Rapid, efficient and precise allele replacement in the fission yeast Schizosaccharomyces pombe

Automated plasmid design for marker-free genome editing in budding yeast

Scarless genome editing in budding yeast with elimination of the selection marker has many advantages. Some markers such as URA3 and TRP1 can be recycled through counterselection. This permits seamless genome modification with pop-in/pop-out, in which a DNA construct first integrates in the genome and, subsequently, homologous regions recombine and excise undesired sequences. Popular approaches for creating such constructs use oligonucleotides and PCR. However, the use of oligonucleotides has many practical disadvantages. With the rapid reduction in price, synthesizing custom DNA sequences in specific plasmid backbones has become an appealing alternative. For designing plasmids for seamless pop-in/pop-out gene tagging or deletion, there are a number of factors to consider. To create only the shortest DNA sequences necessary, avoid errors in manual design, specify the amount of homology desired, and customize restriction sites, we created the computational tool PIPOline. Using it, we tested the ratios of homology that improve pop-out efficiency when targeting the genes HTB2 or WHI5. We supply optimal pop-in/pop-out plasmid sequences for tagging or deleting almost all S288C budding yeast open reading frames. Finally, we demonstrate how the histone variant Htb2 marked with a red fluorescent protein can be used as a cell-cycle stage marker, alternative to superfolder GFP, reducing light toxicity. We expect PIPOline to streamline genome editing in budding yeast.

The nuclear poly(A)-binding protein Pab2/PABPN1 promotes heterochromatin assembly through the formation of Pab2 nuclear condensates

The assembly of constitutive heterochromatin is a prerequisite for maintaining genome stability. However, the mechanism of heterochromatin formation has yet to be completely understood. Here, we demonstrate a crucial role of the nuclear poly(A)-binding protein (PABP) Pab2/PABPN1 in promoting constitutive heterochromatin formation in the fission yeast Schizosaccharomyces japonicus. Histone H3 Lys 9 di- and tri-methylation, hallmarks of heterochromatin, are significantly reduced at centromeres in the absence of Pab2. Pab2 forms nuclear condensates through its RNA-recognition motif (RRM) and the intrinsically disordered domain (IDR), both of which bind to centromeric non-coding RNAs. Intriguingly, two key heterochromatin factors, the histone H3 Lys9 methyltransferase Clr4 and the Mi2-type chromatin remodeler Mit1, associate with centromeres in a Pab2-dependent manner. Pab2 interacts with two putative RNA-binding proteins, the ZC3H3 ortholog Red5 and the RBM26·27 ortholog Rmn1, both essential for heterochromatin formation. Deletion of the Pab2 N-terminal region, which disrupts this interaction, largely abolishes Pab2 function, underscoring the importance of this complex. Pab2 also associates and colocalizes with Ppn1 (a PPP1R10 ortholog), a component of the cleavage and polyadenylation specificity factor (CPSF) complex, and ppn1 mutations disrupt constitutive heterochromatin. Notably, both Ppn1 and Rmn1 are able to interact with Clr4. Our findings reveal that Pab2 plays a pivotal role in heterochromatin assembly by forming nuclear condensates through its RRM/IDR, and Pab2 condensates facilitate the recruitment of Clr4 and Mit1 to centromeres, potentially through its binding proteins, Ppn1 and Rmn1. This study provides new insights into the mechanisms underlying heterochromatin formation and highlights the importance of RNA-binding proteins and phase separation in this process.

Targeted Forward Genetics: Saturating Mutational Analyses of Specific Target Loci Within the Genome

Precise allele replacement by homologous recombination (also known as "gene targeting" or "genome editing") allows scientists to engineer altered DNA sequences, insertions, or deletions at specific locations in the genome. Such reverse genetics provides powerful tools to elucidate the structure and function of regulatory DNA elements, genes, RNAs, and proteins within their natural, endogenous context. Here, we describe in detail the methodology for Targeted Forward Genetics (TFG), which supports population-scale, saturating screens of allele replacements spanning thousands of base pairs at a specific target locus in the genome. The overall approach and detailed protocols, developed for the fission yeast Schizosaccharomyces pombe, are extensible to other organisms in which gene targeting is feasible.

Investigating Fission Yeast Mutagenesis Using Canavanine Sensitivity Assays

Fission yeast are genetically tractable and amenable to mutagenesis studies. Canavanine is a toxic antimetabolite that can be used to test mutation rate. Recent studies have shown that the molecular genetics of canavanine sensitivity are more complex than previously anticipated. However, genomics advances indicate that canavanine use to determine mutation remains an option. In this chapter, we provide methods to grow fission yeast and detect forward mutation in populations of canavanine-sensitive Schizosaccharomyces pombe. Wild-type S. pombe are functionally canavanine-sensitive and die in the presence of canavanine. These protocols use liquid cultures that are tested for density and viability through colony formation. The same cultures are plated onto canavanine-containing media. Cells are grown to find cells that can grow on the canavanine media. These resistant cells are compared to the number plated, and a mutation rate is calculated. While the protocol is straightforward, analysis and application of the data are evolving. These methods provide the ability to compare S. pombe mutant strains for the frequency and rate of mutation.

Short-homology-mediated PCR-based method for gene introduction in the fission yeast Schizosaccharomyces pombe

Schizosaccharomyces pombe is a commonly utilized model organism for studying various aspects of eukaryotic cell physiology. One reason for its widespread use as an experimental system is the ease of genetic manipulations, leveraging the natural homology-targeted repair mechanism to accurately modify the genome. We conducted a study to assess the feasibility and efficiency of directly introducing exogenous genes into the fission yeast S. pombe using Polymerase Chain Reaction (PCR) with short-homology flanking sequences. Specifically, we amplified the NatMX6 gene (which provides resistance to nourseothricin) using PCR with oligonucleotides that had short flanking regions of 20 bp, 40 bp, 60 bp and 80 bp to the target gene. By using this purified PCR product, we successfully introduced the NatMX6 gene at position 171 385 on chromosome III in S. pombe. We have made a simple modification to the transformation procedure, resulting in a significant increase in transformation efficiency by at least 5-fold. The success rate of gene integration at the target position varied between 20% and 50% depending on the length of the flanking regions. Additionally, we discovered that the addition of dimethyl sulfoxide and boiled carrier DNA increased the number of transformants by ~60- and 3-fold, respectively. Furthermore, we found that the removal of the pku70+ gene improved the transformation efficiency to ~5% and reduced the formation of small background colonies. Overall, our results demonstrate that with this modified method, even very short stretches of homologous regions (as short as 20 bp) can be used to effectively target genes at a high frequency in S. pombe. This finding greatly facilitates the introduction of exogenous genes in this organism.

Agar lot-specific inhibition in the plating efficiency of yeast spores and cells

The fission yeast Schizosaccharomyces pombe and the budding yeast Saccharomyces cerevisiae are highly diverged (530 mya), single-celled, model eukaryotic organisms. Scientists employ mating, meiosis, and the plating of ascospores and cells to generate strains with novel genotypes and to discover biological processes. Our three laboratories encountered independently sudden-onset, major impediments to such research. Spore suspensions and vegetative cells no longer plated effectively on minimal media. By systematically analyzing multiple different media components from multiple different suppliers, we identified the source of the problem. Specific lots of agar were toxic. We report that this sporadic toxicity affects independently the agar stocks of multiple vendors, has occurred repeatedly over at least three decades, and extends to species in highly diverged taxa. Interestingly, the inhibitory effects displayed variable penetrance and were attenuated on rich media. Consequently, quality control checks that use only rich media can provide false assurances on the quality of the agar. Lastly, we describe likely sources of the toxicity and we provide specific guidance for quality control measures that should be applied by all vendors as preconditions for their sale of agar.

Creating Meiotic Recombination-Regulating DNA Sites by SpEDIT in Fission Yeast Reveals Inefficiencies, Target-Site Duplications, and Ectopic Insertions

Recombination hotspot-activating DNA sites (e.g., M26, CCAAT, Oligo-C) and their binding proteins (e.g., Atf1-Pcr1 heterodimer; Php2-Php3-Php5 complex, Rst2, Prdm9) regulate the distribution of Spo11 (Rec12)-initiated meiotic recombination. We sought to create 14 different candidate regulatory DNA sites via bp substitutions in the ade6 gene of Schizosaccharomyces pombe. We used a fission yeast-optimized CRISPR-Cas9 system (SpEDIT) and 196 bp-long dsDNA templates with centrally located bp substitutions designed to ablate the genomic PAM site, create specific 15 bp-long DNA sequences, and introduce a stop codon. After co-transformation with a plasmid that encoded both the guide RNA and Cas9 enzyme, about one-third of colonies had a phenotype diagnostic for DNA sequence changes at ade6. PCR diagnostics and DNA sequencing revealed a diverse collection of alterations at the target locus, including: (A) complete or (B) partial template-directed substitutions; (C) non-homologous end joinings; (D) duplications; (E) bp mutations, and (F) insertions of ectopic DNA. We concluded that SpEDIT can be used successfully to generate a diverse collection of DNA sequence elements within a reporter gene of interest. However, its utility is complicated by low efficiency, incomplete template-directed repair events, and undesired alterations to the target locus.

Distance-dependent effects on CRISPR/Cas9-mediated genome editing in Schizosaccharomyces pombe compromise efficiency and create unsought alleles

Discrete DNA sites position meiotic recombination at hotspots. We sought to create four different, 15 bp long, candidate regulatory DNA sites within the ura4 reporter gene. Each effort employed a fission yeast-optimized CRISPR system (SpEDIT), optimal guide RNA, and one of four homologous recombination templates with 10 to 15 bp substitutions. Remarkably, every Ura - transformant analyzed had template-directed, PAM-disabling bp substitutions near (5-6 bp away from) the DSB but no DNA site-generating substitutions at distance (42-56 bp). An unsought novel allele, ura4-P127* , has two substitutions (C379T, C380A) that create a stop codon, rendering strains unable to grow without uracil.

Laboratory horror stories: Poison in the agars

The fission yeast Schizosaccharomyces pombe is a single-celled eukaryote that can be cultured as a haploid or as a diploid. Scientists employ mating, meiosis, and the plating of ascospores and cells to generate strains with novel genotypes and to discover biological processes. Our two laboratories encountered independently sudden-onset, major impediments to such research. Spore suspensions and vegetative cells no longer plated effectively on minimal media. By systematically analyzing multiple different media components from multiple different suppliers, we identified the source of the problem. Specific lots of agar, from different suppliers, were toxic. Interestingly, the inhibitory effect was attenuated on rich media. Consequently, quality control checks that use only rich media can provide false assurances on the quality of the agar. Lastly, we describe likely sources of the toxicity and we provide specific guidance for quality control measures that should be applied by all vendors as preconditions for their sale of agar.

A marker-free genome editing method in S. pombe using the delitto perfetto approach

The fission yeast, like budding yeast, offer an easy manipulation of their genome, despite their distinct biology. Most tools available in budding yeast are also available in fission yeast in versions taking into account the features of each organism. The delitto perfetto is a powerful approach, initially developed in S. cerevisiae , for in vivo site-directed mutagenesis. Here, we present an adaptation of the approach to S. pombe manipulation and demonstrate its applicability for a rapid, marker-free and efficient in vivo site-directed mutagenesis and N-terminal tagging of nonessential genes in fission yeast.

Identification of an integrase-independent pathway of retrotransposition

Retroviruses and long terminal repeat retrotransposons rely on integrase (IN) to insert their complementary DNA (cDNA) into the genome of host cells. Nevertheless, in the absence of IN, retroelements can retain notable levels of insertion activity. We have characterized the IN-independent pathway of Tf1 and found that insertion sites had homology to the primers of reverse transcription, which form single-stranded DNAs at the termini of the cDNA. In the absence of IN activity, a similar bias was observed with HIV-1. Our studies showed that the Tf1 insertions result from single-strand annealing, a noncanonical form of homologous recombination mediated by Rad52. By expanding our analysis of insertions to include repeat sequences, we found most formed tandem elements by inserting at preexisting copies of a related transposable element. Unexpectedly, we found that wild-type Tf1 uses the IN-independent pathway as an alternative mode of insertion.

Targeted Forward Genetics: Population-Scale Analyses of Allele Replacements Spanning Thousands of Base Pairs in Fission Yeast

Precise allele replacement (genome editing), without unwanted changes to the genome, provides a powerful tool to define the functions of DNA elements and encoded factors in their normal biological context. While CRISPR is now used extensively for gene targeting, its utility for precise allele replacement at population scale is limited because: (A) there is a strict requirement for a correctly positioned PAM motif to introduce recombinogenic dsDNA breaks (DSBs); (B) efficient replacements only occur very close to the DSBs; and (C) indels and off-target changes are frequently generated. Here we show, using a saturated mutation library with about 15,000 alleles of the ade6 gene of Schizosaccharomyces pombe, that pop-in, pop-out allele replacement circumvents these problems. Two rounds of selection ensure that clones arise by homologous recombination with the target locus. Moreover, the exceptionally high efficiency allows one to carry out the process in bulk, then screen individual clones for phenotypes and genotypes. Alleles were introduced successfully throughout the region targeted, up to 1,956 base pairs from the DSB. About 11% of mutant alleles were hypomorphic, demonstrating utility for analyses of essential genes and genetic elements. This process of “targeted forward genetics” can be used to analyze comprehensively, across thousands of base pairs within a specific target region, a variety of allelic changes, such as scanning amino acid substitutions, deletions, and epitope tags. The overall approach and optimized workflow are extensible to other organisms that support gene targeting.

Heterochromatin suppresses gross chromosomal rearrangements at centromeres by repressing Tfs1/TFIIS-dependent transcription

Heterochromatin, characterized by histone H3 lysine 9 (H3K9) methylation, assembles on repetitive regions including centromeres. Although centromeric heterochromatin is important for correct segregation of chromosomes, its exact role in maintaining centromere integrity remains elusive. Here, we found in fission yeast that heterochromatin suppresses gross chromosomal rearrangements (GCRs) at centromeres. Mutations in Clr4/Suv39 methyltransferase increased the formation of isochromosomes, whose breakpoints were located in centromere repeats. H3K9A and H3K9R mutations also increased GCRs, suggesting that Clr4 suppresses centromeric GCRs via H3K9 methylation. HP1 homologs Swi6 and Chp2 and the RNAi component Chp1 were the chromodomain proteins essential for full suppression of GCRs. Remarkably, mutations in RNA polymerase II (RNAPII) or Tfs1/TFIIS, the transcription factor that facilitates restart of RNAPII after backtracking, specifically bypassed the requirement of Clr4 for suppressing GCRs. These results demonstrate that heterochromatin suppresses GCRs by repressing Tfs1-dependent transcription of centromere repeats.

Structure of the replication regulator Sap1 reveals functionally important interfaces

The mechanism by which specific protein-DNA complexes induce programmed replication fork stalling in the eukaryotic genome remains poorly understood. In order to shed light on this process we carried out structural investigations on the essential fission yeast protein Sap1. Sap1 was identified as a protein involved in mating-type switching in Schizosaccharomyces pombe, and has been shown to be involved in programmed replication fork stalling. Interestingly, Sap1 assumes two different DNA binding modes. At the mating-type locus dimers of Sap1 bind the SAS1 sequence in a head-to-head arrangement, while they bind to replication fork blocking sites at rDNA and Tf2 transposons in a head-to-tail mode. In this study, we have solved the crystal structure of the Sap1 DNA binding domain and we observe that Sap1 molecules interact in the crystal using a head-to-tail arrangement that is compatible with DNA binding. We find that Sap1 mutations which alleviate replication-fork blockage at Tf2 transposons in CENP-B mutants map to the head-to-tail interface. Furthermore, several other mutations introduced in this interface are found to be lethal. Our data suggests that essential functions of Sap1 depend on its head-to-tail oligomerization.

Histone deacetylation promotes transcriptional silencing at facultative heterochromatin

It is important to accurately regulate the expression of genes involved in development and environmental response. In the fission yeast Schizosaccharomyces pombe, meiotic genes are tightly repressed during vegetative growth. Despite being embedded in heterochromatin these genes are transcribed and believed to be repressed primarily at the level of RNA. However, the mechanism of facultative heterochromatin formation and the interplay with transcription regulation is not understood. We show genome-wide that HDAC-dependent histone deacetylation is a major determinant in transcriptional silencing of facultative heterochromatin domains. Indeed, mutation of class I/II HDACs leads to increased transcription of meiotic genes and accumulation of their mRNAs. Mechanistic dissection of the pho1 gene where, in response to phosphate, transient facultative heterochromatin is established by overlapping lncRNA transcription shows that the Clr3 HDAC contributes to silencing independently of SHREC, but in an lncRNA-dependent manner. We propose that HDACs promote facultative heterochromatin by establishing alternative transcriptional silencing.

Tight Regulation of Srs2 Helicase Activity Is Crucial for Proper Functioning of DNA Repair Mechanisms

Proper DNA damage repair is one of the most vital and fundamental functions of every cell. Several different repair mechanisms exist to deal with various types of DNA damage, in various stages of the cell cycle and under different conditions. Homologous recombination is one of the most important repair mechanisms in all organisms. Srs2, a regulator of homologous recombination, is a DNA helicase involved in DNA repair, cell cycle progression and genome integrity. Srs2 can remove Rad51 from ssDNA, and is thought to inhibit unscheduled recombination. However, Srs2 has to be precisely regulated, as failure to do so is toxic and can lead to cell death. We noticed that a very slight elevation of the levels of Srs2 (by addition of a single extra copy of the SRS2 gene) leads to hyper-sensitivity of yeast cells to methyl methanesulfonate (MMS, a DNA damaging agent). This effect is seen in haploid, but not in diploid, cells. We analyzed the mechanism that controls haploid/diploid sensitivity and arrived to the conclusion that the sensitivity requires the activity of RAD59 and RDH54, whose expression in diploid cells is repressed. We carried out a mutational analysis of Srs2 to determine the regions of the protein required for the sensitization to genotoxins. Interestingly, Srs2 needs the HR machinery and its helicase activity for its toxicity, but does not need to dismantle Rad51. Our work underscores the tight regulation that is required on the levels of Srs2 activity, and the fact that Srs2 helicase activity plays a more central role in DNA repair than the ability of Srs2 to dismantle Rad51 filaments.

TORC1 and TORC2 converge to regulate the SAGA co-activator in response to nutrient availability

Gene expression regulation is essential for cells to adapt to changes in their environment. Co-activator complexes have well-established roles in transcriptional regulation, but less is known about how they sense and respond to signaling cues. We have previously shown that, in fission yeast, one such co-activator, the SAGA complex, controls gene expression and the switch from proliferation to differentiation in response to nutrient availability. Here, using a combination of genetic, biochemical, and proteomic approaches, we show that SAGA responds to nutrients through the differential phosphorylation of its Taf12 component, downstream of both the TORC1 and TORC2 pathways. Taf12 phosphorylation increases early upon starvation and is controlled by the opposing activities of the PP2A phosphatase, which is activated by TORC1, and the TORC2-activated Gad8^AKT kinase. Mutational analyses suggest that Taf12 phosphorylation prevents cells from committing to differentiation until starvation reaches a critical level. Overall, our work reveals that SAGA is a direct target of nutrient-sensing pathways and has uncovered a mechanism by which TORC1 and TORC2 converge to control gene expression and cell fate decisions.

Metabolic engineering of Schizosaccharomyces pombe via CRISPR-Cas9 genome editing for lactic acid production from glucose and cellobiose

Modification of the Schizosaccharomyces pombe genome is often laborious, time consuming due to the lower efficiency of homologous recombination. Here, we constructed metabolically engineered S. pombe strains using a CRISPR-Cas9 system and also demonstrated D-lactic acid (D-LA) production from glucose and cellobiose. Genes encoding two separate pyruvate decarboxylases (PDCs), an L-lactic acid dehydrogenase (L-LDH), and a minor alcohol dehydrogenase (SPBC337.11) were disrupted, thereby attenuating ethanol production. To increase the cellular supply of acetyl-CoA, an important metabolite for growth, we introduced genes encoding bacterial acetylating acetaldehyde dehydrogenase enzymes (Escherichia coli MhpF and EutE). D-LA production by the resulting strain was achieved by expressing a Lactobacillus plantarum gene encoding D-lactate dehydrogenase. The engineered strain efficiently consumed glucose and produced D-LA at 25.2 g/L from 35.5 g/L of consumed glucose with a yield of 0.71 g D-LA / g glucose. We further modified this strain by expressing beta-glucosidase by cell surface display; the resulting strain produced D-LA at 24.4 g/L from 30 g/L of cellobiose in minimal medium, with a yield of 0.68 g D-LA / g glucose. To our knowledge, this study represents the first report of a S. pombe strain that was metabolically engineered using a CRISPR-Cas9 system, and demonstrates the possibility of engineering S. pombe for the production of value-added chemicals.

•

Schizosaccharomyces pombe were metabolically engineered using a CRISPR-Cas9 system.

•

D-lactic acid (D-LA) producing Schizosaccharomyces pombe strains were constructed.

•

25.2 g/L of D-LA was produced with a yield of 0.71 g-D-LA / g-glucose.

•

Beta-glucosidase was expressed on this engineered S. pombe strain.

•

D-LA was produced at 24.4 g/L from 30 g/L of cellobiose directly.

A CRISPR/Cas9-based method and primer design tool for seamless genome editing in fission yeast

In the fission yeast Schizosaccharomyces pombe the prevailing approach for gene manipulations is based on homologous recombination of a PCR product that contains genomic target sequences and a selectable marker. The CRISPR/Cas9 system has recently been implemented in fission yeast, which allows for seamless genome editing without integration of a selection marker or leaving any other genomic ‘scars’. The published method involves manual design of the single guide RNA (sgRNA), and digestion of a large plasmid with a problematic restriction enzyme to clone the sgRNA. To increase the efficiency of this approach, we have established and optimized a PCR-based system to clone the sgRNA without restriction enzymes into a plasmid with a dominant natMX6 (nourseothricin) selection marker. We also provide a web-tool, CRISPR4P, to support the design of the sgRNAs and the primers required for the entire process of seamless DNA deletion. Moreover, we report the preparation of G1-synchronized and cryopreserved S. pombe cells, which greatly increases the efficiency and speed for transformations, and may also facilitate standard gene manipulations. Applying this optimized CRISPR/Cas9-based approach, we have successfully deleted over 80 different non-coding RNA genes, which are generally lowly expressed, and have inserted 7 point mutations in 4 different genomic regions.

A CRISPR/Cas9-based method and primer design tool for seamless genome editing in fission yeast

In the fission yeast Schizosaccharomyces pombe the prevailing approach for gene manipulations is based on homologous recombination of a PCR product that contains genomic target sequences and a selectable marker. The CRISPR/Cas9 system has recently been implemented in fission yeast, which allows for seamless genome editing without integration of a selection marker or leaving any other genomic 'scars'. The published method involves manual design of the single guide RNA (sgRNA), and digestion of a large plasmid with a problematic restriction enzyme to clone the sgRNA. To increase the efficiency of this approach, we have established and optimized a PCR-based system to clone the sgRNA without restriction enzymes into a plasmid with a dominant natMX6 (nourseothricin) selection marker. We also provide a web-tool, CRISPR4P, to support the design of the sgRNAs and the primers required for the entire process of seamless DNA deletion. Moreover, we report the preparation of G1-synchronized and cryopreserved S. pombe cells, which greatly increases the efficiency and speed for transformations, and may also facilitate standard gene manipulations. Applying this optimized CRISPR/Cas9-based approach, we have successfully deleted over 80 different non-coding RNA genes, which are generally lowly expressed, and have inserted 7 point mutations in 4 different genomic regions.

A CRISPR/Cas9-based method and primer design tool for seamless genome editing in fission yeast

In the fission yeast Schizosaccharomyces pombe the prevailing approach for gene manipulations is based on homologous recombination of a PCR product that contains genomic target sequences and a selectable marker. The CRISPR/Cas9 system has recently been implemented in fission yeast, which allows for seamless genome editing without integration of a selection marker or leaving any other genomic ‘scars’. The published method involves manual design of the single guide RNA (sgRNA), and digestion of a large plasmid with a problematic restriction enzyme to clone the sgRNA. To increase the efficiency of this approach, we have established and optimized a PCR-based system to clone the sgRNA without restriction enzymes into a plasmid with a dominant natMX6 (nourseothricin) selection marker. We also provide a web-tool, CRISPR4P, to support the design of the sgRNAs and the primers required for the entire process of seamless DNA deletion. Moreover, we report the preparation of G1-synchronized and cryopreserved S. pombe cells, which greatly increases the efficiency and speed for transformations, and may also facilitate standard gene manipulations. Applying this optimized CRISPR/Cas9-based approach, we have successfully deleted over 80 different non-coding RNA genes, which are generally lowly expressed, and have inserted 7 point mutations in 4 different genomic regions.

Big data mining powers fungal research: recent advances in fission yeast systems biology approaches

Biology research has entered into big data era. Systems biology approaches therefore become the powerful tools to obtain the whole landscape of how cell separate, grow, and resist the stresses. Fission yeast Schizosaccharomyces pombe is wonderful unicellular eukaryote model, especially studying its division and metabolism can facilitate to understanding the molecular mechanism of cancer and discovering anticancer agents. In this perspective, we discuss the recent advanced fission yeast systems biology tools, mainly focus on metabolomics profiling and metabolic modeling, protein-protein interactome and genetic interaction network, DNA sequencing and applications, and high-throughput phenotypic screening. We therefore hope this review can be useful for interested fungal researchers as well as bioformaticians.

The power of fission: yeast as a tool for understanding complex splicing

Pre-mRNA splicing is an essential component of eukaryotic gene expression. Many metazoans, including humans, regulate alternative splicing patterns to generate expansions of their proteome from a limited number of genes. Importantly, a considerable fraction of human disease causing mutations manifest themselves through altering the sequences that shape the splicing patterns of genes. Thus, understanding the mechanistic bases of this complex pathway will be an essential component of combating these diseases. Dating almost to the initial discovery of splicing, researchers have taken advantage of the genetic tractability of budding yeast to identify the components and decipher the mechanisms of splicing. However, budding yeast lacks the complex splicing machinery and alternative splicing patterns most relevant to humans. More recently, many researchers have turned their efforts to study the fission yeast, Schizosaccharomyces pombe, which has retained many features of complex splicing, including degenerate splice site sequences, the usage of exonic splicing enhancers, and SR proteins. Here, we review recent work using fission yeast genetics to examine pre-mRNA splicing, highlighting its promise for modeling the complex splicing seen in higher eukaryotes.

Post-translocational adaptation drives evolution through genetic selection and transcriptional shift in Saccharomyces cerevisiae

Adaptation by natural selection might improve the fitness of an organism and its probability to survive in unfavorable environmental conditions. Decoding the genetic basis of adaptive evolution is one of the great challenges to deal with. To this purpose, Saccharomyces cerevisiae has been largely investigated because of its short division time, excellent aneuploidy tolerance and the availability of the complete sequence of its genome with a thorough genome database. In the past, we developed a system, named bridge-induced translocation, to trigger specific, non-reciprocal translocations, exploiting the endogenous recombination system of budding yeast. This technique allows users to generate a heterogeneous population of cells with different aneuploidies and increased phenotypic variation. In this work, we demonstrate that ad hoc chromosomal translocations might induce adaptation, fostering selection of thermo-tolerant yeast strains with improved phenotypic fitness. This "yeast eugenomics" correlates with a shift to enhanced expression of genes involved in stress response, heat shock as well as carbohydrate metabolism. We propose that the bridge-induced translocation is a suitable approach to generate adapted, physiologically boosted strains for biotechnological applications.

Module-based construction of plasmids for chromosomal integration of the fission yeast Schizosaccharomyces pombe

Integration of an external gene into a fission yeast chromosome is useful to investigate the effect of the gene product. An easy way to knock-in a gene construct is use of an integration plasmid, which can be targeted and inserted to a chromosome through homologous recombination. Despite the advantage of integration, construction of integration plasmids is energy- and time-consuming, because there is no systematic library of integration plasmids with various promoters, fluorescent protein tags, terminators and selection markers; therefore, researchers are often forced to make appropriate ones through multiple rounds of cloning procedures. Here, we establish materials and methods to easily construct integration plasmids. We introduce a convenient cloning system based on Golden Gate DNA shuffling, which enables the connection of multiple DNA fragments at once: any kind of promoters and terminators, the gene of interest, in combination with any fluorescent protein tag genes and any selection markers. Each of those DNA fragments, called a ‘module’, can be tandemly ligated in the order we desire in a single reaction, which yields a circular plasmid in a one-step manner. The resulting plasmids can be integrated through standard methods for transformation. Thus, these materials and methods help easy construction of knock-in strains, and this will further increase the value of fission yeast as a model organism.

Targeting of SUMO substrates to a Cdc48-Ufd1-Npl4 segregase and STUbL pathway in fission yeast

In eukaryotes, the conjugation of proteins to the small ubiquitin-like modifier (SUMO) regulates numerous cellular functions. A proportion of SUMO conjugates are targeted for degradation by SUMO-targeted ubiquitin ligases (STUbLs) and it has been proposed that the ubiquitin-selective chaperone Cdc48/p97-Ufd1-Npl4 facilitates this process. However, the extent to which the two pathways overlap, and how substrates are selected, remains unknown. Here we address these questions in fission yeast through proteome-wide analyses of SUMO modification sites. We identify over a thousand sumoylated lysines in a total of 468 proteins and quantify changes occurring in the SUMO modification status when the STUbL or Ufd1 pathways are compromised by mutations. The data suggest the coordinated processing of several classes of SUMO conjugates, many dynamically associated with centromeres or telomeres. They provide new insights into subnuclear organization and chromosome biology, and, altogether, constitute an extensive resource for the molecular characterization of SUMO function and dynamics.

The Protein Level of Rev1, a TLS Polymerase in Fission Yeast, Is Strictly Regulated during the Cell Cycle and after DNA Damage

Translesion DNA synthesis provides an alternative DNA replication mechanism when template DNA is damaged. In fission yeast, Eso1 (polη), Kpa1/DinB (polκ), Rev1, and Polζ (a complex of Rev3 and Rev7) have been identified as translesion synthesis polymerases. The enzymatic characteristics and protein-protein interactions of these polymerases have been intensively characterized; however, how these proteins are regulated during the cell cycle remains unclear. Therefore, we examined the cell cycle oscillation of translesion polymerases. Interestingly, the protein levels of Rev1 peaked during G¹ phase and then decreased dramatically at the entry of S phase; this regulation was dependent on the proteasome. Temperature-sensitive proteasome mutants, such as mts2-U31 and mts3-U32, stabilized Rev1 protein when the temperature was shifted to the restrictive condition. In addition, deletion of pop1 or pop2, subunits of SCF ubiquitin ligase complexes, upregulated Rev1 protein levels. Besides these effects during the cell cycle, we also observed upregulation of Rev1 protein upon DNA damage. This upregulation was abolished when rad3, a checkpoint protein, was deleted or when the Rev1 promoter was replaced with a constitutive promoter. From these results, we hypothesize that translesion DNA synthesis is strictly controlled through Rev1 protein levels in order to avoid unwanted mutagenesis.

Implementation of the CRISPR-Cas9 system in fission yeast

Application of the CRISPR-Cas9 genome editing system in the model organism Schizosaccharomyces pombe has been hampered by the lack of constructs to express RNA of arbitrary sequence. Here we present expression constructs that use the promoter/leader RNA of K RNA (rrk1) and a ribozyme to produce the targeting guide RNA. Together with constitutive expression of Cas9, this system achieves selection-free specific mutagenesis with efficiencies approaching 100%. The rrk1 CRISPR-Cas9 method enables rapid and efficient genome manipulation and unlocks the CRISPR toolset for use in fission yeast.