Magnesite and dolomite micro-particles: preparation, physical properties and application in bio-based polymer composite

The Use of Diatomite-Based Composites for the Immobilization of Toxic Heavy Metals in Industrial Wastes Using Post-Flotation Sediment as an Example

Composite materials based on diatomite (DT) with the addition of biochar (BC), dolomite (DL), and bentonite (BN) were developed. The effect of chemical modification on the chemical structure of the resulting composites was investigated, and their influence on heavy metal immobilization and the ecotoxicity of post-flotation sediments was evaluated. It was demonstrated that the chemical modifications resulted in notable alterations to the chemical properties of the composites compared to pure DT and mixtures of DT with BC, DL, and BN. An increase in negative charge was observed in all variants. The addition of BC introduced valuable chemically and thermally resistant organic components into the composite. Among the chemical modifications, composites with the addition of perlite exhibited the lowest values of negative surface charge, which was attributed to the dissolution and transformation of silicon compounds and traces of kaolinite during their initial etching with sodium hydroxide. The materials exhibited varying efficiencies in metal immobilization, which is determined by both the type of DT additive and the type of chemical modification applied. The greatest efficacy in reducing the mobility of heavy metals was observed in the PFS with the addition of DT and BC without modification and with the addition of DT and BC after the modification of H2SO4 and H2O2: Cd 8% and 6%; Cr 71% and 69%; Cu 12% and 14%; Ni 10% and Zn 15%; and 4% and 5%. In addition, for Zn and Pb, good efficacy in reducing the content of mobile forms of these elements was observed for DT and DL without appropriate modification: 4% and 20%. The highest reduction in ecotoxicity was observed in the PFS with the addition of DT and BC, followed by BN and DL, which demonstrated comparable efficacy to materials with DT and BN.

On the Use of Dolomite as a Mineral Filler and Co-Filler in the Field of Polymer Composites: A Review

Polymers are being used in many applications all around the world. However, there are some drawbacks in the properties of polymers that could hamper their usage in certain applications. Therefore, a new material polymer composite was introduced. A polymer composite is a polymer-based material with the addition of a filler. Many researchers have reported the improvement in the properties of a polymer when a filler was introduced. This helps minimize the disadvantages of using a polymer. As a result, polymer composite products can be used in many industries, such as automobile, aerospace, biomedical, and packaging. Fillers derived from natural minerals, such as dolomite, are among the best reinforcement materials for polymeric materials because they are plentiful and low cost, have high rigidity and hardness, and even have tailorable surface chemistry. The use of dolomite as a filler in a polymer composite system has gained increasing attention in recent years after researchers successfully proved that it is capable of improving the mechanical, physical, and thermal properties of various polymeric materials. However, chemical or physical treatment/modification of raw dolomite is needed in order to prepare it as an efficient reinforcing filler. This procedure helps to improve the performance of the resultant polymer composites. This article reviews the usage of dolomite as a filler in a variety of polymeric materials and how it improved the performance of the polymer composite materials. It also highlights several methods that have been used for the purpose dolomite’s treatment/modification. Furthermore, the role of dolomite as a co-filler or a hybrid filler in a polymer composite system is also discussed, revealing the great potential and prospect of this mineral filler in the field of polymer composites for advanced applications.