Reconstruction survival of segmental megaendoprostheses: a retrospective analysis of 28 patients treated for intercalary bone defects after musculoskeletal tumor resections

Joint preservation in revision arthroplasty and intercalary tumour implants using custom stem solutions

BACKGROUND

Off-the-shelf stems offer a wide variety of fixation methods for revision arthroplasty and intercalary tumour implants. However, in extensive defects or needed resection with minimal bone stock left, solid fixation is often not feasible with these implants. Custom-made stem solutions (CSS) offer a viable alternative in these cases to achieve joint preservation.

METHODS

Between 2017 and 2024 14 patients (15 implants) were treated in a single-centre study. CSS were indicated if the remaining bone stock was deemed insufficient for normal stem fixation due to tumour resection or previous operations. Postoperative analysis was conducted to evaluate the functional outcome as well as revision rates.

RESULTS

Implantation was possible in all cases, during the follow-up of 30 (SD 18; 6-66) months revision was needed in five cases; with one aseptic loosening, one screw loosening and three PJI cases. Mean MSTS score was 24 (SD 5; 17-30).

CONCLUSION

Custom-made stem solutions show promising results in extreme cases. Especially as a preservation of the joint is possible, this treatment algorithm should be considered on a case-by-case basis.

Treatment of a Radiation-Associated Femur Fracture with an Intercalary Endoprosthesis: A Case Report

CASE

A 72-year-old woman with undifferentiated pleomorphic sarcoma of the thigh received neoadjuvant chemotherapy and radiotherapy. She underwent wide resection and was scheduled for prophylactic fixation of the femur. However, prophylactic fixation was deferred secondary to COVID-19 pandemic. Unfortunately, when stepping out of an elevator, she sustained femur fracture. The fracture was treated with a cemented intercalary endoprosthesis. Three-year follow-up reveals stable fixation without any failure.

CONCLUSION

Postradiation fractures are challenging. Delayed union, nonunion, and infection are associated with internal fixation. To the best of our knowledge, this is the first report of intercalary endoprosthesis used for primary management of radiation-associated femur fracture.

Short-to-Mid-Term Outcomes of Ipsilateral Femoral Head Autograft Combined with Uncemented Total Hip Replacement for Partial Periacetabular Defects Following Tumor Resection

OBJECTIVE

Periacetabular tumors, especially in young to middle-aged patients with invasive benign tumors or low-grade malignant tumors involving type II or II + III, present significant challenges due to their rarity and the complexity of the anatomical and biomechanical structures involved. The primary difficulty lies in balancing the need to avoid unfavorable oncological outcomes while maintaining postoperative hip joint function during surgical resection. This study aimed to evaluate the effectiveness and reliability of a surgical method involving partial weight-bearing acetabular preservation combined with the use of an uncontaminated femoral head autograft to reconstruct the segmental bone defect after intra-articular resection of the tumorous joint, providing a solution that ensures both oncological safety and functional preservation of the hip joint in these patients.

METHODS

We conducted a retrospective study with a follow-up period of at least 36 months. From January 2010 to October 2020, we reviewed 20 cases of patients under 60 year of age with periacetabular invasive benign tumors or primary low-grade malignant tumors. All patients underwent reconstruction of the tumorous joint using autologous femoral head grafts. Data collected included patient age, gender, tumor type, preoperative and postoperative visual analog scale (VAS) scores, Musculoskeletal Tumor Society (MSTS) scores, Harris Hip Scores (HHS), patient survival rates, postoperative tumor recurrence, and surgical complications. To analyze the data, we utilized various statistical methods, including descriptive statistics to summarize patient demographics and clinical characteristics, and paired sample t-tests to compare preoperative and postoperative scores.

RESULTS

The study included 20 patients, and a total median follow-up was 83 months. Their pathologic diagnoses comprised 13 giant cell tumors (GCTs), 5 chondrosarcomas, one chondroblastoma, and 1 leiomyosarcoma. Postoperatively, the median differences in vertical and horizontal center of rotation (COR) were 3.8 and 4.0 mm. Median limb length discrepancy (LLD) postoperatively was 5.7 mm (range, 2.3-17.8 mm). Two patients (10%) experienced delayed wound healing, resolved with antibiotics and early surgical debridement. One patient experienced dislocation 3 months postoperatively, which was promptly addressed under general anesthesia without further dislocation.

CONCLUSION

Through multiplanar osteotomy with limited margins, femoral head autograft, and uncemented total hip replacement for pelvic segmental bone defects in selected patients in type II or II + III appears to be an encouraging limb-sparing surgery worthy of consideration for carefully selected patients.

Uncemented Customized Hollow Stems in Tumor Endoprosthetic Replacement-A Good Opportunity to Protect the Adjacent Joint in Children?

This study aimed to retrospectively analyze the follow-up results of cases in which the adjacent joint was preserved using a custom-made uncemented short-stem design (hollow stem) with optional external flanches in tumor endoprosthetic replacement due to bone sarcomas in 13 patients (with an average age of 9.6 years) between 2017 and 2023. Reconstructions were proximal femur (n = 6), intercalary femur (n = 4), intercalary tibia (n = 2), and proximal humerus (n = 1) tumor prostheses. The hollow body was used distally in 10 of the megaprotheses, proximally in 1, and both proximally and distally in 2 of them. The average distance from the joints was 6 cm in stems with flanches and 11.8 cm in stems without flanches. No aseptic loosening or deep infection was observed during an average follow-up of 34 months. Except for one case with a tibial intercalary prosthesis that needed a revision, all cases were well osteointegrated and all lower extremity cases could bear full weight without pain. In cases where the remaining bone stock after bone resection is insufficient for a standard stem implantation, reconstruction with a patient-specific short hollow-stem design appears to be a good alternative to protect healthy joints with high prosthesis survival and low revision rates in the short-term follow-up.

Graft Infections in Biologic Reconstructions in the Oncologic Setting: A Systematic Review of the Literature

Background: Biologic graft infection (BGI) is one of the main complications in graft reconstructions. However, very little evidence exists regarding the epidemiology of BGI, as most of the data come from sparse reports. Moreover, most of the series did not detail the treatment and outcome of graft infections. The aim of this systematic review of the literature is to provide a comprehensive data collection on BGI after oncologic resections. Methods: Three different databases (PubMed, Scopus, and Web of Science) were searched for relevant articles, and further references were obtained by cross-referencing. Results: 139 studies met the inclusion criteria. A total of 9824 grafts were retrieved. Among these, 684 (6.9%) were in the humerus, 365 (3.7%) in the pelvis, 2041 (20.7%) in the femur and 1660 (16.8%) in the tibia. Most grafts were osteoarticular (2481, 26.7%) and intercalary 2112 (22.7%) allografts. In 461 (5.0%), vascularized fibula grafts (VFGs) were used in combination with recycled autografts. Recycled grafts were reported in 1573 (16.9%) of the cases, and allograft-prosthetic composites in 1673 (18.0%). The pelvis and the tibia had the highest incidence of BGI (20.4% and 11.0%, respectively). The most reported first treatment was debridement and implant retention (DAIR) in 187 (42.8%) cases and two-stage revision with graft removal in 152 (34.8%). Very little data are reported on the final outcome specified by site or type of graft. Conclusions: This systematic review of the literature confirms a high incidence of infections in biologic reconstructions after resections of primary bone tumors. Despite DAIR being a viable attempt, in most cases, a two-stage approach with graft removal and reconstruction with endoprosthesis presented the highest chance to overcome infection, guaranteeing a reconstruction. We emphasize the need for future multicentric studies to focus on the management of infections after biological reconstructions in bone sarcomas.

3D-printed titanium porous prosthesis combined with the Masquelet technique for the management of large femoral bone defect caused by osteomyelitis

BACKGROUND

The treatment of infected bone defects remains a clinical challenge. With the development of three-dimensional printing technology, three-dimensional printed implants have been used for defect reconstruction. The aim of this study was to investigate the clinical outcomes of three-dimensional printed porous prosthesis in the treatment of femoral defects caused by osteomyelitis.

METHODS

Eleven patients with femoral bone defects following osteomyelitis who were treated with 3D-printed porous prosthesis at our institution between May 2017 and July 2021, were included. Eight patients were diagnosed with critical-sized defects, and the other three patients were diagnosed with shape-structural defects. A two-stage procedure was performed for all patients, and the infection was eradicated and bone defects were occupied by polymethylmethacrylate spacer during the first stage. The 3D-printed prosthesis was designed and used for the reconstruction of femoral defects in the second stage. Position of the reconstructed prostheses and bone growth were measured using radiography. The union rate, complications, and functional outcomes at the final follow-up were assessed.

RESULTS

The mean length of the bone defect was 14.0 cm, union was achieved in 10 (91%) patients. All patients showed good functional performance at the most recent follow-up. In the critical-sized defect group, one patient developed a deep infection that required additional procedures. Two patients had prosthetic dislocations. Radiography demonstrated good osseous integration of the implant-bone interface in 10 patients.

CONCLUSION

The 3D printed prostheses enable rapid anatomical and mechanically stable reconstruction of extreme femur bone defects, effectively shortens treatment time, and achieves satisfactory clinical outcomes.

Distal femoral megaprosthesis fracture treated by RescueSleeve MEGASYSTEM-C

Escalating revision surgery after megaprosthesis knee replacement sometimes raises the question of "limb salvage". Here we present a salvage technique for megaprosthesis fracture at the junction between the stem and the metaphyseal component. In this young active patient, the short residual proximal femur was not loose and was difficult to extract without prosthetic escalation. The technique described here conserved the well-fixed primary stem and used a custom-made RescueSleeve MEGASYSTEM-C connection sleeve (Link, Hamburg, Germany) plus spacer and a standard epiphyseal implant. This semi-conservative procedure avoided femorotomy or larger morbid segmental femoral resection. It conserved maximal bone stock and achieved rapid functional recovery. To our knowledge, this is the first reported case of this technique using a custom-made connecting part to manage megaprosthesis fracture. LEVEL OF EVIDENCE: IV.

Intercalary Resection of the Tibia for Primary Bone Tumors: Are Vascularized Fibula Autografts With or Without Allografts a Durable Reconstruction?

BACKGROUND

Reconstruction with vascularized fibula grafts (VFG) after intercalary resection of sarcoma may offer longevity by providing early graft-host union and fracture healing. The ability of the fibula to hypertrophy under mechanical stress, as well as vascularized bone in the area, may also be advantageous, given that soft tissues may be compromised because of resection, chemotherapy, or radiation therapy. VFG with a massive allograft combines the primary mechanical stability of the graft with the biological potential of the vascularized fibula; however, complications and the durability of this combined reconstruction are not well described.

QUESTIONS/PURPOSES

(1) What was the proportion of complications after reconstruction with VFG, with or without allografts? (2) What was the functional result after surgical treatment as assessed by the Musculoskeletal Tumor Society (MSTS) score? (3) What was the survivorship of these grafts free from revision and graft removal?

METHODS

Between 1988 and 2021, 219 patients were treated at our institution for a primary malignant or aggressive benign bone tumor of the tibia with en bloc resection. Of those, 54% (119 of 219) had proximal tibial tumors with epiphyseal involvement and were treated with either intra-articular resection and reconstruction with an osteoarticular allograft, allograft-prosthesis composite (APC), or modular prosthesis according to age, diagnosis, and preoperative or postoperative radiotherapy. Nine percent (20) of patients had distal tibial tumors that were treated with intra-articular resection and reconstruction with ankle arthrodesis using allogenic or autologous grafts, and 0.5% (1 patient) underwent total tibial resection for extensive tumoral involvement of the tibia and reconstruction with an APC. Thirty-six percent (79) of patients had a metadiaphyseal bone tumor of the tibia and were treated with intercalary joint-sparing resection. We routinely use reconstruction with VFG after intercalary tibial resection for primary malignant or aggressive benign bone tumors in patients with long life expectancy and high functional demands and in whom at least 1 cm of residual bone stock of the proximal or distal epiphysis can be preserved. By contrast, we routinely use intercalary massive allograft reconstruction in short resections or in patients with metastatic disease who do not have long life expectancy. We avoid VFG in patients with tibial bone metastasis, patients older than 70 years, or primary bone tumors in patients who may undergo postoperative radiotherapy; in these patients, we use alternative reconstructive methods such as intercalary prostheses, plate and cement, or intramedullary nailing with cement augmentation. According to the above-mentioned indications, 6% (5 of 79) of patients underwent massive allograft reconstruction because they were young and had intercalary resections shorter than 7 cm or had metastatic disease at diagnosis without long life expectancy, whereas 94% (74) of patients underwent VFG reconstruction. The median age at operation was 16 years (range 5 to 68 years). The diagnosis was high-grade osteosarcoma in 22 patients, Ewing sarcoma in 19, adamantinoma in 16, low-grade osteosarcoma in five, fibrosarcoma in three, malignant fibrous histiocytoma and Grade 2 chondrosarcoma in two, and malignant myoepitelioma, angiosarcoma of bone, malignant peripheral nerve sheath tumor of bone, squamous cell carcinoma secondary to chronic osteomyelitis, and desmoplastic fibroma in one patient each. Median follow-up was 12.3 years (range 2 to 35 years). The median tibial resection length was 15 cm (range 7 to 27 cm), and the median fibular resection length was 18 cm (range 10 to 29 cm). VFG was used with a massive allograft in 55 patients, alone in 12 patients, and combined with allogenic cortical bone struts in seven patients. We used VFG combined with a massive allograft in patients undergoing juxta-articular, joint-sparing resections that left less than 3 cm of residual epiphyseal bone, for intra-epiphyseal resections, or for long intercalary resections wherein the allograft can provide better mechanical stability. In these clinical situations, the combination of a VFG and massive allograft allows more stable fixation and better tendinous reattachment of the patellar tendon. VFG was used with cortical bone struts in distal tibia intercalary resections where the narrow diameter of the allograft did not allow concentric assembling with the fibula. Finally, VFG alone was often used after mid- or distal tibia intercalary resection in patients with critical soft tissue conditions because of previous surgery, in whom the combination with massive allograft would result in a bulkier reconstruction. We ascertained complications and MSTS scores by chart review, and survivorship free from revision and graft removal was calculated using the Kaplan-Meier estimator. In our study, however, the occurrence of death as a competing event was observed in a relatively low proportion of patients, and only occurred after the primary event of interest had already occurred. Considering the nature of our data, we did not consider death after the primary event of interest as a competing event.

RESULTS

In all, 49% (36 of 74) of patients experienced complications and underwent operative treatment. There were 45 complications in 36 patients. There was one instance of footdrop secondary to common peroneal nerve palsy, four wound problems, one acute vein thrombosis of the VFG pedicle and one necrosis of the skin island, two episodes of implant-related pain, 10 nonunions, six fractures, six deep infections, nine local recurrences, one Achilles tendon retraction, one varus deformity of the proximal tibia with postoperative tibial apophysis detachment, one knee osteoarthritis, and one hypometria. The median MSTS score was 30 (range 23 to 30); the MSTS score was assessed only in patients in whom the VFG was retained at the final clinical visit, although if we had considered those who had an amputation, the overall score would be lower. Revision-free survival of the reconstructions was 58% (95% confidence interval 47% to 70%) at 5 years, 52% (95% CI 41% to 65%) at 10 and 15 years, and 49% (95% CI 38% to 63%) at 20 and 30 years. Eight patients underwent VFG removal because of complications, with an overall reconstruction survival of 91% (95% CI 84% to 98%) at 5 years and 89% (95% CI 82% to 97%) at 10 to 30 years.

CONCLUSION

VFG, alone or combined with an allograft, could be considered in reconstructing a lower extremity after intercalary resections of the tibia for primary bone tumors, and it avoids the use of a large endoprosthesis. However, this procedure was associated with frequent, often severe complications during the first postoperative years and complication-free survival of 58% at 5 years. Nearly 10% of patients ultimately had an amputation. For patients whose reconstruction succeeded, the technique provides a durable reconstruction with good MSTS scores, and we believe it is useful for active patients with long life expectancy. Fractures, frequently observed in the first 5 years postoperatively, might be reduced using long-spanning plate fixation, and that appeared to be the case in our study. Nonbridging fixation can be an option in intraepiphyseal resection when a spanning plate cannot be used or in pediatric patients to enhance fibula hypertrophy and remodeling. We did not directly compare VFG with or without allografts to other reconstruction options, so the decision to use this approach should be made thoughtfully and only after considering the potential serious risks.

LEVEL OF EVIDENCE

Level IV, therapeutic study.

Proximal Tibia Tumour Location and Curettage Are Major Risk Factors of Local Recurrence in Giant Cell Tumour of Bone

Giant cell tumour of bone (GCTB) is one of the most common local aggressive tumourous lesions with a wide variety of biological behaviour. However, there are no clear indicative criteria when choosing the type of procedure and the complication rates remain high, especially in terms of local recurrence. The purpose of the study was to (1) identify the main risk factors for local recurrence, (2) evaluate the recurrence-free survival in dependence on neoadjuvant denosumab use and the type of procedure, and (3) compare the functional outcomes after curettage and en bloc resection. The group included 102 patients with GCTB treated between 2006 and 2020. The mean age of patients was 34.4 years (15-79). The follow-up period was 8.32 years (2-16) on average. Local recurrence occurred in 14 patients (29.8%) who underwent curettage and in 5 patients (10.6%) after en bloc resection. Curettage was shown to be a factor in increasing recurrence rates (OR = 3.64 [95% CI: 1.19-11.15]; p = 0.023). Tibial location was an independent risk factor for local recurrence regardless of the type of surgery (OR = 3.22 [95% CI: 1.09-9.48]; p = 0.026). The recurrence-free survival rate of patients treated with resection and denosumab was higher compared to other treatments at five years postoperatively (p = 0.0307). Functional ability and pain as reported by patients at the latest follow-up were superior after curettage compared to resection for upper and lower extremity (mean difference: -4.00 [95% CI: -6.81 to -1.18]; p < 0.001 and mean difference: -5.36 [95% CI: -3.74 to -6.97]; p < 0.001, respectively). Proximal tibia tumour location and curettage were shown to be major risk factors for local recurrence in GCTB regardless of neoadjuvant denosumab treatment. The recurrence-free survival rate of patients treated with resection and denosumab was higher compared to other treatments. The functional outcome of patients after curettage was better compared to en bloc resection.

Reconstruction of massive bone defects after femoral tumor resection using two new-designed 3D-printed intercalary prostheses: a clinical analytic study with the cooperative utilization of multiple technologies

BACKGROUND

To reconstruct massive bone defects of the femoral diaphysis and proximal end with limited bilateral cortical bone after joint-preserving musculoskeletal tumor resections, two novel 3D-printed customized intercalary femoral prostheses were applied.

METHODS

A series of nine patients with malignancies who received these novel 3D-printed prostheses were retrospectively studied between July 2018 and November 2021. The proximal and diaphyseal femur was divided into three regions of interest (ROIs) according to anatomic landmarks, and anatomic measurements were conducted on 50 computed tomography images showing normal femurs. Based on the individual implant-involved ROIs, osteotomy level, and anatomical and biomechanical features, two alternative 3D-printed prostheses were designed. In each patient, Hounsfield Unit (HU) value thresholding and finite element analysis were conducted to identify the bone trabecula and calcar femorale and to determine the stress distribution, respectively. We described the characteristics of each prosthesis and surgical procedure and recorded the intraoperative data. All patients underwent regular postoperative follow-up, in which the clinical, functional and radiographical outcomes were evaluated.

RESULTS

With the ROI division and radiographic measurements, insufficient bilateral cortical bones for anchoring the traditional stem were verified in the normal proximal femur. Therefore, two 3D-printed intercalary endoprostheses, a Type A prosthesis with a proximal curved stem and a Type B prosthesis with a proximal anchorage-slot and corresponding locking screws, were designed. Based on HU value thresholding and finite element analysis, the 3D-printed proximal stems in all prostheses maximally preserved the trabecular bone and calcar femorale and optimized the biomechanical distribution, as did the proximal screws. With the 3D-printed osteotomy guide plates and reaming guide plates, all patients underwent the operation uneventfully with a satisfactory duration (325.00 ± 62.60 min) and bleeding volume (922.22 ± 222.36 ml). In the follow-up, Harris Hip and Musculoskeletal Tumor Society scores were ameliorated after surgery (P < 0.001 and P < 0.001, respectively), reliable bone ingrowth was observed, and no major complications occurred.

CONCLUSIONS

Two novel 3D-printed femoral intercalary prostheses, which achieved acceptable overall postoperative outcomes, were used as appropriate alternatives for oncologic patients with massive bone defects and limited residual bone and increased the opportunities for joint-preserving tumor resection. Several scientific methodologies utilized in this study may promote the clinical design proposals of 3D-printed implants.

Novel axial compressive endoprosthesis ACE can enhance metaphyseal fixation and facilitate osseointegration: A biomechanical study

Background: Metaphyseal fixation for endoprosthetic reconstruction after bone tumor resection is difficult due to the short residual bone length and reverse funnel shape of the metaphysis. In the current study, 3D-printed axial compressive endoprosthesis (ACE) with a short stem and intramedullary axial compressive mechanism is proposed to improve metaphyseal fixation. The rationales of ACE are that 1) intramedullary axial compress enhances the stability of endoprosthesis and facilitates bone ingrowth at the osteotomy site; 2) 3D printed porous metallic surface at osteotomy surface and stem allows bone ingrowth to achieve osseointegration.

Methods: A biomechanical study was performed to explore the initial stability using Sawbones. A diaphysis and metaphyseal segmental defect were created and four fixation structures were simulated: 1) ACE; 2) ACE + lateral plate; 3) stem prosthesis + unilateral plate; 4) stem prosthesis + bilateral plates. Bending and torsional stiffness were determined with a material testing machine. The relationship between the torque of the compression nut and the axial compression force of the bone-implant surface was measured using a round gasket load sensor.

Results: ACE + lateral plate was the stiffest in the bending test (sagittal 324.3 ± 110.8 N/mm, coronal 307.7 ± 8.7 N/mm). ACE + lateral plate and stem prosthesis + bilateral plates had the highest torsional stiffness (10.9 ± 1.3 Nm/° and 10.7 ± 0.2 Nm/° respectively). The bending stiffness of ACE was equivalent to stem prosthesis + bilateral plates (sagittal 196 ± 10 N/mm vs. 200 ± 7 N/mm, coronal 197 ± 14 N/mm vs. 209 ± 3 N/mm), but the torsional stiffness of ACE was inferior to stem prosthesis + bilateral plates (6.1 ± 1.3 Nm/° vs. 10.7 ± 0.2 Nm/°). Stem prosthesis + unilateral plate was the least stiff both in bending and torsion. The relationship between torque (T/Nm) and axial pressure (F/N) was F = 233.5T.

Conclusion: The axial compressive design of ACE enhances primary stability and facilitates osseointegration, which provides an alternative option of metaphyseal fixation for endoprosthetic reconstruction.

Intramedullary nailing for impending or pathologic fracture of the long bone: titanium vs carbon fiber peek nailing

Purpose

Methods

Results

Conclusions

Outcomes of Intercalary Endoprostheses as a Treatment for Metastases in the Femoral and Humeral Diaphysis

BACKGROUND

The purpose of this study was to evaluate the implant survival, functional score and complications of intercalary endoprostheses implanted for metastatic involvement of the femoral and humeral diaphysis.

METHODS

The selected group covered patients with bone metastasis who were surgically treated with an intercalary endoprosthesis between 2012 and 2021. The functional outcome was evaluated with the Musculoskeletal Tumor Society (MSTS) scoring system, and complications were evaluated by using the failure classification for prosthetics designed by Henderson.

RESULTS

The mean follow-up was 29.8 months. In our group of 25 patients with 27 intercalary endoprostheses (18 femurs, 9 humeri), there were 7 implant-related complications (25.9%), which were more common on the humerus (4 cases, 44.4%) than on the femur (3 cases, 16.7%). Only type II failure-aseptic loosening (5 cases, 18.5%)-and type III failure-structural failure (2 cases, 7.4%)-occurred. There was a significantly higher risk of aseptic loosening of the endoprosthesis in the humerus compared with that in the femur (odds ratio 13.79, 95% confidence interval 1.22-151.05, p = 0.0297). The overall cumulative implant survival was 92% 1 year after surgery and 72% 5 years after surgery. The average MSTS score was 82%. The MSTS score was significantly lower (p = 0.008) in the humerus (75.9%) than in the femur (84.8%).

CONCLUSIONS

The resection of bone metastases and replacement with intercalary endoprosthesis has excellent immediate functional results with an acceptable level of complications in prognostically favourable patients.

[Research progress of cementless intercalary prosthesis stem]

OBJECTIVE

To review the research progress of cementless intercalary prosthesis stem.

METHODS

The literature about the cementless intercalary prosthesis in treatment of bone defects of extremities was reviewed, and the designing and application of prosthesis stem were analyzed.

RESULTS

Cementless intercalary prosthesis has the advantages of good biocompatibility. However, there are also some disadvantages, including the multiple factors affecting the fixation of the prosthesis stem and individual differences in the stability of the prosthesis. The methods to improve the fixation stability of prosthesis stem mainly include the optimization of prosthesis stem shape, addition of auxiliary fixation, and improvement of coating materials on the stem surface as well as porous structure of the stem surface. Among these methods, augment with auxiliary fixation has the most satisfactory effect on improving the stability of prosthesis. However, the deficiency of the method is the increasing risk of the larger incision exposure and surgical trauma.

CONCLUSION

Improving the design and fixation method of the cementless intercalary prosthesis stem can further improve the stability of the prosthesis. Under the premise of avoiding increasing surgical trauma as much as possible, addition of the auxiliary fixation can be a feasible choice to improve the fixation stability of prosthesis.

Is three-dimensional-printed custom-made ultra-short stem with a porous structure an acceptable reconstructive alternative in peri-knee metaphysis for the tumorous bone defect?

Background

Long-lasting reconstruction after extensive resection involving peri-knee metaphysis is a challenging problem in orthopedic oncology. Various reconstruction methods have been proposed, but they are characterized by a high complication rate. The purposes of this study were to (1) assess osseointegration at the bone implant interface and correlated incidence of aseptic loosening; (2) identify complications including infection, endoprosthesis fracture, periprosthetic fracture, leg length discrepancy, and wound healing problem in this case series; and (3) evaluate the short-term function of the patient who received this personalized reconstruction system.

Methods

Between September 2016 and June 2018, our center treated 15 patients with malignancies arising in the femur or tibia shaft using endoprosthesis with a 3D-printed custom-made stem. Osseointegration and aseptic loosening were assessed with digital tomosynthesis. Complications were recorded by reviewing the patients’ records. The function was evaluated with the 1993 version of the Musculoskeletal Tumor Society (MSTS-93) score at a median of 42 (range, 34 to 54) months after reconstruction.

Results

One patient who experienced early aseptic loosening was managed with immobilization and bisphosphonates infusion. All implants were well osseointegrated at the final follow-up examination. There are two periprosthetic fractures intraoperatively. The wire was applied to assist fixation, and the fracture healed at the latest follow-up. Two patients experienced significant leg length discrepancies. The median MSTS-93 score was 26 (range, 23 to 30).

Conclusions

A 3D-printed custom-made ultra-short stem with a porous structure provides acceptable early outcomes in patients who received peri-knee metaphyseal reconstruction. With detailed preoperative design and precise intraoperative techniques, the reasonable initial stability benefits osseointegration to osteoconductive porous titanium, and therefore ensures short- and possibly long-term durability. Personalized adaptive endoprosthesis, careful intraoperative operation, and strict follow-up management enable effective prevention and treatment of complications. The functional results in our series were acceptable thanks to reliable fixation in the bone-endoprosthesis interface and an individualized rehabilitation program. These positive results indicate this device series can be a feasible alternative for critical bone defect reconstruction. Nevertheless, longer follow-up is required to determine whether this technique is superior to other forms of fixation.

Highly Cancellous Titanium Alloy (TiAl6V4) Surfaces on Three-Dimensionally Printed, Custom-Made Intercalary Tibia Prostheses: Promising Short- to Intermediate-Term Results

Custom-made, three-dimensionally-printed (3D) bone prostheses gain increasing importance in the reconstruction of bone defects after musculoskeletal tumor resections. They may allow preservation of little remaining bone stock and ensure joint or limb salvage. However, we believe that by constructing anatomy-imitating implants with highly cancellous titanium alloy (TiAl₆V₄) surfaces using 3D printing technology, further benefits such as functional enhancement and reduction of complications may be achieved. We present a case series of four patients reconstructed using custom-made, 3D-printed intercalary monobloc tibia prostheses treated between 2016 and 2020. The mean patient age at operation was 30 years. Tumor resections were performed for Ewing sarcoma (n = 2), high-grade undifferentiated pleomorphic bone sarcoma (n = 1) and adamantinoma (n = 1). Mean resection length was 17.5 cm and mean operation time 147 min. All patients achieved full weight-bearing and limb salvage at a mean follow-up of 21.25 months. One patient developed a non-union at the proximal bone-implant interface. Alteration of implant design prevented non-union in later patients. Mean MSTS and TESS scores were 23.5 and 88. 3D-printed, custom-made intercalary tibia prostheses achieved joint and limb salvage in this case series despite high, published complication rates for biological and endoprosthetic reconstructions of the diaphyseal and distal tibia. Ingrowth of soft tissues into the highly cancellous implant surface structure reduces dead space, enhances function, and appears promising in reducing complication rates.