Biological monitoring of workers exposed to N,N-dimethylformamide in the synthetic fibre industry

Human Biomonitoring Initiative (HBM4EU): Human Biomonitoring Guidance Values Derived for Dimethylformamide

Within the European Joint Program on Human Biomonitoring HBM4EU, human biomonitoring guidance values (HBM-GVs) for the general population (HBM-GV_GenPop) or for occupationally exposed adults (HBM-GV_Worker) are derived for prioritized substances including dimethylformamide (DMF). The methodology to derive these values that was agreed upon within the HBM4EU project was applied. A large database on DMF exposure from studies conducted at workplaces provided dose–response relationships between biomarker concentrations and health effects. The hepatotoxicity of DMF has been identified as having the most sensitive effect, with increased liver enzyme concentrations serving as biomarkers of the effect. Out of the available biomarkers of DMF exposure studied in this paper, the following were selected to derive HBM-GV_Worker: total N-methylformamide (tNMF) (sum of N-hydroxymethyl-N-methylformamide and NMF) and N-acetyl-S-(N-methylcarbamoyl)cysteine (AMCC) in urine. The proposed HBM-GV_Worker is 10 mg·L⁻¹ or 10 mg·g⁻¹ creatinine for both biomarkers. Due to their different half-lives, tNMF (representative of the exposure of the day) and AMCC (representative of the preceding days’ exposure) are complementary for the biological monitoring of workers exposed to DMF. The levels of confidence for these HBM-GV_Worker are set to “high” for tNMF and “medium-low” for AMCC. Therefore, further investigations are required for the consolidation of the health-based HBM-GV for AMCC in urine.

Hsa_circ_0005915 promotes N,N-dimethylformamide-induced oxidative stress in HL-7702 cells through NRF2/ARE axis

N,N-dimethylformamide (DMF) is an organic compound widely used in industrial production processes as a solvent with a low evaporation rate. Excessive exposure to DMF may lead to liver damage. Oxidative stress has been reported as one of the main causes of DMF-induced hepatotoxicity. Several doses of DMF (0, 1, 5, and 10 mM) were used to treat HL-7702 cells for a relatively long period to simulate the actual exposure pattern in occupational settings, and oxidative stress was induced. Previous studies illustrated that circular RNA (circRNA) plays a vital role in sustaining hepatocyte physiological function. To explore whether aberrant circRNA expression is involved in DMF-induced excessive ROS generation and hepatotoxicity, high-throughput transcriptional sequencing was performed to identify the altered circRNA expression profiles in HL-7702 liver cells after treatment with 0, 75, or 150 mM DMF for 48 h. We found that levels of induced oxidative stress were similar to those in the long-term exposure model. Among the altered circRNAs, one circRNA (hsa_circ_0005915) was significantly upregulated after DMF exposure, and it affected DMF-mediated oxidative stress in HL-7702 cells. Further experiments revealed that hsa_circ_0005915 downregulated the expression of nuclear factor erythoid-2-related factor 2 (NRF2) at the post-transcriptional level via promoting the ubiquitination and degradation of NRF2, which led to the increase of ROS accumulation. Further investigation demonstrated that the expression levels of NRF2-regulated antioxidative genes-heme oxygenase 1 (HO1) and NAD(P)H quinone dehydrogenase 1 (NQO1)-indeed declined after the overexpression of hsa_circ_0005915. In vivo study also indicated that DMF exposure can upregulate the expression of mmu_circ_0007941 (homologous circRNA of hsa_circ_0005915) and downregulated Nrf2 and Ho1 proteins. In summary, our results revealed that hsa_circ_0005915 plays an important role in promoting DMF-induced oxidative stress by inhibiting the transcriptional activity of the NRF2/ARE axis, which provides a potential molecular mechanism of DMF-mediated hepatotoxicity.

Characterization of US population levels of urinary methylcarbamoyl mercapturic acid, a metabolite of N,N-dimethylformamide and methyl isocyanate, in the National Health and Nutrition Examination Survey (NHANES) 2005-2006 and 2011-2016

Methylcarbamoyl mercapturic acid (MCAMA, N-acetyl-S-(N-methylcarbamoyl)-L-cysteine) is a urinary metabolite of N,N-dimethylformamide and methyl isocyanate, which are volatile organic compounds that are harmful to humans. N,N-dimethylformamide exposure causes liver damage, and methyl isocyanate inhalation damages the lining of the respiratory tract, which can increase risk of chronic obstructive pulmonary disease and asthma. This study characterizes urinary MCAMA levels in the US population and explores associations of MCAMA concentrations with select demographic and environmental factors. We used liquid chromatography tandem mass spectrometry to measure MCAMA in urine collected from study participants ≥ 12 years old (N = 8272) as part of the National Health and Nutrition Examination Survey 2005-2006 and 2011-2016. We produced multiple regression models with MCAMA concentrations as the dependent variable and sex, age, fasting time, race/ethnicity, diet, and cigarette smoking as independent variables. Cigarette smokers and nonsmokers had median urinary MCAMA concentrations of 517 μg/g creatinine and 127 μg/g creatinine, respectively. Sample-weighted multiple regression analysis showed that MCAMA was positively associated with serum cotinine (p < 0.0001). Compared to non-exposed participants (serum cotinine ≤ 0.015 ng/mL), presumptive exposure to second-hand tobacco smoke (serum cotinine > 0.015-≤ 10 ng/mL and 0 cigarettes smoked per day) was associated with 20% higher MCAMA (p < 0.0001). Additionally, smoking 1-10 cigarettes per day was associated with 261% higher MCAMA (p < 0.0001), smoking 11-20 cigarettes per day was associated with 357% higher MCAMA (p < 0.0001), and smoking > 20 cigarettes per day was associated with 416% higher MCAMA (p < 0.0001). These findings underscore the strong association of tobacco smoke exposure with urinary MCAMA biomarker levels.

Association of urinary dimethylformamide metabolite with lung function decline: The potential mediating role of systematic inflammation estimated by C-reactive protein

Dimethylformamide (DMF) is a volatile organic compound listed as one of the four toxicants with the highest priority for human field study. However, the effect of DMF exposure on lung function and the underlying mechanisms remain unknown. We aimed to investigate the exposure-response relationship and possible mechanism between internal DMF exposure and lung function alteration. We studied 3701 Chinese adults from the Wuhan-Zhuhai cohort with a 3-year follow-up. The cross-sectional relationship between urinary biomarker of DMF exposure (N-Acetyl-S-(N-methylcarbamoyl)-L-cysteine, AMCC) and lung function, and the mediating role of plasma C-reactive protein (CRP) were assessed. We also convened a sub-cohort (N = 138) to assess the stability of AMCC in repeated urine samples collected for continuous 3 days and intervals of 1, 2 and 3 years. The longitudinal association between AMCC and lung function change in 3 years was further assessed. We found a dose-response relationship between AMCC and lung function reduction. Each 2-fold increase in AMCC was cross-sectionally associated with a 23.12-mL (95% CI: -36.68, -9.55) decrease in FVC and a 19.01-mL (95% CI: -31.08, -6.93) decrease in FEV₁. Increased CRP significantly mediated 5.39% and 5.87% of the AMCC-associated FVC and FEV₁ reductions, respectively. With 3-year follow-up, AMCC showed a fair to excellent stability (intra-class correlation coefficients were 0.88, 0.55, 0.60 and 0.50 for continuous 3 days, intervals of 1, 2 and 3 years, respectively) and was dose-dependently associated with longitudinal lung function decline. Compared with those with persistent low AMCC levels, participants with persistent high AMCC levels had a 101.09-mL/year (95% CI: -167.40, -34.77) decline in FVC and a 66.27-mL/year (95% CI: -114.14, -18.41) decline in FEV₁ in the sub-cohort. Similar results were found in the full-cohort. Our findings suggest that exposure of general population to environmental DMF may impair lung function, and systematic inflammation may be an underlying mechanism.

Occupational exposure to N,N-dimethylformamide in the summer and winter

We evaluated total body burden of N,N-dimethylformamide (DMF) taken through the lung and skin by personal exposure of workers to DMF and urinalysis of N-methylformamide (NMF) and N-acetyl-S(N-methylcarbamoyl)-cysteine (AMCC). A total of 270 workers were engaged in four different jobs in a workplace distant from main production lines emanating high levels of DMF. They were not required to wear any personal protective equipment including respirators or gloves. We found that log-transformed urinary levels of NMF and AMCC increased with an increase in log-transformed concentrations of exposure to DMF. Urinary levels of NMF and AMCC were significantly higher in the summer than the winter, although there was no significant seasonal difference in the concentrations of exposure to DMF. Our findings suggested that the increased urinary levels of NMF and AMCC in the summer resulted in increased skin absorption of DMF due to an increased amount of DMF absorbed by the moisturized skin under humid and hot conditions. Seasonal changes in the relative internal exposure index confirmed the present finding of enhanced summertime skin absorption of DMF. AMCC is thought to be a useful biomarker for assessments of cumulative exposure to DMF over a workweek and for evaluations of workers' health effects.

Short-term exposure to dimethylformamide and the impact on digestive system disease: an outdoor study for volatile organic compound

Occupational and experimental studies have revealed the organs most affected by dimethylformamide (DMF) are liver and gastrointestinal tract. However, few studies have focused on the potential effect of outdoor pollution of DMF. This study examined the health risk of hospitalization due to digestive system disease by time series studies in a case city Longwan, China. The urine metabolite of DMF was correlated well with DMF exposure concentration (EC). A 101.0-μg/m(3) (interquartile range) increase in the two-day moving average of DMF EC was associated with a 1.10 (1.01 ˜ 1.20), 1.22 (1.10 ˜ 1.35), and 1.05 (0.90 ˜ 1.22) increase in hospitalization for total digestive system diseases, liver disease, and gastrointestinal tract disease, respectively. The exposure-dose response between DMF and the relative risk of liver disease was linear only below 350 μg/m(3). These findings highlight a previously unrecognized health problem related to VOCs released into the outdoor environment.

Seasonal difference in percutaneous absorption of N,N-dimethylformamide as determined using two urinary metabolites

OBJECTIVE

We evaluated the percutaneous absorption of N,N-dimethylformamide (DMF) in DMF-exposed workers in the summer and winter by assessing their urinary levels of DMF metabolites.

METHODS

Breathing-zone concentrations of DMF and workers' urinary levels of N-methylformamide (NMF) and N-acetyl-S-(N-methylcarbamoyl)-cysteine (AMCC) were simultaneously measured in the summer and winter in 193 male workers wearing a respirator and chemical protective gloves.

RESULTS

The mean breathing-zone concentrations of DMF in both seasons were below the occupational exposure limit of 10 ppm. Although there was no significant seasonal difference in the breathing-zone concentrations of DMF, workers' urinary levels of NMF and AMCC were significantly higher in the summer than in the winter. Log-transformed urinary levels of the metabolites were significantly correlated with log-transformed breathing-zone concentrations of DMF in the summer, whereas no significant correlation between AMCC and DMF was found in the winter. The urinary levels of AMCC were dispersed more widely than those of NMF, suggesting that urinary AMCC reflected the cumulative exposure to DMF over a workweek.

CONCLUSIONS

Percutaneous absorption was the principal route of exposure to DMF for the respirator-wearing workers. Increased urinary levels of NMF and AMCC in the summer were attributed to increased percutaneous absorption of DMF resulting from the increased amount of water-soluble DMF absorbed by sweaty skin caused by the increased summertime room temperature and humidity.

Skin penetrating abilities and reservoir effects of neat DMF and DMF/water mixtures

This study was set out to determine the skin permeabilities of neat N, N-dimethylformamide (DMF, denoted as DMF(100%)) and DMF/water mixtures (including 50% DMF/50% water and 10% DMF/90% water mixtures (v/v), denoted as DMF(50%) and DMF(10%), respectively) and to assess their skin reservoir effects on the systemic absorption. The penetration fluxes for DMF(10%) and DMF(50%) (=0.015 and 0.126 mg/cm(2)/h, respectively) were only approximately 1.1%and 15% in magnitude as that of DMF(100%) (=0.872+/-0.231 mg/cm(2)/h), respectively. The above results could be because the perturbation effect of the DMF content was much more significant than the rehydration effect of the water content on skin permeability. We found that 85.9%, 96.6% and 98.7% of applied doses were still remaining on the skin surface, 4.98%, 0.838% and 0.181% were still remaining in the skin layer, and 9.09%, 2.61% and 1.17% penetrated through the skin layer after the 24-h exposure for DMF(100%), DMF(50%) and DMF(10%), respectively. We found that the half-life (T(1/2)) of DMF retaining in the skin layer were 12.3, 4.07 and 1.24h for DMF(100%), DMF(50%) and DMF(10%), respectively. The estimated reservoir effect for DMF(100%) (=34.1%) was higher than that of DMF(50%) and DMF(10%) (=27.1% and 14.1%, respectively). The above results suggest that the impact associated with the internal burden of DMF could be prolonged even the external exposure of DMF is terminated, particularly for those dermal contact with DMF/water mixtures with high DMF contents.

Simultaneous determination of mercapturic acids derived from ethylene oxide (HEMA), propylene oxide (2-HPMA), acrolein (3-HPMA), acrylamide (AAMA) and N,N-dimethylformamide (AMCC) in human urine using liquid chromatography/tandem mass spectrometry

Mercapturic acids are highly important and specific biomarkers of exposure to carcinogenic substances in occupational and environmental medicine. We have developed and validated a reliable, specific and very sensitive method for the simultaneous determination of five mercapturic acids derived from several high-production chemicals used in industry, namely ethylene oxide, propylene oxide, acrylamide, acrolein and N,N-dimethylformamide. Analytes are enriched and cleaned up from urinary matrix by offline solid-phase extraction. The mercapturic acids are subsequently separated by means of high-performance liquid chromatography on a Luna C8 (2) column and specifically quantified by tandem mass spectrometric detection using isotopically labelled analytes as internal standards. The limits of detection (LODs) for N-acetyl-S-2-carbamoylethylcysteine (AAMA) and N-acetyl-S-2-hydroxyethylcysteine (HEMA) were 2.5 microg/L and 0.5 microg/L urine, while for N-acetyl-S-3-hydroxypropylcysteine (3-HPMA), N-acetyl-S-2-hydroxypropylcysteine (2-HPMA) and N-acetyl-S-(N-methylcarbamoyl)cysteine (AMCC) it was 5 microg/L. These LODs were sufficient to detect the background exposure of the general population. We applied the method on spot urine samples of 28 subjects of the general population with no known occupational exposure to these substances. Median levels for AAMA, HEMA, 3-HPMA, 2-HPMA and AMCC in non-smokers (n = 14) were 52.6, 2.0, 155, 7.1 and 113.6 microg/L, respectively. In smokers (n = 14), median levels for AAMA, HEMA, 3-HPMA, 2-HPMA and AMCC were 243, 5.3, 1681, 41.7 and 822 microg/L, respectively. Due to the simultaneous quantification of these mercapturic acids, our method is well suited for the screening of workers with multiple chemical exposures as well as the determination of the background excretion of the general population.

Combining novel strategy with kinetic approach in the determination of respective respiration and skin exposure to N,N-dimethylformamide vapor

N,N-dimethylformamide (DMF) could be readily absorbed via skin and inhalation routes. It is difficult, however, to separate the internal dose contribution from skin vapor and inhalation exposure. This study attempts to quantitatively determine the separate skin vapor and inhalation exposure contributions using a semi-actual exposure approach. Six volunteers were tailgated by DMF-exposed employees completely for two exposure scenarios: with and without wearing a respirator. Individual airborne DMF (A-DMF) exposure was evaluated by integrating real-time DMF monitoring and time-activity log. Urinary N-methylformamide (U-NMF) concentrations in 4-h and 8-h one urine sample plus 24-h consecutive urine sample were determined to evaluate the internal DMF exposure dose. The average A-DMF concentrations for all participants were 8.10 (2.75) and 9.52 (3.47) ppm, respectively, for with respirator and without respirator scenarios. Area under the curve of U-NMF throughout 24-h showed 71% and 29% contribution from skin and inhalation exposure, respectively, indicates that the absorbed dose of DMF via skin vapor exposure was much greater than inhalation. In conclusion, the semi-actual approach provides a novel measure to accurately determine the relative skin vapor and inhalation exposure contributions to the internal dose. The skin vapor exposure deserves more attention in the prevention of chemical hazards in the exposed environment.

Biological monitoring of workers exposed to 4,4′-methylenediphenyl diisocyanate (MDI) in 19 French polyurethane industries

OBJECTIVES

To study the range of urinary levels of 4,4'-methylenedianiline (MDA), a metabolite of methylenediphenyl diisocyanate (MDI), across factories in the polyurethane industries and to evaluate the validity of this biomarker to assess MDI occupational exposure.

METHODS

Workers exposed to MDI, as well as non-occupationally exposed subjects, were studied and pre- and post-shift urine samples were collected from 169 workers of 19 French factories and 120 controls. Details on work activities and practices were collected by a questionnaire and workers were classified into three job categories. The identification and quantification of the total urinary MDA were performed by high-performance liquid chromatography with electrochemical detection (HPLC/EC).

RESULTS

For all the factories, MDA was detectable in 73% of the post-shift urine samples. These post-shift values, in the range of <0.10 (detection limit)-23.60 microg/l, were significantly higher than those of the pre-shift samples. Urinary MDA levels in the control group were in the range of < 0.10-0.80 microg/l. The degree of automation of the mixing operation (polyols and MDI) appears as a determinant in the extent of exposure levels. The highest amounts of MDA in urine were found in the spraying or hot processes. The excretion levels of the workers directly exposed to the hardener containing the MDI monomer were significantly higher than those of the other workers. In addition, skin exposure to MDI monomer or to polyurethane resin during the curing step were always associated with significant MDA levels in urine.

CONCLUSIONS

Total MDA in post-shift urine samples is a reliable biomarker to assess occupational exposure to MDI in various industrial applications and to help factories to improve their manufacturing processes and working practices. A biological guiding value not exceeding 7 microg/l (5 microg/g creatinine) could be proposed in France.

Determination of DMF modified DNA base N4-methylcarbamoylcytosine in human urine using off-line sample clean-up, two-dimensional LC and ESI-MS/MS detection

A sensitive internal standard method for the analysis of a DNA-adduct of N,N-dimethylformamide (N4-methylcarbamoylcytosine, NMC-C) in human urine has been developed. A sample pre-treatment involving an acidic hydrolysis is followed by the sample clean-up performed with solid-phase extraction (SPE) technique using a cation-exchange resin. A two-dimensional liquid chromatography is used to separate the target analyte from the matrix using first a C18 reversed phase column with incorporated hydrophilic moieties and then a C8 bonded reversed phase column for the final separation. Quantification is carried out by positive electrospray ionisation and mass spectrometry detection of the transitions from molecule ions to product ions (169-->112 and 172-->115) for the analyte and the labelled internal standard, respectively. The detection limit in urine reaches down to 8 ng/L (48 pmol/L). In the general population NMC-C could not be detected. In 10 out of 32 urine samples of occupationally to DMF exposed subjects NMC-C could be detected. The concentrations ranged up to 172 ng/L (1023 pmol/L) with a 95th percentile of 121 ng/L (720 pmol/L).

The use of biomarkers of exposure of N,N-dimethylformamide in health risk assessment and occupational hygiene in the polyacrylic fibre industry

BACKGROUND

N,N-dimethylformamide (DMF) was recently prioritised for field studies by the National Toxicology Program based on the potency of its reproductive toxic effects.

AIMS

To measure accurately exposure to DMF in occupational settings.

METHODS

In 35 healthy workers employed in the polyacrylic fibre industry, N-methylformamide (NMF) and N-acetyl-S-(N-methylcarbamoyl)cysteine (AMCC) in urine, and N-methylcarbamoylated haemoglobin (NMHb) in blood were measured. Workplace documentation and questionnaire information were used to categorise workers in groups exposed to low, medium, and high concentrations of DMF.

RESULTS

All three biomarkers can be used to identify occupational exposure to DMF. However, only the analysis of NMHb could accurately distinguish between workers exposed to different concentrations of DMF. The median concentrations were determined to be 55.1, 122.8, and 152.6 nmol/g globin in workers exposed to low, medium, and high concentrations of DMF, respectively. It was possible by the use of NMHb to identify all working tasks with increased exposure to DMF. While fibre crimpers were found to be least exposed to DMF, persons washing, dyeing, or towing the fibres were found to be highly exposed to DMF. In addition, NMHb measurements were capable of uncovering working tasks, which previously were not associated with increased exposure to DMF; for example, the person preparing the fibre forming solution.

CONCLUSIONS

Measurement of NMHb in blood is recommended rather than measurement of NMF and AMCC in urine to accurately assess exposure to DMF in health risk assessment. However, NMF and AMCC are useful biomarkers for occupational hygiene intervention. Further investigations regarding toxicity of DMF should focus on highly exposed persons in the polyacrylic fibre industry. Additional measurements in occupational settings other than the polyacrylic fibre industry are also recommended, since the population at risk and the production volume of DMF are high.

Total body burden arising from a week's repeated dermal exposure to N,N-dimethylformamide

BACKGROUND

Hazardous chemicals and their metabolites may accumulate in the body following repeated airborne exposures and skin contact.

AIMS

To estimate the contribution of skin absorption to total body burden of N,N-dimethylformamide (DMF) across a working week in two groups with similar levels of respiratory exposure but dissimilar skin contact.

METHODS

Twenty five workers in a synthetic leather (SL) factory, 20 in a copper laminate circuit board (CLCB) factory, and 20 age and sex matched non-DMF exposed subjects, were recruited. Environmental monitoring of DMF exposure via respiratory and dermal routes, as well as biological monitoring of pre-shift urinary N-methylformamide (U-NMF), were performed for five consecutive working days.

RESULTS

Environmental and biological monitoring showed no detectable exposure in controls. The average airborne DMF concentration (geometric mean (GM) 3.98 ppm, geometric standard deviation (GSD) 1.91 ppm), was insignificantly lower for SL workers than for CLCB workers (GM 4.49, GSD 1.84 ppm). Dermal DMF exposure and U-NMF values, however, were significantly higher for SL workers. A significant pattern of linear accumulation was found across a five day work cycle for SL workers but not for CLCB workers.

CONCLUSIONS

Dermal exposure to DMF over five consecutive days of occupational exposure can result in the accumulation of a significant DMF body burden. The long term exposure response under both repeated and intermittent conditions of substantial skin exposure is worthy of note.

Urinary biomarkers of occupational N,N-dimethylformamide (DMF) exposure attributed to the dermal exposure

OBJECTIVE

To evaluate whether the dermal exposure to N,N-dimethylformamide (DMF) exerts significant effects and to determine the unit increment of dermal exposure on the total body burden of two biomarkers in urine: metabolism-required N-methylformamide (U-NMF) and non-metabolized DMF (U-DMF) in actual occupational environments.

METHODS

Exposure via respiratory and dermal routes was assessed on an individual basis for 75 workers from four DMF-related factories directly exposed to DMF. Respiratory exposure was determined by breathing-zone sampling for a full-work shift, and dermal exposure was assessed on the palms and forearms of both hands by an adhesive tape-patch method. U-NMF and U-DMF collected immediately postshift were measured.

RESULTS

The average concentrations of airborne DMF, DMF on hands and on forearms, U-NMF, and U-DMF (GM) were 1.51 ppm, 0.04 microg/cm(2), 0.03 microg/cm(2), 0.47 mg/l, and 0.38 mg/l, respectively. In multiple linear regression tests, only airborne DMF and DMF on hands remained significantly (P<0.001) associated with U-NMF and U-DMF. Based on model estimates, the unit increment of hands' exposure (microg/cm(2)) could contribute to 0.53 and 0.46 mg/l of the increment of U-NMF and U-DMF, respectively, given a daily occupational airborne exposure to DMF at about 1.5 ppm.

CONCLUSIONS

Dermal exposure provides a substantial contribution to the total body burden of DMF. A control remedy such as the enforcement of wearing impermeable gloves by workers occupationally exposed to DMF should be implemented with the highest priority.

Benzylmercapturic acid is superior to hippuric acid and o-cresol as a urinary marker of occupational exposure to toluene

The present study was initiated to examine whether urinary benzylmercapturic acid (or N-acetyl-S-benzyl cysteine, BMA), a mercapturate metabolite of toluene, increases in relation to the intensity of toluene exposure, and whether this metabolite is a better marker of occupational exposure to toluene than two traditional markers, hippuric acid and o-cresol. Accordingly, end-of-shift urine samples were collected from 122 printers and 30 office clerks (all men) in the second half of a working week. Solvent (toluene) exposure of the day (8 h) was monitored by means of diffusive sampling. Quantitative relation with toluene showed that BMA had a greater correlation coefficient with toluene (r = 0.7) than hippuric acid (r = 0.6) or o-cresol (r = 0.6). The levels in the urine of the non-exposed control subjects were below the detection limit of 0.2 microg/l for BMA, whereas it was at substantial levels for hippuric acid and o-cresol (239 mg/l and 32 microg/l as a geometric mean, respectively). Thus, BMA, hippuric acid and o-cresol could separate the exposed from the non-exposed when toluene was at < 1, 50 and 3 ppm, respectively. Overall, therefore, it appeared reasonable to conclude that BMA is superior to hippuric acid and o-cresol as a marker of occupational exposure to toluene.

The effects of co-exposure to methyl ethyl ketone on the biological monitoring of occupational exposure to N,N-dimethylformamide

OBJECTIVES

(1) To assess whether urinary N,N-dimethylformamide (U-DMF) is suitable as a biomarker when co-exposure to methyl ethyl ketone (MEK) exists, and to evaluate whether it is suitable as an exposure biomarker of DMF. (2) To examine whether the co-exposure to MEK affects the characteristics of U-NMF and U-DMF. (3) To investigate if the difference in creatinine-adjusted and non-adjusted measurements of urinary biomarkers of DMF exposure is substantial.

METHODS

Personal exposure monitoring of N,N-dimethylformamide (DMF) and MEK on 11 synthetic-leather workers was performed for 5 consecutive days. Daily post-shift urine for each individual was collected and was analyzed for urinary N-methylformamide (U-NMF) and U-DMF levels on both non-adjusted and creatinine-adjusted bases.

RESULTS

Both U-NMF and U-DMF showed significant associations with airborne DMF. Positive and significant associations between U-NMF and U-DMF on either a non-adjusted basis or a creatinine-adjusted basis were found. Satisfactory linear associations ( P<0.01) between all kinds of urinary biomarkers and DMF exposure were found. The co-exposure to MEK exerted more effect on the relationship of airborne DMF to U-DMF than to U-NMF.

CONCLUSIONS

U-DMF is detectable when occupational DMF exposure is near or below the occupational exposure limit of 10 ppm. In view of the performance of sensitivity, specificity, and positive predictive value, U-NMF, in general, is superior to U-DMF. However, on a par with other findings in this and previous studies, U-DMF might be considered as a complimentary biomarker of exposure to DMF in addition to U-NMF. No distinction between creatinine-adjustment or non-adjustment for urine specimens was found in the biological monitoring of DMF exposure. Further exploration of the influence of co-exposure to MEK at higher exposure is warranted.

Mercapturic acids in the biological monitoring of occupational exposure to chemicals

This paper reviews several procedures for determination of mercapturic acids in urine. Special attention was paid to methods useful in relation to human exposure to industrial pollutants, without any description for less sensitive methods used in animal research. Gas chromatographic and liquid chromatographic procedures were considered together with the little information available about thin layer chromatography and immunochemical techniques. After a description of the main industrial pollutants which lead to synthesis of their specific mercapturic acids, the methods for analysing these products are synthetically reported. The comparison among difficulties in sample preparation, complexity of instrumentation and their cost/benefit ratio are discussed.