Development of a new ion-imprinted polymer (IIP) with Cd2+ ions based on divinylbenzene copolymers containing amidoxime groups

Application Prospect of Ion-Imprinted Polymers in Harmless Treatment of Heavy Metal Wastewater

With the rapid development of industry, the discharge of heavy metal-containing wastewater poses a significant threat to aquatic and terrestrial environments as well as human health. This paper provides a brief introduction to the basic principles of ion-imprinted polymer preparation and focuses on the interaction between template ions and functional monomers. We summarized the current research status on typical heavy metal ions, such as Cu(II), Ni(II), Cd(II), Hg(II), Pb(II), and Cr(VI), as well as metalloid metal ions of the As and Sb classes. Furthermore, it discusses recent advances in multi-ion-imprinted polymers. Finally, the paper addresses the challenges faced by ion-imprinted technology and explores its prospects for application.

Use of the dummy approach for the synthesis of ion imprinted polymers with Ni(II) or Zn(II) as template ion for the solid-phase extraction of Cu(II)

There is a strong interest in monitoring copper in environmental waters, but its direct analysis suffers from strong matrix interferences. This is why, a sample pretreatment based on solid-phase extraction (SPE) is often used but conventional sorbents usually lack specificity. It is overcome with ion-imprinted polymers (IIPs). This work evaluates for the first time the use of the dummy approach for the synthesis of Cu(II)-targeting IIPs. Two analog ions Ni(II) and Zn(II) were tested as templates and the resulting IIPs were packed in SPE cartridges. The SPE procedure was designed by optimizing a washing step following the sample percolation, to eliminate the interfering ions retained on the IIP by non-specific interactions. To optimize the washing step, solutions at different pH or containing tris(hydroxymethyl)aminomethane as a complexing agent at different concentrations were tested and combined. Zn-IIP appeared more promising than Ni-IIP, showing excellent specificity and a high selectivity. Its retention capacity was determined to be 100 µg/g, and different isotherm models were evaluated to fit with the adsorption data. Finally, applications to mineral and sea waters were successfully completed and led to high and repeatable extraction recoveries for Cu(II) (88 ± 1% and 83 ± 3%, respectively).

Development of ion-imprinted polymers for the selective extraction of Cu(II) ions in environmental waters

Several ion-imprinted polymers (IIPs) were synthesized via bulk polymerization with Cu(II) as template ion, methacrylic acid as functional monomer, ethylene glycol dimethacrylate as crosslinking agent, and azobisisobutyronitrile as initiator in acetonitrile or methanol as porogen solvent. Non-imprinted polymers (NIPs) were similarly synthesized but without Cu(II). After grounding and sieving, the template ions were removed from IIPs particles through several cycles of elimination in 3 M HCl. All NIPs were equally subjected to this acid treatment with the exception of one NIP, called unwashed NIP. The resulting IIP/NIP particles were packed in solid phase extraction (SPE) cartridges for characterization. The SPE protocol was designed by optimizing a washing step following the sample percolation to eliminate potential interfering ions prior to the elution of Cu(II), all fractions analyzed by inductively coupled plasma mass spectrometry. The best IIP showed a high specificity (recovery of Cu(II) vs. interfering ions) and a good selectivity (retention on IIP vs. NIP). Its adsorption capacity was determined to be 63 μg g^-1. Then, a volume of 50 mL was percolated with 30 mg of IIP, thus giving rise to an enrichment factor of 24. Finally, applications to real samples (mineral and sea waters) were successfully performed. In addition, Brunauer-Emmett-Teller analyses showed that the surface area of the washed NIP was almost double that of the unwashed one (140.70 vs. 74.49 m² g^-1), demonstrating for the first time that the post-treatment of a NIP after its synthesis may have a significant impact on its porous structure, and thus need to be more precisely detailed by authors in the future papers.

Preparation, Characterization of Cd(II) Ion-Imprinted Microsphere and Its Selectivity for Template Ion

Cadmium is one of the many toxic elements for humans even at low concentrations, and it could exist in the environment for a long time. The ion imprinting technique has gained much attention due to its selective recognition performance. In this study, a cadmium ion imprinted maleic acid-co-acrylonitrile polymeric microsphere (Cd-I-MA-co-AN) was synthesized via precipitation polymerization using Cd(II) as a template ion, acrylonitrile and maleic acid as functional monomers, divinylbenzene as a cross-linker, and potassium persulfate as an initiator. UV–vis, SEM and FTIR were used for characterization, and the adsorption conditions were observed and optimized. The adsorption capacity and selectivity of Cd-I-MA-co-AN for Cd(II) were analyzed by flame atomic absorption spectrometry (FAAS). The results documented that the optimal pH, flow rate and eluent were 6, 2 mL min−1 and 1 mol L−1 nitric acid, respectively. Compared with the non-ion imprinted maleic acid-co-acrylonitrile polymeric microsphere (NI-MA-co-AN), Cd-I-MA-co-AN had a higher adsorption capacity. The saturated adsorption capacities of Cd-I-MA-co-AN and NI-MA-co-AN were 20.46 mg g−1 and 7.64 mg g−1, respectively. The adsorption behavior of Cd-I-MA-co-AN fitted with the Freundlich isotherm model. The relative selectivity coefficients of Cd-I-MA-co-AN for Cd(II) in the presence of Cu(II), Mn(II), Ni(II) and Pb(II) were 3.79, 3.39, 3.90 and 3.31, respectively. The Cd-I-MA-co-AN showed good selectivity for Cd(II). In addition, a reusability study showed that Cd-I-MA-co-AN can be recycled ten times and has high recovery in natural water samples.