Homogeneous immunoassay for the cancer marker alpha-fetoprotein using single wavelength excitation fluorescence cross-correlation spectroscopy and CdSe/ZnS quantum dots and fluorescent dyes as labels

In situ growth of electroactive polymers via ATRP to construct a biosensing interface for tumor marker

A novel biosensing interface for tumor markers was designed based on the atom transfer radical polymerization (ATRP) of poly(isopropenylphenol) (PPPL) in situ initiated by the fixing of p-chloromethyl benzoic acid on the surface of amino-modified electrodes. It was found that the electrochemical activity of PPPL itself can provide sufficient signals for these biosensors, which can avoid signal leakage and streamline the interface modification process. Cu(II) ions absorbed on the carbon spheres and then were released via acid stimulation to act as a catalyst to participate in the interface polymerization with ATRP. As the concentration of targets increased, more Cu(II) ions were released, and the electrochemical signal of polymers was enhanced. Therefore, the sensitive detection of carbohydrate antigen 19-9 (CA19-9) as a model target was achieved, with an ultralow limit of detection of 39 µU mL^-1 and wide detection range from 100 µU mL^-1 to 100 U mL^-1 under optimal conditions. Furthermore, this method achieved satisfying performance in human blood serum with good inter-assay precision (RSD < 6%) and satisfactory recovery of ~ 99-105%. According to the results, this work is of great significance for constructing biosensor interfaces via in situ polymerization. A novel biosensing interface for tumor marker was designed based on atom transfer radical polymerization (ATRP), which poly(isopropenylphenol) with electrochemical signal was fabricated in situ on electrode.

Advances in Optical Single-Molecule Detection: En Route to Supersensitive Bioaffinity Assays

The ability to detect low concentrations of analytes and in particular low-abundance biomarkers is of fundamental importance, e.g., for early-stage disease diagnosis. The prospect of reaching the ultimate limit of detection has driven the development of single-molecule bioaffinity assays. While many review articles have highlighted the potentials of single-molecule technologies for analytical and diagnostic applications, these technologies are not as widespread in real-world applications as one should expect. This Review provides a theoretical background on single-molecule-or better digital-assays to critically assess their potential compared to traditional analog assays. Selected examples from the literature include bioaffinity assays for the detection of biomolecules such as proteins, nucleic acids, and viruses. The structure of the Review highlights the versatility of optical single-molecule labeling techniques, including enzymatic amplification, molecular labels, and innovative nanomaterials.

Microfluidic chip electrophoresis for simultaneous fluorometric aptasensing of alpha-fetoprotein, carbohydrate antigen 125 and carcinoembryonic antigen by applying a catalytic hairpin assembly

An aptamer based assay is presented that is making use of a catalytic hybrid assembly and a microfluidic chip electrophoresis format. It enables simultaneous determination of the biomarkers (BMs) α-fetoprotein (AFP), carbohydrate antigen 125 (CA125), and carcinoembryonic antigen (CEA). The respective aptamers were covalently bound to Fe₃O₄@AuNPs (AuMPs) magnetic beads and then used to capture the biomarkers on their surface. Different single-stranded DNA primers were then labeled with various antibodies as encoding and signaling tags. The signal tags reacted with AuMPs-BMs to form different antibody-BM-aptamer complexes. After magnetic separation, three pairs of hairpins as substrates were introduced to trigger catalytic hybrid assembly by the primers in the complex. This will form many duplex DNA products of different length in the supernatant. The products can be magnetically separated by microfluidic chip electrophoresis and determined by fluorometry at excitation/emission wavelengths of 495/525 nm. Several experimental conditions including the hairpin concentration, reaction time and temperature were systemically optimized. The method can simultaneously quantify AFP, CEA and CA125, respectively, with detection limits of 0.1, 0.2, 0.15 pg mL^-1 (at S/N = 3). The aptamer functionalized magnetic beads can be reused for at least 20 times with a recovery of up to 80% after heat treatment. The method was employed to simultaneously detect the three BMs in serum samples. Graphical abstract Schematic presentation of the microfluidic chip electrophoresis and antibody-aptamer based multianalysis method for simultaneous detection of alpha-fetoprotein (AFP), carbohydrate antigen 125 (CA125) and carcinoembryonic antigen (CEA).

Metal coordination polymer induced perylene probe excimer fluorescence and its application in acetylcholinesterase sensing and alpha-fetoprotein immunoassay

Perylene probe excimer fluorescence based acetylcholinesterase sensing and alpha-fetoprotein immunoassay.

A Single-Molecule Homogeneous Immunoassay by Counting Spatially "Overlapping" Two-Color Quantum Dots with Wide-Field Fluorescence Microscopy

We developed a single-molecule homogeneous immunoassay by counting spatially "overlapping" two-color quantum dots (QD) under a wide-field fluorescence microscope. QD 655 with red fluorescence and QD 565 with green fluorescence were modified with capture and detection antibodies, respectively. A capture antibody-modified QD 655 and a detection antibody-modified QD 565 were conjugated by a corresponding antigen molecule to form a "sandwich" immunocomplex. The conjugated QD 655 could not be distinguished from the conjugated QD 565 by fluorescent microscopy because the distance between them was smaller than the resolution of an optical microscope (approximately 200 nm). The immunocomplex color became yellow because of the spatial "overlap" of the red and green fluorescence. The number of the yellow spots was equal to the number of immunocomplex molecules, while the concentration of the antigen was related to the ratio of the yellow dots to the red dots. The successful quantification of two model proteins in the human plasma, namely, alpha-fetoprotein and carcinoembryonic antigen, demonstrated the accuracy and reliability of our approach.

Fluorescence and Scattering Light Cross Correlation Spectroscopy and Its Applications in Homogeneous Immunoassay

In this work, we propose fluorescence and scattering light cross-correlation spectroscopy (FSCCS) based on laser confocal configuration using silver nanoparticle (SNPs) and Alexa Fluor 488 (Alexa) as probe pairs. FSCCS is a single molecule (particle) method, and its principle is similar to that of fluorescence cross-correlation spectroscopy (FCCS). We established the setup of FSCCS using single wavelength laser and developed an immunoassay model of FSCCS. The reliability and adaptability of FSCCS method were evaluated by homogeneous sandwich immunoassay mode. In the study, liver cancer biomarker alpha-fetoprotein (AFP) was used as an assay model, two different antibodies were labeled with SNPs and fluorophore Alexa Fluor 488, respectively. In the optimal conditions, the linear range of AFP covers 5 pM to 580 pM and the detection limit is 3.1 pM. This method was successfully applied for direct determination of AFP levels in human serum samples, and the obtained results were in good agreement with data obtained via ELISAs. The advantage of this method lies in its simplicity, attractive SNPs probes, high sensitivity and selectivity and high efficiency. We believe that FSCCS method exhibits promising potential applications in homogeneous bioassays and study on the molecular interaction and nanoparticle-molecule interaction.

A study of the dynamics of PTEN proteins in living cells using in vivo fluorescence correlation spectroscopy

PTEN (phosphatase and tensin homolog on chromosome 10) is one of the most important tumor-suppressor proteins, which plays a key role in negative regulation of the PI3K/AKT pathway, and governs many cellular processes including growth, proliferation, survival and migration. The dynamics of PTEN proteins in single living cells is as yet unclear owing to a shortage of suitable in vivo approaches. Here, we report a single-molecule method for in vivo study of the dynamics of PTEN proteins in living cells using fluorescence correlation spectroscopy (FCS). First, we established a monoclonal H1299 stable cell line expressing enhanced green fluorescent protein (EGFP) and PTEN (EGFP-PTEN) fusion proteins; we then developed an in vivo FCS method to study the dynamics of EGFP-PTEN both in the nucleus and the cytoplasm. We investigated the diffusion behaviors of EGFP and EGFP-PTEN in solution, nucleus and cytosol, and observed that the motion of PTEN in living cells was restricted compared with EGFP. Finally, we investigated the protein dynamics in living cells under oxidative stress stimulation and a cellular ATP depletion treatment. Under oxidative stress stimulation, the EGFP-PTEN concentration increased in the nucleus, but slightly decreased in the cytoplasm. The diffusion coefficient and alpha value of EGFP-PTEN reduced significantly both in the nucleus and cytoplasm; the significantly decreased alpha parameter indicates a more restricted Brownian diffusion behavior. Under the cellular ATP depletion treatment, the concentration of EGFP-PTEN remained unchanged in the nucleus and decreased significantly in cytosol. The diffusion coefficient of EGFP-PTEN decreased significantly in cytosol, but showed no significant change in the nucleus; the alpha value decreased significantly in both the nucleus and cytoplasm. These results suggest that the concentration and mobility of PTEN in the nucleus and cytoplasm can be regulated by stimulation methods. Our approach provides a unique method for real-time monitoring of protein dynamics in different subcellular compartments under different stimulation treatments.

Homogeneous Biosensing Based on Magnetic Particle Labels

The growing availability of biomarker panels for molecular diagnostics is leading to an increasing need for fast and sensitive biosensing technologies that are applicable to point-of-care testing. In that regard, homogeneous measurement principles are especially relevant as they usually do not require extensive sample preparation procedures, thus reducing the total analysis time and maximizing ease-of-use. In this review, we focus on homogeneous biosensors for the in vitro detection of biomarkers. Within this broad range of biosensors, we concentrate on methods that apply magnetic particle labels. The advantage of such methods lies in the added possibility to manipulate the particle labels by applied magnetic fields, which can be exploited, for example, to decrease incubation times or to enhance the signal-to-noise-ratio of the measurement signal by applying frequency-selective detection. In our review, we discriminate the corresponding methods based on the nature of the acquired measurement signal, which can either be based on magnetic or optical detection. The underlying measurement principles of the different techniques are discussed, and biosensing examples for all techniques are reported, thereby demonstrating the broad applicability of homogeneous in vitro biosensing based on magnetic particle label actuation.