Preparation and regeneration of a thermo-sensitive adsorbent material: methyl cellulose/calcium alginate beads (MC/CABs)

Preparation and characterization of biochar from four different solid wastes and its ampicillin adsorption performance

The integration of biochar (BC) production from organic waste with ampicillin (AMP), an emerging pollutant, adsorption is a novel and promising treatment approach. In this study, peanut shells, coffee grounds, digestates, and oyster shells were used for BC production. Among these, the use of anaerobic digestate from food waste fermentation to produce extracts for antibiotic adsorption is relatively unexplored. The pyrolysis temperature was determined using thermogravimetric analysis (TGA) and the materials were characterized with BET, SEM, FTIR, and XRD. The TGA results indicate that PSB, CRB, and DSB underwent pyrolysis involving cellulose, hemicellulose, and lignin, whereas OSB underwent crystal formation. Characterization revealed that DSB has more functional groups, a superior mesoporous structure, appropriate O/C ratio, and trace amounts of calcite crystals, which are favorable for AMP adsorption. Adsorption experiments demonstrate that all four materials adhere to the Freundlich and Langmuir isotherm and Elovich kinetic models, indicating predominant physical adsorption, with some chemical adsorption also present. Thermodynamic studies demonstrate that BC is spontaneous during adsorption and is a heat-absorbing reaction. DSB exhibits the strongest AMP adsorption. A 53.81 mg g-1 adsorbance was obtained at a dosage of 150 mg, pH = 2, and 60 °C. This study introduces innovative approaches for managing waste types and provides data to support the selection of suitable solid wastes for the preparation of BC with excellent adsorption properties. Furthermore, it lays the groundwork for future studies aimed at enhancing the AMP treatment efficacy.

Preparation and Characterization of Temperature/pH Dual-Responsive Gel Spheres for Immobilizing Nitro Bacteria

The temperature/pH dual-responsive gel spheres were prepared by orthogonal experiments and response surface methodology, and finally, the optimal synthesis conditions were obtained by a composite score, including swelling, mechanical properties, mass transfer properties, and so forth. The results showed that a sodium alginate concentration of 3% (w/v), CaCl₂ concentration of 2% (w/v), gelling time of 40 h, drop height of 14 cm, NaCl concentration of 0.6% (w/v), N-isopropylacrylamide concentration of 0.03% (w/v), and acrylic acid concentration of 4.06% (w/v) were optimal synthesis conditions. The environmental change tolerance experiments showed that the nitrogen removal of the dual-response nitrifying gel spheres was better than the domesticated sludge at low temperatures (4 °C) and in alkaline (pH 9 and 10) conditions. The as-obtained gel spheres can respond intelligently to the changes in ambient temperature and pH. It is hoped that this study will provide technical parameters for the development and application of microbial immobilization carriers.

Enhanced activation of persulfate by CuCoFe2O4@MC/AC as a novel nanomagnetic heterogeneous catalyst with ultrasonic for metronidazole degradation

In this study, the degradation of Metronidazole (MNZ) using CuCoFe₂O₄@MC/AC catalyst synthesized by microwave-assisted method, as an efficient activator for persulfate (PS) in the presence of ultrasonic (US: 60 kHz) was investigated. X-ray powder diffraction (XRD), Field emission scanning electron microscope (FESEM), Energy dispersive spectroscopy (EDS)-Mapping and Line scan, Fourier transform infrared spectroscopy (FTIR), Vibrating-sample magnetometer (VSM), and Thermal gravimetric analysis (TGA) were conducted to characterize the structure of CuCoFe₂O₄@MC/AC catalyst and then the catalyst dose, PS dose, MNZ concentration, and pH parameters were optimized. The maximum MNZ degradation of 93.78 % was achieved after 15 min reaction at the optimized operation conditions: 0.4 g L^-1 of catalyst, 6 mM of PS, 5 mg L^-1 of MNZ, and pH of 3. The removal efficiency of Total Organic Carbon (TOC) was 87.5 % under optimal conditions. According to kinetic equations, it was found that the MNZ degradation followed both kinetics (pseudo-first-order and Langmuir-Hinshelwood) based on the coefficient of determination (R²) of 0.949, 0.9716, 0.9073, 0.9721, and 0.9662 at concentrations of 5, 10, 15, 20, and 30, respectively. The surface reaction rate constant (K_c) and the adsorption equilibrium constant (K_L-H) of the Langmuir-Hinshelwood model were 0.81 (mg L^-1 min^-1) and 2.184 (L mg^-1), respectively. The free radical scavenging experiments were conducted to illustration the proposed mechanism, which shown that the SO₄^-• was the predominant radicals involved in MNZ degradation. Finally, the regeneration of the catalyst was investigated and showed that after five cycles of use and regeneration by chemical and thermal methods, this catalyst has acceptable chemical stability.