Characterization of porins isolated from the outer membrane of Serratia liquefaciens

Atomic force microscopy of isolated mitochondria

This chapter describes methods for isolating and imaging metabolically and toxicologically challenged mitochondria with atomic force microscopy. Mitochondria were isolated from rat dorsal root ganglia or brain and exposed to glucose or dinitrobenzene (DNB) to simulate the cellular environment of a diabetic animal that has been exposed to excess glucose or to DNB. It is one of only a few articles to present images of membrane structures, such as voltage-dependent, anion-selective channel pores, on intact organelles. The purpose of the chapter is not to report on the metabolic or toxic effects, but to communicate in more detail than a typical journal paper allows the methods used to image isolated organelles. We also provide a series images revealing the outer membrane and outer membrane pores. An image of an isolated nucleus as well as a set of notes written to avoid common pitfalls in isolation, labeling, and imaging is also included.

Isolation and characterization of porins from Desulfovibrio piger and Bilophila wadsworthia: structure and gene sequencing

The outer membrane proteins of Desulfovibrio piger and Bilophila wadsworthia (Omp-DP and Omp-BW, respectively) and the genes encoding them (omp-DP and omp-BW) were isolated and characterized. Native Omp-DP and Omp-BW form a trimeric structure of approximately 120 kDa. These proteins disaggregated into monomers with a molecular weight of approximately 53 kDa after heating at 95 degrees C for 10 min. The pore-forming abilities of these oligomeric proteins demonstrated that they form small nonspecific channels with an exclusion limit of 260-300 Da. The omp-DP and omp-BW genes were cloned and sequenced. Sequence analyses revealed an open reading frame of 1,512 bp for omp-DP and 1,440 bp for omp-BW. The mature Omp-DP protein consisted of 480 amino acids and had a calculated MW of 53,290 Da. The mature Omp-BW protein consisted of 456 amino acids and had a calculated MW of 50.050 Da. Alignment of Omp-DP with Omp-BW revealed 54% homology, whereas alignment with other known porins showed a low level of homology. Analysis of the secondary structures indicated that both proteins span the outer membrane 18 times with amphipathic beta-strands. This research presents porins which were isolated and characterized for the first time from bacteria belonging to the Desulfovibrionaceae family.

The YompC protein of Yersinia enterocolitica: molecular and physiological characterization

The structural gene coding for YompC has been identified in the genome of a pathogenic strain of Yersinia enterocolitica O:9, and was subsequently cloned and sequenced. Detailed alignment of the deduced amino acid sequence showed that YompC is a member of the OmpC porin family with the highest degree of homology to Klebsiella pneumoniae. The mutant lacking YompC porin was constructed by insertional inactivation of the yompC gene which resulted from the integration of suicide vector at the yompC locus. In intact cells of Y. enterocolitica, loss of the YompC protein reduced the outer membrane permeability for beta-lactam antibiotics and tetracycline and resulted in a 2-5-fold increase in resistance to these compounds, depending on their chemical properties. Mutation in the ompR regulatory gene resulted in the loss of both YompC and YompF porins, which led to a greater increase of resistance to antibiotics, as compared with the YompC mutant strain. Moreover, the binding assay with HEp-2 cells suggests that YompC may play a role in the adhesion properties of Y. enterocolitica strains.

Porin Isolated from the Outer Membrane of Erwinia amylovora and Its Encoding Gene

A major Erwinia amylovora outer-membrane protein (Omp-EA) and the gene encoding for this protein (omp-EA) were isolated and characterized. The native Omp-EA protein forms a trimeric structure of approximately 114 kDa. This protein demonstrated high resistance to detergents such as SDS and octyl-glucopyranoside, but disaggregated to monomers with a molecular weight (MW) of approximately 39 kDa after heating at 95 degrees C for 10 minutes in sample buffer. The pore-forming ability of the oligomeric Omp-EA was determined by the liposome swelling assay, demonstrating that the oligomeric protein formed nonspecific channels with an exclusion limit of approximately 660 Da. On dissociation, the monomers did not exhibit pore-forming ability. The omp-EA gene was cloned and sequenced (GenBank Accession No. DQ184680). Sequence analysis revealed an open reading frame of 1152 bases. The deduced amino-acid sequence had 383 amino acids. The mature protein consisted of 362 amino acids and had a calculated MW of 39,210 Da. Multiple-sequence alignment of Omp-EA with other porins from the Enterobacteriaceae family revealed 51% to 63% identity. The first 16 amino acids from the N-terminal exhibited the highest identity (100%) to the porins OmpC, OmpF, and PhoE of Escherichia coli. Two methods were used to predict the secondary structure: APSSP2 and Hidden and Markov's model. The monomers of Omp-EA porin presented a topology of 16 transmembranal beta-strands. The area of the loops between the beta -strands was proposed. It is suggested that further research on the porin and its loops may be important for understanding the mechanism of E. amylovor to invade plant tissues.

Expression and refolding of Omp38 from Burkholderia pseudomallei and Burkholderia thailandensis, and its function as a diffusion porin

In the present paper, we describe cloning and expression of two outer membrane proteins, BpsOmp38 (from Burkholderia pseudomallei) and BthOmp38 (from Burkholderia thailandensis) lacking signal peptide sequences, using the pET23d(+) expression vector and Escherichia coli host strain Origami(DE3). The 38 kDa proteins, expressed as insoluble inclusion bodies, were purified, solubilized in 8 M urea, and then subjected to refolding experiments. As seen on SDS/PAGE, the 38 kDa band completely migrated to approximately 110 kDa when the purified monomeric proteins were refolded in a buffer system containing 10% (w/v) Zwittergent 3-14, together with a subsequent heating to 95 degrees C for 5 min. CD spectroscopy revealed that the 110 kDa proteins contained a predominant beta-sheet structure, which corresponded completely to the structure of the Omp38 proteins isolated from B. pseudomallei and B. thailandensis. Immunoblot analysis using anti-BpsOmp38 polyclonal antibodies and peptide mass analysis by MALDI-TOF (matrix-assisted laser-desorption ionization-time-of-flight) MS confirmed that the expressed proteins were BpsOmp38 and BthOmp38. The anti-BpsOmp38 antibodies considerably exhibited the inhibitory effects on the permeation of small sugars through the Omp38-reconstituted liposomes. A linear relation between relative permeability rates and M(r) of neutral sugars and charged antibiotics suggested strongly that the in vitro re-assembled Omp38 functioned fully as a diffusion porin.

In situ imaging of mitochondrial outer-membrane pores using atomic force microscopy

Here we describe a technique for imaging of the outer contours of the mitochondrial membrane using atomic force microscopy, subsequent to or during a toxic or metabolic challenge. Pore formation in both glucose-challenged and 1,3-dinitrobenzene (DNB)-challenged mitochondria was observed using this technique. Our approach enables quantification of individual mitochondrial membrane pore formations. With this work, we have produced some of the highest resolution images of the outer contours of the in situ mitochondrial membrane published to date. These are potentially the first images of the component protein clusters at the time of formation of the mitochondrial membrane transition pore in situ. With the current work, we have extended the application of atomic force microscopy of mitochondrial membranes to fluid imaging. We have also begun to correlate 3-D surface features of mitochondria dotted with open membrane pores with features previously viewed with electron microscopy (EM) of fixed sections.

Functional reconstitution, gene isolation and topology modelling of porins from Burkholderia pseudomallei and Burkholderia thailandensis

The sequences for Omp38 from Burkholderia pseudomallei and Burkholderia thailandensis have been deposited in the DDBJ, EMBL, GenBank(R) and GSDB Nucleotide Sequence Databases under the accession numbers AY312416 and AY312417 respectively. The intracellular pathogen Burkholderia pseudomallei is the causative agent of tropical melioidosis, and Burkholderia thailandensis is a closely-related Gram-negative bacterium that does not cause serious disease. Like other bacteria, the major outer membrane (OM) porins of Burkholderia strains, Bps Omp38 and Bth Omp38 may have roles in antibiotic resistance and immunity. We purified both proteins and found them to be immunologically related, SDS-resistant, heat-sensitive trimers with M (r) of approx. 110000. In functional liposome-swelling assays, both proteins showed similar permeabilities for small sugar molecules, compatible with a pore diameter of between 1.2 and 1.6 nm. Secondary structure analysis by FTIR (Fourier-transform infrared) spectroscopy revealed almost identical spectra with predominantly beta-sheet structures, typical of bacterial porins. MALDI-TOF (matrix-assisted laser-desorption ionization-time of flight) MS and ESI/MS (electrospray ionization MS) analysis of each protein showed extensive sequence similarities to the OpcP1 porin from Burkholderia cepacia (later found to be 76.5% identical). Based on information from the incomplete B. pseudomallei genome-sequencing project, the genes encoding Omp38 were identified and amplified by PCR from B. pseudomallei and B. thailandensis genomic DNA. The nucleotide sequences are 99.7% identical, and the predicted processed proteins are 100% identical. Topology prediction and molecular modelling suggest that this newly-isolated and cloned porin is a 16-stranded beta-barrel and the external loops of the protein could be important determinants of the immune response to infection.