Synthesis of xanthan gum/trimethyl chitosan interpolyelectrolyte complex as pH-sensitive protein carrier

Enhancing xanthan hydrogels for water shutoff treatment in sandstone oil reservoirs through core flooding and CCD approach

This study examines the efficacy of xanthan gum, as a natural polymer, in creating a suitable hydrogel for controlling water production in reservoirs. The study employed the Central Composite Design (CCD) method through bottle tests to evaluate the effect of different compounds on the gelation time and duration of syneresis. To explore the effectiveness of the xanthan-based hydrogels, swelling tests as well as dynamic core flooding tests are performed. Additionally, to enlighten the performance of the xanthan hydrogels, comprehensive set of characterization tests are performed. Nevertheless, the swelling test results indicated that increasing the polymer concentration led to an increase in swelling. SEM images of the dried hydrogel confirmed the structural integrity and uniformity of the networked architecture, demonstrating an increase in thickness and density. Furthermore, four hydrogel samples with the most appropriate specification in the bottle and swelling tests were chosen for core flooding tests. The results demonstrated that injecting the sample including; polymer@8000ppm, crosslinking agent ratio@0.15, and nanosilica@0.05 wt%, as an optimal sample, caused a 71.9% decrease in water production. Finally, the residual factor of 2.289, indicated the effective efficiency of xanthan-chromium hydrogel in the presence of nanosilica to reduce water permeability compared to oil in sandstone reservoir.

Development of a novel polyelectrolyte complex nanocomposite of modified chitosan and karaya gum for co-delivery of 5-fluorouracil and curcumin for cancer therapy

Combination chemotherapy is a relatively recent and preferred method for cancer treatment. Sustained delivery of dual drugs can be achieved with a suitable matrix. In the present work, a pH-responsive polyelectrolyte complex (PEC) of trimethylchitosan and carboxymethylkaraya gum containing silver nanoparticles (SNps) has been developed as a matrix material for co-delivery of the drugs, 5-fluorouracil (5-Fu) and curcumin (Cur). The experimental conditions have been optimized for high yield and high swelling of the PEC nanocomposite. 1H-NMR, FT-IR, FE-SEM, P-XRD, HR-TEM, EDS, TGA techniques and zeta potential measurements have been employed in the physico-chemical characterization of the nanocomposite material. The presence of SNps with an average diameter of 16.57 ± 1.25 nm influenced the surface structure and hydrophilicity of the PEC. The swelling study indicated higher swelling at pH 7.4 than at pH 1.2. The two drugs, 5-Fu and Cur, were successfully entrapped and released from the nanocomposite in a sustained manner. Cytotoxicity studies performed with the MCF-10A cell line confirmed the biocompatibility of the nanocomposite and those with the MCF-7 cell line indicated the synergistic effect of the dual drugs in controlling cancer cell growth. The overall study indicates the usefulness of the PEC nanocomposite made from modified polysaccharides, chitosan and karaya gum as a promising material for the development of a dual drug delivery system for cancer treatment.

Recent advances in modified chitosan-based drug delivery systems for transmucosal applications: A comprehensive review

Recently, transmucosal drug delivery systems (TDDSs) have been extensively studied because they protect therapeutic agents from degradation; improve drug residence time at the mucosal membranes; and facilitate sustained drug release for a prolonged period. Chitosan is a well-researched polymeric excipient due to its biocompatibility, non-toxicity, biodegradability, mucoadhesive, antimicrobial, and low immunogenicity. Its limited mucoadhesiveness in the physiological environment necessitated its chemical modification. This review highlights the recent advances in the chemical modification of chitosan with various chemical groups to generate various functionalized chitosan derivatives, such as thiolated, acrylated, methacrylated, boronated, catechol, and maleimide-functionalized chitosans with superior mucoadhesive capabilities compared to the parent chitosan. Moreover, it presents the different prepared dosage forms, such as tablets, hydrogels, films, micro/nanoparticles, and liposomes/niosomes for drug administration within various mucosal routes including oral, buccal, nasal, ocular, colonic, intravesical, and vaginal routes. The reported data from preclinical studies of these pharmaceutical formulations have revealed the controlled and target-specific delivery of therapeutics because of their formation of covalent bonds with thiol groups on the mucosal surface. All functionalized chitosan derivatives exhibited long drug residence time on mucosal surfaces and sustainable drug release with excellent cellular permeability, drug efficacy, and biocompatibility. These promising data could be translated from the research laboratories to the clinics with consistent and intensive research effort.

Synthesis of novel antibacterial and biocompatible polymer nanocomposite based on polysaccharide gum hydrogels

According to recent studies on the benefits of natural polymer-based hydrogels in biomedical applications, gellan gum (GG)/acacia gum (AG) hydrogel was prepared in this study. In order to regulate the mechanical behavior of the hydrogel, graphite carbon nitride (g-C3N4) was included in the hydrogel matrix. In addition, metal oxide nanoparticles ZnCuFe2O4 were added to the composite for antibacterial activity. The prepared GG-AG hydrogel/g-C3N4/ZnCuFe2O4 nanobiocomposite was characterized by using FE-SEM, FTIR, EDX, XRD and TGA. The nanobiocomposite exhibited spherical morphology, which was related to the incorporation of the metal oxide nanoparticles. GG-AG hydrogel/g-C3N4/ZnCuFe2O4 nanobiocomposite showed 95.11%, 92.73% and 88.97% biocompatibility toward HEK293T cell lines within 24 h, 48 h and 72 h incubation, respectively, which indicates that this nanobiocomposite is completely biocompatible with healthy cells. Also, the nanobiocomposite was able to inhibit Pseudomonas aeruginosa biofilm growth on its surface up to 87%. Rheological studies showed that the nanobiocomposite has a viscoelastic structure and has a water uptake ratio of 93.2%. In comparison with other similar studies, this nanobiocomposite has exhibited superior antibacterial activity complete biocompatibility and proper mechanical properties, high swelling and water absorption capability. These results indicate that GG-AG hydrogel/g-C3N4/ZnCuFe2O4 nanocomposite can be considered as a potential candidate for biomedical applications such as tissue engineering and wound healing.

Albumin-based nanosystem for dual-modality imaging-guided chem-phototherapy against immune-cold triple-negative breast cancer

Triple-negative breast cancer is a highly aggressive and metastatic tumor; diagnosing it in the early stages is still difficult, and the prognosis for conventional radio-chemotherapy and immunotreatment is not promising due to cancer's immunosuppressive microenvironment. The utilization of protein-based nanosystem has proven to be effective in delivering agents with limited adverse effects, yet the combination of diagnosis and treatment remains a difficult challenge. This research took advantage of natural albumin and organic molecules to construct a self-assemble core-shell nanostructure combining with superparamagnetic iron oxide nanocrystals and heptamethine cyanine dye IR780 through non-covalent interactions. This nanocomposite successfully decreased the transverse relaxation time of the magnetic resonance hydrogen nucleus, resulting in outstanding T2 imaging, as well as emitting near-infrared II fluorescence, thereby the resulting dual-modality imaging tool was applied to improve diagnostic competency. It is noteworthy that the nanocomposites exhibited impressive enzyme-like catalytic and photothermal capabilities, resulting in a successful activation of the immune system to efficiently suppress distant metastatic lesions in vivo. Consequently, this nano-drug-based therapy could be an advantageous asset in reinforcing the immune system and hindering the growth and reappearance of the immune-cold breast cancer.

Bimetallic (Ag and MgO) nanoparticles, Aloe vera extracts loaded xanthan gum nanocomposite for enhanced antibacterial and in-vitro wound healing activity

We prepared nanocomposite (XG-AVE-Ag/MgO NCs) using the bimetallic Ag/MgO NPs, Aloe vera extract (AVE), and biopolymer (Xanthan gum (XG)) to archive a synergetic antibacterial and wound healing activity. The changes in XRD peaks at 20° of XG-AVE-Ag/MgO NCs indicated the XG encapsulation. The XG-AVE-Ag/MgO NCs showed the zeta potential and zeta size of 151.3 ± 3.14 d·nm and -15.2 ± 1.08 mV with a PDI of 0.265 while TEM showed an average size of 61.19 ± 3.89. The EDS confirmed the co-existence of Ag, Mg, carbon, oxygen, and nitrogen in NCs. XG-AVE-Ag/MgO NCs displayed higher antibacterial activity in terms of zone of inhibition, at 15.00 ± 0.12 mm for B. cereus and 14.50 ± 0.85 mm for E. coli. Moreover, NCs exhibited MICs of 2.5 μg/mL for E. coli, and 0.62 μg/mL for B. cereus. The in vitro cytotoxicity and hemolysis assays indicated the non-toxic properties of XG-AVE-Ag/MgO NCs. The higher wound closure activity was observed with the treatment of XG-AVE-Ag/MgO NCs (91.19 ± 1.87 %) compared to the control, untreated group (68.68 ± 3.54 %) at 48 h of incubation. These findings revealed that XG-AVE-Ag/MgO NCs was promising non-toxic, antibacterial, and wound-healing agent that deserved further in-vivo studies.

Synthesis and characterization of poly(3-hydroxybutyrate)/chitosan-graft poly (acrylic acid) conjugate hyaluronate for targeted delivery of methotrexate drug to colon cancer cells

Anti-cancer medications that are delivered specifically to the tumor site possess greater efficacy with less negative effects on the body. So, the current research relies on a novel method for intercalating the anticancer medication methotrexate in poly(3-hydroxybutyrate)/chitosan-graft poly (acrylic acid) conjugated with sodium hyaluronate. The graft copolymers were synthesized through persulfate-initiated grafting of acrylic acid onto a binary mixture of various amounts of chitosan and poly(3-hydroxybutyrate) (2/1, 1/1 and 1/2, w/w) using microwave irradiation. The graft copolymer was conjugated with sodium hyaluronate for targeted delivery of methotrexate drug specifically to colon cancer cell lines (Caco-2). The graft copolymers were characterized by many physical techniques. The maximum drug loading efficiency was observed in case of the graft copolymer/hyaluronate rich in chitosan content 69.7 ± 2.7 % (4.65 mg/g) with a sustained release about 98.6 ± 1.12 %, at pH 7.4. The findings of severe cytotoxicity having a value of the IC₅₀ of 11.7 μg/ml, a substantial proportion of apoptotic cells (67.88 %), and an elevated level of DNA breakage inside the treated Caco-2 cells verified the effective release of methotrexate from the loaded copolymer matrix. Besides, the high stability and biological activity of the released drug was exhibited through occurrence of greater increment of reactive oxygen species and effect on the extent of expression of genes connected to apoptosis and anti-oxidant enzymes within the treated cells. Ultimately, this system can be recommended as potent carrier for methotrexate administration to targeted cancerous cells in the colon.

Synthesis of biodegradable antimicrobial pH-sensitive silver nanocomposites reliant on chitosan and carrageenan derivatives for 5-fluorouracil drug delivery toward HCT116 cancer cells

The current research relies on a one-pot green biosynthesis of silver nanoparticles (SNPs) with various ratios of silver (Ag) in the existence of N, N, N-trimethyl chitosan chloride (TMC) and carboxymethyl kappa-carrageenan (CMKC), to investigate the effectiveness of the synthesized silver nanocomposites (SNCs) as pH sensitive biodegradable carrier for orally intestinal delivery of 5-fluorouracil (5-FU) drug. FTIR, XRD, TEM and FE-SEM/EDX methods were utilized to demonstrate the structure of the prepared polyelectrolyte complex PEC (TMC/CMKC) and SNCs (TMC/CMKC/Ag). The results showed that the 5-FU encapsulation effectiveness inside all of the prepared SNCs samples was improved by increasing the concentration of Ag, reaching 92.16 ± 0.57 % with 3 % Ag. In vitro release behavior of 5-FU loaded SNC 3 % (TMC/CMKC/Ag 3 %), displayed slow and sustained release reaching 96.3 ± 0.81 % up to 24 h into pH 7.4 medium. The successful release of 5-FU from the loaded SNC 3 % was confirmed through occurrence of strong cytotoxicity, with an IC₅₀ value of 31.15 μg/ml, and high % of apoptotic cells (30.66 %) within the treated HCT116 cells. Besides, SNC 3 % showed good biodegradability and antimicrobial properties against different bacterial strains. Overall, SNC 3 % can be suggested as an effective system for both controlled drug delivery and antibacterial action.

Preparation and evaluation of the antimicrobial activity of sodium alginate-grafted diphenylamine embedded with silver nanoparticles

Antibiotic nanocomposite polymers show great promise in treating a variety of pathogens that cause widespread disease. Sodium alginate-grafted diphenylamine (NaAlg-g-DPA) embedded with different ratios of silver nanoparticles (AgNPs) was fabricated and characterized through different techniques including FTIR, XRD, and SEM techniques for investigating the antimicrobial activity. XRD confirmed the crystallinity of these compounds, and the average crystal size of Na Alg-g-DPA/Ag was estimated to be 48.6 nm. Then it was applied as an antimicrobial agent and evaluated through two ways (inhibition zone and MIC techniques) against Staphylococcus aureus as gram-positive bacteria with an inhibition zone of 19.31.6 mm and 18.60.63 mm against Escherichia coli as gram-negative bacteria while with increasing the Ag ratio 2:1 there was an enhancement in their biological activity to be 21.90.69 mm against Staphylococcus aureus and with an inhibition zone of 21.32.1 mm against Escherichia coli. The outcomes of this investigation are important for the development of new composite materials with antibacterial properties for industrial applications.

Synthesis, characterization, anticancer, and antioxidant activities of chitosan Schiff bases bearing quinolinone or pyranoquinolinone and their silver nanoparticles derivatives

In this work, new chitosan-based Schiff bases were synthesized by the reaction of chitosan with quinolinone and pyranoquinolinone giving CSQ, and CSP, respectively. The novel Chitosan Schiff bases were grafted on silver nanoparticles providing CSQ/Ag, CSP/Ag structures. Characterization of isolated compounds was carried out by FT-IR, TGA, XRD, SEM, and TEM. The target compounds CSQ, CSP, CSQ/Ag, and CSP/Ag were evaluated as antitumor agents against three cancer cell lines, liver (HepG-2), colon (HCT-116), and breast (MCF-7). Compound CSQ/Ag disclosed potent cytotoxic effect with IC50 values in the range of 41.9–55.1 μg/ml in comparison with 5-fluorouracil against different cancer cell lines. Besides, the antioxidant activity of chitosan and its quinolinone and pyranoquinolinone analogues was assessed as radical scavengers versus 1,1-diphenyl-2-picrylhydrazyl radicals (DPPH%). The compound CSQ/Ag emerged as the most active member in scavenging the DPPH radicals. The obtained findings proved that the new Schiff bases/silver nanoparticles of chitosan showed higher antiproliferative and antioxidant activities than the blank CS and would be highly applicable in biomedical fields.

Graphical abstract