The effect of montmorillonite in graphene oxide/chitosan nanocomposite on controlled release of gemcitabine

Chitosan, derivatives, and its nanoparticles: Preparation, physicochemical properties, biological activities, and biomedical applications - A comprehensive review

Chitosan, derived from the deacetylation of chitin, is the second most widely used natural polymer, valued for its nontoxic, biocompatible, and biodegradable properties. These attributes have driven extensive research into diverse applications of chitosan and various derivatives. The key characteristics of chitosan muco-adhesion, permeability enhancement, drug release modulation, and antimicrobial activity are primarily due to its amino and hydroxyl groups. However, the limited solubility of raw chitosan in water and most organic solvents has posed challenges for broader application. Numerous chemically modified derivatives have been developed to address these inadequacies with improved physical and chemical properties. Among these derivatives, chitosan nanoparticles have emerged as versatile drug carriers with precise release kinetics and the capacity for targeted delivery, greatly enhancing drug efficacy and safety profiles for therapeutic applications. Due to these unique physicochemical properties, chitosan and chitosan nanoparticles are promising for improved drug delivery, vaccine administration, transplantation, gene therapy, and diagnostics. This review examines the physicochemical properties and bioactivities of chitosan and chitosan nanoparticles, emphasizing their broad-ranging biomedical applications.

Mapping the formation of gemcitabine-immunoglobulin nanoparticles and the subsequent activity against pancreatic cancer cells

This research involved the synthesis of Gemcitabine-immunoglobulin nanoparticles (GIgG NPs) and the exploration of their apoptotic mechanisms in targeting Panc-1 cancer cells. A desolvation technique for synthesis was applied, resulting in the heterogeneous clustering of IgG molecules with several Gemcitabine molecules. The DLE and DEE were determined to be 6.8 ± 0.32 % and 93.28 ± 2.88 %, respectively. Dynamic Light Scattering (DLS) and imaging analysis indicated a size of 122.1 nm, a PDI of 0.21, and a zeta potential of -23.78 mV. Fluorescence spectroscopy revealed a reduction and shift in the intrinsic fluorescence of IgG as the Gemcitabine concentration increased. ITC data showed that the binding sites (n) for IgG were 0.96, suggesting roughly one Gemcitabine binding site per IgG molecule, while for GIgG NPs, the n value was measured at 0.84. The binding constant (Kb) for IgG-Gemcitabine was 2.06 × 105 M-1, while for GIgG NPs, it was 1.26 × 105 M-1. The Gibbs free energy (ΔG°) for IgG-Gemcitabine was -30.41 kJ/mol, while for GIgG NPs it was -29.18 kJ/mol. Moreover, negative ΔH° and positive ΔS° values suggested that hydrogen bonds and hydrophobic interactions could facilitate the formation of the complex. Molecular docking analysis indicated that nonpolar interactions and intermolecular solvation play a role in the binding of Gemcitabine to IgG. The release kinetics aligned closely with the Korsmeyer-Peppas and Higuchi models for the pH-sensitive release of Gemcitabine. The IC50 of Gemcitabine for Panc-1 cancer cells dropped seven-fold when encapsulated in GIgG NPs, demonstrating enhanced cytotoxicity and selective targeting of cancer cells. Mechanisms for inducing apoptosis were evident via increased effectiveness, gene expression alteration, caspase activation, and oxidative stress. These results indicate that GIgG NPs could serve as a potential therapeutic option for the targeted treatment of pancreatic cancer.

Chitosan-graphene quantum dot-based molecular imprinted polymer for oxaliplatin release

Molecularly imprinted polymers (MIPs) have garnered the interest of researchers in the drug delivery due to their advantages, such as exceptional durability, stability, and selectivity. In this study, a biocompatible MIP drug adsorption and delivery system with high loading capacity and controlled release, was prepared based on chitosan (CS) and graphene quantum dots (GQDs) as the matrix, and the anticancer drug oxaliplatin (OXAL) as the template. Additionally, samples without the drug (non-imprinted polymers, NIPs) were created for comparison. GQDs were produced using the hydrothermal method, and samples underwent characterization through FTIR, XRD, FESEM, and TGA. Various experiments were conducted to determine the optimal pH for drug adsorption, along with kinetic and isotherm studies, selectivity assessments, in vitro drug release and kinetic evaluations. The highest drug binding capacity was observed at pH 6.5. The results indicated the Lagergren-first-order kinetic model (with rate constant of 0.038 min-1) and the Langmuir isotherm (with maximum adsorption capacity of 17.15 mg g-1) exhibited better alignment with the experimental data. The developed MIPs displayed significant selectivity towards OXAL, by an imprinting factor of 2.88, in comparison to two similar drugs (cisplatin and carboplatin). Furthermore, the analysis of the drug release profile showed a burst release for CS-Drug (87% within 3 h) at pH 7.4, where the release from the CS-GQD-Drug did not occur at pH 7.4 and 10; instead, the release was observed at pH 1.2 in a controlled manner (100% within 28 h). Consequently, this specific OXAL adsorption and delivery system holds promise for cancer treatment.

Revolutionizing Cancer Care: Advances in Carbon-Based Materials for Diagnosis and Treatment

Cancer involves intricate pathological mechanisms marked by complexities such as cytotoxicity, drug resistance, stem cell proliferation, and inadequate specificity in current chemotherapy approaches. Cancer therapy has embraced diverse nanomaterials renowned for their unique magnetic, electrical, and optical properties to address these challenges. Despite the expanding corpus of knowledge in this area, there has been less advancement in approving nano drugs for use in clinical settings. Nanotechnology, and more especially the development of intelligent nanomaterials, has had a profound impact on cancer research and treatment in recent years. Due to their large surface area, nanoparticles can adeptly encapsulate diverse compounds. Furthermore, the modification of nanoparticles is achievable through a broad spectrum of bio-based substrates, including DNA, aptamers, RNA, and antibodies. This functionalization substantially enhances their theranostic capabilities. Nanomaterials originating from biological sources outperform their conventionally created counterparts, offering advantages such as reduced toxicity, lower manufacturing costs, and enhanced efficiency. This review uses carbon nanomaterials, including graphene-based materials, carbon nanotubes (CNTs) based nanomaterials, and carbon quantum dots (CQDs), to give a complete overview of various methods used in cancer theranostics. We also discussed their advantages and limitations in cancer diagnosis and treatment settings. Carbon nanomaterials might significantly improve cancer theranostics and pave the way for fresh tumor diagnosis and treatment approaches. More study is needed to determine whether using nano-carriers for targeted medicine delivery may increase material utilization. More insight is required to explore the correlation between heightened cytotoxicity and retention resulting from increased permeability.

Fabrication and characterization of metformin-loaded PLGA/Collagen nanofibers for modulation of macrophage polarization for tissue engineering and regenerative medicine

In tissue engineering (TE) and regenerative medicine, the accessibility of engineered scaffolds that modulate inflammatory states is extremely necessary. The aim of the current work was to assess the efficacy of metformin (MET) incorporated in PLGA/Collagen nanofibers (Met-PLGA/Col NFs) to modulate RAW264.7 macrophage phenotype from pro-inflammatory status (M1) to anti-inflammatory status (M2). Given this, MET-PLGA/Col NFs were fabricated using an electrospinning technique. Structural characterization such as morphology, chemical and mechanical properties, and drug discharge pattern were assessed. MTT assay test exposed that MET-PLGA/Col NFs remarkably had increased cell survival in comparison with pure PLGA/Collagen NFs and control (p < 0.05) 72 h after incubation. Based on the qPCR assay, a reduction in the expression of iNOS-2 and SOCS3 was found in the cells seeded on MET-PLGA/Col NFs, demonstrating the substantial modulation of the M1 phenotype to the M2 phenotype. Moreover, it was determined a main decrease in the pro-inflammatory cytokines and mediator's expression but the growth factors amount related to anti-inflammatory M2 were meaningfully upregulated. Finally, MET-PLGA/Col NFs possibly will ensure a beneficial potential for effective variation of the macrophage response from an inflammatory phase (M1) to a pro-regenerative (M2) phase.

Oral Targeted Delivery of Imatinib by pH Responsive Copolymer Modulates Liver Fibrosis in the Mice Model

Liver fibrosis is a significant cause of morbidity and mortality without approved treatment. The therapeutic effects of Imatinib as a tyrosine kinase inhibitor on reversing liver fibrosis have already been shown. However, considering the conventional route of Imatinib administration, the amount of drug to be used is very high, and its side effects are raised. Therefore, we designed an efficient pH-sensitive polymer for the targeted delivery of Imatinib in treating a carbon tetrachloride (CCl4)-induced liver fibrosis. This nanotherapeutic system-based Vitamin A (VA)-modified Imatinib-loaded poly (lactic-co-glycolic acid)/Eudragit S100 (PLGA-ES100) has been successfully fabricated by adapting the solvent evaporation technique. The applying ES100 on the surface of our desired nanoparticles (NPs) protects drug release at the acidic pH of the gastric and guarantees the effective release of Imatinib at a higher pH of the intestine. Besides, VA-functionalized NPs could be an ideal efficient drug delivery system due to the high capacity of hepatic cell lines to absorb VA. For induction of liver fibrosis, CCL4 was intraperitoneally (IP) injected twice a week for six weeks in BALB/c mice. Oral administration of VA-targeted PLGA-ES100 NPs loaded with Rhodamine Red™ by live animal imaging showed a preferential accumulation of the selected NPs in the liver of mice. Besides, administrating targeted Imatinib-loaded NPs significantly decreased serum levels of ALT, and AST, and also reduced the expression of extracellular matrix components, including collagen I, collagen III, and α-SMA, considerably. Interestingly, histopathological evaluation of liver tissues through H&E and Masson's trichrome staining showed that oral administration of targeted Imatinib-loaded NPs reduced hepatic damage by enhancing hepatic structure condition. Also, the Sirius-red staining indicated a reduction in collagen expression during treatment with targeted NP containing Imatinib. The immunohistochemistry result on liver tissue shows a significant decrease in the expression of α-SMA in groups treated with targeted NP. In the meantime, administration of a very scarce dose of Imatinib via targeted NP caused a substantial decline in the expression of fibrosis marker genes (Collagen I, Collagen III, α-SMA). Our results confirmed that novel pH-sensitive VA-targeted PLGA-ES100 NPs could efficiently deliver Imatinib to the liver cells. Loading Imatinib in the PLGA-ES100/VA might overcome many challenges facing conventional Imatinib therapy, including gastrointestinal pH, the low concentration at the target region, and toxicity.

Carbon Nanomaterials (CNMs) in Cancer Therapy: A Database of CNM-Based Nanocarrier Systems

Carbon nanomaterials (CNMs) are an incredibly versatile class of materials that can be used as scaffolds to construct anticancer nanocarrier systems. The ease of chemical functionalisation, biocompatibility, and intrinsic therapeutic capabilities of many of these nanoparticles can be leveraged to design effective anticancer systems. This article is the first comprehensive review of CNM-based nanocarrier systems that incorporate approved chemotherapy drugs, and many different types of CNMs and chemotherapy agents are discussed. Almost 200 examples of these nanocarrier systems have been analysed and compiled into a database. The entries are organised by anticancer drug type, and the composition, drug loading/release metrics, and experimental results from these systems have been compiled. Our analysis reveals graphene, and particularly graphene oxide (GO), as the most frequently employed CNM, with carbon nanotubes and carbon dots following in popularity. Moreover, the database encompasses various chemotherapeutic agents, with antimicrotubule agents being the most common payload due to their compatibility with CNM surfaces. The benefits of the identified systems are discussed, and the factors affecting their efficacy are detailed.