Carbon and hydrogen isotope fractionation during aerobic biodegradation of quinoline and 3-methylquinoline

Phage Cocktail Alleviates Bacterial Canker of Kiwifruit by Modulating Bacterial Community Structure in Field Trial

Bacterial canker of kiwifruit is the most destructive bacterial disease caused by Pseudomonas syringae pv. actinidiae. Bacteriophages are regarded as promising biocontrol agents against kiwifruit bacterial pathogens due to their exceptional host specificity and environmentally friendly nature. However, the underlying mechanism of phages in the control of kiwifruit bacterial canker disease remains elusive. In this study, the field trial results showed that phage cocktail could significantly reduce the incidence of bacterial canker in kiwifruit. The high throughput sequencing results showed that the phage cocktail regulated the impact of pathogen invasion on branch endophytic communities, adjusted the diversity of the bacterial community structure, regulated the composition of rare taxa and abundant taxa, and increased the proportion of deterministic processes in community assembly processes. The phage cocktail significantly reduced the relative abundance of Pseudomonadaceae, Pectobacteriaceae, and Yersiniacea. Furthermore, the application of the phage cocktail resulted in an increase in the relative abundance of Beijerinckiaceae, Sphingomonadaceae, and Xanthomonadaceae, most of which are abundant taxa of the corresponding microbial communities. Additionally, the composition of rare taxa was also altered under the influence of phages. These findings offer perspectives on the phage-mediated biocontrol of kiwifruit bacterial canker and provide practical backing for the implementation of phage cocktails in sustainable agriculture.

Identification of dense nonaqueous phase liquid sources in groundwater: a review of isotope technique

Excessive dense nonaqueous phase liquids (DNAPLs) in subsurface aquifers posed a threat to human health and sustainable development of groundwater resources. Accurately identifying the sources of DNAPLs is crucial for groundwater remediation and prevention efforts. In the previous studies, significant advances were made in using isotope techniques for identifying DNAPLs in groundwater. In this paper, we provide a comprehensive overview of the commonly used isotopic tools applied to source identification. This overview will outline the advantages and limitations of the isotope technique and describe the needs for future research. Isotope tracing techniques are based on the unique isotopic characteristics of DNAPLs from different sources, enabling the identification and differentiation of DNAPL sources. The δ13C and δ37Cl values are most commonly used for identifying DNAPLs in groundwater. In field applications, however, the differences in isotopic characteristics from diverse sources can be weakened after undergoing a series of human and natural factors, which can affect the accuracy of source identification. To improve the accuracy of DNAPL source identification, a dual-isotope tracing approach seems the best available solution. Nonetheless, in the face of complex polluted environments, the dual-isotope method seems stretched. Therefore, further researches remain to be carried out to accurately and efficiently assess the sources of DNAPLs in groundwater and their individual contributions. This is a prerequisite for groundwater resource conservation and remediation efforts.

Microbiota characterization of the green mussel Perna viridis at the tissue scale and its relationship with the environment

Research on the microbiota associated with marine invertebrates is important for understanding host physiology and the relationship between the host and the environment. In this study, the microbiota of the green mussel Perna viridis was characterized at the tissue scale using 16S rRNA gene high-throughput sequencing and compared with the microbiota of the surrounding environment. Different mussel tissues were sampled, along with two environmental samples (the mussel's attachment substratum and seawater). The results showed that the phyla Proteobacteria, Bacteroidetes, and Spirochaetae were dominant in mussel tissues. The bacterial community composition at the family level varied among the tissues of P. viridis. Although the microbiota of P. viridis clearly differed from that of the surrounding seawater, the composition and diversity of the microbial community of the foot and outer shell surface were similar to those of the substratum, indicating their close relationship with the substratum. KEGG prediction analysis indicated that the bacteria harbored by P. viridis were enriched in the degradation of aromatic compounds, osmoregulation, and carbohydrate oxidation and fermentation, processes that may be important in P. viridis physiology. Our study provides new insights into the tissue-scale characteristics of mussel microbiomes and the intricate connection between mussels and their environment.

New insights into the typical nitrogen-containing heterocyclic compound-quinoline degradation and detoxification by microbial consortium: Integrated pathways, meta-transcriptomic analysis and toxicological evaluation

As the primary source of COD in industrial wastewater, quinoline has aroused increasing attention because of its potential teratogenic, carcinogenic, and mutagenic effects in the environment. The activated sludge isolate quinoline-degrading microbial consortium (QDMC) efficiently metabolizes quinoline. However, the molecular underpinnings of the degradation mechanism of quinoline by QDMC have not been elucidated. High-throughput sequencing revealed that the dominant genera included Diaphorobacter, Bacteroidia, Moheibacter and Comamonas. Furthermore, a positive strong correlation was observed between the key bacterial communities (Diaphorobact and Bacteroidia) and quinoline degradation. According to metatranscriptomics, genes associated with quorum sensing, ABC transporters, component systems, carbohydrate, aromatic compound degradation, energy metabolism and amino metabolism showed high expression, thus improving adaptability of microbial community to quinoline stress. In addition, the mechanism of QDMC in adapting and resisting to extreme environmental conditions in line with the corresponding internal functional properties and promoting biogegradation efficiency was illustrated. Based on the identified products, QDMC effectively mineralized quinoline into low-toxicity metabolites through three major metabolic pathways, including hydroxyquinoline, 1,2,3,4-H-quinoline, 5,6,7,8-tetrahydroquinoline and 1-oxoquinoline pathways. Finally, toxicological, genotoxicity and phytotoxicity studies supported the detoxification of quinoline by the QDMC. This study provided a promising approach for the stable, environmental-friendly and efficient bioremediation applications for quinoline-containing wastewater.

Effects of Climate Change on Soil Organic Matter C and H Isotope Composition in a Mediterranean Savannah (Dehesa): An Assessment Using Py-CSIA

Dehesas are Mediterranean agro-sylvo-pastoral systems sensitive to climate change. Extreme climate conditions forecasted for Mediterranean areas may change soil C turnover, which is of relevance for soil biogeochemistry modeling. The effect of climate change on soil organic matter (SOM) is investigated in a field experiment mimicking environmental conditions of global change scenarios (soil temperature increase, +2-3 °C, W; rainfall exclusion, 30%, D; a combination of both, W+D). Pyrolysis-compound-specific isotope analysis (Py-CSIA) is used for C and H isotope characterization of SOM compounds and to forecast trends exerted by the induced climate shift. After 2.5 years, significant δ13C and δ2H isotopic enrichments were detected. Observed short- and mid-chain n-alkane δ13C shifts point to an increased microbial SOM reworking in the W treatment; a 2H enrichment of up to 40‰ of lignin methoxyphenols was found when combining W+D treatments under the tree canopy, probably related to H fractionation due to increased soil water evapotranspiration. Our findings indicate that the effect of the tree canopy drives SOM dynamics in dehesas and that, in the short term, foreseen climate change scenarios will exert changes in the SOM dynamics comprising the biogeochemical C and H cycles.

A 2D CSIA-based math method to quantify degradation rate by C-H bond breaking

Compound-specific isotope analysis has been demonstrated to be a powerful tool for the assessment of in situ pollutant degradation. Enrichment factor, an essential and prerequisite parameter, could be determined under simulated control laboratory in advance. However, different microbial community composition and substrate availability may significantly affect the accuracy of simulated enrichment factor. Here, a modified mathematic method of two dimensional is proposed to quantify the extent of pollutant degradation involving the break of carbon and hydrogen bond. In this new model, the laboratory cultures used to determine carbon or hydrogen enrichment factors in advance could be canceled and the key point to assess the extent of biodegradation is only determining the value of Λ_ri (dual C-H isotope slope calculated with a self-modified model) in the field investigation. As a new and convenient method, this math model greatly facilitates the investigation of pollutant degradation extent under field conditions. Two approaches are applied to evaluate the proposed model. With our model, the estimated results based on C isotope are consistent with those measured values, while those based on H isotope are unsatisfactory. This can be attributed to the differences in accuracy of C-H isotope determinations. Overall, enrichment factors and biodegradation rates calculated with the proposed model are comparable with those measured figures.

Variations in lignin monomer contents and stable hydrogen isotope ratios in methoxy groups during the biodegradation of garden biomass

Lignin, a highly polymerized organic component of plant cells, is one of the most difficult aromatic substances to degrade. Selective biodegradation under mild conditions is a promising method, but the dynamic variations in lignin monomers during the biodegradation of lignocellulose are not fully understood. In this study, we evaluated the differences in lignin degradation under different microbial inoculation based on the lignin monomer content, monomer ratio, and stable hydrogen isotope ratio of lignin methoxy groups (δ2HLM). The weight loss during degradation and the net loss of lignocellulosic components improved dramatically with fungal inoculation. Syringyl monolignol (S-lignin), which contains two methoxy groups, was more difficult to degrade than guaiacyl (G-lignin), which contains only one methoxy group. The co-culture of Pseudomonas mandelii and Aspergillus fumigatus produced the greatest decrease in the G/S ratio, but δ2HLM values did not differ significantly among the three biodegradation experiments, although the enrichment was done within the fungal inoculation. The fluctuation of δ2HLM values during the initial phase of biodegradation may be related to the loss of pectic polysaccharides (another methoxy donor), which mainly originate from fallen leaves. Overall, the relative δ2HLM signals were preserved despite decreasing G/S ratios in the three degradation systems. Nevertheless, some details of lignin δ2HLM as a biomarker for biogeochemical cycles need to be explored further.

A modified method to calculate dual-isotope slopes for the natural attenuation of organic pollutants in the environment

Two-dimensional compound-specific isotope analysis has become a powerful tool for distinguishing reaction mechanisms. Lambda (Λ), an essential and important parameter for processing two-dimensional isotope fractionation data, exhibits values specific to a reaction mechanism. In the present article, we modified the existing algorithms for calculation of lambdas based on a review of current methods. Specifically, by regressing [(1000+δE_0,2)*(n₁*x₂)*ΔδE_bulk,1] versus [(1000+δE_0,1)*(n₂*x₁)*ΔδE_bulk,2] by the York method, a novel method was developed to calculate Λs. The improved method eliminates both the influence of the nonreacting position and the initial isotope signatures. Furthermore, this method retains the advantages of a two-dimensional isotope plot, which eliminates contributions from commitment to catalysis, does not require determination of the fraction of remaining substrate, and can be constructed even from field data. Additionally, the one-sample t test is applied to generate a 95% confidence interval of the dataset of Λ_ris for various reaction mechanisms. The ranges of 5.67-24.8, 8.54-9.80, 0.51-8.35, 25.2-36.8, and 7.09-21.9 are applicable for the oxidation of C-H bonds (Z_C=1, Z_H=3; Z_C and Z_H are the number of indistinguishable carbon and hydrogen atoms in intramolecular competition, respectively), oxidation of C-H bonds (Z_C=1, Z_H=4), aerobic biodegradation of benzene (Z_C=6, Z_H=6), methanogenic or sulfate-reducing biodegradation of benzene (Z_C=6, Z_H=6), and nitrate-reducing biodegradation of benzene (Z_C=6, Z_H=6). The accumulation and correction of these values will make the data measured in the field easier to interpret.

A state-of-the-art review of quinoline degradation and technical bottlenecks

Quinoline is a critical raw material for the dye, metallurgy, pharmaceutical, rubber, and agrochemical industries, and its use poses a serious threat to human health and the ecological environment. Quinoline has carcinogenic, teratogenic and mutagenic effects on the human body through food accumulation. However, due to the steric hindrance of its bicyclic fused structure and its long photooxidation half-life, quinoline is too difficult to decompose naturally. To date, numerous technologies have been used to degrade quinoline, whereas only a few have been reviewed. Therefore, this paper is focused on offering a comprehensive overview of the state of quinoline degradation in an effort to improve its degradation efficiency and fully utilize the carbon and nitrogen within quinoline without causing any damage to the environment. Accordingly, the strains, research progress and mechanisms of various methods for degrading quinoline are explored and elucidated in detail, especially quinoline biodegradation and the combination of these technologies for efficient removal. The state-of-the-art processes and new findings of our team on the biofortification of quinoline degradation are also presented. Finally, research bottlenecks and gaps for future research were identified along with the prospects and resource utilization of quinoline. These discussions facilitate the realization of the zero discharge of quinoline.

Degradation of oxytetracycline under autotrophic nitrifying conditions in a membrane aerated biofilm reactor and community fingerprinting

Pharmaceuticals in waterbodies are a growing concern due to their extensive uses and adverse effects on aquatic life. Oxytetracycline (OTC) is one of tetracycline antibiotic group used for treatment of animals and humans. This study evaluates the simultaneous oxidation of OTC and ammonium under autotrophic nitrifying conditions by using a membrane aerated biofilm reactor (MABR) as it provides an appropriate environment for the antibiotic-degrading bacteria. The results showed that MABR achieved fluxes of 1.62 mg OTC/m².d and 1117 mg N/m².d while the fluxes of O₂ (J_OTC-O2) utilized for OTC and NH₄-N (J_NH4-N-_O2) oxidation were calculated to be 2.94 and 5105 mg O₂/m².d, respectively. Three transformation products, 4-Epi-OTC, α-Apo-OTC and β-Apo-OTC, were identified and measured at ppb levels. The biofilm community comprised of Bacteria environmental samples, b-proteobacteria, CFB group bacteria, g-proteobacteria, d-proteobacteria and a-proteobacteria.