Biomethane production and microbial community response according to influent concentration of molasses wastewater in a UASB reactor

Enhancement of the start-up and performance of an upflow anaerobic sludge blanket (UASB) reactor using electrochemically-enriched biofilm

A novel approach was developed to accelerate the start-up of a 20-L UASB reactor under mesophilic conditions. Two runs were conducted, where the first run (Run I) was inoculated with anaerobic sludge, and the second run (Run II) was inoculated with the same sludge supplemented with enriched electro-active biofilms collected from the working and counter electrodes of anodic and cathodic bio-electrochemical systems (BESs). Reactors' performance and microbial dynamics were monitored over 41 days. Methane production in Run II exceeded 200 mL-CH4/g-COD within 10 days, compared to 29 days in Run I. Run II achieved 80 % removal of soluble COD after 13 days as compared to 23 days in Run I. Sludge washout in Run II stabilized after 3 days, achieving 70 % VSS removal, whereas Run I required 17 days. Greater extracellular polymeric substance (EPS) values and higher protein-to-polysaccharide ratios in Run II may indicate accelerated granules formation mediated by EPS. 16S rRNA gene sequencing analysis results revealed shared genera between both runs but different relative abundances. Methanothrix dominated in Run I, while other archaeal genera, mainly Methanosarcina and Methanobacterium increased in abundance in the Run II. The Enterobacteriaceae family was prevalent in both reactors, with three genera, Citrobacter, Klebsiella, and Enterobacter distinctly dominating at different time points, suggesting potential links with the initial seed sludge or enriched biofilm consortia. The addition of electrochemically grown biofilm in Run II likely enhanced the microbial diversity, contributed to the rapid development of granular syntrophic communities, and improved reactor performance.

Biomethane production and microbial strategies corresponding to high organic loading treatment for molasses wastewater in an upflow anaerobic filter reactor

Molasses wastewater contains high levels of organic compounds, cations, and anions, causing operational problems for anaerobic biological treatment. In this study, an upflow anaerobic filter (UAF) reactor was employed to establish a high organic loading treatment system for molasses wastewater and further investigated the microbial community dynamics in response to this stressful operation. The biogas production increased with an increase in total organic carbon (TOC) loading rate from 1.0 to 14 g/L/day, and then it decreased with further TOC loading rate addition until 16 g/L/day. The UAF reactor achieved a maximum biogas production of 6800 mL/L/day with a TOC removal efficiency of 66.5% at a TOC loading rate of 14 g/L/day. Further microbial analyses revealed that both the bacterial and archaeal communities developed multiple strategies to maintain stable operation of the reactor at high organic loading (e.g., Proteiniphilum and Defluviitoga maintained high abundances throughout the operation; Tissierella temporarily dominated the bacterial community at TOC loading rates of 8.0 to 14 g/L/day; and multi-trophic Methanosarcina shifted as the dominant methanogen at the TOC loading rates of 8.0 to 16 g/L/day). This study presents insights into a high organic loading molasses wastewater treatment system and the microbial flexibility in methane fermentation in response to process disturbances.

Bioprocesses for the recovery of bioenergy and value-added products from wastewater: A review

Wastewater and activated sludge present a major challenge worldwide. Wastewater generated from large and small-scale industries, laundries, human residential areas and other sources is emerging as a main problem in sanitation and maintenance of smart/green cities. During the last decade, different technologies and processes have been developed to recycle and purify the wastewater. Currently, identification and fundamental consideration of development of more advanced microbial-based technologies that enable wastewater treatment and simultaneous resource recovery to produce bioenergy, biofuels and other value-added compounds (organic acids, fatty acids, bioplastics, bio-pesticides, bio-surfactants and bio-flocculants etc.) became an emerging topic. In the last several decades, significant development of bioprocesses and techniques for the extraction and recovery of mentioned valuable molecules and compounds from wastewater, waste biomass or sludge has been made. This review presents different microbial-based process routes related to resource recovery and wastewater application for the production of value-added products and bioenergy. Current process limitations and insights for future research to promote more efficient and sustainable routes for this under-utilized and continually growing waste stream are also discussed.

Perspectives on microbial community in anaerobic digestion with emphasis on environmental parameters: A systematic review

This paper review is aiming to comprehensively identify and appraise the current available knowledge on microbial composition and microbial dynamics in anaerobic digestion with focus on the interconnections between operational parameters and microbial community. We systematically searched Scopus, Web of Science, pubmed and Embase (up to August 2019) with relative keywords to identify English-language studies published in peer-reviewed journals. The data and information on anaerobic reactor configurations, operational parameters such as pretreatment methods, temperature, trace elements, ammonia, organic loading rate, and feedstock composition and their association with the microbial community and microbial dynamics were extracted from eligible articles. Of 306 potential articles, 112 studies met the present review objectives and inclusion criteria. The results indicated that both aceticlastic and hydrogenotrophic methanogenesis are dominant in anaerobic digesters and their relative composition is depending on environmental conditions. However, hydrogenotrophic methanogens are more often observed in extreme conditions due to their higher robustness compared to aceticlastic methangoens. Firmicutes and Bacteroidetes phyla are most common fermentative bacteria of the acidogenic phase. These bacteria secrete lytic enzymes to degrade organic matters and are able to survive in extreme conditions and environments due to their spores. In addition, among archaea Methanosaeta, Methanobacterium, and Methanosarcinaceae are found at high relative abundance in anaerobic digesters operated with different operational parameters. Overall, understanding the shifts in microbial composition and diversity as results of operational parameters variation in anaerobic digestion process would improve the stability and process performance.

Diversity and Abundance of Microbial Communities in UASB Reactors during Methane Production from Hydrolyzed Wheat Straw and Lucerne

The use of straw for biofuel production is encouraged by the European Union. A previous study showed the feasibility of producing biomethane in upflow anaerobic sludge blanket (UASB) reactors using hydrolyzed, steam-pretreated wheat straw, before and after dark fermentation with Caldicellulosiruptor saccharolyticus, and lucerne. This study provides information on overall microbial community development in those UASB processes and changes related to acidification. The bacterial and archaeal community in granular samples was analyzed using high-throughput amplicon sequencing. Anaerobic digestion model no. 1 (ADM1) was used to predict the abundance of microbial functional groups. The sequencing results showed decreased richness and diversity in the microbial community, and decreased relative abundance of bacteria in relation to archaea, after process acidification. Canonical correspondence analysis showed significant negative correlations between the concentration of organic acids and three phyla, and positive correlations with seven phyla. Organic loading rate and total COD fed also showed significant correlations with microbial community structure, which changed over time. ADM1 predicted a decrease in acetate degraders after a decrease to pH ≤ 6.5. Acidification had a sustained effect on the microbial community and process performance.

Renewable Energy Products through Bioremediation of Wastewater

Due to rapid urbanization and industrialization, the population density of the world is intense in developing countries. This overgrowing population has resulted in the production of huge amounts of waste/refused water due to various anthropogenic activities. Household, municipal corporations (MC), urban local bodies (ULBs), and industries produce a huge amount of waste water, which is discharged into nearby water bodies and streams/rivers without proper treatment, resulting in water pollution. This mismanaged treatment of wastewater leads to various challenges like loss of energy to treat the wastewater and scarcity of fresh water, beside various water born infections. However, all these major issues can provide solutions to each other. Most of the wastewater generated by ULBs and industries is rich in various biopolymers like starch, lactose, glucose lignocellulose, protein, lipids, fats, and minerals, etc. These biopolymers can be converted into sustainable biofuels, i.e., ethanol, butanol, biodiesel, biogas, hydrogen, methane, biohythane, etc., through its bioremediation followed by dark fermentation (DF) and anaerobic digestion (AD). The key challenge is to plan strategies in such a way that they not only help in the treatment of wastewater, but also produce some valuable energy driven products from it. This review will deal with various strategies being used in the treatment of wastewater as well as for production of some valuable energy products from it to tackle the upcoming future demands and challenges of fresh water and energy crisis, along with sustainable development.

Preparation of a new Fenton-like catalyst from red mud using molasses wastewater as partial acidifying agent

Using molasses wastewater as partial acidifying agent, a new Fenton-like catalyst (ACRM _sm ) was prepared through a simple process of acidification and calcination using red mud as main material. With molasses wastewater, both the free alkali and the chemically bonded alkali in red mud were effectively removed under the action of H₂SO₄ and molasses wastewater, and the prepared ACRM _sm was a near-neutral catalyst. The ACRM _sm preparation conditions were as follows: for 3 g of red mud, 9 mL of 0.7 mol/L H₂SO₄ plus 2 g of molasses wastewater as the acidifying agent, calcination temperature 573 K, and calcination time 1 h. Iron phase of ACRM _sm was mainly α-Fe₂O₃ and trace amount of carbon existed in ACRM _sm . The addition of molasses wastewater not only effectively reduced the consumption of H₂SO₄ in acidification of red mud but also resulted in the generation of carbon and significantly improved the distribution of macropore in prepared ACRM _sm . It was found that near-neutral pH of catalyst, generated carbon, and wide distribution of macropore were the main reasons for the high catalytic activity of ACRM _sm . The generated carbon and wide distribution of macropore were entirely due to the molasses wastewater added. In degradation of orange II, ACRM _sm retained most of its catalytic stability and activity after five recycling times, indicating ACRM _sm had an excellent long-term stability in the Fenton-like process. Furthermore, the performance test of settling showed ACRM _sm had an excellent settleability. ACRM_sm was a safe and green catalytic material used in Fenton-like oxidation for wastewater treatment.

Molasses wastewater treatment and lipid production at low temperature conditions by a microalgal mutant Scenedesmus sp. Z-4

BACKGROUND

Simultaneous wastewater treatment and lipid production by oleaginous microalgae show great potential to alleviate energy shortage and environmental pollution, because they exhibit tremendous advantages over traditional activated sludge. Currently, most research on wastewater treatment by microalgal are carried out at optimized temperature conditions (25-35 °C), but no information about simultaneous wastewater treatment and lipid production by microalgae at low temperatures has been reported. Microalgal growth and metabolism will be inhibited at low temperature conditions, and satisfactory wastewater treatment performance will be not obtained. Therefore, it is critical to domesticate and screen superior microalgal strains with low temperature adaptability, which is of great importance for wastewater treatment and biodiesel production.

RESULTS

In this work, simultaneous wastewater treatment and lipid production were achieved by a microalgal mutant Scenedesmus sp. Z-4 at the low temperature conditions (4, 10, and 15 °C). The results showed that algal growth was inhibited at 4, 10, and 15 °C compared to that at the optimal temperature of 25 °C. However, decreased temperature had no significant effect on the total cellular lipid content of algae. Importantly, lipid productivity at 10 °C was compromised by more net energy output relevant to biodiesel production, which demonstrated that the low temperature of 10 °C was favorable to wastewater treatment and energy recovery by Scenedesmus sp. Z-4. When molasses wastewater with optimal COD concentration of 8000 mg L^-1, initial inoculation ratio of 15%, and C/N ratio of 15 was used to cultivate microalgae, the maximum removal rate of COD, TN, and TP at 10 °C reached 87.2, 90.5, and 88.6%, respectively. In addition, lipid content of 28.9% and lipid productivity of 94.4 mg L^-1 day^-1 were obtained.

CONCLUSIONS

Scenedesmus sp. Z-4 had good adaptability to low temperature conditions, and showed great potential to realize simultaneous wastewater treatment and lipid production at low temperatures. The proposed approach in the study was simple compared to other wastewater treatment methods, and this potential novel process was still efficient to remove COD, N, and P at low temperatures. Thus, it had a vital significance for the wastewater treatment in low temperature regions.