Anterior release without odontoidectomy for irreducible atlantoaxial dislocation: transoral or endoscopic transnasal?

Clinical effect and prognosis of transoral or endoscope-assisted transoral release for irreducible atlantoaxial dislocation: A retrospective cohort study

Background

The clinical applications of endoscope-assisted transoral release for irreducible atlantoaxial dislocations are limited. This study aimed to investigate the clinical effect and prognostic factors of traditional and endoscope-assisted transoral release, as well as posterior reduction and fixation, in treating irreducible atlantoaxial dislocations.

Materials and methods

We conducted a retrospective study on 59 patients with irreducible atlantoaxial dislocation who underwent either traditional or endoscope-assisted transoral release, posterior fixation, and fusion between January 2018 and January 2023. Various data, including surgical time, blood loss, drainage volume, oral intake, hospital stay, complications, and neurological status (assessed by the Japanese Orthopedic Association [JOA] score and Oswestry Disability Index [ODI]), were recorded. Imaging parameters such as the atlantodontoid interval (ADI), space available for the cord (SAC), and cervicomedullary angle (CMA) were analyzed and compared. In addition, the correlation between ODI, JOA and patient age, course of disease, preoperative ADI, SAC and CMA were analyzed.

Results

No significant differences were observed in age, sex, BMI, preoperative ADI, preoperative SAC, or preoperative CMA. All patients achieved excellent reduction with no significant differences between the two groups. Patients in the endoscopic group experienced significantly reduced blood loss, earlier oral intake, and shorter hospital stays compared to those in the open group (P < 0.05). The ODI and JOA scores improved significantly in both groups at 1, 6, 12, 18, and 24 months postoperatively (P < 0.05). Postoperative ADI, SAC, and CMA values in both groups were significantly better than preoperative values (P < 0.001). The patient age, course of disease and the preoperative ADI were negatively correlated with the postoperative ODI and the JOA improvement ratio (P < 0.01), and the preoperative SAC and preoperative CMA had positive correlations with the postoperative ODI and the JOA improvement ratio (P < 0.01) at 6, 12 and 24 months postoperatively.

Conclusion

Patient age, course of disease, preoperative ADI, SAC and CMA are correlated with the operative prognosis of irreducible atlantoaxial dislocation. The endoscope-assisted transoral approach, compared to the traditional transoral approach, is minimally invasive, resulting in less operative blood loss, earlier oral intake and a shorter length of hospital stay, which could be offered as an alternative for irreducible atlantoaxial dislocation.

The development of posterior reduction forceps for atlantoaxial dislocation and its preliminary application in irreducible atlantoaxial dislocation

OBJECTIVE

To develop posterior reduction forceps for atlantoaxial dislocation and evaluate the preliminary clinical application of this forceps in assisting simple posterior screw-rod system reduction and fixation in the treatment of irreducible atlantoaxial dislocation.

METHODS

Based on the posterior atlantoaxial screw-rod system, posterior reduction forceps was developed to assist simple posterior screw-rod system for the treatment of irreducible atlantoaxial dislocation. From January 2021 to October 2022, 10 cases with irreducible atlantoaxial dislocation were treated with this technique. The Japanese Orthopaedic Association (JOA) score was applied before and after surgery to evaluate the neurological status of the patient, and the Atlanto-dental interval (ADI) was measured before and after surgery to evaluate the atlantoaxial reduction. X-ray and CT were performed to evaluate internal fixation, atlantoaxial sequence and bone graft fusion during regular follow-up. MRI was performed to evaluate the status of atlantoaxial reduction and spinal cord compression after surgery.

RESULTS

All 10 patients were successfully operated, and there were no complications such as spinal nerve and vascular injury. Postoperative clinical symptoms were significantly relieved in all patients, and postoperative JOA score and ADI were significantly improved compared with those before surgery (P < 0.05).

CONCLUSIONS

The developed posterior reduction forceps for atlantoaxial dislocation can assist the simple posterior screw-rod system in the treatment of irreducible atlantoaxial dislocation to avoid the release in anterior or posterior approach and reduce the difficulty of surgery. The preliminary results of this technique are satisfactory and it has a good application prospect.

The retropharyngeal reduction plate for atlantoaxial dislocation: a finite element analysis

Objective: To investigate the biomechanical properties of the retropharyngeal reduction plate by comparing the traditional posterior pedicle screw-rod fixation by finite element analysis. Methods: Two three-dimensional finite element digital models of the retropharyngeal reduction plate and posterior pedicle screw-rod fixation were constructed and validated based on the DICOM (Digital Imaging and Communications in Medicine) data from C1 to C4. The biomechanical finite element analysis values of two internal fixations were measured and calculated under different conditions, including flexion, extension, bending, and rotation. Results: In addition to the backward extension, there was no significant difference in the maximum von Mises stress between the retropharyngeal reduction plate and posterior pedicle screw fixation under other movement conditions. The retropharyngeal reduction plate has a more uniform distribution under different conditions, such as flexion, extension, bending, and rotation. The stress tolerance of the two internal fixations was basically consistent in flexion, extension, left bending, and right bending. Conclusion: The retropharyngeal reduction plate has a relatively good biomechanical stability without obvious stress concentration under different movement conditions. It shows potential as a fixation option for the treatment of atlantoaxial dislocation.

Posterior hybrid surgery for atlantoaxial dislocation coexisting with multilevel cervical spondylotic myelopathy

Background

To introduce a hybrid surgery of posterior craniovertebral fusion plus subaxial laminoplasty for atlantoaxial dislocation (AAD) coexisting with multilevel cervical spondylotic myelopathy (CSM).

Methods

A retrospective study was performed by reviewing data from 23 patients with the coexistence of AAD and CSM who underwent the hybrid technique (n = 23). Clinical outcomes, including visual analogue scale (VAS), Japanese Orthopaedic Association (JOA), and neck disability index (NDI) score, and radiological cervical alignment parameters including C0-2 and C2-7 Cobb angle and range of motion (ROM) were analyzed. The operation time, blood loss, surgical levels, and complications were recorded.

Results

The included patients were followed up with an average of 20.91 months (range, 12-36 months). Clinical outcomes including JOA, NDI, and VAS scores were significantly improved at different postoperative follow-up points. C0-2 Cobb angle, C2-7 Cobb angle, and ROM showed a stable tendency after 1-year follow-up. No major perioperative complications occurred.

Conclusion

This study underlined the importance of pathologic condition of AAD coexisting with CSM and presented a novel hybrid approach of posterior craniovertebral fusion plus subaxial laminoplasty. This hybrid surgery was effective in achieving the desired clinical outcomes and better maintaining cervical alignment, proving its value and safety as an alternative technique.

The clinical validity of atlantoaxial joint inclination angle and reduction index for atlantoaxial dislocation

Objective

Atlantoaxial dislocation patients with neurological defects require surgery. Sometimes, release surgery is necessary for irreducible atlantoaxial dislocation to further achieve reduction. Whether release surgery is essential relies on the surgeon's experience and lacks objective reference criteria. To evaluate the value of atlantoaxial joint inclination angle (AAJI) in sagittal and coronal planes and reduction index (RI) in the surgical approach selection for atlantoaxial dislocation.

Methods

Retrospectively analyzed 87 cases (42 males and 45 females, 9-89 years) of atlantoaxial dislocation from January 2011 to November 2020. In addition, 40 individuals without atlantoaxial dislocation were selected as the control group. Imaging parameters were compared between the two groups. According to surgical methods, the experiment group was divided into two groups including Group A(release surgery group) and Group B (conventional operation group). The parameters were measured based on CT and x-ray. The relevant imaging parameters and clinical scores, including the AAJI in sagittal and coronal planes, the atlas-dens interval (ADI) before and after traction, the RI, and JOA scores were measured and analyzed.

Results

The sagittal and coronal atlantoaxial joint inclination angles(SAAJI and CAAJI) in the control group were 7.91 ± 0.42(L), 7.99 ± 0.39°(R), 12.92 ± 0.41°(L), 12.97 ± 0.37°(R), in A were 28.94 ± 1.46°(L), 28.57 ± 1.55°(R), 27.41 ± 1.29°(L), 27.84 ± 1.55°(R), and in B were 16.16 ± 0.95°(L), 16.80 ± 1.00°(R), 24.60 ± 0.84°(L), 24.92 ± 0.93°(R) respectively. Statistical analysis showed that there was a statistical difference in the SAAJI between the control group and the experiment group (P < 0.01), as well as between groups A and B (P < 0.01). The RI in groups A and B was 27.78 ± 1.46% and 48.60 ± 1.22% respectively, and there was also a significant difference between the two groups (P < 0.01). There was negative correlation between SAAJI and RI.

Conclusions

The SAAJI and RI can be used as objective imaging indexes to evaluate the reducibility of atlantoaxial dislocation. And these parameters could further guide the selection of surgery methods. When the RI is smaller than 48.60% and SAAJI is bigger than 28.94°, anterior release may be required.

Research on pharyngeal bacterial flora in transoral atlantoaxial operation and the postoperative follow-up study

Objectives

To study the changes of bacterial flora after a series of preoperative oral disinfection and the postoperative recovery of nerve function of patients with craniovertebral junction disorders who were treated with transoral approach operations.

Methods

This research analyzed 20 cases collected from October 2009 to May 2010. All these patients were with CVJ disorders, including 8 males and 12 females, aged 2 to 66 (38.1 on average), and they were all treated with transoral approach operations. The mucosa samples of the posterior pharyngeal wall were sent for bacteria culture. These samples were collected by sterile cotton swabs at four crucial points, including 3 days before operation/before gargling, 3 days after continuous gargling/after anesthesia intubation on the day of operation, after intraoperative cleaning and washing of the mouth, and after intraoperative iodophor immersion. The microflora was stained by means of smear and further counted after an investigation by microscope. The neural function of patients was evaluated by the ASIA classification and the JOA scores. All patients but two with posterior stabilization performed respectively underwent transoral atlantoaxial reduction plate (TARP) fixation consecutively in the same sitting. A regular reexamination of cervical vertebra with lateral and open mouth X-ray, CT and MRI was conducted after operation to evaluate the reduction of atlantoaxial dislocation, internal fixation position, bone graft fusion, inflammatory lesions and tumor recurrence.

Results

This bacteriological research showed that the mucosa of the posterior pharyngeal wall of all the patients was in a sterile state after a series of oral preoperative preparations and intraoperative iodophor disinfection, which was considered as type I incision. The bacterial culture results of the mucosa samples of the posterior pharyngeal wall collected at different time points showed significant differences (χ² = 42.762, P = 0.000). All the patients had improvement in ASIA, and their neural functions were improved to different levels after operation. There was a significant difference in JOA scores before and after operation (t = 8.677, P = 0.000). Postoperative imaging examination showed that the atlantoaxial screw position was good and firm, and the CVJ disorders were treated appropriately.

Conclusion

It is safe and effective to cut the posterior pharyngeal muscle layer and implant internal fixation by means of transoral approach.

Retropharyngeal Reduction Plate for Atlantoaxial Dislocation: A Cadaveric Test and Morphometric Trajectory Analysis

Objective

To evaluate the placement feasibility and safety of the newly designed retropharyngeal reduction plate by cadaveric test and to perform morphometric trajectory analysis.

Methods

The five cadaveric specimens with intact atlantoaxial joint were enrolled in this study. They were used for simulating the placement process and evaluating the placement feasibility of the retropharyngeal reduction plate. The atlantoaxial dislocation (AAD) of five cadaveric specimens were obtained by proper external force after dissecting ligaments. The retropharyngeal reduction plate was placed on atlantoaxial joint of cadaveric specimens. The X‐ray and three‐dimensional (3D) spiral CT were used for evaluating the placement safety of retropharyngeal reduction plate. The DICOM data was obtained after 3D spiral CT scanning for the morphometric trajectory analysis.

Results

The reduction plates were successfully placed on the atlantoaxial joint of five cadaveric specimens through the retropharyngeal approach, respectively. The X‐ray and 3D spiral CT showed the accurate screw implantation and satisfying plate placement. The length of the left/right atlas screw trajectory (L/RAT) was, respectively, 1.73 ± 0.01 cm (LAT) and 1.71 ± 0.02 cm (RAT). The length of odontoid screw trajectory (OST) was 1.38 ± 0.02 cm. The length of the left/right axis screw trajectory (L/RAXT) was, respectively, 1.67 ± 0.02 cm (LAXT) and 1.67 ± 0.01 cm (RAXT). There was no statistical significance between left side and right side in terms of AT and AXT (P > 0.05). The angles of atlas screw trajectory angle (ASTA), axis screw trajectory angle (AXSTA), and odontoid screw trajectory angle (OSTA) were 38.04° ± 2.03°, 56.92° ± 2.66°, and 34.78° ± 2.87°, respectively.

Conclusion

The cadaveric test showed that the retropharyngeal reduction plate is feasible to place on the atlantoaxial joint, which is also a safe treatment choice for atlantoaxial dislocation. The meticulous preoperative planning of screw trajectory based on individual differences was also vital to using this technique.