Inter-polymer complex microspheres of chitosan and cellulose acetate phthalate for oral delivery of 5-fluorouracil

Utilizing 4D Printing to Design Smart Gastroretentive, Esophageal, and Intravesical Drug Delivery Systems

The breakthrough of 3D printing in biomedical research has paved the way for the next evolutionary step referred to as four dimensional (4D) printing. This new concept utilizes the time as the fourth dimension in addition to the x, y, and z axes with the idea to change the configuration of a printed construct with time usually in response to an external stimulus. This can be attained through the incorporation of smart materials or through a preset smart design. The 4D printed constructs may be designed to exhibit expandability, flexibility, self-folding, self-repair or deformability. This review focuses on 4D printed devices for gastroretentive, esophageal, and intravesical delivery. The currently unmet needs and challenges for these application sites are tried to be defined and reported on published solution concepts involving 4D printing. In addition, other promising application sites that may similarly benefit from 4D printing approaches such as tracheal and intrauterine drug delivery are proposed.

5-Fluorouracil drug delivery system based on bacterial nanocellulose for colorectal cancer treatment: Mathematical and in vitro evaluation

Colorectal cancer (CRC) is the third most common worldwide. Its treatment includes adjuvant chemotherapy with 5-fluorouracil (5FU) administered intravenously. 5FU is an antineoplastic drug of the fluoropyrimidines group, widely used in the treatment of solid tumors, mainly CRC. Nevertheless, it causes several adverse effects and poor effectiveness due to its short half-life. This work aimed to employ bacterial nanocellulose (BNC) as an encapsulation material for the oral administration of 5FU. First, the adsorption phenomena were analyzed by isotherms, thermodynamic parameters, and kinetic models. Then, encapsulation was carried out using spray-drying, and encapsulated 5FU desorption profiles were assessed in simulated fluids. The biological behavior was evaluated on colon cancer SW480 and SW620 cell lines. As result, it was found that at 25 °C a monolayer of 5FU was formed and the process showed to be the most spontaneous one. In the characterization of the nanocapsules, important changes were detected by the presence of 5FU. The delivery in the colon corresponded to a controlled release behavior. The in vitro assay indicated an improvement in the toxicity effect of the drug and its mechanism of action. Accordingly, BNC is a promising biomaterial for the development of a colon drug delivery platform of 5FU.

Surfactant-Free Chitosan/Cellulose Acetate Phthalate Nanoparticles: An Attempt to Solve the Needs of Captopril Administration in Paediatrics

The Paediatric Committee of the European Medicines Agency encourages research into medicinal products for children, in particular, the development of an age-appropriate formulation of captopril is required in the cardiovascular therapeutic area. The aim of this study was the development of a liquid formulation using nanoparticles based only on chitosan and cellulose acetate phthalate containing captopril for the treatment of hypertension, heart failure and diabetic nephropathy in paediatric patients. Nanoparticles were prepared by a nanoprecipitation method/dropping technique without using surfactants, whose use can be associated with toxicity. A range of different cellulose to chitosan weight ratios were tested. A good encapsulation efficiency (61.0 ± 6.5%) was obtained when a high chitosan concentration was used (1:3 ratio); these nanoparticles (named NP-C) were spherical with a mean diameter of 427.1 ± 32.7 nm, 0.17 ± 0.09 PDI and +53.30 ± 0.95 mV zeta potential. NP-C dispersion remained stable for 28 days in terms of size and drug content and no captopril degradation was observed. NP-C dispersion released 70% of captopril after 2 h in pH 7.4 phosphate buffer and NP-C dispersion did not have a cytotoxicity effect on neonatal human fibroblasts except at the highest dose tested after 48 h. As a result, chitosan/cellulose nanoparticles could be considered a suitable platform for captopril delivery in paediatrics for preparing solid/liquid dosage forms.

Polysaccharide-Based Aerogel Production for Biomedical Applications: A Comparative Review

A comparative analysis concerning bio-based gels production, to be used for tissue regeneration, has been performed in this review. These gels are generally applied as scaffolds in the biomedical field, thanks to their morphology, low cytotoxicity, and high biocompatibility. Focusing on the time interval 2015-2020, the production of 3D scaffolds of alginate, chitosan and agarose, for skin and bone regeneration, has mainly been investigated. Traditional techniques are critically reviewed to understand their limitations and how supercritical CO2-assisted processes could overcome these drawbacks. In particular, even if freeze-drying represents the most widespread drying technique used to produce polysaccharide-based cryogels, supercritical CO2-assisted drying effectively allows preservation of the nanoporous aerogel structure and removes the organic solvent used for gel preparation. These characteristics are essential for cell adhesion and proliferation.

Three-dimensional printed 5-fluorouracil eluting polyurethane stents for the treatment of oesophageal cancers

3D printing is introduced as rapid and facile approach to prepare personalized drug-eluting stents for the treatment of oesophageal cancers.

Development of Novel EE/Alginate Polyelectrolyte Complex Nanoparticles for Lysozyme Delivery: Physicochemical Properties and In Vitro Safety

The number of biologic drugs has increased in the pharmaceutical industry due to their high therapeutic efficacy and selectivity. As such, safe and biocompatible delivery systems to improve their stability and efficacy are needed. Here, we developed novel cationic polymethacrylate-alginate (EE-alginate) pNPs for the biologic drug model lysozyme (Lys). The impact of variables such as total charge and charge ratios over nanoparticle physicochemical properties as well as their influence over in vitro safety (viability/proliferation and cell morphology) on HeLa cells was investigated. Our results showed that electrostatic interactions between the EE-alginate and lysozyme led to the formation of EE/alginate Lys pNPs with reproducible size, high stability due to their controllable zeta potential, a high association efficiency, and an in vitro sustained Lys release. Selected formulations remained stable for up to one month and Fourier transform-Infrared (FT-IR) showed that the functional groups of different polymers remain identifiable in combined systems, suggesting that Lys secondary structure is retained after pNP synthesis. EE-alginate Lys pNPs at low concentrations are biocompatible, while at high concentrations, they show cytotoxic for HeLa cells, and this effect was found to be dose-dependent. This study highlights the potential of the EE-alginate, a novel polyelectrolyte complex nanoparticle, as an effective and viable nanocarrier for future drug delivery applications.

Novel hyaluronic acid coated hydrophobically modified chitosan polyelectrolyte complex for the delivery of doxorubicin

The aim of this work was to examine the formation and properties of a novel polyelectrolyte complex of drug carrier system for the delivery of doxorubicin (DOX), which consists of hyaluronic acid (HA) coated hydrophobically modified chitosan (CS). Various batches of polyelectrolyte complexes with the molar ratio of deoxycholic acid (DCA) and chitosan (CS) of 0.1, 0.2, 0.3 were prepared, and were termed as CS-DCA₁₀, CS-DCA₂₀, and CS-DCA₃₀ respectively. The samples were characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Transmission electron microscopy (TEM), nuclear magnetic resonance hydrogen spectrum (¹H NMR) and dynamic light scattering (DLS). Particle sizes of synthesized polyelectrolyte complex nanoparticles (PCNs) were found to be in the range of 280-310 nm, larger than those of uncoated nanoparticles (~150 nm). The PCNs have large zeta potentials (about 26 mV) which make them stable and no sizes' change was determined. DOX could be easily incorporated into the PCNs with encapsulation efficiency (56%) and kept a sustained release manner without burst effect when exposed to PBS (pH 7.4) at 37 °C. Overall, these findings confirmed the potential of these PCNs for drug carrier and prolonged and sustained delivery in the bloodstream.

Unified D-α-Tocopherol 5-Fu/SAHA bioconjugates self-assemble as complex nanodrug for optimized combination therapy

Aim: To optimize the synergistic efficacy of combination therapy with controlled molar ratio, complex small molecule-based nanodrug (Co-SMND) of 5-fluorouracil (5-Fu)/vorinostat (SAHA) was developed. Materials & methods: Co-SMND with various ratios of 5-Fu-D-α-tocopherol (VE)/SAHA-VE were prepared and characterized including co-assembly mechanism, hydrolytic stability, cytotoxicity, synergistic effect and apoptosis inducing ability. The antitumor activity, systematic toxicity and biodistribution of optimized Co-SMND were evaluated in CT-26 bearing BALB/c mouse. Results: Maximal synergistic effect of Co-SMND could be obtained via simply adjusting the feeding molar ratio. The optimized Co-SMND showed superior in vivo antitumor efficacy, upregulated security and selective intratumoral accumulation. Conclusion: Such Co-SMND is of great significance for future clinical translation, and would be an efficient platform for combination chemotherapy.

Synthesis and Characterization of Chitosan Nanoaggregates from Gladius of Uroteuthis duvauceli

We report the synthesis, characterization, and biological properties of chitosan nanoaggregates from gladius of squid, Uroteuthis duvauceli. β-Chitin extracted from gladius was deacetylated to chitosan and further reduced to nanosize using ionic gelation process. The morphology and occurrence of chitosan nanoaggregates (CSNA) were observed using transmission electron microscopy (TEM). The degree of deacetylation (DD%) calculated from Fourier transform infrared (FTIR) spectrum showed high value (~94 ± 1.25%) for chitosan. The CSNA depicts low molecular weight, stable positive zeta potential, and less ash and moisture content with high water and fat binding capacity. The antimicrobial activity was tested against pathogenic microorganisms, which depicted significant rate of inhibition against Staphylococcus aureus and Escherichia coli due to high cellular uptake. The antioxidant analysis for CSNA demonstrated high reducing power and scavenging activity towards superoxide radicals compared with the commercially available chitosan. Furthermore, nanoaggregates exhibited low cytotoxic behavior in biological in vitro tests performed using cervical cancer cell line. These results indicate that chitosan nanoaggregates synthesized from waste gladius will be highly efficient and safe candidate for biological applications as food packing film, drug carrier, and tissue engineering.