Sensitive voltammetric determination of rutin in pharmaceuticals, human serum, and traditional Chinese medicines using a glassy carbon electrode coated with graphene nanosheets, chitosan, and a poly(amido amine) dendrimer

Chitosan-Based Electrochemical Sensors for Pharmaceuticals and Clinical Applications

Chitosan (CTS), a biocompatible and multifunctional material derived from chitin, has caught researchers' attention in electrochemical detection due to its unique properties. This review paper provides a comprehensive overview of the recent progress and applications of CTS-based electrochemical sensors in the analysis of pharmaceutical products and other types of samples, with a particular focus on the detection of medicinal substances. The review covers studies and developments from 2003 to 2023, highlighting the remarkable properties of CTS, such as biocompatibility, chemical versatility, and large surface area, that make it an excellent candidate for sensor modification. Combining CTS with various nanomaterials significantly enhances the detection capabilities of electrochemical sensors. Various types of CTS-based sensors are analyzed, including those utilizing carbon nanomaterials, metallic nanoparticles, conducting polymers, and molecularly imprinted CTS. These sensors exhibit excellent sensitivity, selectivity, and stability, enabling the precise and reliable detection of medications. The manufacturing strategies used for the preparation of CTS-based sensors are described, the underlying detection mechanisms are elucidated, and the integration of CTS sensors with transducer systems is highlighted. The prospects of CTS-based electrochemical sensors are promising, with opportunities for miniaturization, simultaneous detection, and real-time monitoring applications.

Copper-Guanosine Nanorods (Cu-Guo NRs) as a Laccase Mimicking Nanozyme for Colorimetric Detection of Rutin

Inspired by laccase activity, herein, Cu-guanosine nanorods (Cu-Guo NRs) have been synthesized for the first time through a simple procedure. The activity of the Cu-Guo NR as the laccase mimicking nanozyme has been examined in the colorimetric sensing of rutin (Rtn) by a novel and simple spectrophotometric method. The distinct changes in the absorbance signal intensity of Rtn and a distinguished red shift under the optimum condition based on pH and ionic strength values confirmed the formation of the oxidized form of Rtn (o-quinone) via laccase-like nanozyme activity of Cu-Guo NRs. A vivid and concentration-dependent color variation from green to dark yellow led to the visual detection of Rtn in a broad concentration range from 770 nM to 54.46 µM with a limit of detection (LOD) of 114 nM. The proposed methodology was successfully applied for the fast tracing of Rtn in the presence of certain common interfering species and various complex samples such as propolis dry extract, human biofluids, and dietary supplement tablets, with satisfactory precision. The sensitivity and selectivity of the developed sensor, which are bonuses in addition to rapid, on-site, cost-effective, and naked-eye determination of Rtn, hold great promise to provide technical support for routine analysis in the real world.

A magnetic nanocomposite prepared from electrospun CoFe2O4 nanofibers and graphene oxide as a material for highly sensitive determination of rutin

A magnetic bar carbon paste electrode (MBCPE) modified with cobalt ferrite magnetic electrospun nanofibers (NFs) and graphene oxide (GO) is described for the electrochemical determination of rutin. The NFs were prepared by electrospinning using a solution that contains poly(vinyl pyrrolidone) (PVP) and Co(II) and Fe(III) nitrates as metal sources. Carbon paste was prepared by hand mixing GO, CoFe₂O₄ NFs and graphite. This paste was then packed into the end of a glass tube and a very small magnetic bar was inserted into the tube to be coated with the carbon paste to provide a magnetic field. The MBCPE was used to attract the magnetic nanofibers to the electrode surface. Cyclic voltammetry and differential pulse voltammetry techniques were used to study the electrochemical behavior of rutin on the modified MBCPE at pH 2.5. The electrocatalytic current, best measured at a potential of around 0.5 V (vs. Ag/AgCl), varies with the rutin concentration in two linear ranges, viz. from 0.001-0.1 nM and from 1.0-100 nM, with a 0.94 pM detection limit. The electrode was successfully applied to the determination of rutin in lemon, red apple, lime and orange juices. Graphical abstractSchematic representation of a modified magnetic bar carbon paste electrode for detection of rutin. To achieve the modified electrode, electrospun CoFe₂O₄ nanofibers, graphene oxide and a very small magnetic bar are packed into the end of a glass tube.

Nanomaterials: Electrochemical Properties and Application in Sensors

The unique properties of nanoparticles make them an extremely valuable modifying material, being used in electrochemical sensors. The features of nanoparticles affect the kinetics and thermodynamics of electrode processes of both nanoparticles and redox reactions occurring on their surface. The paper describes theoretical background and experimental studies of these processes. During the transition from macro- to micro- and nanostructures, the analytical characteristics of sensors modify. These features of metal nanoparticles are related to their size and energy effects, which affects the analytical characteristics of developed sensors. Modification of the macroelectrode with nanoparticles and other nanomaterials reduces the detection limit and improves the degree of sensitivity and selectivity of measurements. The use of nanoparticles as transducers, catalytic constituents, parts of electrochemical sensors for antioxidant detection, adsorbents, analyte transporters, and labels in electrochemical immunosensors and signal-generating elements is described.

Electrocomposite Developed with Chitosan and Ionic Liquids Using Screen-Printed Carbon Electrodes Useful to Detect Rutin in Tropical Fruits

This work reports the development of a composite of the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BP₄) and chitosan (CS) described in previous reports through a new method using cyclic voltammetry with 10 cycles at a scan rate of 50.0 mV s⁻¹. This method is different from usual methods such as casting, deposition, and constant potential, and it allows the development of an electroactive surface toward the oxidation of rutin by stripping voltammetry applied to the detection in tropical fruits such as orange, lemon, and agraz (Vaccinium meridionale Swartz), with results similar to those reported in previous studies. In addition, the surface was characterized by electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), and Raman spectroscopy. The limit of detection was 0.07 µmol L⁻¹ and the relative standard deviation (RSD) of 10 measurements using the same modified electrode was 0.86%. Moreover, the stability of the sensor was studied for six days using the same modified electrode, where the variation of the signal using a known concentration of rutin (RT) was found to be less than 5.0%. The method was validated using a urine chemistry control spiked with known amounts of RT and possible interference was studied using ten substances including organic and biological compounds, metal ions, and dyes. The results obtained in this study demonstrated that this electrodeveloped composite was sensitive, selective, and stable.

A sensitive electrochemical sensor based on ZIF-8–acetylene black–chitosan nanocomposites for rutin detection

Herein, we fabricated a sensitive rutin electrochemical sensor via modifying glassy carbon electrode (GCE) with zeolitic imidazolate framework-8 (ZIF-8) and acetylene black (AB) in the presence of chitosan (CS). The electrochemical activity and experimental parameters of the ZIF-8-AB-CS/GCE sensor were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Under the optimal conditions, the sensor presented a reasonable linear response in the range of 0.1–10 μM with a limit of detection (LOD) as low as 0.004 μM (S/N = 3). The sensor possessed good reproducibility and high stability, and was successfully applied to detect rutin tablet samples with satisfactory results, which was attributed to the synergistic effect between ZIF-8 and AB. Meanwhile, the sensor displayed a potential application for detection of other analytes in real samples. Furthermore, a probable interaction mechanism was proposed to account for the interaction between rutin and the nanocomposite electrode, which was not discussed in previous reports.

A sensitive ZIF-8-AB-CS/GCE for rutin detection is constructed and the interaction between them is discussed for the first time.

An electrochemical sensor for the sensitive detection of rutin based on a novel composite of activated silica gel and graphene

A novel sensor based on a silica gel–graphene composite for sensitive and selective detection of rutin.

Cyclodextrin polymer/Fe3O4 nanocomposites as solid phase extraction material coupled with UV-vis spectrometry for the analysis of rutin

In this paper, carboxymethyl-hydroxypropyl-β-cyclodextrin polymer modified magnetic particles Fe3O4 (CM-HP-β-CDCP-MNPs) were prepared and applied to magnetic solid phase extraction of rutin combined with UV-visible spectrometry detection. The synthesized magnetic particles were characterized by element analysis, Fourier transform infrared spectra, thermal gravimetric analysis, and transmission electron microscopy. Several variables affecting the extraction and desorption of rutin such as pH, the amount of adsorbent, the type and volume of eluent, extraction and desorption time, and temperature were investigated. The maximum adsorption capacity was 67.0 mg g(-1) for rutin with the equilibrium time of 30 min at room temperature, and the adsorbent could be reused for 10 times. A calibration curve was linear in the range of 0.05-8.00 μg mL(-1) with a relative standard deviation of 2.9% (n=5, c=4.0 μg mL(-1)). The limit of detection was 7.0 ng mL(-1). The interaction mechanism between the adsorbent and rutin was also studied. Feasibility of this method was validated by the analysis of rutin tablets and lotus plumule.

Voltammetric behavior of rutin at a boron-doped diamond electrode. Its electroanalytical determination in a pharmaceutical formulation

This paper examined for the first time, the possibilities of the usage of a boron-doped diamond electrode for the redox behavior of rutin using cyclic and adsorptive stripping voltammetry. The cyclic voltammograms showed a pair of redox peaks at lower potentials followed by an irreversible oxidation peak at higher positive potential. Using square-wave adsorptive stripping voltammetry, the compound yielded a well-defined voltammetric response in Britton-Robinson buffer, pH 4.0 at +0.48 V (vs. Ag/AgCl) (after 60 s accumulations at a fixed potential of 0.2 V). The calibration curve was linear in the concentration range from 0.01 µg mL−1 to 0.1 µg mL−1 (1.64×10−8 M − 1.64×10−7 M). A detection limit of 0.0017 µg mL−1 (2.78×10−9 M) was observed without any chemical modifications and electrochemical surface pretreatments. As an example, the practical applicability of boron-doped diamond electrode was tested with the measurement of rutin in dietary supplement products.

Application of hot platinum microelectrodes for determination of flavonoids in flow injection analysis and capillary electrophoresis

The determination of quercetin and rutin by flow injection analysis (FIA) and capillary electrophoresis (CE) using electrochemical detection was described. These flavonoids were determined at normal (unheated) and hot platinum microelectrodes using cyclic voltammetry. When quercetin or rutin is reaching the platinum electrode, a change of the current in the region of the platinum oxide formation is observed. Integration of the current changes in this in this region creates analytical signals in the form of peaks. An increase of temperature to about 76°C in a small zone adjacent to the microelectrode causes an increase of the analytical signal by more than 6 times under FIA conditions. This method enables the use of hot microelectrodes as detectors in HPLC or CE. In CE the improvement of the analytical signal at hot microelectrodes is smaller than in FIA and increase only 1.3-3.4 times. Heated microelectrodes were used for analysis of the flavonoids in natural samples of the plant (extract of sea buckthorn) and a pharmaceutical preparation (Cerutin).

Cyclic voltammetry of natural flavonoids on MWNT-modified electrode and their determination in pharmaceuticals

The determination of rutin, quercetin and taxifolin in pharmaceutical dosage forms using cyclic voltammetry on multi-walled carbon nanotube modified glassy carbon electrode (MWNT-GCE) has been developed. The surface of the electrode created has been characterized by atomic force microscopy. Electrode modification with MWNT increases the surface average roughness (190-fold) and structures it. There are two oxidation steps at 0.22 and 0.80, 0.23 and 0.80, 0.26 and 0.86 V on cyclic voltammograms of taxifolin, quercetin and rutin, respectively, in phosphate buffer solution of pH 7.4. The linear dynamic range is 1.4–28 and 28–210, 2.0–220 and 0.52–210 μM with detection limits of 0.71, 1.0 and 0.26 μM for rutin, quercetin and taxifolin, respectively. The relative standard deviation of flavonoids determination in pharmaceuticals does not exceed of 7%. The data obtained are in good agreement with coulometric determination.