of TC and ammonia significantly decreased the bioactivity and biomass of anode biofilm. Although the high concentration of co-existing TC and ammonia inhibited MEC performance, the reactors still obtained positive energy feedback. The network analyses indicated that the effluent suspension contributed much to antibiotic resistance gene (ARG) transmission, while the microplastics (MPs) in wastewater greatly raised the risks of ARGs spreading. This work systematically examined the synergetic effects of TC and ammonia and the transmission of ARGs in MEC operation, which is conducive to expediting the application of MECs in swine wastewater treatment.

A techno-economic approach for eliminating dye pollutants from industrial effluent employing microalgae through microbial fuel cells: Barriers and perspectives

Microbial fuel cells are biochemical factories which besides recycling wastewater are electricity generators, if their low power density can be scaled up. This also adds up to work on many factors responsible to increase the cost of running a microbial fuel cell. As a result, the first step is to use environment friendly dead organic algae biomass or even living algae cells in a microbial fuel cell, also referred to as microalgal microbial fuel cells. This can be a techno-economic aspect not only for treating textile wastewater but also an economical way of obtaining value added products and bioelectricity from microalgae. Besides treating wastewater, microalgae in its either form plays an essential role in treating dyes present in wastewater which essentially include azo dyes rich in synthetic ions and heavy metals. Microalgae require these metals as part of their metabolism and hence consume them throughout the integration process in a microbial fuel cell. In this review a detail plan is laid to discuss the treatment of industrial effluents (rich in toxic dyes) employing microbial fuel cells. Efforts have been made by researchers to treat dyes using microbial fuel cell alone or in combination with catalysts, nanomaterials and microalgae have also been included. This review therefore discusses impact of microbial fuel cells in treating wastewater rich in textile dyes its limitations and future aspects.

Meta-analysis of operational performance and response metrics of microbial fuel cells (MFCs) fed with complex food waste

This study reports on a meta-analysis covering the impact of design and operating factors on published MFC performance data to inform MFC research and implementations. Factors of substrate composition, operating phase, electrode material, configuration, and pre-treatments employed were considered. The meta-analysis results indicate that dual-chamber MFCs overall achieve 18% higher COD removal and 73% higher coulombic efficiencies over that of single-chamber MFCs. MFCs using a solid operating phase achieved ˃38% higher coulombic efficiencies than those using a liquid operating phase. Statistical analyses comparing brush vs flat surface anodes revealed that brush anodes can achieve 130% higher power density than flat surface anodes. The use of a platinum catalyst was found to improve power density, as opposed to catalyst-free cathodes. However, coulombic efficiency is less likely to be influenced by the catalyst used and more likely to be dependent on the inclusion of a membrane separator. The meta-analysis results indicate that even in the presence of expensive catalysts like platinum, membrane separators are of prime importance to maintain a stable MFC operation on a long-term basis and achieve high coulombic efficiency in an MFC. Results presented in this paper outline the impact of MFC design choices on performance and can be used to guide future MFC research. These findings can be beneficial for municipalities as it provides a pathway for future MFC design and optimization by analyzing critical associations between MFC response parameters and multiple varying factors.

Integration of microbial electrochemical systems and photocatalysis for sustainable treatment of organic recalcitrant wastewaters: Main mechanisms, recent advances, and present prospects

In recent years, microbial electrochemical systems (MESs) have demonstrated to be an environmentally friendly technology for wastewater treatment and simultaneous production of value-added products or energy. However, practical applications of MESs for the treatment of recalcitrant wastewater are limited by their low power output and slow rates of pollutant biodegradation. As a novel technology, hybrid MESs integrating biodegradation and photocatalysis have shown great potential to accelerate the degradation of bio-recalcitrant pollutants and increase the system output. In this review, we summarize recent advances of photo-assisted MESs for enhanced removal of recalcitrant pollutants, and present further discussion about the synergistic effect of biodegradation and photocatalysis. In addition, we analyse in detail different set-up configurations, discuss mechanisms of photo-enhanced extracellular electron transfer, and briefly present ongoing research cases. Finally, we highlight the current limitations and corresponding research gaps, and propose insights for future research.

3D Conducting Polymeric Membrane and Scaffold Saccharomyces cerevisiae Biofilms to Enhance Energy Conversion in Microbial Fuel Cells

Microbial fuel cells (MFCs) can spontaneously convert chemical energy into electricity using biocatalytic microorganisms and organic matter as fuel feedstocks. Three-dimensional cross-linked poly(vinyl alcohol)-based membranes were produced by a sol-gel method under homogeneous catalysis and used as the electrolyte to facilitate effective proton conduction. Under dry conditions, these polymeric membranes showed high water uptake (120%) and ionic conductivity (2.815 mS cm^-1). In the anode compartment, the scaffold Saccharomyces cerevisiae film biocatalysts were used to improve electron transfer to the cathode, using three major configurations to generate a higher power output. It was found that the graphene anchoring, red light (RL) stimulation, and methylene blue (MB) mediation-enhanced device performance. The electrochemically derived graphene improved the power and current density by 40% because of its high conductivity. The RL stimulation increased the power density by 80% because of a shortened electron flow path to complex III. The MB mediation also yielded a higher current density by 340% because MB can bypass the electron flow from complex II to cytochrome c and transfer electrons directly to complex III. The individual and collective increase in power output was due to more efficient electron flow from the electronic network permeating the biofilm. The generated electrons were transferred either to graphene as an energy-efficient direct transfer mode or to methylene blue as a long-range redox mediator for indirect transfer. Red light stimulation enhanced oxygen utilization efficiency and stimulated electrons in redox proteins enhancing electron flux. These processes generated higher power through the more efficient generation of electrons and faster transport to the external circuit. As society migrates from gasoline consumption to low carbon-based fuels, the MFCs become important in producing electrical energy with low net emissions.

A Short Overview of Biological Fuel Cells

This short review summarizes the improvements on biological fuel cells (BioFCs) with or without ionomer separation membrane. After a general introduction about the main challenges of modern energy management, BioFCs are presented including microbial fuel cells (MFCs) and enzymatic fuel cells (EFCs). The benefits of BioFCs include the capability to derive energy from waste-water and organic matter, the possibility to use bacteria or enzymes to replace expensive catalysts such as platinum, the high selectivity of the electrode reactions that allow working with less complicated systems, without the need for high purification, and the lower environmental impact. In comparison with classical FCs and given their lower electrochemical performances, BioFCs have, up to now, only found niche applications with low power needs, but they could become a green solution in the perspective of sustainable development and the circular economy. Ion exchange membranes for utilization in BioFCs are discussed in the final section of the review: they include perfluorinated proton exchange membranes but also aromatic polymers grafted with proton or anion exchange groups.

Sustainable strategy on microbial fuel cell to treat the wastewater for the production of green energy

Microbial fuel cell (MFC) is one of the promising alternative energy systems where the catalytic conversion of chemical energy into electrical energy takes places with the help of microorganisms. The basic configuration of MFC consists of three major components such as electrodes (anode and cathode), catalyst (microorganism) and proton transport/exchange membrane (PEM). MFC classified into four types based on the substrate utilized for the catalytic energy conversion process such as Liquid-phase MFC, Solid-phase MFC, Plant-MFC and Algae-MFC. The core performance of MFC is organic substrate oxidation and electron transfer. Microorganisms and electrodes are the key factors that decide the efficiency of MFC system for electricity generation. Microorganism catalysis degradation of organic matters and assist the electron transfer to anode surface, the conductivity of anode material decides the rate of electron transport to cathode through external circuit where electrons are reduced with hydrogen and form water with oxygen. Not limited to electricity generation, MFC also has diverse applications in different sectors including wastewater treatment, biofuel (biohydrogen) production and used as biosensor for detection of biological oxygen demand (BOD) of wastewater and different contaminants concentration in water. This review explains different types of MFC systems and their core performance towards energy conversion and waste management. Also provides an insight on different factors that significantly affect the MFC performance and different aspects of application of MFC systems in various sectors. The challenges of MFC system design, operations and implementation in pilot scale level and the direction for future research are also described in the present review.

Sustainable bioelectricity generation using Cladophora sp. as a biocathode in membrane-less microbial fuel cell

In this study, the Cladophora sp. is used to provide oxygen to the cathode of the photosynthetic biocathode membrane-less microbial fuel cell (PB-MLMFC). Non-aerated (NA-MLMFC) and mechanically-aerated (MA-MLMFC) MLMFCs are operated under similar operating conditions to evaluate the performance of PB-MLMFC with the presence of Cladophora sp. The PB-MLMFC exhibits the highest dissolved oxygen (DO) concentration, which results in a more efficient oxygen reduction reaction and a significant improvement in the electricity generation performance. The maximum power density of PB-MLMFC is 619.1 mW m^-2, which is the highest power density known to be reported for algal cathode MFCs in the literature. The electrochemical analysis shows that theCladophora sp.reduces the charge (R_ct) and mass transfer (R_mt) resistances of the PB-MLMFC, and improves the bioelectrochemical activity of the anode microorganisms. The study reveals that Cladophora sp. provides a cost-effective and renewable approach for practical applications of MLMFCs.

Development of trickling bio-electrochemical reactor (TrickBER) for large scale energy efficient wastewater treatment

Bioelectrochemical systems such as microbial fuel cells are novel systems; those directly transform the chemical energy contained in organics of wastewater into electrical energy by the metabolic action of the microbial community. During the last two decades, bioelectrochemical systems astonishingly increased their wastewater treatment capabilities, sustainability, and power output. However, studies on scalable architectural designs of bioelectrochemical systems received less attention. Lower power yield and high cost are two major limitations for scaling up of bioelectrochemical systems. This study reports a low cost, scalable, air cathode bio-electrochemical reactor, constructed by adopting a trickling filtration approach (TrickBER) and operated in continuous mode. Various facets of construction, installation, and operation of TrickBER were investigated and optimized to achieve an efficient performance. TrickBER was found suitable in simultaneous electricity generation during continuous wastewater treatment and, in the future, could be used in small/cottage industries.

Microbial Fuel Cell for Energy Production, Nutrient Removal and Recovery from Wastewater: A Review

The world is facing serious threats from the depletion of non-renewable energy resources, freshwater shortages and food scarcity. As the world population grows, the demand for fresh water, energy, and food will increase, and the need for treating and recycling wastewater will rise. In the past decade, wastewater has been recognized as a resource as it primarily consists of water, energy-latent organics and nutrients. Microbial fuel cells (MFC) have attracted considerable attention due to their versatility in their applications in wastewater treatment, power generation, toxic pollutant removal, environmental monitoring sensors, and more. This article provides a review of MFC technologies applied to the removal and/or recovery of nutrients (such as P and N), organics (COD), and bioenergy (as electricity) from various wastewaters. This review aims to provide the current perspective on MFCs, focusing on the recent advancements in the areas of nutrient removal and/or recovery with simultaneous power generation.

Experimental and validation with neural network time series model of microbial fuel cell bio-sensor for phenol detection

Phenol is one of the most commonly known chemical compound found as a pollutant in the chemical industrial wastewater. This pollutant has potential threat for human health and environment, as it can be easily absorbed by the skin and the mucous. Here, we prepared dual chambered microbial fuel cell (MFC) sensor for the detection of phenol. Varying concentration of phenol (100 mg/l, 250 mg/l, 500 mg/l, and 1000 mg/l) was applied as a substrate to the MFC and their change in output voltage was also measured. After adding 100 mg/l, 250 mg/l, 500 mg/l, and 1000 mg/l of phenol as sole substrate to the MFC, the maximum voltage output was obtained as 360 ± 10 mV, 395 ± 8 mV, 320 ± 7 mV, 350 ± 5 mV respectively. This biosensor was operated using industrial wastewater isolated microbes as a sensing element and phenol was used as a sole substrate. The topologies of ANN were analyzed to get the best model to predict the power output of MFCs and the training algorithms were compared with their convergence rates in training and test results. Time series model was used for regression analysis to predict the future values based on previously observed values. Two types of mathematical modeling i.e. Scaled Conjugate Gradient (SCG) algorithm and Time-series model was used with 44 experimental data with varying phenol concentration and varying synthetic wastewater concentration to optimize the biosensor performance. Both SCG and time series showing the best results with R² value 0.98802 and 0.99115.

Proton exchange membrane and bio-Fenton micro fuel cells for energy harvesting, gas leakage detection, and dye degradation

The present work focuses on the non-conventional design and operation of micro fuel cells. Two different kinds of fuel cells, Proton Exchange Membrane (PEM) and Biological Fenton (BF) based fuel cells, are fabricated to harvest energy. For the PEM fuel cell, H2 and O2 are generated by Mg/HCl reaction and Fenton's reaction respectively, and are subsequently fed into two terminals of the PEM fuel cell. For the BF fuel cell, the reaction product of hemoglobin (Hb) with hydrogen peroxide (H2O2) is used as a source of chemical fuel to generate electrical energy within the fuel cell. An array of PEM microscale fuel cells is fabricated to scale up the reaction which can be used for MEMS/NEMS applications. Furthermore, the application of this adhesive and flexible PEM fuel cell as a hydrogen leakage sensor is demonstrated. In the BF fuel cell, an electronic imbalance across a carbon tape is generated owing to the formation of reactive hydroxyl radicals and concurrent electrons in the system. The generation of a highly oxidizing hydroxyl radical is also utilized to degrade Methylene Blue (MB) dye along with energy harvesting. This multi-purpose fuel cell can be synergistically used in industrial applications of waste treatment as well as energy production.

Evaluation of a continuous flow microbial fuel cell for treating synthetic swine wastewater containing antibiotics

Microbial fuel cell (MFC) systems are promising technologies for wastewater treatment and renewable energy generation simultaneously. Performance of a double-chamber microbial fuel cell (MFC) to treat synthetic swine wastewater containing sulfonamide antibiotics (SMs) was evaluated in this study. The MFC was operated in continuous modes at different conditions. Results indicated that the current was successfully generated during the operation. The performance of MFC under the sequential anode-cathode operating mode is better than that under the single continuous running mode. Specifically, higher removal efficiency of chemical oxygen demand (>90%) was achieved under the sequential anode-cathode operating mode in comparison with that in the single continuous mode (>80%). Nutrients were also be removed in the MFC's cathode chamber with the maximum removal efficiency of 66.6 ± 1.4% for NH₄⁺-N and 32.1 ± 2.8% for PO₄^3--P. Meanwhile, SMs were partly removed in the sequential anode-cathode operating with the value in a range of 49.4%-59.4% for sulfamethoxazole, 16.8%-19.5% for sulfamethazine and 14.0%-16.3% for sulfadiazine, respectively. SMs' inhibition to remove other pollutants in both electrodes of MFC was observed after SMs exposure, suggesting that SMs exert toxic effects on the microorganisms. A positive correlation was found between the higher NH₄⁺-N concentration used in this study and the removal efficiency of SMs in the cathode chamber. In short, although the continuous flow MFC is feasible for treating swine wastewater containing antibiotics, its removal efficiency of antibiotics requires to be further improved.

An overview of microbial fuel cell usage in wastewater treatment, resource recovery and energy production

Wastewater treatment is a high-cost and energy-intensive process not only due to large amounts of pollutants but also for the large volumes of water to be treated, which are mainly generated by human activities and different industries. In this regard, biological wastewater treatments have become substitutes to the current technologies, owing to the improved treatment efficiency and added value. Microbial fuel cells (MFCs) as one of the promising biological treatments have arisen as a viable solution for chemical oxygen demand (COD) removal and electricity generation simultaneously. Therefore, in this article, the effects of various operating conditions on the COD removal and power production from MFCs are thoroughly discussed. In addition, the advantages and weaknesses of current MFCs technologies used for different types of wastewater are summarized. Finally, the technical barriers facing by MFCs operation and the economic feasibility of using MFCs for wastewater treatment are provided.

A Comprehensive Review on Energy Storage Systems: Types, Comparison, Current Scenario, Applications, Barriers, and Potential Solutions, Policies, and Future Prospects

Driven by global concerns about the climate and the environment, the world is opting for renewable energy sources (RESs), such as wind and solar. However, RESs suffer from the discredit of intermittency, for which energy storage systems (ESSs) are gaining popularity worldwide. Surplus energy obtained from RESs can be stored in several ways, and later utilized during periods of intermittencies or shortages. The idea of storing excess energy is not new, and numerous researches have been conducted to adorn this idea with innovations and improvements. This review is a humble attempt to assemble all the available knowledge on ESSs to benefit novice researchers in this field. This paper covers all core concepts of ESSs, including its evolution, elaborate classification, their comparison, the current scenario, applications, business models, environmental impacts, policies, barriers and probable solutions, and future prospects. This elaborate discussion on energy storage systems will act as a reliable reference and a framework for future developments in this field. Any future progress regarding ESSs will find this paper a helpful document wherein all necessary information has been assembled.

Simultaneous wastewater treatment and energy harvesting in microbial fuel cells: an update on the biocatalysts

The development of microbial fuel cell (MFC) makes it possible to generate clean electricity as well as remove pollutants from wastewater. Extensive studies on MFC have focused on structural design and performance optimization, and tremendous advances have been made in these fields. However, there is still a lack of systematic analysis on biocatalysts used in MFCs, especially when it comes to pollutant removal and simultaneous energy recovery. In this review, we aim to provide an update on MFC-based wastewater treatment and energy harvesting research, and analyze various biocatalysts used in MFCs and their underlying mechanisms in pollutant removal as well as energy recovery from wastewater. Lastly, we highlight key future research areas that will further our understanding in improving MFC performance for simultaneous wastewater treatment and sustainable energy harvesting.

Controlling Voltage Reversal in Microbial Fuel Cells

Microbial fuel cell (MFC) systems have been developed for potential use as power sources, along with several other applications, with bacteria as the prime factor enabling electrocatalytic activity. Limited voltage and current production from unit cells limit their practical applicability, so stacking multiple MFCs has been proposed as a way to increase power production. Special attention is paid to voltage reversal (VR), a common occurrence in stacked MFCs, and to identifying the mechanisms underlying this phenomenon. We also proposed realistic perspectives on stacked MFCs in an effort to control and suppress VR by balancing the kinetics in the system, such as using enriched electroactive microorganisms or altering the circuitry mode.

Enzymatic biofuel cells based on protein engineering: recent advances and future prospects

Enzymatic biofuel cells (EBFCs), as one of the most promising sustainable and green energy sources, have attracted significant interest.

Electricigens in the anode of microbial fuel cells: pure cultures versus mixed communities

Microbial fuel cell (MFC) is an environmentally friendly technology for electricity harvesting from a variety of substrates. Microorganisms used as catalysts in the anodic chamber, which are termed as electricigens, play a major role in the operation of MFCs. This review provides an introduction to the currently identified electricigens on their taxonomical groups and electricity producing abilities. The mechanism of electron transfer from electricigens to electrode is highlighted. The performances of pure culture and mixed communities are compared particularly. It has been proved that the electricity generation capacity and the ability to adapt to the complex environment of MFC systems constructed by pure microbial cultures are less than the systems constructed by miscellaneous consortia. However, pure cultures are useful to clarify the electron transfer mechanism at the microbiological level and further reduce the complexity of mixed communities. Future research trends of electricigens in MFCs should be focused on screening, domestication, modification and optimization of multi-strains to improve their electrochemical activities. Although the MFC techniques have been greatly advanced during the past few years, the present state of this technology still requires to be combined with other processes for cost reduction.

Biohybrid Cathode in Single Chamber Microbial Fuel Cell

The aim of this work is to investigate the properties of biofilms, spontaneously grown on cathode electrodes of single-chamber microbial fuel cells, when used as catalysts for oxygen reduction reaction (ORR). To this purpose, a comparison between two sets of different carbon-based cathode electrodes is carried out. The first one (Pt-based biocathode) is based on the proliferation of the biofilm onto a Pt/C layer, leading thus to the creation of a biohybrid catalyst. The second set of electrodes (Pt-free biocathode) is based on a bare carbon-based material, on which biofilm grows and acts as the sole catalyst for ORR. Linear sweep voltammetry (LSV) characterization confirmed better performance when the biofilm is formed on both Pt-based and Pt-free cathodes, with respect to that obtained by biofilm-free cathodes. To analyze the properties of spontaneously grown cathodic biofilms on carbon-based electrodes, electrochemical impedance spectroscopy is employed. This study demonstrates that the highest power production is reached when aerobic biofilm acts as a catalyst for ORR in synergy with Pt in the biohybrid cathode.

Quick start-up and performance of microbial fuel cell enhanced with a polydiallyldimethylammonium chloride modified carbon felt anode

It is of significant importance to simultaneously shorten the start-up time and enhance the electricity generation performance for practical application of microbial fuel cell (MFC). In this paper, the polydiallyldimethylammonium chloride (PDDA) modified carbon felt (PDDA-CF) electrode was prepared and used as the anode of PDDA-MFC. The anode significantly enhanced the start-up speed and electricity generation and dye wastewater degradation performances of the PDDA-MFC. The start-up time of PDDA-MFC is only 9 h, which is only 7.5% that of the unmodified carbon felt anode MFC (CF-MFC). The charge transfer resistance, the maximum output voltage and the maximum output power density of PDDA-MFC were 9.7 Ω, 741 mV and 537.8 mW m^-2 respectively, which were 70.3% lower than, 1.7 times and 3.3 times greater than those of CF-MFC respectively. In addition, the color and chemical oxygen demand (COD) removal rates of Reactive Brilliant Red X-3B for PDDA-MFC reached 95.94% and 64.24% at 24 h respectively, which were 41.5% and 51.2% higher than those of CF-MFC respectively. Due to the electrostatic attraction of PDDA, the adhesion and metabolic mass transfer rate of exoelectrogens are accelerated, thus the PDDA-CF electrode has excellent electrochemical properties and bio-affinity. This paper provides a new idea to enhance the start-up speed and performance of MFC simultaneously.

Biosensors based on lithotrophic microbial fuel cells in relation to heterotrophic counterparts: research progress, challenges, and opportunities

Biosensors based on the microbial fuel cell (MFC) platform have been receiving increasing attention from researchers owing to their unique properties. The lithotrophic MFC, operated with a neutrophilic iron-oxidizing bacterial community, has recently been developed and proposed to be used as a biosensor to detect iron, and likely metals in general, in water samples. Therefore, in this review, important aspects of the lithotrophic MFC-based biosensor, including its configuration, fabrication, microbiology, electron transfer mechanism, sensing performance, etc. were carefully discussed in comparison with those of heterotrophic (organotrophic) counterparts. Particularly, the challenges for the realization of the practical application of the device were determined. Furthermore, the application potentials of the device were also considered and positioned in the context of technologies for metal monitoring and bioremediation.

Microbial electrocatalysis: Redox mediators responsible for extracellular electron transfer

Redox mediator plays an important role in extracellular electron transfer (EET) in many environments wherein microbial electrocatalysis occurs actively. Because of the block of cell envelope and the low difference of redox potential between the intracellular and extracellular surroundings, the proceeding of EET depends mainly on the help of a variety of mediators that function as an electron carrier or bridge. In this Review, we will summarize a wide range of redox mediators and further discuss their functional mechanisms in EET that drives a series of microbial electrocatalytic reactions. Studying these mediators adds to our knowledge of how charge transport and electrochemical reactions occur at the microorganism-electrode interface. This understanding would promote the widespread applications of microbial electrocatalysis in microbial fuel cells, bioremediation, bioelectrosynthesis, biomining, nanomaterial productions, etc. These improved applications will greatly benefit the sustainable development of the environmental-friendly biochemical industries.

Iron-Nicarbazin derived platinum group metal-free electrocatalyst in scalable-size air-breathing cathodes for microbial fuel cells

In this work, a platinum group metal-free (PGM-free) catalyst based on iron as transitional metal and Nicarbazin (NCB) as low cost organic precursor was synthesized using Sacrificial Support Method (SSM). The catalyst was then incorporated into a large area air-breathing cathode fabricated by pressing with a large diameter pellet die. The electrochemical tests in abiotic conditions revealed that after a couple of weeks of successful operation, the electrode experienced drop in performances in reason of electrolyte leakage, which was not an issue with the smaller electrodes. A decrease in the hydrophobic properties over time and a consequent cathode flooding was suspected to be the cause. On the other side, in the present work, for the first time, it was demonstrated the proof of principle and provided initial guidance for manufacturing MFC electrodes with large geometric areas. The tests in MFCs showed a maximum power density of 1.85 W m^-2. The MFCs performances due to the addition of Fe-NCB were much higher compared to the iron-free material. A numerical model using Nernst-Monod and Butler-Volmer equations were used to predict the effect of electrolyte solution conductivity and distance anode-cathode on the overall MFC power output. Considering the existing conditions, the higher overall power predicted was 3.6 mW at 22.2 S m^-1 and at inter-electrode distance of 1 cm.

FeS2 Nanoparticles Decorated Graphene as Microbial-Fuel-Cell Anode Achieving High Power Density

Microbial fuel cells (MFCs) have received great attention worldwide due to their potential in recovering electrical energy from waste and inexhaustible biomass. Unfortunately, the difficulty of achieving the high power, especially in real samples, remains a bottleneck for their practical applications. Herein, FeS₂ nanoparticles decorated graphene is fabricated via a simple hydrothermal reaction. The FeS₂ nanoparticles decorated graphene anode not only benefits bacterial adhesion and enrichment of electrochemically active Geobacter species on the electrode surface but also promotes efficient extracellular electron transfer, thus giving rise to a fast start-up time of 2 d, an unprecedented power density of 3220 mW m^-2 and a remarkable current density of 3.06 A m^-2 in the acetate-feeding and mixed bacteria-based MFCs. Most importantly, the FeS₂ nanoparticles decorated graphene anode successfully achieves a power density of 310 mW m^-2 with simultaneous removal of 1319 ± 28 mg L^-1 chemical oxygen demand in effluents from a beer factory wastewater. The characteristics of improved power generation and enhanced pollutant removal efficiency opens the door toward development of high-performance MFCs via rational anode design for practical application.

Enhancement of microbial fuel cell performance by introducing a nano-composite cathode catalyst

Iron aminoantipyrine (Fe-AAPyr), graphene nanosheets (GNSs) derived catalysts and their physical mixture Fe-AAPyr-GNS were synthesized and investigated as cathode catalysts for oxygen reduction reaction (ORR) with the activated carbon (AC) as a baseline. Fe-AAPyr catalyst was prepared by Sacrificial Support Method (SSM) with silica as a template and aminoantipyrine (AAPyr) as the organic precursor. 3D-GNS was prepared using modified Hummers method technique. The Oxygen Reduction Reaction (ORR) activity of these catalysts at different loadings was investigated by using rotating ring disk (RRDE) electrode setup in the neutral electrolyte. The performance of the catalysts integrated into air-breathing cathode was also investigated. The co-presence of GNS (2 mg cm⁻²) and Fe-AAPyr (2 mg cm⁻²) catalyst within the air-breathing cathode resulted in the higher power generation recorded in MFC of 235 ± 1 μW cm⁻². Fe-AAPyr catalyst itself showed high performance (217 ± 1 μW cm⁻²), higher compared to GNS (150 ± 5 μW cm⁻²) while AC generated power of roughly 104 μW cm⁻².

•

Fe-AAPyr and GNS were synthesized and characterized.

•

Rotating ring disk electrode (RRDE) setup was performed in the neutral electrolyte.

•

Fe-AAPyr had higher half wave potential and lower H₂O₂ production.

•

The combination of Fe-AAPyr and GNS led to a power generation of 235 ± 1 μWcm⁻².

•

Both Fe-AAPyr and GNS outperformed compared to activated carbon control.

Effects of process operating conditions on the autotrophic denitrification of nitrate-contaminated groundwater using bioelectrochemical systems

Nitrates have been detected in groundwater worldwide, and their presence can lead to serious groundwater use limitations, especially because of potential health problems. Amongst different options for their removal, bioelectrochemical systems (BESs) have achieved promising results; in particular, attention has raised on BES-driven autotrophic denitrification processes. In this work, the performance of a microbial electrolysis cell (MEC) for groundwater autotrophic denitrification, is assessed in different conditions of nitrate load, hydraulic retention time (HRT) and process configuration. The system obtained almost complete nitrate removal under all conditions, while nitrite accumulation was recorded at nitrate loads higher than 100mgNO₃^-L^-1. The MEC system achieved, in different tests, a maximum nitrate removal rate of 62.15±3.04gNO₃^--Nm^-3d^-1, while the highest TN removal rate observed was 35.37±1.18gTNm^-3d^-1. Characteristic of this process is a particularly low (in comparison with other reported works) energy consumption: 3.17·10^-3±2.26·10^-3kWh/gNO₃^-N removed and 7.52·10^-2±3.58·10^-2kWhm^-3 treated. The anolyte configuration in closed loop allowed the process to use less clean water, while guaranteeing identical performances as in other conventional configurations.

Assisting cultivation of photosynthetic microorganisms by microbial fuel cells to enhance nutrients recovery from wastewater

Spirulina was cultivated in cathodic compartments of photo-microbial fuel cells (P-MFC). Anodic compartments were fed with swine-farming wastewater, enriched with sodium acetate (2.34g_CODL^-1). Photosynthetic oxygen generation rates were sufficient to sustain cathodic oxygen reduction, significantly improving P-MFC electrochemical performances, as compared to water-cathode control experiments. Power densities (0.8-1Wm^-2) approached those of air-cathode MFCs, run as control. COD was efficiently removed and only negligible fractions leaked to the cathodic chamber. Spirulina growth rates were comparable to those of control (MFC-free) cultures, while pH was significantly (0.5-1unit) higher in P-MFCs, due to cathodic reactions. Alkaliphilic photosynthetic microorganisms like Spirulina might take advantage of these selective conditions. Electro-migration along with diffusion to the cathodic compartment concurred for the recovery of most nutrients. Only P and Mg were retained in the anodic chamber. A deeper look into electro-osmotic mechanisms should be addressed in future studies.

Simulation and resolution of voltage reversal in microbial fuel cell stack

To understand the biotic and non-biotic contributions of voltage reversals in microbial fuel cell stacks (MFC) they were simulated with an electronic MFC-Stack mimic. The simulation was then compared with results from a real 3L triple MFC-Stack with shared anolyte. It showed that voltage reversals originate from the variability of biofilms, but also the external load plays a role. When similar biofilm properties were created on all anodes the likelihood of voltage reversals was largely reduced. Homogenous biofilms on all anodes were created by electrical circuit alternation and electrostimulation. Conversely, anolyte recirculation, or increased nutriment supply, postponed reversals and unfavourable voltage asymmetries on anodes persisted. In conclusion, voltage reversals are often a negative event but occur also in close to best MFC-Stack performance. They were manageable and this with a simplified MFC architecture in which multiple anodes share the same anolyte.

Response of microbial community structure to pre-acclimation strategies in microbial fuel cells for domestic wastewater treatment

Microbial community structures and performance of air-cathode microbial fuel cells (MFCs) inoculated with activated sludge from domestic wastewater were investigated to evaluate the effects of three substrate pre-acclimation strategies: 1, serial pre-acclimation with acetate and glucose before supplying domestic wastewater; 2, one step pre-acclimation with acetate before supplying domestic wastewater; and 3, direct supply of domestic wastewater without any pre-acclimation. Strategy 1 showed much higher current generation (1.4mA) and Coulombic efficiency (33.5%) than strategies 2 (0.7mA and 9.4%) and 3 (0.9mA and 10.3%). Pyrosequencing showed that microbial communities were significantly affected by pre-acclimation strategy. Although Proteobacteria was the dominant phylum with all strategies, Actinobacteria was abundant when MFCs were pre-acclimated with glucose after acetate. Not only anode-respiring bacteria (ARB) in the genus Geobacter but also non-ARB belonging to the family Anaerolinaceae seemed to play important roles in air-cathode MFCs to produce electricity from domestic wastewater.

Formation of novel hydrogel bio-anode by immobilization of biocatalyst in alginate/polyaniline/titanium-dioxide/graphite composites and its electrical performance

A new bio-anode containing gel-entrapped bacteria in alginate/polyaniline/TiO₂/graphite composites was constructed and electrically investigated. Alginate as dopant and template as well as entrapped gel was used for immobilization of microorganism cells. Increase of polyaniline concentration resulted an increase in the conductivity in gels. Addition of 0.01 and 0.02 g/mL polyaniline caused 6-fold and 10-fold higher conductivity, respectively. Furthermore, addition of 0.05 g/mL graphite powder caused 10-fold higher conductivity and 4-fold higher power density, respectively. The combination of polyaniline and graphite resulted 105-fold higher conductivity and 7-fold higher power-density output. Optimized concentrations of polyaniline and graphite powder were determined to be 0.02 g/mL and 0.05 g/mL, respectively. Modified hydrogel anode was successfully used in microbial fuel cell systems both in semi- and continuous operations modes. In semi-continuous mode, about 7.88 W/m³ power density was obtained after 13 h of fermentation. The glucose consumption rate was calculated to be about 7 mg glucose/h/1.2·10⁷ CFU immobilized cells. Similar power density was observed in the continuous operation mode of the microbial fuel cell, and it was operated stably for more than 7 days. Our results are very promising for development of an improved microbial fuel cell with new type of bio-anode that have higher power density and can operate for long term.

Arsenic treatment and power generation with a dual-chambered fuel cell with anionic and cationic membranes using NaHCO3 anolyte and HCl or NaCl catholyte

Dual-chambered fuel cells with an iron anode and an air-carbon cathode separated by an ion exchange membranes have been used to treat arsenate during power production. To select an effective catholyte, the dual-chambered fuel cell consisted 90 mL of 0.1 M HCl or 0.5 M NaCl as the catholyte and 1 L of 0.1 M NaHCO₃ as the anolyte at an initial pH 5. The 0.1 M HCl was an effective catholyte, with which 1 ppm arsenate in 1 L of anolyte was reduced to 5 ppb in 1 h, and the maximum power density was about 6.3 w/m² with an anion exchange membrane fuel cell (AEM_FC) and 4.4 w/m² with a cation exchange membrane fuel cell (CEM_FC). Therefore, 90 mL of 0.1 M HCl was used as a catholyte to treat 20 L of 0.1 M NaHCO₃ anolyte containing 1 ppm arsenate at an initial pH of 5 or 7. The arsenate level at pH 5 decreased to less than 5 ppb in 4 h, and the maximum power density was 5.9 W/m² and 4.7 W/m² with AEM_FC and CEM_FC, respectively. When using 0.01 M NaHCO₃ as the anolyte at pH 5, arsenate was reduced to less than 5 ppb in 8 and 24 h for AEC_FC and CEM_FC, respectively. However, when using an anolyte at pH 7, arsenate could not be effectively removed in 24 h. Therefore, when using carbonate as an anolyte, the solution should be adjusted to a weakly acidic pH in order to remove arsenate.