Risk factors associated with work-related musculoskeletal disorders among floor-sitting precision handicraft workers

The relationship between the level of postural stress, Musculoskeletal Disorders, and chronic fatigue: A case study in the dairy industry

BACKGROUND

Dairy industry workers face numerous ergonomic risk factors in their workplace, including improper posture, manual material handling, and musculoskeletal disorders (MSDs). Fewstudies have been conducted on the correlation of postural stress, MSDs, and chronic fatigue among workers in the dairy industry.

OBJECTIVE

This study aimed to investigate the relationship between the level of postural stress, MSDs, and chronic fatigue in a dairy company.

METHODS

In this cross-sectional study, 260 male workers were included in the research based on specific inclusion criteria. The Cornell Musculoskeletal Discomfort Questionnaire, Chalder Fatigue Scale, and a researcher-made demographic questionnaire were used to collect data. The posture of workers was evaluated using RULA and REBA software, and the evaluation of the manual lifting of loads was assessed using the WISHA lifting calculator. Finally, the collected data were entered into the SPSS software version 26.0 and analyzed.

RESULTS

The findings revealed a significant statistical relationship between the level of postural stress and chronic fatigue and a significant positive correlation between MSDs and chronic fatigue. Furthermore, a statistically significant relationship was observed between MSDs, chronic fatigue, and ergonomics training experience.

CONCLUSIONS

The results obtained in this study support the notion that high levels of postural stress and MSDs can produce an increase in chronic fatigue among workers, and lack of ergonomics training for workers can increase both MSDs and chronic fatigue. Therefore, it is necessary to carry out intervention measures in the field of ergonomics management in similar industries through the implementation of ergonomic intervention programs with a focus on proactive and preventive measures and the use of participatory ergonomic programs and educational demands assessment.

Interactions between work-related factors, perceived fatigue and musculoskeletal disorders among handicraft artisans: structural equation model analysis

The cross-sectional study aimed to investigate the relationship between work-related factors, perceived work fatigue (PWF) and musculoskeletal disorders (MSDs) among handicraft artisans. 364 artisans participated in a questionnaire survey, and a structural equation model (SEM) was developed to explore the direct and indirect relationships between these factors using partial least squares analysis. The SEM explained 98.2% of the variance in MSDs and revealed that exposure to biomechanical factors had a direct impact on PWF and MSDs, with PWF mediating the effect of biomechanical factors on MSDs. Additionally, job demand was found to be positively associated with MSDs, while job control and social support reduced the risk of MSDs. The findings underscore the importance of strategic initiatives to mitigate the risk of developing MSDs among artisans. The study also highlights the potential of SEM as a novel framework for understanding the complex pathogenesis of MSDs in occupational health research.Practitioner summary: The study sought to comprehensively examine the intricate relationships among work-related factors, PWF, and MSDs. To achieve this, an SEM approach was employed to capture both direct and indirect relationships between these factors, employing partial least squares analysis. Findings revealed SEM as an innovative framework for understanding the intricate development of MSDs.

Ergonomic design and evaluation of gemstone polishing workstation

Objectives. Gemstone polishers suffer from musculoskeletal problems due to constrained working postures, substantially influenced by the poor design of conventional gemstone polishing workstations. The present study investigated the effects of three workstation adjustment parameters (illumination at workstation, polishing height, tool post position) on postural angle, muscle activity and perceived postural discomfort in order to develop recommendations for new gemstone polishing workstations. Methods. Twelve professional gemstone polishers performed the polishing task on a prototype test-rig in 27 different test conditions. Taguchi's L27 orthogonal array was employed to estimate the optimum setting for gemstone polishing workstation design. Results. Study variables had a significant influence on postural angles. Polishing height substantially influenced muscle activity and perceived discomfort in the shoulder and lower back region. Tool post position was found to be the determinant factor for forearm muscle activity and perceived discomfort in the wrist/forearm region. Based on the findings, illumination of 1500 lux, polishing at 15 cm above the elbow height and a 20° tool position was recommended. Conclusions. Our findings present an alternative approach to using Taguchi's design of experiment for workstation improvement, which has received very little attention in ergonomics studies. A confirmation test was conducted to validate the study recommendations.

Evaluating the ergonomic deficiencies in computer workstations and investigating their correlation with reported musculoskeletal disorders and visual symptoms among computer users in Bangladeshi university

Nowadays, computer users are facing musculoskeletal disorders (MSDs) and visual symptoms. Prolonged sitting in inappropriate, awkward, and static postures on the computer workstation may cause musculoskeletal disorders (MSDs). Similarly, inappropriate placement of monitors, illumination, and other factors such as prolonged usage of computers are related to visual symptoms.

OBJECTIVE

This study aims to evaluate the ergonomic deficiencies of computer workstations and their correlation with MSDs and visual symptoms.

METHODS

This study involved 271 university employees from a Bangladeshi engineering university. Ergonomic deficiencies were evaluated through direct observations and Occupational Safety and Health Administration checklists. In addition, the Nordic Musculoskeletal Questionnaire was used to assess the prevalence of MSDs and visual discomforts. Binary Logistic Regression (BLR) analysis was also used to examine the correlation between musculoskeletal symptoms and ergonomic deficiencies.

RESULTS

Results showed serious deficiencies in workstation setup, seating arrangement, monitor orientations, keyboard orientations, other input device orientations, and accessory setup. Employees reported that the MSDs in different body regions during the last 12 months including lower back (62 %), upper back (53 %), shoulders (47 %), and neck (25 %). Moreover, itchy eyes (69 %), tired eyes (83 %), and unclear vision (56.83 %) were the most common visual discomforts or visual symptoms among the participants. Results also revealed that monitor ergonomics and its orientation deficits were significantly associated with visual discomforts. Gender, job type, age, BMI, work experience, duration of computer work, and beak taking after 2 h were the independent variables reliably predicting the MSDs and visual symptoms.

CONCLUSION

It is evident that MSDs and visual symptoms were associated with computer workstation deficiencies and other work-related factors.

Association of ergonomics risk factors among Iranian calico crafts-men and musculoskeletal discomforts: a cross-sectional study

BACKGROUND

Work-related musculoskeletal disorders (WMSDs) have always been complaints reported by handicraft workers due to the repetitive and static nature of work. Therefore, the current study aimed to investigate the ergonomic conditions of craftsmen engaged with the calico industry.

METHOD

This cross-sectional study was done in small calico industrial workshops in Isfahan, Iran, in 2022. The sample selection method in this study was census. Using QEC (Quick Exposure Checklist) and Cornell-Musculoskeletal Discomfort Questionnaire (CMDQ), the ergonomic status of workers was evaluated. The data were analyzed using Chi-square (χ2) and Pearson's product-moment correlation test.

RESULTS

The risk level of working postures in wrist/hand, shoulder /arm, and neck were high or very high among the craftsmen. The relationships between discomfort complaints reported by the participants and the risk level of working postures were significant for neck χ² (1, N = 100) = 13.603, P_value = 0.034, left knee χ² (1, N = 100) = 12.310, P_value = 0.030 and lower left leg χ² (1, N = 100) = 11.906, P_value = 0.042. The posture risk level scores for %57.7 of the participants who self-reported the right shoulder discomfort were found to be high or very high.

CONCLUSIONS

The high risk found in most calico craftsmen may induce more serious musculoskeletal problems that require applicable interventions. The most important risk factors realized among calico craftsmen were prolonged sitting postures and repetitive tasks.

Prevalence of Musculoskeletal Disorders and Their Associated Risk Factors among Furniture Manufacturing Workers in Guangdong, China: A Cross-Sectional Study

OBJECTIVE

This study aims to investigate the one-year prevalence and the associated factors of work-related musculoskeletal disorders (WMSDs) among furniture manufacturing workers in Guangdong, China.

METHODS

A cross-sectional study of 4181 (2953 males and 1228 females) furniture manufacturing workers was conducted between September 2019 and December 2019. All information about WMSDs was collected by the electronic version of Chinese Musculoskeletal Questionnaires (CMQ). Descriptive statistics and a binary logistic regression model were used to interpret the data.

RESULT

The overall prevalence of WMSDs was 31.57%. The WMSD symptoms most commonly occurred in the neck (16.77%), followed by the shoulders (14.90%), ankles/feet (14.64%), hands/wrists (13.30%), upper back (11.48%), and lower back (10.95%). Multiple logistic regression analysis revealed that several individual, labor organization, and ergonomics-related factors conferred significant risks to WMSDs at different body sites.

CONCLUSIONS

WMSDs remain the major occupational health problem for furniture manufacturing workers. Hence, some effective and feasible protective measures for furniture manufacturing workers are required in order to alleviate the health burden caused by WMSDs.

Musculoskeletal symptoms and associated factors among manual porcelain workers at different workstations: a cross-sectional study

OBJECTIVES

To investigate the prevalence of work-related musculoskeletal disorders (WMSDs) symptoms and to identify the associated factors (individual, and work-related) among manual porcelain workers at different workstations. The risk level of each workstation was also assessed based on the working postures for the purpose of improving occupational health.

METHODS

In total, 349 workers were recruited for this cross-sectional study. The Nordic Musculoskeletal Questionnaire (NMQ) was used to collect data on WMSDs symptoms in nine body regions. The relationship between individual/occupational factors and WMSDs symptoms was determined using multiple logistic regression analysis. The Rapid Entire Body Assessment (REBA) method was applied to classify the risk level of working postures at the five workstations (shaping, trimming, glazing, painting, and burning).

RESULTS

The prevalence of musculoskeletal discomfort in at least one body region within the past 12 months was 69.1% among the participants: the neck (49.3%), lower back (43.8%), and shoulders (27.5%). Sex, work experience, daily working hours, perceived work fatigue, and workstation, were significantly associated with WMSDs symptoms in different body regions. The REBA indicated that 57.8% and 32.5% of the working postures were in the medium- and above high-risk levels, respectively.

CONCLUSION

The findings of this study showed a high occurrence of WMSDs symptoms among manual porcelain workers and suggested that both individual and work-related characteristics should be considered to improve occupational health. Furthermore, urgent ergonomic intervention is needed to avoid awkward working postures that cause WMSDs symptoms in porcelain workers, particularly at the shaping and burning workstations.