Investigation of the control of rotational alignment in the tibial component during total knee arthroplasty

Impact of implant positions in total knee arthroplasty on the postoperative knee kinematics of tibial rotation

Introduction

In total knee arthroplasty (TKA), the implant positions and knee kinematics, as well as the manifestation of medial pivot motion, play pivotal roles in determining postoperative clinical outcomes. The purpose of the current study was to analyze the correlation between knee kinematics, which was measured during TKA and implant positions derived using computed tomography (CT) examination after TKA.

Methods

This study comprised 64 patients (76 knees) who underwent primary TKA between 2015 and 2022. A navigation system was used in TKA procedures, and intraoperative knee kinematics were automatically calculated with it. Utilizing three-dimensional evaluation software, positioning of implants was quantified with CT images taken pre- and post-operatively. Multiple regression analyses were employed to explore the impact of femoral component position (FP) and tibial component position (TP) on knee kinematics, focusing on the extent of tibial rotational motion (TRM) during passive knee motion.

Results

FP affected TRM between knee extension and 90° flexion (p = 0.003, 95 % confidence interval [CI]: 0.315-1.384) and between knee extension and full flexion (p = 0.0002, 95 % CI: 0.654-1.844) after TKA. FP in internal rotation positively affected internal TRM after TKA. TP was not associated with TRM.

Conclusions

Findings of the current study suggest that FP in internal rotation positively impacts knee kinematics after TKA.

Relationship between the Femoral and Tibial Component Positions and Postoperative Knee Range of Motion after Posterior-Stabilized Total Knee Arthroplasty in Varus-Aligned Knees

This study aimed to evaluate the relationship between the femoral and tibial component positions and postoperative knee range of motion after posterior-stabilized total knee arthroplasty (TKA). Forty-four patients (48 knees in total: 9 men, 9 knees; 35 women, 39 knees) who underwent posterior-stabilized TKA using a navigation system were included. The femoral and tibial component positions were measured from the preoperative and postoperative computed tomography data with three-dimensional evaluation software. We investigated the relationship between the knee range of motion, including extension restriction and maximum flexion angles at 2 years postoperatively, and the femoral and tibial component positions. Patients with knee extension restriction of 10° or more at 2 years postoperatively showed greater posterior flexion position of the tibial component than those with knee extension restriction less than 10° (6.2° and 3.9°, respectively, p=0.018). The postoperative knee flexion angle was positively associated with the internal rotational position of the femoral component (p=0.032, 95% confidence interval: 0.105-2.178). Patients with a knee flexion angle more than 120° at 2 years postoperatively had greater internal rotational position of the femoral component than those with 120° or less (5.2° and 1.5°, respectively, p=0.002). In conclusions, after posterior-stabilized TKA, the postoperative knee extension restriction angle was associated with the posterior flexion position of the tibial component, and the knee flexion angle was positively related to the internal rotational position of the femoral component.

Research Advances in the Application of AI for Preoperative Measurements in Total Knee Arthroplasty

Total knee arthroplasty (TKA) is widely used in clinical practice as an effective treatment for end-stage knee joint lesions. It can effectively correct joint deformities, relieve painful symptoms, and improve joint function. The reconstruction of lower extremity joint lines and soft tissue balance are important factors related to the durability of the implant; therefore, it is especially important to measure the joint lines and associated angles before TKA. In this article, we review the technological progress in the preoperative measurement of TKA.

Finite element analysis of the tibial component alignment in a transverse plane in total knee arthroplasty

The research aims to analyze the tibial component rotation using the finite element method by resecting the tibia in a transverse plane at an angle between 1.5° (external rotation) and -1.5° (internal rotation). We used a three-dimensional scanner to obtain the tibia's geometrical model of a cadaveric specimen. We then exported the surfaces of the tibial geometrical model through the Computer-Aided Three-dimensional Interactive Application (CATIA), which is a Computer-Aided Design (CAD) program. The CAD program three-dimensionally shaped the tibial component, polyethylene, and cement. Our analysis determined that the maximum equivalent stress is obtained in the case of proximal tibial resection at -1.5° angle in a transverse plane (internal rotation) with a value of 12.75 MPa, which is also obtained for the polyethylene (7.693 MPa) and cement (6.6 MPa). The results have shown that detrimental effects begin to occur at -1.5°. We propose the use of this finite element method to simulate the positioning of the tibial component at different tibial resection angles to appreciate the optimal rotation.

Association of knee flexion angle after posterior-stabilized total knee arthroplasty with postoperative tibial external position relative to the femur and the extent of tibial internal rotation from knee extension to flexion

BACKGROUND

This study evaluated the relationship between preoperative and postoperative knee kinematics, moreover, investigated tibial rotational position and the extent of tibial internal rotation from knee extension to flexion as factors to obtain significant knee flexion after total knee arthroplasty (TKA).

METHODS

Fifty-four patients (60 knees total; 15 males, 16 knees; 39 females, 44 knees) who underwent posterior-stabilized TKA using a navigation system were included. Intraoperative knee kinematics involving tibial rotational position relative to the femur and the extent of tibial internal rotation were examined at two time points: 1) after landmarks registration (pre-TKA) and 2) after skin closure (post-TKA). The relationship between the knee flexion angle at one year postoperatively and intraoperative tibial rotational position, or the extent of tibial rotation among several knee flexion angles calculated with a navigation system were investigated.

RESULTS

The postoperative knee flexion angle was positively associated with the preoperative flexion angle and intraoperative knee kinematics at post-TKA involving tibial external position relative to the femur at knee extension and the extent of tibial internal rotation from extension to 90° of flexion or to maximum flexion. There was a positive relationship between the extent of tibial internal rotation at pre-TKA and that at post-TKA.

CONCLUSIONS

The intraoperative kinematics of the extent of tibial internal rotation at post-TKA was influenced by that at pre-TKA. The greater external position of the tibia relative to the femur at knee extension and the greater extent of tibial internal rotation at post-TKA might lead to good knee flexion angle.

Methods of intra- and post-operative determination of the position of the tibial component during total knee replacement

AIM OF THE STUDY

To identify the most reliable anatomical landmarks and imaging techniques for assessing the rotation of the tibial component in total knee arthroplasty (TKA).

METHODS

An extensive literature review (from January 2016 to March 2019) was performed. We included studies about primary TKA with details concerning the anatomical landmarks used for implanting the tibial component and also imaging studies assessing tibial component rotation. The final selection comprises only thirty-five articles consistent with the inclusion criteria.

RESULTS

Extra-articular landmarks are not always reliable (even though the tibial tubercle is one of the most popular extra-articular landmarks used to assess the rotation of the tibial component), mainly because they vary and can lead to malrotation of the tibial component. Akagi's line (an intra-articular landmark) is considered to be the most reliable and easy to find during surgery and likewise is not affected by articular deformities. The anterior tibial cortex (intra-articular landmark) also proved to be accurate and reliable with the main advantage being that is palpable after tibial resection. Radiography provides a good and inexpensive option for imaging, but it is insufficient. Magnetic resonance imaging (MRI) is used in some cases but not routinely for assessing TKA components or their orientation. Computed tomography (CT), used together with a well-defined protocol (Berger's method being the preferred choice), remains the "gold standard" for evaluating the rotation of the tibial component after TKA.

CONCLUSION

Currently, the most accurate and reliable anatomical landmarks are represented by Akagi's line and the anterior cortex of the tibia. Post-operatively, through CT and well-established protocols, the rotation of the tibial component can be accurately determined.