Preconcentration of metal ions using microbacteria

Switchable metal extractant integrated miniaturized 3D-printed device: A semi-online multi-metal separation system for matrix-free ICP-MS analysis

BACKGROUND

This study tackles the critical challenges in metal analysis by presenting an innovative miniaturized metal extraction device prototype. This device features a functional nanocomposite (FNC) enhanced 3D-printed polylactic acid (PLA) metal extractant (FNC@3D PLA). The research is motivated by the constraints of traditional solid-phase extraction (SPE) methods, specifically their limitations in handling competitive metal ion environments and matrix interference during inductively coupled plasma mass spectrometry (ICP-MS) analysis. The designed prototype aims to overcome these challenges and enhance the extraction efficiency of diverse metals.

RESULTS

The FNC, designed to incorporate various functional groups critical for metal ion extraction efficiency, was meticulously engineered through the reaction of acid-treated and delaminated graphitic carbon nitride nanosheets (Thiol-gCN NSs) with 3-mercaptopropyl trimethoxysilane (MPTMS). The competitive metal ion extraction efficiency of FNC@3D PLA was demonstrated, showcasing notable limit of detection values of 3.2 ± 0.7 ng mL-1 and 8.57 ± 3.05 ng mL-1 for Cu and Ag, respectively. Furthermore, the miniaturized 3D-printed metal-preconcentration setup incorporating FNC@3D PLA exhibited favorable intraday relative standard deviation (RSD) percentage (%) values ranging from 1.23 to 8.6 for both Cu and Ag. Interday RSD % between 1.41 and 8.14 were observed under spiked real urine sample conditions. The sustainability and robustness of the proposed approach were underscored by substantial recovery % values exhibited by FNC@3D PLA, even after eight consecutive regeneration processes.

SIGNIFICANCE

This study significantly contributes to the advancement of analytical methodologies by providing a reliable and efficient platform for metal extraction and preconcentration in practical metal analysis applications. Developed FNC@3D PLA system demonstrates its potential to address the challenges associated with SPE in metal analysis, especially in complex sample matrices. We believe implications of this research can be extended to various fields, from environmental monitoring to clinical diagnostics, where accurate and reliable metal analysis is paramount.

How ICP-OES changed the face of trace element analysis: Review of the global application landscape

The 50th anniversary of Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES) will be observed in 2024. ICP-OES was first commercially available in 1974, and since then, it has become one of the most widely used analytical techniques in the world. ICP-OES is a powerful tool for the determination of trace and ultratrace elemental concentrations in a wide variety of samples specifically for multielement analysis. It is used in a wide range of applications, including environmental monitoring, food analysis, and medical diagnostics. This review aims to explore recent applications of ICP-OES in areas such as food analysis, microplastics, materials, dietary supplements, human tissue, and bodily fluids. The utilization of ICP-OES in these fields has ignited the interest of prospective ICP-OES users and inspired current practitioners, as the 50th anniversary approaches, it is of value of providing an updated review. It is important to note that this work does not seek to encompass a comprehensive review of ICP-OES, given the vast number of published results in this field. Undertaking such a comprehensive task would be a daunting challenge. Consequently, an overview of the ICP-OES instrumental technique is provided, followed by a highlighting of recent significant applications in the aforementioned fields.

A fungal functionalized magnetized solid phase extractor for preconcentrations of Pb(II), Mn(II), and Co(II) from real samples

Due to increasing industrialization and overpopulation, the amount of toxic metals is increasing in the environment, including air, soil, water, and food. Solid phase extraction is an efficient and ideal technique to preconcentrate the toxic metals before their measurements by analytical instruments. Russula brevipes was immobilized on γ-Fe₂O₃ magnetic nanoparticles and employed as a SPE sorbent to preconcentrate the trace level of Pb(II), Mn(II), and Co(II). To investigate the extraction conditions, significant experimental parameters were examined in details. LODs were calculated as 0.022, 0.015, and 0.024 ng mL^-1 for Pb(II), Mn(II), and Co(II), respectively. The biosorption capacities of R. brevipes immobilized γ-Fe₂O₃ were calculated as 43.1 mg g^-1 for Pb(II), 54.9 mg g^-1 for Mn(II), and 49.7 mg g^-1 for Co(II). Pb(II), Mn(II), and Co(II) in food samples at trace levels were preconcentrated by applying the developed method.

Adsorption performance of Enterobacter cloacae towards U(VI) ion and application of Enterobacter cloacae/carbon nanotubes to preconcentration and determination of low-levels of U(VI) in water samples

Keeping the high potential of some microorganisms in adsorption of radionuclides in view, the adsorption properties of Enterobacter cloacae towards uranium were attentively scrutinized, and then it was used for preconcentration of uranium in different samples, using Enterobacter cloacae/carbon nanotube composite. First, using ultrasonic agitation, the effects of operational factors on biosorption of uranium on the inactive Enterobacter cloacae were appraised and modeled by central composite design, and a comprehensive study was performed on the equilibrium, kinetics, thermodynamic, and selectivity aspects of biosorption. The optimization studies along with the evaluations of the adsorption properties revealed that Enterobacter cloacae have a high affinity for fast and selective biosorption of uranium ions, at pH 5.1. Second, the Enterobacter cloacae/carbon nanotube was synthesized, characterized, and utilized for preconcentration of uranium in different samples, using a mini-column packed with the composite. The optimization of operational factors on recovery of uranium, using the central composite design, showed that uranium can be quantitively adsorbed at a sample flow rate lower than 4.5 mL min^-1 and the desorption could be accomplished with 3.0 mL HCl 0.6 M solution. Finally, the mini-column was exploited for preconcentration and determination of uranium in different samples. The results revealed the low detection limit (0.015 μg.L^-1), high precision (RSDs ≤3.92%), and good accuracy of the proposed procedure.

Anoxybacillus flavithermus loaded ɣ-Fe2O3 magnetic nanoparticles as an efficient magnetic sorbent for the preconcentrations of Cu(II) and Mn(II)

It was hypothesized that -iron( oxide nanoparticles (ɣ-Fe₂O₃ NPs) functionalized with Anoxybacillus flavithermus (A. flavithermus) as an effective magnetic sorbent for the preconcentrations of toxic metal ions. It is clear to conclude that the main novelty of this study is that ɣ-Fe₂O₃ NPs loaded with A. flavithermus is selective-specific for Cu(II), Mn(II). Structural functional groups of the samples were elucidated by FTIR, and SEM. Significant experimental parameters were investigated in detail. 0.2 mL min^-1 of flow rate, 5 mL of 1 M of hydrochloric acid as eluent, 150 mg biogenic mass sample, and 150 mg ɣ-Fe₂O₃ NPs for supporting material were found as the best conditions. This developed method has been tested and verified using certified and standard reference materials. As a result of the studies, the pre-concentration factor of the Cu(II), Mn(II) metals was calculated as 40. All measurements showed that the developed solid-phase extraction (SPE) columns are available for 32 cycles. The use of ɣ-Fe₂O₃ NPs equipped with A. flavithermus as an effective magnetic sorbent for the first measurements of ions was thoroughly studied. In order of the biosorption capacities were calculated as 26.0, and 30.3 mg/g for Cu(II), Mn(II), respectively. The developed method for specifying the samples showed excellent to excellent results.

Extraction and preconcentration of Ni(ii), Pb(ii), and Cd(ii) ions using a nanocomposite of the type Fe3O4@SiO2@polypyrrole-polyaniline

In this study, the application of Fe₃O₄@SiO₂@polypyrrole-polyaniline magnetic nanocomposite was studied for Ni(ii), Cd(ii), and Pb(ii) ions preconcentration extraction. In this regard, the silica layer prevents the Fe₃O₄ nanoparticles (NPs) from aggregating over a broad pH range value and simultaneously improves chemical stability and hydrophilicity. By using a Box-Behnken design, the effect of various parameters affecting the preconcentration was studied. FAAS was employed to quantify the eluted analytes. The detection limits are 0.09, 1.1, and 0.3 ng mL^-1 for Ni(ii), Cd(ii) and Pb(ii), ions, respectively. The relative standard deviations (RSDs%) were calculated for determining the method's precision, lower than 7.5%. The capacities of sorption are 75, 84, and 98 mg g^-1, respectively. With the usage of a certified reference material, the developed method was validated. After that, the validated method was employed to rapidly extract trace target ions from food samples and gave satisfactory results.

Preconcentrations of Cu (II) and Mn (II) by magnetic solid-phase extraction on Bacillus cereus loaded γ-Fe2O3 nanomaterials

For the simultaneous preconcentrations of Cu(II) and Mn(II), a novel preconcentration technique was developed and described. Bacillus cereus loaded magnetic ɣ-Fe₂O₃ nanoparticles were prepared and used as support materials on solid-phase extraction procedure. Important experimental parameters were investigated in details and pH 6.0, 3 mL min^-1 of flow rate, 5 mL of 1 mol L^-1 of HCl as eluent, 200 mg of biomass, and 200 mg of magnetic ɣ-Fe₂O₃ nanoparticles as support material was found as the best conditions. The preconcentrations factor were found to be 80 for Cu (II) and Mn(II). It was confirmed by the results that SPE columns could be used in 32 cycles. The LOD values calculated for Cu (II) and Mn (II) were 0.09 and 0.08 ng mL^-1, respectively. The RSD values found were less than 3.4%. The extraction recoveries were achieved as higher than 98%. The biosorption capacities of Cu (II), and Mn (II) were 26.0 mg g^-1, 30.3 mg g^-1 respectively. The approach devised for analyzing analyte concentrations in food samples proved to be successful.

A novel bio-solid phase extractor for preconcentrations of Hg and Sn in food samples

An ecofriendly preconcentration method was developed based on the use of Geobacillus galactosidasius sp. nov immobilized on Amberlite XAD-4 as an adsorbent for the preconcentrations of Hg and Sn. SEM-EDX performed for the investigation of surface functionality and morphology. The detailed investigations of factors such as pH of the solution, flow rate, interfering ions and sample volume have been thanks to the optimization of the pre-concentration system. The optimum pHs were found as 5.0-7.0 for Hg and Sn and also the optimum flow rates were determined as 2 mL min^-1 for recovery of Hg and Sn. Under the best experimental conditions, limits of detections (LOD) were found as 0.53 ng mL^-1 for Hg and 0.27 ng mL^-1 for Sn. RSDs were calculated as 8.2% for Hg and 6.9% for Sn. The process was validated to use certified references (fish samples). ICP-OES was used to measure the levels of Hg and Sn in various real meal patterns after the devised technique was used. Concentrations of Hg and Sn were quantitively measured on gluten-free biscuit, flour, rice, Tuna fish, meat, chicken meat, potato, chocolate, coffee, tap water, energy drink and mineral water samples with low RSD. The developed method emerges as an innovative technology that will eliminate the low cost and toxic effect.

Polymeric Biomass Derived Adsorbents for Co(II) Remediation, Recycling and Analysis

The gradual replacement of conventional materials with materials tailored to the green development goals is one of the needs of the day. Correspondingly, this article reviews and integrates, for the first time, the gathered knowledge on the use of the adsorbents based on polymeric biomasses (biosorbents) for a cleaner separation of cobalt (Co) from synthetic and actual solutions. It is a two-part comprehensive approach that debates the Co biosorption potential of bio-based polymers from the perspective of their virtual and real applications for decontamination, recovery, and analytical purposes. First, the removal performances of these materials to batch and fixed column biosorption of Co(II) from mono-component and multi-metallic laboratory solutions are systematized and discussed. Following that, the focus of the first part is shifted to the analytical capabilities of the biosorbents proposed for Co(II) quantification from synthetic solutions. The second section considers the polymeric biomasses successfully incorporated in practical strategies for the removal and recovery of Co(II) from real solutions. The opportunities provided by the use of biosorbents for the development of accurate and greener procedures in Co(II) analysis are also highlighted. The directions in which the research on this topic should be continued and strengthened are suggested.

Study on the aerobic remediation of Ni(II) by Pseudomonas hibiscicola strain L1 interaction with nitrate

Aerobic denitrifying bacteria have the potential to remove the co-pollutants Ni(II) and nitrate in industrial wastewater. In this study, aerobic denitrifying bacteria with significant Ni(II) removal efficiency was isolated from the biological reaction tank and named as Pseudomonas hibiscicola L1 strain after 16 S rRNA identification analysis. The removal of ever-increasing Ni(II) and NO₃^--N wastewater under aerobic conditions by strain L1 was discussed. The experimental results showed that strain L1 removed 84% of Ni(II) and 81% of COD, with the use of 34.8 mg L^-1 of nitrogen source and without nitrite accumulation yet. Strain L1 had remarkable activity (OD₆₀₀ = 0.51-0.56 (p < 0.05)) at 20 mg L^-1 of Ni(II) and 100 mg L^-1 of NO₃^--N. It was found that high Ni(II) gradients (2-10 mg L^-1) had little effect on nitrate removal ratio (35-34% (p > 0.05), and the removal ratios of Ni(II) was enhanced (from 42% to 83% (p < 0.05)) by increasing nitrate (25-100 mg L^-1). Also, the results indicated that strain L1 could reduce Ni(II) and nitrate under different pH (6-9); electron donor-glucose, sodium acetate, sodium succinate and trisodium citrate; C/N (5-20) and coexisting ions (Cu(II) and Zn(II)). Notably, the nitrogen balance analysis showed 32.4% of TN was lost nitrogen and 19.7% of TN was assimilated for cell growth, which indicated aerobic denitrification process of strain L1. Meanwhile, characterization technology (SEM, FTIR, and XRD) showed Ni(II) was bioadsorbed in the form of Ni(NH₂)₂, NiCO₃, and Ni(OH)₂·2H₂O through surface functional groups. This research provides new microbial method for the simultaneous removal of nitrate and Ni(II) in wastewater.

A new method for the preconcentrations of U(VI) and Th(IV) by magnetized thermophilic bacteria as a novel biosorbent

This paper proposes the use of Anoxybacillus flavithermus SO-15 immobilized on iron oxide nanoparticles (NPs) as a novel magnetized biosorbent for the preconcentrations of uranium (U) and thorium (Th). The SPE procedure was based on biosorption of U(VI) and Th(IV) on a column of iron oxide NPs loaded with dead and dried thermophilic bacterial biomass prior to U(VI) and Th(IV) measurements by ICP-OES. The biosorbent characteristicswere explored using FT-IR, SEM, and EDX. Significant operational factors such as solution pH, volume and flow rate of the sample solution, amounts of dead bacteria and iron oxide nanoparticles, matrix interference effect, eluent type, and repeating use of the biosorbent on process yield were studied. The biosorption capacities were found as 62.7 and 56.4 mg g^-1 for U(VI) and Th(IV), respectively. The novel extraction process has been successfullyapplied to the tap, river, and lake water samples for preconcentrations of U(VI) and Th(IV).

Preconcentrations of Ni(II) and Pb(II) from water and food samples by solid-phase extraction using Pleurotus ostreatus immobilized iron oxide nanoparticles

The present study explores the biosorption potential of Pleurotus ostreatus immobilized magnetic iron oxide nanoparticles for solid-phase extractions of Ni(II) and Pb(II) ions from the water and food samples. It was characterized using FTIR, FE-SEM/EDX before and after analyte ions biosorption. Important operational parameters including the effect of initial pH, the flow rate of the sample solution and volume, amount of biomass and support material, interfering ions, best eluent, column reusability were studied. The biosorption capacities of fungus immobilized iron oxide nanoparticles were found as 28.6 and 32.1 mg g^-1 for Ni(II) and Pb(II), respectively. The limit of detection (LOD) and limit of quantitation (LOQ) were achieved as 0.019 and 0.062 ng mL^-1 for Ni(II), 0.041 and 0.14 ng mL^-1 for Pb(II), respectively. The proposed method was validated by applying to certified reference materials and successfully applied for the preconcentrations of Ni(II) and Pb(II) ions from water and food samples by ICP-OES.

Immobilization of Pseudomonas aeruginosa static biomass on eggshell powder for on-line preconcentration and determination of Cr (VI)

In the present work, a novel continuous flow system (CFS) is developed for the preconcentration and determination of Cr (VI) usingPseudomonas aeruginosastatic biomass immobilized onto an effective and low-cost solid support of powdered eggshells. A mini glass column packed with the immobilized biosorbent is incorporated in a CFS for the preconcentration and determination of Cr (VI) from aqueous solutions. The method is based on preconcentration, washing and elution steps followed by colorimetric detection with 1,5-diphenyl carbazide in sulphuric acid. The effects of several variables such as pH, retention time, flow rate, eluent concentration and loaded volume are studied. Under optimal conditions, the CFS method has a linear range between 10 and 100 μg L-1and a detection limit of 6.25 μg L-1for the determination of Cr (VI). The sampling frequency is 10 samples per hour with a preconcentration time of 5 mins. Furthermore, after washing with a 0.1 M buffer (pH 3.0), the activity of the biosorbent is regenerated and remained comparable for more than 200 cycles. Scanning electron microscopy reveals a successful immobilization of biomass on eggshells powder and precipitation of Cr (VI) on the bacterial cell surface. The proposed method proves highly sensitive and could be suitable for the determination of Cr (VI) at an ultra-trace level.

A new magnetized thermophilic bacteria to preconcentrate uranium and thorium from environmental samples through magnetic solid-phase extraction

A magnetic solid-phase extraction (MSPE) method was developed for simultaneous preconcentrations of U(VI) and Th(IV) before their measurements by inductively coupled plasma optical emission spectrometry (ICP-OES). The main idea of this biotechnological application depends on the use of bacteria, thermophilic Bacillus cereus SO-14, as a solid-phase biosorbent. It was immobilized to γ-Fe₂O₃ magnetic nanoparticles and used for MSPE. Characterization of the biosorbent was performed using the scanning electron microscope (SEM), the energy dispersive X-ray (EDX) and Fourier transform infrared (FT-IR) spectroscopy. Also, the the best conditions of experimental parameters were examined, and the reliability of the method developed was verified by applying the certified reference materials. Limit of detections (LODs) of the U(VI) and Th(IV) was calculated as 0.008 and 0.013 ng mL^-1 respectively. Relative standard deviations (RSDs) were found to be 1.6 and 2.4 %, respectively, for U(VI) and Th(IV). R² was also calculated as 0.9991. Preconcentration factors were achieved as 100 for both elements. It should be highlighted that LODs were critically improved and the sensitivity of ICP-OES was enhanced.

A magnetized fungal solid-phase extractor for the preconcentrations of uranium(VI) and thorium(IV) before their quantitation by ICP-OES

The fungus Bovista plumbea immobilized on γ-Fe₂O₃ nanoparticles is shown to be a novel sorbent for magnetic solid-phase extractions of U(VI) and Th(IV). The biosorbent was characterized by FT-IR, SEM, and EDX. The effects of pH value, flow rate and volume of sample, amounts of biomass and support material, eluent type, foreign ions and repeated use of the sorbent on extraction efficiency were investigated. The sorption capacities are 41 and 44 mg g^-1, respectively, for U(VI) and Th(IV). The results indicated that B. plumbea immobilized onto γ-Fe₂O₃ nanoparticles can be utilized as a novel material for the preconcentrations of U(VI) and Th(IV) in certified materials and in spiked tap, river and lake waters. Graphical abstract Schematic presentation of a method for preconcentrations of Th(IV) and U(VI) ions using γ-Fe₂O₃ nanoparticles loaded with the fungus Bovista plumbea.

Responses exhibited by various microbial groups relevant to uranium exposure

There is a strong interest in knowing how various microbial systems respond to the presence of uranium (U), largely in the context of bioremediation. There is no known biological role for uranium so far. Uranium is naturally present in rocks and minerals. The insoluble nature of the U(IV) minerals keeps uranium firmly bound in the earth's crust minimizing its bioavailability. However, anthropogenic nuclear reaction processes over the last few decades have resulted in introduction of uranium into the environment in soluble and toxic forms. Microbes adsorb, accumulate, reduce, oxidize, possibly respire, mineralize and precipitate uranium. This review focuses on the microbial responses to uranium exposure which allows the alteration of the forms and concentrations of uranium within the cell and in the local environment. Detailed information on the three major bioprocesses namely, biosorption, bioprecipitation and bioreduction exhibited by the microbes belonging to various groups and subgroups of bacteria, fungi and algae is provided in this review elucidating their intrinsic and engineered abilities for uranium removal. The survey also highlights the instances of the field trials undertaken for in situ uranium bioremediation. Advances in genomics and proteomics approaches providing the information on the regulatory and physiologically important determinants in the microbes in response to uranium challenge have been catalogued here. Recent developments in metagenomics and metaproteomics indicating the ecologically relevant traits required for the adaptation and survival of environmental microbes residing in uranium contaminated sites are also included. A comprehensive understanding of the microbial responses to uranium can facilitate the development of in situ U bioremediation strategies.

Boletus edulis loaded with γ-Fe2O3 nanoparticles as a magnetic sorbent for preconcentration of Co(II) and Sn(II) prior to their determination by ICP-OES

The authors show that the fungus Boletus edulis loaded with γ-Fe₂O₃ nanoparticles is a viable sorbent for magnetic solid phase extraction of trace levels of Co(II) and Sn(II). The surface structure of immobilized magnetized B. edulis was characterized by FT-IR, SEM and EDX. Experimental parameters were optimized. Following elution with 1 M HCl, the ions were quantified by ICP-OES. The limits of detection are 21 pg·mL^-1 for Co(II), and 19 pg·mL^-1 for Sn(II). The preconcentration factors are 100 for both ions. The sorption capacities of the sorbent are 35.8 mg·g^-1 for Co(II) and 29.6 mg·g^-1 for Sn(II). The method was applied to the analysis of certificated reference materials and gave ≥95% recoveries with low RSDs. It was also successfully applied to the quantification of Co(II) and Sn(II) in spiked environmental and food samples. Graphical abstract The fungus Boletus edulis loaded with γ-Fe₂O₃ nanoparticles is a viable biosorbent for magnetic solid phase extraction (MSPE) of trace levels of Co(II) and Sn(II). The surface structure of immobilized magnetized B. edulis was characterized by FT-IR, SEM and EDX. Experimental parameters were optimized.

Resistance, bioaccumulation and solid phase extraction of uranium (VI) by Bacillus vallismortis and its UV-vis spectrophotometric determination

Bioaccumulation, resistance and preconcentration of uranium(VI) by thermotolerant Bacillus vallismortis were investigated in details. The minimum inhibition concentration of (MIC) value of U(VI) was found as 85 mg/L and 15 mg/L in liquid and solid medium, respectively. Furthermore, the effect of various U(VI) concentrations on the growth of bacteria and bioaccumulation on B. vallismortis was examined in the liquid culture media. The growth was not significantly affected in the presence of 1.0, 2.5 and 5.0 mg/L U(VI) up to 72 h. The highest bioaccumulation value at 1 mg/L U(VI) concentration was detected at the 72nd hour (10 mg/g metal/dry bacteria), while the maximum bioaccumulation value at 5 mg/L U(VI) concentration was determined at the 48th hour (50 mg metal/dry bacteria). In addition to these, various concentration of U(VI) on α-amylase production was studied. The α-amylase activities at 0, 1, 2.5 and 5 mg/L U(VI) were found as 3313.2, 3845.2, 3687.1 and 3060.8 U/mg, respectively at 48th. Besides, uranium (VI) ions were preconcentrated with immobilized B. vallismortis onto multiwalled carbon nanotube (MWCNT) and were determined by UV-vis spectrophotometry. The surface macro structure and functionalities of B. vallismortis immobilized onto multiwalled carbon nanotube with and without U(VI) were examined by FT-IR and SEM. The optimum pH and flow rate for the biosorption of U(VI) were 4.0-5.0 and 1.0 mL/min, respectively. The quantitative elution occurred with 5.0 mL of 1 mol/L HCl. The loading capacity of immobilized B. vallismortis was determined as 23.6 mg/g. The certified reference sample was employed for the validation of developed solid phase extraction method. The new validated method was applied to the determination of U(VI) in water samples from Van Lake-Turkey.

Tolerance and bioaccumulation of U(VI) by Bacillus mojavensis and its solid phase preconcentration by Bacillus mojavensis immobilized multiwalled carbon nanotube

In this study, uranium(VI) tolerance and bioaccumulation were investigated by using thermo -tolerant Bacillus mojavensis. The level of U(VI) was measured by UV-VIS spectrophotometry. The minimum inhibition concentration (MIC) value of U(VI) was experimented. Bacterial growth was not affected in the presence of 1.0 and 2.5 mg/L U(VI) at 36 h and the growth was partially affected in the presence of 5 mg/L U(VI) at 24 h. What was obtained from this study is that there was diversity in the various periods of the growth phases of metal bioaccumulation capacity, which was shown by B. mojavensis. The maximum bioaccumulation capacities were found to be 12.8, 22.7, and 48.2 mg/g dried bacteria, at 24th hours at concentration of 1.0, 2.5 and 5 mg/L U(VI), respectively. In addition to these, U(VI) has been preconcentrated on B. mojavensis immobilized MWCNT. Several factors such as pH, flow rate of solution, amount of biosorbent and support materials, eluent type, concentration and volume, the matrix interference effect on retention have been studied, and extraction conditions were optimized. Preconcentration factor was achieved as 60. Under the optimized conditions, the limit of detection (LOD) and quantification (LOQ) were calculated as 0.74 and 2.47 μg/L. The biosorption capacity of immobilized B. mojavensis was calculated for U(VI) as 25.8 mg/g. The results demonstrated that the immobilized biosorbent column could be reused at least 30 cycles of biosorption and desorption with the higher than 95% recovery. FT-IR and SEM analysis were performed to understand the surface properties of B. mojavensis.

Thermophilic Geobacillus galactosidasius sp. nov. loaded γ-Fe2O3 magnetic nanoparticle for the preconcentrations of Pb and Cd

Thermophilic bacteria, Geobacillus galactosidasius sp nov. was loaded on γ-Fe2O3 magnetic nanoparticle for the preconcentrations of Pb and Cd by solid phase extraction before ICP-OES. pH and flow rate of the solution, amounts of biosorbent and magnetic nanoparticle, volume of sample solution, effects of the possible interferic ions were investigated in details. Linear calibration curves were constructed in the concentration ranges of 1.0-60ngmL(-1) for Pb and Cd. The RSDs of the method were lower than 2.8% for Pb and 3.8% for Cd. Certified and standard reference samples of fortified water, wastewater, poplar leaves, and simulated fresh water were used to accurate the method. LOD values were found as 0.07 and 0.06ngmL(-1) respectively for Pb and Cd. The biosorption capacities were found as 34.3mgg(-1) for Pb and 37.1mgg(-1) for Cd. Pb and Cd concentrations in foods were determined. Surface microstructure was investigated by SEM-EDX.

An integrated system for field analysis of Cd(ii) and Pb(ii) via preconcentration using nano-TiO2/cellulose paper composite and subsequent detection with a portable X-ray fluorescence spectrometer

An integrative field analytical system was developed for the determination of Pb(ii) and Cd(ii).