Effect of a laparoscopic instrument with rotatable handle piece on biomechanical stress during laparoscopic procedures

Unpacking the Broad Landscape of Intraoperative Stressors for Clinical Personnel: A Mixed-Methods Systematic Review

Purpose

The main goals of this mixed-methods systematic review are to identify what types of intraoperative stressors for operating room personnel have been reported in collected studies and examine the characteristics of each intraoperative stressor.

Methods

With a systematic literature search, we retrieved empirical studies examining intraoperative stress published between 2010 and 2020. To synthesize findings, we applied two approaches. First, a textual narrative synthesis was employed to summarize key study information of the selected studies by focusing on surgical platforms and study participants. Second, a thematic synthesis was employed to identify and characterize intraoperative stressors and their subtypes.

Results

Ninety-four studies were included in the review. Regarding the surgical platforms, the selected studies mainly focused on minimally invasive surgery and few studies examined issues around robotic surgery. Most studies examined intra-operative stress from surgeons' perspectives but rarely considered other clinical personnel such as nurses and anesthetists. Among seven identified stressors, technical factors were the most frequently examined followed by individual, operating room environmental, interpersonal, temporal, patient, and organizational factors.

Conclusion

By presenting stressors as multifaceted elements affecting collaboration and interaction between multidisciplinary team members in the operating room, we discuss the potential interactions between stressors which should be further investigated to build a safe and efficient environment for operating room personnel.

Intraoperative active and passive breaks during minimally invasive surgery influence upper extremity physical strain and physical stress response-A controlled, randomized cross-over, laboratory trial

OBJECTIVE

Investigate the effect of passive, active or no intra-operative work breaks on static, median and peak muscular activity, muscular fatigue, upper body postures, heart rate, and heart rate variability.

BACKGROUND

Although laparoscopic surgery is preferred over open surgery for the benefit of the patient, it puts the surgeons at higher risk for developing musculoskeletal disorders especially due to the less dynamic and awkward working posture. The organizational intervention intraoperative work break is a workplace strategy that has previously demonstrated positive effects in small-scale intervention studies.

METHODS

Twenty-one surgeons were exposed to three 90-min conditions: no breaks, 2.5-min passive (standing rest) or active (targeted stretching and mobilization exercises) breaks after 30-min work blocks. Muscular activity and fatigue of back, shoulder and forearm muscles were assessed by surface electromyography; upper body posture, i.e., spinal curvature, by inclination sensors; and heart rate and variability (HRV) by electrocardiography. Generalized estimating equations were used for statistical analyses. This study (NCT03715816) was conducted from March 2019 to October 2020.

RESULTS

The HRV-metric SDNN tended to be higher, but not statistically significantly, in the intervention conditions compared to the control condition. No statistically significant effects of both interventions were detected for muscular activity, joint angles or heart rate.

CONCLUSION

Intraoperative work breaks, whether passive or active, may counteract shoulder muscular fatigue and increase heart rate variability. This tendency may play a role in a reduced risk for developing work-related musculoskeletal disorders and acute physical stress responses.

Save our surgeons (SOS) - an explorative comparison of surgeons' muscular and cardiovascular demands, posture, perceived workload and discomfort during robotic vs. laparoscopic surgery

PURPOSE

Conventional laparoscopic surgery (CLS) imposes an increased risk of work-related musculoskeletal disorders. Technical innovations, such as robotic-assisted laparoscopic surgery (RALS), may provide ergonomic benefits. We compare the surgeon`s work-related demands of CLS vs RALS for benign hysterectomies.

METHODS

Five specialists (3 females, 2 males) each performed four RALS and four CLS as part of their daily clinical routine. During the surgical procedures, muscular demands were assessed by bipolar surface electromyograms of the descendent trapezius, extensor digitorum and flexor carpi radialis muscles as well as cardio-vascular demands by electrocardiography, and neck, arm and torso posture by gravimetrical position sensors. Additionally, the subjects rated their level of perceived workload (NASA TLX questionnaire with 6 dimension) and musculoskeletal discomfort (11-point Likert-scale, 0-10).

RESULTS

Muscular demands of the trapezius and flexor carpi radialis muscles were lower with RALS but extensor digitorum demands increased. Cardiovascular demands were about 9 heart beats per minute (bpm) lower for RALS compared to CLS with a rather low median level for both surgical techniques (RALS = 84 bpm; CLS 90 bpm). The posture changed in RALS with an increase in neck and torso flexion, and a reduction in abduction and anteversion position of the right arm. The perceived workload was lower in the physical demands dimension but higher in the mental demands dimension during RALS. Subjective musculoskeletal discomfort was rare during both surgical techniques.

CONCLUSIONS

This explorative study identified several potential ergonomic benefits related to RALS which now can be verified by studies using hypothesis testing designs. However, potential effects on muscular demands in the lower arm extensor muscles also have to be addressed in such studies.

Ergonomic Design and Assessment of an Improved Handle for a Laparoscopic Dissector Based on 3D Anthropometry

Laparoscopic surgery (LS) has been shown to provide great benefits to patients compared with open surgery. However, surgeons experience discomfort, low-efficiency, and even musculoskeletal disorders (MSDs) because of the poor ergonomic design of laparoscopic instruments. A methodology for the ergonomic design of laparoscopic dissector handles considering three-dimensional (3D) hand anthropometry and dynamic hand positions was addressed in this research. Two types of hand positions for grasping and stretching were scanned from 21 volunteers using a high-resolution 3D scanner. The 3D anthropometric data were extracted from these 3D hand pose models and used to design an improved handle (IH) that provides additional support for the thumb, a better fit to the purlicue, and a more flexible grasp for the index finger. Thirty subjects were invited to evaluate the IH in terms of muscular effort, goniometric study of motion, and efficiency and effectiveness during four trials of a laparoscopic training task. Questionnaires provided subjective parameters for ergonomic assessment. Positive results included less muscle load in the trapezius as well as significant but small angular differences in the upper limb. No significant reduction in the trial time and no increased percentage of the achievement were observed between the IH and the commercial handle (CH). Improved intuitiveness, comfort, precision, stability, and overall satisfaction were reported. IH provides significant ergonomic advantages in laparoscopic training tasks, demonstrating that the proposed methodology based on 3D anthropometry is a powerful tool for the handle design of laparoscopic dissectors and other surgical instruments.

Laparoscopic renal surgery using multi degree-of-freedom articulating laparoscopic instruments in a porcine model

PURPOSE

We evaluated the performance of a new multi-degree-of-freedom articulating laparoscopic instrument, ArtiSential, and compared it with that of a straight-shaped instrument and the da Vinci surgical system, in renal surgery using porcine model.

MATERIALS AND METHODS

Nine female Yorkshire pigs were equally divided into three groups. The three groups were compared at each surgical step in terms of objective and subjective parameters.

RESULTS

The median operative times for renal pedicle clamping and ureter dissection were significantly shorter in ArtiSential group than robotic group (1.3 min vs. 4.7 min, p=0.002; 8.1 min vs. 11.1 min, p=0.015). The median operative time for bladder repair was significantly longer in ArtiSential group than robotic and straight-shaped groups (17.9 min vs. 5.5 min, p=0.002; 17.9 min vs. 9.3 min, p=0.026). There were no significant differences among groups in terms of blood loss or intraoperative complications. ArtiSential device was less useable for renorrhaphy (p=0.009) and bladder repair (p=0.002) compared to the robotic system. ArtiSential group was less accurate than robotic group in terms of tumor resection, renorrhaphy, and bladder repair. During ureter dissection, bladder cuff excision, and bladder repair, the surgeon experienced greater wrist discomfort but lesser back discomfort in ArtiSential group than robotic group.

CONCLUSIONS

For most steps, ArtiSential performed as well as robotic and straight-shaped instruments. The development of specialized surgical techniques for ArtiSential will maximize the advantages of these instruments.

The assessment of muscle fatigue in orthopedic surgeons, by comparing manual versus automated broaching in simulated total hip arthroplasty

Total hip arthroplasty procedures are physically demanding for surgeons. Repetitive mallet swings to impact a surgical handle (impactions), can lead to muscle fatigue, discomfort, and injuries. The use of an automated surgical hammer may reduce fatigue and increase surgical efficiency. The aim of this study was to compare the effect of repeated manual and automated impactions on the user's muscle activation, by means of surface electromyography. Surface electromyography signals were recorded from eight muscles of seven (n = 7) orthopedic surgeons during repetitions of manual and automated impactions, to reach the same surgical outcome (broaching depth). Qualitative data was also captured to track the perceived fatigue and preferences of impaction modalities after completion of impaction tasks. Time to complete tasks, muscle activation, and muscle fatigue were quantified. Results showed a significant decrease in time required to reach the same broaching depth for the automated method compared to manual impactions (p = 0.001). A reduction in muscle fatigue and activation of right Brachioradialis muscle was observed during automated impactions (p = 0.018). A significant difference in fatigue was observed, with lower level of fatigue during automated impactions (p = 0.001). These results suggest that an automated surgical workflow might reduce the exposure to the impaction task and, therefore, muscle fatigue, with a reduced activation of the most engaged muscles. The study suggests that the burden on the user can be reduced by a change in the surgical methodology to perform broaching in total hip arthroplasty, which could potentially benefit surgical efficiency and reduce the risk of fatigue-based errors during a procedure.

The effectiveness of ergonomics interventions in reducing upper limb work-related musculoskeletal pain and dysfunction in sonographers, surgeons and dentists: a systematic review

The aim of this systematic review was to summarise the effects of ergonomics interventions on work-related upper limb musculoskeletal pain and dysfunction, and on productivity in sonographers, surgeons and dentists. A total of 31 studies were included. All studies reported effects on upper limb pain. Nine studies reported effects on dysfunction and only two studies reported effects on productivity. Moderately strong evidence in reducing upper limb pain was found for instigation of microbreaks into long duration surgical procedures, and the use of wider, lighter handles in dental instruments. Moderate evidence was also found for use of prismatic glasses and favourable positioning in reducing upper limb pain. Weak, inconsistent or no evidence was found for all other ergonomics interventions in reducing upper limb pain and dysfunction and increasing productivity. The lack of high quality research, particularly in sonographers and in the outcome of productivity, should be addressed. Practitioner summary: This systematic review investigates the effectiveness of ergonomics interventions on upper limb pain, dysfunction and productivity in sonographers, dentists and surgeons. Instigation of microbreaks during long duration procedures and the use of wider, lighter instrument handles were most effective in reducing upper limb work-related pain. Abbreviations: ANOVA: analysis of variance; CLS: conventional laparoscopic surgery; DMAIC: define, measure, analyze, improve and control; GRADE: grading of recommendations, assessment, development and evaluations; HD: high definition; PRISMA: preferred reporting items for systematic reviews and meta-analyses; PROSPERO: The International Prospective Register of Systematic Reviews; RCT: randomised control trial; SILS: single incision laparoscopic surgery; VITOM: video telescopic operative microscope; WNSWLHD: Western New South Wales Local Health District; WMSD: work related musculoskeletal disorder.

Active and passive work breaks during simulated laparoscopy among laparoscopic surgeons: study protocol for a controlled, randomised cross-over laboratory trial

INTRODUCTION

Laparoscopy has partially replaced open surgery due to the lower infection rate for the patient and hence better and shorter recovery. However, the surgeon's physical load is higher due to longer duration static and awkward body postures, increasing the risk for developing work-related musculoskeletal disorders. Interventions of an organisational nature are work breaks, being either passive or active. The primary objectives of this study are to determine whether passive and active work breaks lead to less discomfort than no work breaks and whether active work breaks lead to less discomfort than passive work breaks.

METHODS AND ANALYSIS

A controlled, randomised cross-over trial will be performed in the laboratory, of which its protocol is described here according to the Standard Protocol Items: Recommendations for Interventional Trials (SPIRIT) 2013 Statement. Recruitment of 21 laparoscopic surgeons started in April 2019 and the study is ongoing. The participating surgeons will perform three 1.5 hour experimental conditions, one without work breaks, one with 2.5 min passive work breaks including rest, and one with 2.5 min active work breaks including mobility and stretching exercises. The work breaks will be taken after 30 and 60 min of work. During the experiments, outcomes will be recorded. The primary outcome is rating of perceived discomfort measured on an 11-point numeric rating scale. The secondary outcomes are performance, muscle activity of selected muscles, upper body angles, heart rate, workload and subjective evaluation of both interventions. The collected data will be tested using a one-way or two-factorial repeated-measures analysis of variance.

ETHICS AND DISSEMINATION

Ethical approval of the study protocol was received by the local medical ethical committee of the University of Tübingen in February 2019 (no 618/2018BO2). The results of this study will be presented at national and international conferences, submitted for publications in peer-reviewed journals and serve as the starting point for a feasibility study.

TRIAL REGISTRATION NUMBER

NCT03715816.

An ergonomic field study to evaluate the effects of a rotatable handle piece on muscular stress and fatigue as well as subjective ratings of usability, wrist posture and precision during laparoscopic surgery: an explorative pilot study

PURPOSE

The interface between surgeon and the laparoscopic instrument is an important factor in biomechanical stress that may increase the risk of musculoskeletal complaints in surgeons. This article investigates the effect of a laparoscopic instrument with a rotatable handle piece (rot-HP) on muscular stress and fatigue during routine laparoscopic procedures (LP) as well as usability, wrist posture and working precision.

METHODS

40 LP (subtotal hysterectomies) performed by 11 surgeons were investigated. 20 LP were carried out with the rot-HP and 20 with a fixed (standard) laparoscopic handle piece instrument. Shoulder and arm muscle activity was monitored via surface electromyography (sEMG). The electrical activity (EA) and median power frequency (MPF) were used to determine muscular stress and fatigue. Usability, wrist posture, and working precision between handle piece conditions were assessed by a survey.

RESULTS

Using the rot-HP did not reduce muscular stress. A tendency of muscular fatigue (increasing EA, decreasing MPF) occurred in the upper trapezius, middle deltoid and extensor digitorum muscles; however, no differences were found between handle pieces. Wrist posture was more comfortable using the rot-HP and working precision and usability tended to be preferred using the standard handle piece.

CONCLUSIONS

Although wrist posture seemed to be optimized by the rot-HP, no effect on muscular stress and fatigue was observed in routine LP (< 60 min duration). Optimization of wrist posture may provide positive effects in mid- or long-term procedures. However, sufficient familiarization with the new instrument is crucial since working precision and usability could be impaired.