Pervaporation characteristics of PDMS/PMHS nanocomposite membranes inclusive multi-walled carbon nanotubes for improvement of acetic acid–methanol esterification reaction

Stimuli-Triggered Multishape, Multimode, and Multistep Deformations Designed by Microfluidic 3D Droplet Printing

Elastomers generally possess low Young's modulus and high failure strain, which are widely used in soft robots and intelligent actuators. However, elastomers generally lack diverse functionalities, such as stimulated shape morphing, and a general strategy to implement these functionalities into elastomers is still challenging. Here, a microfluidic 3D droplet printing platform is developed to design composite elastomers architected with arrays of functional droplets. Functional droplets with controlled size, composition, position, and pattern are designed and implemented in the composite elastomers, imparting functional performances to the systems. The composited elastomers are sensitive to stimuli, such as solvent, temperature, and light, and are able to demonstrate multishape (bow- and S-shaped), multimode (gradual and sudden), and multistep (one- and two-step) deformations. Based on the unique properties of droplet-embedded composite elastomers, a variety of stimuli-responsive systems are developed, including designable numbers, biomimetic flowers, and soft robots, and a series of functional performances are achieved, presenting a facile platform to impart diverse functionalities into composite elastomers by microfluidic 3D droplet printing.

Highly Damage-Resistant Thin Film Saturable Absorber Based on Mechanically Functionalized SWCNTs

Thin-film saturable absorbers (SAs) are extensively used in mode-locked fiber laser due to the robust and simple application methods that arise because SAs are alignment-free and self-standing. Single-walled carbon nanotubes (SWCNTs) are the most suitable low dimensional material uesd for SAs because of their high nonlinearity and the wavelength control of absorption based on tube diameters. The most challenging problem with the use of CNT-based thin film SAs is thermal damage caused during high power laser operation, which mainly occurs due to aggregation of CNTs. We have demonstrated improved thermal damage resistance and enhanced durability of a film-type SA based on functionalization of SWCNTs, which were subjected to a mechanical functionalization procedure to induce covalent structural modifications on the SWCNT surface. Increased intertube distance was shown by X-ray diffraction, and partial functionalization was shown by Raman spectroscopy. This physical change had a profound effect on integration with the host polymer and resolved aggregation problems. A free-standing SA was fabricated by the drop casting method, and improved uniformity was shown by scanning electron microscopy. The SA was analyzed using various structural and thermal evaluation techniques (Raman spectroscopy, thermogravimetric analysis, etc.). Damage tests at different optical powers were also performed. To the best of our knowledge, a comprehensive analysis of a film-type SA is reported here for the first time. The partially functionalized SWCNT (fSWCNT) SA shows significant structural integrity after intense damage tests and a modulation depth of 25.3%. In passively mode-locked laser operation, a pulse width of 152 fs is obtained with a repetition rate of 77.8 MHz and a signal-to-noise ratio of  75 dB. Stable operation of the femtosecond fiber laser over 200 h verifies the enhanced durability of the fSWCNT SA.