Prediction of fluid pattern in a shear flow on intelligent neural nodes using ANFIS and LBM

ANFIS algorithm for mapping computational data of water reservoir homogenization with air bubble flows

Air as an inert gas is usually applied for homogenization and mixing liquids. In the current research, we study a 3-D bubble column reactor (BCR) filled with water by using an Artificial intelligence algorithm (AI) and CFD. We used one of the adaptive networks and fuzzy inference systems (ANFIS) to study fluid flow and see its effect on the accuracy of the AI. Therefore, the Gaussian membership function was used to have a prediction in the 3-D BCR. Also, the grid partition system was used to cluster the data. The number of membership functions increases in the training process of the AI system, from 2 to 5. The influence of input numbers on AI data prediction is analyzed. The four inputs in the training process included air velocity and pressure, as well as the x-direction and z-direction. Finally, air vorticity was considered as the output parameter of the study in the predictions. Correlations were developed to predict the air vorticity in each node using x and z direction, air velocity, and pressure. The results showed the AI accuracy increased by the rise of membership and input numbers. The AI intelligence level was found by five memberships and four inputs. The AI and CFD were in suitable agreement (regression number around 1). The developed correlations could simplify the calculation of air vorticity instead of using the complicated and time-consuming CFD simulation. As far as the authors know, there are no studies that have developed correlations to find the air vorticity in bubble column reactors.

Using the integrated neural network of radial basis function (RBF) via optimization algorithms to estimate pile settlement range

The Pile motion seems to be one of the most critical in pile failure that requires appraisal before installing piles. The variables to estimate the Pile Settlement parameter, there are several methods. Among existing theoretical ways to investigate the pile movement mathematically, most studies have tried to model the piles’ settlement overloading period using artificial intelligence. Thus, this research has used the Artificial Neural Network to have the actual status of pile motion vertically over the loading periods dynamically and statically. Therefore, the present research has utilized the Radial Basis Function Neural Network joint with Equilibrium Optimizer Algorithm and Grasshopper Optimization Algorithm to figure out the optimum number of neurons within the hidden layer. Kuala Lumpur’s Klang Valley Mass Rapid Transit transportation network, Malaysia, opted to model the piles’ settlement and earth properties via the proposed hybrid RBF-GOA and RBF-EOA frameworks. By modeling both frameworks, the error index of RMSE for RBF-GOA and HRBF-EOA were gained to 0.6312 and 0.5947, respectively. However, the VAF indicator showed identical results of the rates 96.98 and 97.33, respectively. Overly, the RBF-EOA represented better than RBF-GOA by little efficiency.

Neural-based modeling adsorption capacity of metal organic framework materials with application in wastewater treatment

We developed a computational-based model for simulating adsorption capacity of a novel layered double hydroxide (LDH) and metal organic framework (MOF) nanocomposite in separation of ions including Pb(II) and Cd(II) from aqueous solutions. The simulated adsorbent was a composite of UiO-66-(Zr)-(COOH)2 MOF grown onto the surface of functionalized Ni50-Co50-LDH sheets. This novel adsorbent showed high surface area for adsorption capacity, and was chosen to develop the model for study of ions removal using this adsorbent. A number of measured data was collected and used in the simulations via the artificial intelligence technique. Artificial neural network (ANN) technique was used for simulation of the data in which ion type and initial concentration of the ions in the feed was selected as the input variables to the neural network. The neural network was trained using the input data for simulation of the adsorption capacity. Two hidden layers with activation functions in form of linear and non-linear were designed for the construction of artificial neural network. The model's training and validation revealed high accuracy with statistical parameters of R2 equal to 0.99 for the fitting data. The trained ANN modeling showed that increasing the initial content of Pb(II) and Cd(II) ions led to a significant increment in the adsorption capacity (Qe) and Cd(II) had higher adsorption due to its strong interaction with the adsorbent surface. The neural model indicated superior predictive capability in simulation of the obtained data for removal of Pb(II) and Cd(II) from an aqueous solution.

Prediction of gas velocity in two-phase flow using developed fuzzy logic system with differential evolution algorithm

In this investigation, differential evolution (DE) algorithm with the fuzzy inference system (FIS) are combined and the DE algorithm is employed in FIS training process. Considered data in this study were extracted from simulation of a 2D two-phase reactor in which gas was sparged from bottom of reactor, and the injected gas velocities were between 0.05 to 0.11 m/s. After doing a couple of training by making some changes in DE parameters and FIS parameters, the greatest percentage of FIS capacity was achieved. By applying the optimized model, the gas phase velocity in x direction inside the reactor was predicted when the injected gas velocity was 0.08 m/s.

Velocity prediction of nanofluid in a heated porous pipe: DEFIS learning of CFD results

Utilizing artificial intelligence algorithm of adaptive network-based fuzzy inference system (ANFIS) in combination with the computational lfuid dynamics (CFD) has recently revealed great potential as an auxiliary method for simulating challenging fluid mechnics problems. This research area is at the beginning, and needs sophisticated algorithms to be developed. No studies are available to consider the efficiency of the other trainers like differential evolution (DE) integrating with the FIS for capturing the pattern of the simulation results generated by CFD technique. Besides, the adjustment of the tuning parameters of the artificial intelligence (AI) algorithm for finding the highest level of intelligence is unavailable. The performance of AI algorithms in the meshing process has not been considered yet. Therfore, herein the Al₂O₃/water nanofluid flow in a porous pipe is simulated by a sophisticated hybrid approach combining mechnsitic model (CFD) and AI. The finite volume method (FVM) is employed as the CFD approach. Also, the differential evolution-based fuzzy inference system (DEFIS) is used for learning the CFD results. The DEFIS learns the nanofluid velocity in the y-direction, as output, and the nodes coordinates (i.e., x, y, and z), as inputs. The intelligence of the DEFIS is assessed by adjusting the methd's variables including input number, population number, and crossover. It was found that the DEFIS intelligence is related to the input number of 3, the crossover of 0.8, and the population number of 120. In addition, the nodes increment from 4833 to 774,468 was done by the DEFIS. The DEFIS predicted the velocity for the new dense mesh without using the CFD data. Finally, all CFD results were covered with the new predictions of the DEFIS.

Pressure and temperature predictions of Al2O3/water nanofluid flow in a porous pipe for different nanoparticles volume fractions: combination of CFD and ACOFIS

Artificial intelligence (AI) techniques have illustrated significant roles in finding general patterns of CFD (Computational fluid dynamics) results. This study is conducted to develop combination of the ant colony optimization (ACO) algorithm with the fuzzy inference system (ACOFIS) for learning the CFD results of a physical case study. This binary join of the ACOFIS and CFD was used for pressure and temperature predictions of Al₂O₃/water nanofluid flow in a heated porous pipe. The intelligence of ACOFIS is investigated for different input numbers and pheromone effects, as the ant colony tuning parameter. The results showed that the intelligence of the ACOFIS could be found for three inputs (x and y nodes coordinates and nanoparticles fraction) and the pheromone effect of 0.1. At the system intelligence, the ACOFIS could predict the pressure and temperature of the nanofluid on any values of the nanoparticles fraction between 0.5 and 2%. Comparing the ANFIS and the ACOFIS, it was shown that both methods could reach the same accuracy in predictions of the nanofluid pressure and temperature. The root mean square error (RMSE) of the ACOFIS (~ 1.3) was a little more than that of the ANFIS (~ 0.03), while the total process time of the ANFIS (~ 213 s) was a bit more than that of the ACOFIS (~ 198 s). The AI algorithms process time (less than 4 min) shows their ability in the reduction of CFD modeling calculations and expenses.

Liquid temperature prediction in bubbly flow using ant colony optimization algorithm in the fuzzy inference system as a trainer

In the current research paper a novel hybrid model combining first-principle and artificial intelligence (AI) was developed for simulation of a chemical reactor. We study a 2-dimensional reactor with heating sources inside it by using computational fluid dynamics (CFD). The type of considered reactor is bubble column reactor (BCR) in which a two-phase system is created. Results from CFD were analyzed in two different stages. The first stage, which is the learning stage, takes advantage of the swarm intelligence of the ant colony. The second stage results from the first stage, and in this stage, the predictions are according to the previous stage. This stage is related to the fuzzy logic system, and the ant colony optimization learning framework is build-up this part of the model. Ants movements or swarm intelligence of ants lead to the optimization of physical, chemical, or any kind of processes in nature. From point to point optimization, we can access a kind of group optimization, meaning that a group of data is studied and optimized. In the current study, the swarm intelligence of ants was used to learn the data from CFD in different parts of the BCR. The learning was also used to map the input and output data and find out the complex connection between the parameters. The results from mapping the input and output data show the full learning framework. By using the AI framework, the learning process was transferred into the fuzzy logic process through membership function specifications; therefore, the fuzzy logic system could predict a group of data. The results from the swarm intelligence of ants and fuzzy logic suitably adapt to CFD results. Also, the ant colony optimization fuzzy inference system (ACOFIS) model is employed to predict the temperature distribution in the reactor based on the CFD results. The results indicated that instead of solving Navier–Stokes equations and complex solving procedures, the swarm intelligence could be used to predict a process. For better comparisons and assessment of the ACOFIS model, this model is compared with the genetic algorithm fuzzy inference system (GAFIS) and Particle swarm optimization fuzzy inference system (PSOFIS) method with regards to model accuracy, pattern recognition, and prediction capability. All models are at a similar level of accuracy and prediction ability, and the prediction time for all models is less than one second. The results show that the model’s accuracy with low computational learning time can be achieved with the high number of CIR (0.5) when the number of inputs ≥ 4. However, this finding is vice versa, when the number of inputs < 4. In this case, the CIR number should be 0.2 to achieve the best accuracy of the model. This finding could also highlight the importance of sensitivity analysis of tuning parameters to achieve an accurate model with a cost-effective computational run.

Multidimensional machine learning algorithms to learn liquid velocity inside a cylindrical bubble column reactor

For understanding the complex behavior of fluids in a multiphase chemical bubble column reactor, a combination of the computational fluid dynamic (CFD) method and the adaptive network-based fuzzy inference system (ANFIS) method is used to predict bubble flow inside a reactor based on the function of column height. In this study, the Euler–Euler model is employed as a CFD method. In the Eulerian method, continuity and momentum governing equations are mathematically computed for each phase, while the equations are connected together by source terms. After calculating the flow pattern and turbulence flow in the reactor, all data sets are used to prepare a fully artificial method for further prediction. This algorithm contains different learning dimensions such as learning in different directions of reactor or large amount of input parameters and data set representing “big data”. The ANFIS method was evaluated in three steps by using one, two, and three inputs in each one to predict the liquid velocity in the x-direction (Ux). The x, y, and z coordinates of the location of the node of the liquid were considered as the inputs. Different percentages of data and various iterations and membership functions were used for training in the ANFIS method. The ANFIS method showed the best prediction using three inputs. This combination also shows the ability of computer science and computational methods in learning physical and chemical phenomena.

Computational Modeling of Transport in Porous Media Using an Adaptive Network-Based Fuzzy Inference System

This investigation is conducted to study the integration of the artificial intelligence (AI) method with computational fluid dynamics (CFD). The case study is hydrodynamic and heat-transfer analyses of water flow in a metal foam tube under a constant wall heat flux (i.e., 55 kW/m²). The adaptive network-based fuzzy inference system (ANFIS) is an AI method. A 3D CFD model is established in ANSYS-FLUENT software. The velocity of the fluid in the x-direction (Ux) is considered as an output of the ANFIS. The x, y, and z coordinates of the node's location are added to the ANFIS step-by-step to achieve the best intelligence. The number and type of membership functions (MFs) are changed in each step. The training process is done by the CFD results on the tube cross-sections at different lengths (i.e., z = 0.1, 0.2, 0.3, 0.4, 0.6, 0.7, 0.8, and 0.9), while all data (including z = 0.5) are selected for the testing process. The results showed that the ANFIS reaches the best intelligence with all three inputs, five MFs, and "gbellmf"-type MF. At this condition, the regression number is close to 1.

Functional input and membership characteristics in the accuracy of machine learning approach for estimation of multiphase flow

In the current study, Artificial Intelligence (AI) approach was used for the learning of a physical system. We applied four inputs and one output in the learning process of AI. In the learning process, the inputs are space locations of a BCR (bubble column reactor), which are x, y, and z coordinate as well as the amount of gas fraction in BCR. The liquid velocity is also considered as output. A variety of functions were used in learning, such as gbellmf and gaussmf functions, to examine which functions can give the best learning. At the end of the study, all of the results were compared to CFD (computational fluid dynamics). A three-dimensional (3D) BCR was used in this research, and we studied simulation by CFD as well as AI. The data from CFD in a 3D BCR was studied in the AI domain. In AI, we tuned for various parameters to achieve the best intelligence in the system. For instance, different inputs, different membership functions, different numbers of membership functions were used in the learning process. Moreover, the meshless prediction was used, meaning that some data in the BCR have not participated in the learning, and they were predicted in the prediction process, which gives us a special capability to compare the results with the CFD outcomes. The findings showed us that AI can predict the CFD results, and a great agreement was achieved between CFD computing nodes and AI elements. This novel methodology can suggest a meshless and multifunctional AI model to simulate the turbulence flow in the BCR. For further evaluation, the ANFIS method is compared with ACOFIS and PSOFIS methods with regards to model’s accuracy. The results show that ANFIS method contains higher accuracy and prediction capability compared with ACOFIS and PSOFIS methods.

gbell Learning function along with Fuzzy Mechanism in Prediction of Two-Phase Flow

The integration of the computational fluid dynamics (CFD) and the adaptive network-based fuzzy inference system, known as ANFIS, is investigated for simulating the hydrodynamic in a bubble column reactor. The Eulerian-Eulerian two-phase model is employed as the CFD approach. For the ANFIS technique, a sensitivity analysis is done by varying the number of inputs and the number of membership functions (MFs). The x and z coordinates of the fluid location, the air velocity, and the pressure are considered as the inputs of the ANFIS, while the air vorticity is the output. The results revealed that the ANFIS with all four inputs and the MFs of five achieved the highest intelligence with the regression number close to 1. More specifically, gbell function in the learning framework is used to train all local computing nodes from solving Navier-Stokes equations. In the decision or prediction part, the fuzzy mechanism is used for the prediction of extra nodes that solve, which Navier-Stokes equations did not solve. The results show that the gbell function enables us to fully train all numerical points and also store data set in the frame of mathematical equations. Besides, this function responds well with the number of inputs and MFs for accurate prediction of reactor hydrodynamics. Additionally, a high number of MFs and input parameters influence the accuracy of the method during prediction. In the current study, gbell MF was studied to investigate its accuracy in the prediction of the two-phase flow. Also, different numbers of MFs were considered to investigate the level of accuracy and capability of prediction. ANFIS clustering methods, grid partition and fuzzy C-mean (FCM) clustering, are compared to see the ability of the method in prediction. To compare the accuracy of the ANFIS method with FCM clustering, the data were compared to the gaussmf function. The results showed that the method has high accuracy and that it could predict the flow pattern.

Simulation of liquid flow with a combination artificial intelligence flow field and Adams-Bashforth method

Direct numerical simulation (DNS) of particle hydrodynamics in the multiphase industrial process enables us to fully learn the process and optimize it on the industrial scale. However, using high-resolution computational calculations for particle movement and the interaction between the solid phase and other phases in fine timestep is limited to excellent computational resources. Solving the Eulerian flow field as a source of solid particle movement can be very time-consuming. However, by the revolution of the fast and accurate learning process, the Eulerian domain can be computed by smart modeling in a very short computational time. In this work, using the machine learning method, the flow field in the square shape cavity is trained, and then the Eulerian framework is replaced with a machine learning method to generate the artificial intelligence (AI) flow field. Then the Lagrangian framework is coupled with this AI flow field, and we simulate particle motion through the fully AI framework. The Adams–Bashforth finite element method is used as a conventional CFD method (Eulerian framework) to simulate the flow field in the cavity. After simulating fluid flow, the ANFIS method is used as an AI model to train the Eulerian data-set and represents AI fluid flow (framework). The Lagrangian framework is coupled with the AI method, and the particle freely migrates through this artificial framework. The results reveal that there is a great agreement between Euler-Lagrangian and AI- Lagrangian in the cavity. We also found that there is an excellent agreement between AI overview with the Adams–Bashforth approach, and the new combination of machine learning and CFD method can accelerate the calculation of the flow field in the square-shaped cavity. AI model can mimic the vortex structure in the cavity, where there is a zero-velocity structure in the center of the domain and maximum velocity near the moving walls.

Influence of number of membership functions on prediction of membrane systems using adaptive network based fuzzy inference system (ANFIS)

In membrane separation technologies, membrane modules are used to separate chemical components. In membrane technology, understanding the behavior of fluids inside membrane module is challenging, and numerical methods are possible by using computational fluid dynamics (CFD). On the other hand, the optimization of membrane technology via CFD needs time and computational costs. Artificial Intelligence (AI) and CFD together can model a chemical process, including membrane technology and phase separation. This process can learn the process by learning the neural networks, and point by point learning of CFD mesh elements (computing nodes), and the fuzzy logic system can predict this process. In the current study, the adaptive neuro-fuzzy inference system (ANFIS) model and different parameters of ANFIS for learning a process based on membrane technology was used. The purpose behind using this model is to see how different tuning parameters of the ANFIS model can be used for increasing the exactness of the AI model and prediction of the membrane technology. These parameters were changed in this study, and the accuracy of the prediction was investigated. The results indicated that with low number of inputs, poor regression was obtained, less than 0.32 (R-value), but by increasing the number of inputs, the AI algorithm led to an increase in the prediction capability of the model. When the number of inputs increased to 4, the R-value was increased to 0.99, showing the high accuracy of model as well as its high capability in prediction of membrane process. The AI results were in good agreement with the CFD results. AI results were achieved in a limited time and with low computational costs. In terms of the categorization of CFD data-set, the AI framework plays a critical role in storing data in short memory, and the recovery mechanism can be very easy for users. Furthermore, the results were compared with Particle Swarm Optimization (PSOFIS), and Genetic Algorithm (GAFIS). The time for prediction and learning were compared to study the capability of the methods in prediction and their accuracy.

ANFIS grid partition framework with difference between two sigmoidal membership functions structure for validation of nanofluid flow

In this study, a square cavity is modeled using Computational Fluid Dynamics (CFD) as well as artificial intelligence (AI) approach. In the square cavity, copper (Cu) nanoparticle is the nanofluid and the flow velocity characteristics in the x-direction and y-direction, and the fluid temperature inside the cavity at different times are considered as CFD outputs. CFD outputs have been assessed using one of the artificial intelligence algorithms, such as a combination of neural network and fuzzy logic (ANFIS). As in the ANFIS method, we have a non-dimension procedure in the learning step, and there is no issue in combining other characteristics of the flow and thermal distribution beside the x and y coordinates, we combine two coordinate parameters and one flow parameter. This ability of method can be considered as a meshless learning step that there is no instability of the numerical method or limitation of boundary conditions. The data were classified using the grid partition method and the MF (membership function) type was dsigmf (difference between two sigmoidal membership functions). By achieving the appropriate intelligence in the ANFIS method, output prediction was performed at the points of cavity which were not included in the learning process and were compared to the existing data (the results of the CFD method) and were validated by them. This new combination of CFD and the ANFIS method enables us to learn flow and temperature distribution throughout the domain thoroughly, and eventually predict the flow characteristics in short computational time. The results from AI in the ANFIS method were compared to the ant colony and fuzzy logic methods. The data from CFD results were inserted into the ant colony system for the training process, and we predicted the data in the fuzzy logic system. Then, we compare the data with the ANFIS method. The results indicate that the ANFIS method has a high potentiality compared to the ant colony method because the amount of R in the ANIFS system is higher than R in the ant colony method. In the ANFIS method, R is equal to 0.99, and in the ant colony method, R is equal to 0.91. This shows that the ant colony needs more time for both the prediction and training of the system. Also, comparing the pattern recognition in the two systems, we can obviously see that by using the ANFIS method, the predictions completely match the target points. But the other method cannot match the flow pattern and velocity distribution with the CFD method.

Developing Intelligent Algorithm as a Machine Learning Overview over the Big Data Generated by Euler-Euler Method To Simulate Bubble Column Reactor Hydrodynamics

A bubble column reactor is simulated by a combination of Euler-Euler and adaptive network-based fuzzy inference system (ANFIS) method to develop an understanding of the machine learning (ML) technique in describing complex behavior of multiphase flow in bubble column reactors and for deep learning of input and output connections. In the validation stage of simulations, an intelligent bubble column is created that uses artificial intelligence nodes or neural network nodes, and the results of prediction indicated excellent agreement with computational fluid dynamics (CFD) simulation results. The hydrodynamic characteristics of the air bubbles and the amount of stress inside the bubble column reactor are used as the output of the ANFIS method. This study showed that when a three-dimensional bubble column is trained by a ML method, a similar CFD simulation can be created, which is independent of CFD source data. This type of smart simulation also enables us to avoid repeating the simulations with CFD methods that are time-consuming and computationally expensive for process modeling and optimization.

Changes in the Number of Membership Functions for Predicting the Gas Volume Fraction in Two-Phase Flow Using Grid Partition Clustering of the ANFIS Method

A 2D-bubble column reactor (BCR) including gas and liquid phases is simulated, and fluid characteristics such as gas-phase volume fraction and gas-phase turbulence are extracted from the CFD simulations. A type of heuristic algorithm called adaptive network-based fuzzy inference system (ANFIS) is applied here to simulate the gas-phase volume fraction in a physical system. Indeed, the x direction, the y direction, and gas-phase turbulence are considered as the ANFIS inputs. Changes in the number of inputs as well as membership functions are evaluated and studied to obtain a high level of ANFIS intelligence. By implementing the highest ANFIS intelligence, a surface is predicted, which suggests that the gas-phase volume fraction is based on x and y directions. It provides capability to achieve the amount of gas-phase volume fraction in different points of a 2D-BCR.

Prediction of Nanofluid Temperature Inside the Cavity by Integration of Grid Partition Clustering Categorization of a Learning Structure with the Fuzzy System

In this study, a quadratic cavity is simulated using computational fluid dynamics (CFD). The simulated cavity includes nanofluids containing copper (Cu) nanoparticles. The L-shaped thermal element exists in this cavity to produce heat distribution along with the domain. Results such as fluid velocity distribution in two dimensions and the fluid temperature field were generated as CFD simulation results. These outputs were evaluated using an adaptive neuro-fuzzy inference system (ANFIS) for learning and then the prediction process. In the training process related to the ANFIS method, x coordinates, y coordinates, and fluid temperature are three inputs, and the fluid velocity in line with Y is the output. During the learning process, the data have been classified using a clustering method called grid clustering. In line with the attempt to rise ANFIS intelligence, the alterations in the number of input parameters and of membership structure have been analyzed. After reaching the highest level of intelligence, the fluid velocity nodes were predicted to be in line with y, especially cavity nodes, which were absent in CFD simulations. The simulation findings indicated that there is a good agreement between CFD and clustering approach, while the total simulation time for learning and prediction is shorter than the time needed for calculation using the CFD method.