Nanoparticle assisted laser desorption/ionization mass spectrometry for small molecule analytes

Metabolic profiling of bacteria with the application of polypyrrole-MOF SPME fibers and plasmonic nanostructured LDI-MS substrates

Here we present application of innovative lab-made analytical devices such as plasmonic silver nanostructured substrates and polypyrrole-MOF solid-phase microextraction fibers for metabolic profiling of bacteria. For the first time, comprehensive metabolic profiling of both volatile and non-volatile low-molecular weight compounds in eight bacterial strains was carried out with utilization of lab-made devices. Profiles of low molecular weight metabolites were analyzed for similarities and differences using principal component analysis, hierarchical cluster analysis and random forest algorithm. The results showed clear differentiation between Gram positive (G+) and Gram negative (G-) species which were identified as distinct clusters according to their volatile metabolites. In case of non-volatile metabolites, differentiation between G+ and G- species and clustering for all eight species were observed for the chloroform fraction of the Bligh & Dyer extract, while methanolic fraction failed to recover specific ions in the profile. Furthermore, the results showed correlation between volatile and non-volatile metabolites, which suggests that lab-made devices presented in the current study might be complementary and therefore, useful for species differentiation and gaining insights into bacterial metabolic pathways.

Aptamer-Based Targeting of Cancer: A Powerful Tool for Diagnostic and Therapeutic Aims

Cancer is known as one of the most significant causes of death worldwide, and, in spite of novel therapeutic methods, continues to cause a considerable number of deaths. Targeted molecular diagnosis and therapy using aptamers with high affinity have become popular techniques for pathological angiogenesis and cancer therapy scientists. In this paper, several aptamer-based diagnostic and therapeutic techniques such as aptamer-nanomaterial conjugation, aptamer-drug conjugation (physically or covalently), and biosensors, which have been successfully designed for biomarkers, were critically reviewed. The results demonstrated that aptamers can potentially be incorporated with targeted delivery systems and biosensors for the detection of biomarkers expressed by cancer cells. Aptamer-based therapeutic and diagnostic methods, representing the main field of medical sciences, possess high potential for use in cancer therapy, pathological angiogenesis, and improvement of community health. The clinical use of aptamers is limited due to target impurities, inaccuracy in the systematic evolution of ligands via exponential enrichment (SELEX)stage process, and in vitro synthesis, making them unreliable and leading to lower selectivity for in vivo targets. Moreover, size, behavior, probable toxicity, low distribution, and the unpredictable behavior of nanomaterials in in vivo media make their usage in clinical assays critical. This review is helpful for the implementation of aptamer-based therapies which are effective and applicable for clinical use and the design of future studies.

Research progress on nanomaterial-based matrices for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis

Matrix assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) is a novel soft ionization bio-mass spectrometry technology emerging in the 1980s, which can realize rapid detection of non-volatile, highly polar, and thermally unstable macromolecules. However, the analysis of small molecular compounds has been a major problem for MALDI-TOF MS all the time. In the MALDI analysis process based on traditional matrices, large numbers of interference peaks in the low molecular weight area and "sweet spots" phenomenon are produced, so the detection method needs to be further optimized. The promotion of matrix means the improvement of MALDI performance. In recent years, many new nanomaterial-based matrices have been successfully applied to the analysis of small molecular compounds, which makes MALDI applicable to a wider range of detection and useful in more fields such as pharmacy and environmental science. In this paper, the newly developed MALDI matrix categories in recent years are reviewed initially. Meanwhile, the potential applications, advantages and disadvantages of various matrices are analyzed. Finally, the future development prospects of nanomaterial-based matrices are also prospected.

An introductory review on advanced multifunctional materials

This review summarizes the applications of some of the advanced materials. It included the synthesis of several nanoparticles such as metal oxide nanoparticles (e.g., Fe₃O₄, ZnO, ZrOSO₄, MoO_3-x, CuO, AgFeO₂, Co₃O₄, CeO₂, SiO₂, and CuFeO₂); metal hydroxide nanosheets (e.g., Zn₅(OH)₈(NO₃)₂·2H₂O, Zn(OH)(NO₃)·H₂O, and Zn₅(OH)₈(NO₃)₂); metallic nanoparticles (Ag, Au, Pd, and Pt); carbon-based nanomaterials (graphene, graphene oxide (GO), graphitic carbon nitride (g-C₃N₄), and carbon dots (CDs)); biopolymers (cellulose, nanocellulose, TEMPO-oxidized cellulose nanofibers (TOCNFs), and chitosan); organic polymers (e.g. covalent-organic frameworks (COFs)); and hybrid materials (e.g. metal-organic frameworks (MOFs)). Most of these materials were applied in several fields such as environmental-based technologies (e.g., water remediation, air purification, gas storage), energy (production of hydrogen, dimethyl ether, solar cells, and supercapacitors), and biomedical sectors (sensing, biosensing, cancer therapy, and drug delivery). They can be used as efficient adsorbents and catalysts to remove emerging contaminants e.g., inorganic (i.e., heavy metals) and organic (e.g., dyes, antibiotics, pesticides, and oils in water via adsorption. They can be also used as catalysts for catalytic degradation reactions such as redox reactions of pollutants. They can be used as filters for air purification by capturing carbon dioxide (CO₂) and volatile organic compounds (VOCs). They can be used for hydrogen production via water splitting, alcohol oxidation, and hydrolysis of NaBH₄. Nanomedicine for some of these materials was also included being an effective agent as an antibacterial, nanocarrier for drug delivery, and probe for biosensing.

Detection of Short Peptides as Putative Biosignatures of Psychrophiles via Laser Desorption Mass Spectrometry

Studies of psychrophilic life on Earth provide chemical clues as to how extraterrestrial life could maintain viability in cryogenic environments. If living systems in ocean worlds (e.g., Enceladus) share a similar set of 3-mer and 4-mer peptides to the psychrophile Colwellia psychrerythraea on Earth, spaceflight technologies and analytical methods need to be developed to detect and sequence these putative biosignatures. We demonstrate that laser desorption mass spectrometry, as implemented by the CORALS spaceflight prototype instrument, enables the detection of protonated peptides, their dimers, and metal adducts. The addition of silicon nanoparticles promotes the ionization efficiency, improves mass resolving power and mass accuracies via reduction of metastable decay, and facilitates peptide de novo sequencing. The CORALS instrument, which integrates a pulsed UV laser source and an Orbitrap™ mass analyzer capable of ultrahigh mass resolving powers and mass accuracies, represents an emerging technology for planetary exploration and a pathfinder for advanced technique development for astrobiological objectives. Teaser: Current spaceflight prototype instrument proposed to visit ocean worlds can detect and sequence peptides that are found enriched in at least one strain of microbe surviving in subzero icy brines via silicon nanoparticle-assisted laser desorption analysis.

Combined Use of MALDI-TOF Mass Spectrometry and 31P NMR Spectroscopy for the Analysis of (Phospho)Lipids

Lipids are important and abundant constituents of all biological tissues and body fluids. In particular, phospholipids (PLs) constitute a major part of the cellular membrane and play a role in signal transduction, and some selected PLs are increasingly considered as potential disease markers. Unfortunately, methods of lipid analysis are less established in comparison to techniques of protein analysis. Mass spectrometry (MS) is an increasingly used technique to analyze lipids, especially in combination with electrospray ionization MS, which is the most commonly used ionization technique in lipidomics. Matrix-assisted laser desorption/ionization coupled to time-of-flight MS (MALDI-TOF MS) has itself proven to represent a useful tool in the field of lipid analysis. ³¹P nuclear magnetic resonance (NMR) spectroscopy, another powerful method for PL analysis, represents a direct quantitative method and does not suffer from suppression effects.This paper gives an overview of methodological aspects of MALDI-TOF MS and ³¹P NMR in lipid research and summarizes the specific advantages and drawbacks of both methods. In particular, suppression effects in MS will be highlighted, and possible ways to overcome this problem, e.g., the use of different matrices and separation of the relevant lipid mixture prior to analysis, will be discussed.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: An update for 2017-2018

This review is the tenth update of the original article published in 1999 on the application of matrix-assisted laser desorption/ionization mass spectrometry (MALDI) mass spectrometry to the analysis of carbohydrates and glycoconjugates and brings coverage of the literature to the end of 2018. Also included are papers that describe methods appropriate to glycan and glycoprotein analysis by MALDI, such as sample preparation techniques, even though the ionization method is not MALDI. Topics covered in the first part of the review include general aspects such as theory of the MALDI process, new methods, matrices, derivatization, MALDI imaging, fragmentation and the use of arrays. The second part of the review is devoted to applications to various structural types such as oligo- and poly-saccharides, glycoproteins, glycolipids, glycosides, and biopharmaceuticals. Most of the applications are presented in tabular form. The third part of the review covers medical and industrial applications of the technique, studies of enzyme reactions, and applications to chemical synthesis. The reported work shows increasing use of combined new techniques such as ion mobility and highlights the impact that MALDI imaging is having across a range of diciplines. MALDI is still an ideal technique for carbohydrate analysis and advancements in the technique and the range of applications continue steady progress.

What are we imaging? Software tools and experimental strategies for annotation and identification of small molecules in mass spectrometry imaging

Mass spectrometry imaging (MSI) has become a widespread analytical technique to perform nonlabeled spatial molecular identification. The Achilles' heel of MSI is the annotation and identification of molecular species due to intrinsic limitations of the technique (lack of chromatographic separation and the difficulty to apply tandem MS). Successful strategies to perform annotation and identification combine extra analytical steps, like using orthogonal analytical techniques to identify compounds; with algorithms that integrate the spectral and spatial information. In this review, we discuss different experimental strategies and bioinformatics tools to annotate and identify compounds in MSI experiments. We target strategies and tools for small molecule applications, such as lipidomics and metabolomics. First, we explain how sample preparation and the acquisition process influences annotation and identification, from sample preservation to the use of orthogonal techniques. Then, we review twelve software tools for annotation and identification in MSI. Finally, we offer perspectives on two current needs of the MSI community: the adaptation of guidelines for communicating confidence levels in identifications; and the creation of a standard format to store and exchange annotations and identifications in MSI.

Dual-Mechanism-Driven Strategy for High-Coverage Detection of Serum Lipids on a Novel SALDI-MS Target

Serum lipid metabolites have been emerging as ideal biomarkers for disease diagnosis and prediction. In the current stage, nontargeted or targeted lipidomic research mainly relies on a liquid chromatography-mass spectrometry (LC-MS) platform, but future clinical applications need more robust and high-speed platforms. Surface-assisted laser desorption ionization mass spectrometry (SALDI-MS) has shown excellent advantages in the high-speed analysis of lipid metabolites. However, the platform in the positive ion mode is more inclined to target a certain class of lipids, leading to the low coverage of lipid detection and limiting its practical translation to clinical applications. Herein, we proposed a dual-mechanism-driven strategy for high-coverage detection of serum lipids on a novel SALDI-MS target, which is a composite nanostructure comprising vertical silicon nanowires (VSiNWs) decorated with AuNPs and polydopamine (VSiNW-Au-PDA). The performance of laser desorption and ionization on the target can be enhanced by charge-driven desorption coupled with thermal-driven desorption. Simultaneous detection of 236 serum lipids (S/N ≥ 5) including neutral and polar lipids can be achieved in the positive ion mode. Among these, 107 lipid peaks were successfully identified. When combined with VSiNW-Au-PDA and VSiNW chips, 479 lipid peaks can be detected in serum samples in positive and negative ion modes, respectively. Based on the platform, serum samples from 57 hepatocellular carcinoma (HCC) patients and 76 healthy controls were analyzed. After data mining, 14 lipids containing different lipid types (TAG, CE, PC) were selected as potential lipidomic biomarkers. With the assistance of an artificial neural network, a diagnostic model with a sensitivity of 92.7% and a specificity of 96% was constructed for HCC diagnosis.

Maltose-functional metal-organic framework assisted laser desorption/ionization mass spectrometry for small biomolecule determination

A series of functional metal-organic frameworks (MOFs) were facilely prepared through an one-pot procedure or post-synthetic modification strategy and used as matrices in laser desorption ionization mass spectrometry (LDI-MS). Compared with traditional organic matrices and other MOFs, maltose-functional MOF MIL-101-maltose demonstrated ultrahigh ionization efficiency, free matrix background, uniform crystallization, and good dispersibility. A simple, general, and efficient LDI-MS platform was developed for rapid detection of various small biomolecules using MIL-101-maltose as matrix, providing several advantages including low sample consumption of 500 nL, short analysis time of few seconds, strong salt tolerance (500 mM NaCl), and satisfactory reproducibility. The MIL-101-maltose matrix was used for serum glucose determination and successfully distinguished the diabetic patients from the healthy controls. This work provides a generic LDI-MS platform for fast determination of small biomolecules with high potential in clinical diagnosis and disease monitoring.

Surface-assisted laser desorption/ionization mass spectrometry imaging: A review

In the last decades, surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) has attracted increasing interest due to its unique capabilities, achievable through the nanostructured substrates used to promote the analyte desorption/ionization. While the most widely recognized asset of SALDI-MS is the untargeted analysis of small molecules, this technique also offers the possibility of targeted approaches. In particular, the implementation of SALDI-MS imaging (SALDI-MSI), which is the focus of this review, opens up new opportunities. After a brief discussion of the nomenclature and the fundamental mechanisms associated with this technique, which are still highly controversial, the analytical strategies to perform SALDI-MSI are extensively discussed. Emphasis is placed on the sample preparation but also on the selection of the nanosubstrate (in terms of chemical composition and morphology) as well as its functionalization possibilities for the selective analysis of specific compounds in targeted approaches. Subsequently, some selected applications of SALDI-MSI in various fields (i.e., biomedical, biological, environmental, and forensic) are presented. The strengths and the remaining limitations of SALDI-MSI are finally summarized in the conclusion and some perspectives of this technique, which has a bright future, are proposed in this section.

SALDI Substrate-Based FeNi Magnetic Alloy Nanoparticles for Forensic Analysis of Poisons in Human Serum

In this study, FeNi magnetic alloy nanoparticles (MANPs) were employed for the forensic analysis of four poisons—dimethametryn, napropamide, thiodicarb, and strychnine—using surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS). FeNi MANPs were prepared via coprecipitation using two reducing agents, sodium borohydride (NaBH4) and hydrazine monohydrate (N2H4·H2O), to optimize the prepared MANPs and investigate their effect on the performance of SALDI-MS analysis. Thereafter, SALDI-MS analysis was carried out for the detection of three pesticides and a rodenticide. The prepared substrate offered sensitive detection of the targeted analytes with LOD values of 1 ng/mL, 100 pg/mL, 10 ng/mL, and 200 ng/mL for dimethametryn, napropamide, thiodicarb, and strychnine, respectively. The relative standard deviation (%RSD) values were in the range of 2.30–13.97% for the pesticides and 15–23.81% for strychnine, demonstrating the good spot-to-spot reproducibility of the FeNi substrate. Finally, the MANPs were successfully employed in the analysis of poison-spiked blood serum using a minute quantity of the sample with an LOD of 700 ng/mL dimethametryn and napropamide, 800 ng/mL thiodicarb, and 500 ng/mL strychnine. This study has great potential regarding the analysis of several poisons that may be found in human serum, which is significant in cases of self-harm.

Laser Ablation Synthesis in Solution and Nebulization of Silver-109 Nanoparticles for Mass Spectrometry and Mass Spectrometry Imaging

Preparation of monoisotopic silver-109 nanoparticles (¹⁰⁹AgNPs) by pulsed fiber laser (PFL) ablation synthesis in solution (LASiS) with the use of a 2D galvoscanner (2D GS) is described. The procedure of covering of custom-made stainless-steel MALDI targets containing studied objects via nebulization is also presented. Examples of application of the new method (PFL-2D GS LASiS and nebulization) in mass spectrometry (MS) analyses and MS imaging (MSI) are shown. These include tests with a nonionic nucleoside and saccharide, ionic amino acids, and also a low-molecular-weight polymer. Fingerprint MS imaging is shown as an example of a fast and simple MSI procedure.

NH2NH-MOF: a reaction matrix for the specific determination of small aldehydes by MALDI-MS

Efficient determination of aldehydes by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) is hampered mainly by the low mass and unstable nature of analytes. In the present work, we propose a combined strategy of a reactive metal-organic framework (MOF) matrix for the derivatization and detection of aldehydes. A novel reactive MOF matrix (NH₂NH-MOF) was synthesized in two steps. First, NR₃⁺-MOF was synthesized via Cu²⁺ and the quaternary amine ligand 4,4'-bipyridinium, 1,1″-(1,2-ethanediyl)bis-, dibromide (PyEtBr). Then, -NHNH₂ was introduced to NR₃⁺-MOF through electrostatic adsorption between the -NR₃⁺ and -HSO₃^- of 4-hydrazinylbenzenesulfonic acid to synthesize NH₂NH-MOF. The acid-base chemistry of NH₂NH-MOF led to uniform cocrystallization of the aldehyde-matrix mixtures and helped to achieve the detection of low-weight aldehydes with good relative standard deviations (RSDs = 0.07-12.35%). It was confirmed that this strategy can accurately quantify formaldehyde, valeraldehyde, and benzaldehyde with good linearity (r > 0.97). Furthermore, this strategy was applied to quantitatively detect benzaldehyde in wastewater, thus showing potential applications in environmental pollutant detection.

Improvement of Transfection with PepFects Using Organic and Inorganic Materials

Cell-penetrating peptides (CPPs) are a promising non-viral vector for gene and drug delivery. CPPs exhibit high cell transfection, and are biocompatible. They can be also conjugated with organic and inorganic nanomaterials, such as magnetic nanoparticles (MNPs), graphene oxide (GO), metal-organic frameworks (MOFs), and chitosan. Nanomaterials offered a high specific surface area and provided relatively straightforward methods to be modified with biomolecules including CPPs and oligonucleotides (ONs). Novel nanomaterials conjugates with CPP/ONs complexes are therefore of interest for cell transfection with high efficiency. In this chapter, we described a summary of the non-viral vectors consisting of CPPs and nanomaterials. The book chapter also included a protocol to generate hybrid biomaterials consisting of CPPs and nanoparticles (NPs) for the delivery of oligonucleotides. The conjugation of NPs with CPPs serves as an effective platform for gene therapy with high cell transfection efficiency. The protocol is simple, offers high cell transfection compared to the CPPs-ONs complexes, and can be used for further improvements using external stimuli.

Functionalization of Magnetic Beads with Biotinylated Nanobodies for MALDI-TOF/MS-Based Quantitation of Small Analytes

Over the last two decades, the variable domains from heavy chain-only antibodies in camelids (nanobodies) have emerged as valuable immunoreagents for analytical and diagnostic applications. One prominent use of nanobodies is for the detection of small molecules due to their ease of production, resistance to solvents used in sample extraction, facile genetic manipulation, and small size. These last two properties make it possible to produce biotinylated nanobodies in vivo, which can be loaded in an orientated manner on magnetic beads covered with avidin, creating high-density immunoadsorbenpi twbch ""ts. The method described here details the use of nanobody-based adsorbents to concentrate small molecular weight analytes for subsequent quantitative analysis by MALDI-TOF mass spectrometry. Quantitation requires the inclusion of an internal standard (IS), a compound with properties similar to those of the analyte, enabling compensation for uneven distribution during crystallization of the MALDI-TOF matrix. Since nanobody generation against small compounds requires conjugation to carrier proteins, the same conjugation chemistry can be used to synthesize the IS. By design the IS cross reacts with the capture nanobody and can be preloaded in the immunoadsorbent, facilitating quantitative detection of the target compound.

Nanostructured Substrates as Matrices for Surface Assisted Laser Desorption/Ionization Mass Spectrometry: A Progress Report from Material Research to Biomedical Applications

Within the past two decades, the escalation of research output in nanotechnology fields has boosted the development of novel nanoparticles and nanostructured substrates for use as matrices in surface assisted laser desorption/ionization mass spectrometry (SALDI-MS). The application of nanomaterials as matrices, rather than organic matrices, offers remarkable characteristics that allow the analysis of small molecules with fewer matrix interfering peaks, and share higher detection sensitivity, specificity, and reproducibility. The technological advancement of SALDI-MS has in turn, propelled the application of the analytical technique in the field of biomedical analysis. In this review, the properties and fabrication methods of nanostructured substrates in SALDI-MS such as metallic-, carbon-, and silicon-based nanostructures, quantum dots, metal-organic frameworks, and covalent-organic frameworks are described. Additionally, the latest progress (most within 5 years) of biomedical applications in small molecule, large biomolecule, and MS imaging analysis including metabolite profiling, drug monitoring, bacteria identification, disease diagnosis, and therapeutic evaluation are demonstrated. Key parameters that govern nanomaterial's SALDI efficiency in biomolecule analysis are also discussed. Finally, perspectives of the future development are given to provide a better advancement and promote practical application in clinical MS.

Engineering of nanomaterials for mass spectrometry analysis of biomolecules

Mass spectrometry (MS) based analysis has received intense attention in diverse biological fields. However, direct MS interrogation of target biomolecules in complex biological samples is still challenging, due to the extremely low abundance and poor ionization potency of target biological species. Innovations in nanomaterials create new auxiliary tools for deep and comprehensive MS characterization of biomolecules. More recently, growing research interest has been directed to the compositional and structural engineering of nanomaterials for enriching target biomolecules prior to MS analysis, enhancing the ionization efficiency in MS detection and designing biosensing nanoprobes in sensitive MS readout. In this review, we mainly focus on the recent advances in the engineering of nanomaterials towards their applications in sample pre-treatment, desorption/ionization matrices and ion signal amplification for MS profiling of biomolecules. This review will provide a toolbox of nanomaterials for researchers devoted to developing analytical methods and practical applications in the biological MS field.

Nanocomposite-Based Matrices in Laser Desorption/Ionization Mass Spectrometry for Small-Molecule Analysis

The efficient detection of small molecules is of significance for environmental monitoring, pharmacology, metabolomics, and lipidomics. The laser desorption/ionization mass spectrometry (LDI MS) platform enables high sensitivity, accuracy, resolution, and throughput in molecular analysis, but its analytical capability with respect to small molecules is limited due to inherent drawbacks arising from conventional organic matrices. The selection of an appropriate matrix is thus a precondition for small molecule detection by LDI MS. To date, various inorganic matrices have been developed, with a growing interest in composite materials displaying synergetic effects. This Minireview highlights the development of nanocomposites as LDI matrices driven by numerous innovations in material science, and their emerging use in small-molecule analysis.

Nanobiotechnology as a platform for the diagnosis of COVID-19: a review

A sensitive method for diagnosing coronavirus disease 2019 (COVID-19) is highly required to fight the current and future global health threats due to severe acute respiratory syndrome coronavirus 2 (SARS-CoV 2). However, most of the current methods exhibited high false‐negative rates, resulting in patient misdiagnosis and impeding early treatment. Nanoparticles show promising performance and great potential to serve as a platform for diagnosing viral infection in a short time and with high sensitivity. This review highlighted the potential of nanoparticles as platforms for the diagnosis of COVID-19. Nanoparticles such as gold nanoparticles, magnetic nanoparticles, and graphene (G) were applied to detect SARS-CoV 2. They have been used for molecular-based diagnosis methods and serological methods. Nanoparticles improved specificity and shorten the time required for the diagnosis. They may be implemented into small devices that facilitate the self-diagnosis at home or in places such as airports and shops. Nanoparticles-based methods can be used for the analysis of virus-contaminated samples from a patient, surface, and air. The advantages and challenges were discussed to introduce useful information for designing a sensitive, fast, and low-cost diagnostic method. This review aims to present a helpful survey for the lesson learned from handling this outbreak to prepare ourself for future  pandemic.

Challenges and Strategies of Chemical Analysis of Drugs of Abuse and Explosives by Mass Spectrometry

In analytical science, mass spectrometry (MS) is known as a "gold analytical tool" because of its unique character of providing the direct molecular structural information of the relevant analyte molecules. Therefore, MS technique has widely been used in all branches of chemistry along with in proteomics, metabolomics, genomics, lipidomics, environmental monitoring etc. Mass spectrometry-based methods are very much needed for fast and reliable detection and quantification of drugs of abuse and explosives in order to provide fingerprint information for criminal investigation as well as for public security and safety at public places, respectively. Most of the compounds exist as their neutral form in nature except proteins, peptides, nucleic acids that are in ionic forms intrinsically. In MS, ion source is the heart of the MS that is used for ionizing the electrically neutral molecules. Performance of MS in terms of sensitivity and selectivity depends mainly on the efficiency of the ionization source. Accordingly, much attention has been paid to develop efficient ion sources for a wide range of compounds. Unfortunately, none of the commercial ion sources can be used for ionization of different types of compounds. Moreover, in MS, analyte molecules must be released into the gaseous phase and then ionize by using a suitable ion source for detection/quantification. Under these circumstances, fabrication of new ambient ion source and ultrasonic cutter blade-based non-thermal and thermal desorption methods have been taken into account. In this paper, challenges and strategies of mass spectrometry analysis of the drugs of abuse and explosives through fabrication of ambient ionization sources and new desorption methods for non-volatile compounds have been described. We will focus the literature progress mostly in the last decade and present our views for the future study.

Insights into the structure-performance relationships of extraction materials in sample preparation for chromatography

Sample preparation is one of the most crucial steps in analytical processes. Commonly used methods, including solid-phase extraction, dispersive solid-phase extraction, dispersive magnetic solid-phase extraction, and solid-phase microextraction, greatly depend on the extraction materials. In recent decades, a vast number of materials have been studied and used in sample preparation for chromatography. Due to the unique structural properties, extraction materials significantly improve the performance of extraction devices. Endowing extraction materials with suitable structural properties can shorten the pretreatment process and improve the extraction efficiency and selectivity. To understand the structure-performance relationships of extraction materials, this review systematically summarizes the structural properties, including the pore size, pore shape, pore volume, accessibility of active sites, specific surface area, functional groups and physicochemical properties. The mechanisms by which the structural properties influence the extraction performance are also elucidated in detail. Finally, three principles for the design and synthesis of extraction materials are summarized. This review can provide systematic guidelines for synthesizing extraction materials and preparing extraction devices.

Recent development of nanoparticle-assisted metabolites analysis with mass spectrometry

Metabolomics systematically studies the changes of metabolites in biological systems in the temporal or spatial dimensions. It is a challenging task for comprehensive analysis of metabolomics because of diverse physicochemical properties and wide concentration distribution of metabolites. Used as enrichment sorbents, chemoselective probes, chromatographic stationary phases, MS ionization matrix, nanomaterials play excellent roles in improving the selectivity, separation performance, detection sensitivity and identification efficiency of metabolites when mass spectrometry is employed as the detection technique. This review summarized the recent development of nanoparticle-assisted metabolites analysis in terms of assisting the pretreatment of biological samples, improving the separation performance and enhancing the MALDI-MS detection.

Gold and silver nanoparticles-based laser desorption/ionization mass spectrometry method for detection and quantification of carboxylic acids

A comparison of ionization efficiency for gold and silver nanoparticles used as an active media of matrix-less laser desorption/ionization (LDI) mass spectrometry (MS) methods was made for carboxylic acids including fatty acids. The matrix-assisted laser desorption/ionization (MALDI)-type targets containing monoisotopic cationic ¹⁰⁹ Ag nanoparticles (¹⁰⁹ AgNPs) and Au nanoparticles (AuNPs) were used for rapid MS measurements of 10 carboxylic acids of different chemical properties. Carboxylic acids were directly quantified in experiments with 10 000-fold concentration change conditions ranging from 1 mg/ml to 100 ng/ml which equates to 1 μg to 100 pg of carboxylic acids per measurement spot.

Self-assembled matrix fabricated by Fe-metal organic frameworks and carboxymethyl cellulose for the determination of small molecules by MALDI-TOF MS

A nanoprobe of laser desorption/ionization-time of flight mass spectrometry (LDI-TOF MS) for the determination of small molecules was developed that is based on the composition of Fe-metal organic frameworks (Fe-MOFs) and carboxymethyl cellulose-Na (CMC-Na). This material is a good adsorbent for small molecules via hydrogen bonding and π-interactions; we detected three molecules, dopamine, glyphosate, and pyrene. The detection limits for these compounds are 0.01 mg L^-1, 1.50 μg L^-1, and 0.01 μg L^-1, respectively; the recoveries are 85-117%, 81-127%, and 89-115%, respectively. The relative standard deviations (~ 15%) and coefficients of determination of the calibration plot (~ 0.97) are satisfactory. The applicability of the chip for practical samples is demonstrated by quantifying pyrene in domestic water and polluted lake water; the recoveries are about 90~117% and 85~125% (n = 5), respectively; the RSDs are 9.4% and 13.5%, respectively. Graphical abstract.

Molecular characterization of polyethylene oxide based oligomers by surface-assisted laser desorption/ionization mass spectrometry using a through-hole alumina membrane as active substrate

RATIONALE

Molecular characterization of industrial oligomeric products is performed using surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS), termed desorption ionization using a through-hole alumina membrane (DIUTHAME). This paper describes the unique feature of a DIUTHAME chip applying active SALDI, which generates specific types of fragments of polyglycol samples.

METHODS

Polyethylene oxide (PEO) and PEO-based materials were subjected to SALDI-MS. The influence of the presence or absence of a cationization salt on the mass spectrum was investigated. The resulting mass spectra composed of fragment ions were compared with those obtained by collision-induced dissociation (CID)-MS/MS. The specific fragment ions generated using the DIUTHAME chip were further subjected to high-energy CID-MS/MS.

RESULTS

The addition of a cationization salt resulted in SALDI mass spectra with fewer fragment peaks. The mass spectra obtained without adding the cationization salt were composed of many more fragment ions caused by in-source decay. The fragmentation pattern was similar to that seen with low-energy CID. The resulting fragment ions were formed by selective cleavage at the C-O bond. High-energy CID-MS/MS can be performed for the specific fragment ions generated by in-source decay fragmentation.

CONCLUSIONS

Molecular characterization of PEO-based oligomers by SALDI-MS using the DIUTHAME chip was successfully demonstrated. The selective fragmentation and high-energy CID-MS/MS of the in-source decay fragments made it possible to provide more detailed structural information. This unique feature of DIUTHAME gives it potential for use in new molecular characterization techniques.

Zirconium Oxide Sulfate-Carbon (ZrOSO4@C) Derived from Carbonized UiO-66 for Selective Production of Dimethyl Ether

Methanol dehydration process to dimethyl ether (DME) has been considered as one of the main routes to produce clean fuel, that is, DME. Thus, efficient catalysts are highly required for selective production of DME. Herein, UiO-66 was used as a precursor for the synthesis of zirconium oxide sulfate embedded carbon (ZrOSO₄@C). The synthesis method involves a one-step carbonization of UiO-66 in the presence of sulfuric acid (10 wt %). Material characterizations using X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared, and Raman spectroscopy approve the formation of the high crystalline phase of ZrOSO₄@C. Nitrogen adsorption-desorption isotherms and high-resolution transmission electron microscopy confirm the mesopore structure of the materials. Acidity analysis using pyridine temperature-programmed desorption and isopropanol dehydration corroborates that ZrOSO₄@C has weak and intermediate acidic sites making ZrOSO₄@C an effective catalyst for methanol dehydration to DME. The materials offered full conversion (100%) with excellent selectivity (100%) at a relatively low temperature (250 °C). The catalyst exhibited a long-term stability for 120 h. Based on these results, DME is produced efficiently in terms of conversion, selectivity, and long-term stability.

Hierarchical porous ZIF-8 for hydrogen production via the hydrolysis of sodium borohydride

Terephthalic acid (TPA) is used for the synthesis of hierarchical porous zeolitic imidazolate framework (HPZIF-8) which shows high catalytic activity for the hydrolysis of NaBH₄ (2333 mL_H2 min⁻¹ g_cat⁻¹).

A cerium-based MOFzyme with multi-enzyme-like activity for the disruption and inhibition of fungal recolonization

A cerium-based metal–organic framework (Ce-MOF, denoted as AU-1) was synthesized using a solvothermal method by employing 4,4′,4′′-nitrilotribenzoic acid (H₃NTB) as the linker and cerium clusters as the metal center.

A New Binary Matrix for Specific Detection of Mercury(II) Using Matrix-Assisted Laser Desorption Ionization Mass Spectrometry

The development of simple, low-cost, and specific detection method for mercury (Hg(II)) ions in aqueous media using matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) is a challenge due to matrix interferences and acidity that destroy weak interactions. Herein, a new binary matrix consists of mefenamic acid, and thymine (T) is applied for simple and specific detection of Hg(II) in aqueous solution and blood sample. Mass spectra show metal-to-ligand ratio of 1:2 (Hg(II):T) in which Hg(II) ions are bound to two T molecules and two water molecules, i.e., [Hg(T)₂(H₂O)₂]. The method is simple and fast, and requires cheap reagents. In addition, the spectra show extremely specific signals for Hg(II) ions and insignificant signals in case of other competing metal ions. The concept of our protocol can be applied for other metals. The new matrix may be used for the analysis of small molecules with minimal interferences peaks.

Core-shell hollow spheres of type C@MoS2 for use in surface-assisted laser desorption/ionization time of flight mass spectrometry of small molecules

Mesoporous carbon hollow spheres coated with MoS₂ (C@MoS₂) were synthesized to obtain a material with large specific surface area, fast electron transfer efficiency and good water dispersibility. The composite material was applied as a matrix for the analysis of small molecules by surface-assisted laser desorption/ionization time-of-flight mass spectrometry (SALDI-TOF MS). The use of a core-shell C@MoS₂ matrix strongly reduces matrix background interferences and increases signal intensity in the analysis of sulfonamides antibiotics (SAs), cationic dyes, emodin, as well as estrogen and amino acids. The composite material was applied to the SALDI-TOF MS analysis of selected molecules in (spiked) real samples. The ionization mechanism of the core-shell C@MoS₂ as a matrix is discussed. The method exhibits low fragmentation interference, excellent ionization efficiency, high reproducibility and satisfactory salt tolerance. Graphical abstractSchematic representation of the method for fabrication of MoS₂-coated mesoporous carbon hollow spheres (core-shell C@MoS₂). As a new matrix, the nanocomposites were applied to analysis of small molecules by surface-assisted laser desorption/ionization time-of-flight mass spectrometry.

Surfactant assisted synthesis of hierarchical porous metal-organic frameworks nanosheets

Two-dimensional metal-organic frameworks show increasing research attention due to their unique properties including tunable thickness, simple packing into a film and membrane, and high surface-to-volume atom ratios. A bottom-up synthesis strategy using cetyltrimethylammonium bromide for the synthesis of copper-benzenedicarboxylate (Cu(BDC)) nanosheets is reported. The method offers the synthesis of hierarchical porous Cu(BDC) lamellae with micrometer lateral dimensions, and nanometer thickness (100-150 nm). Electron microscope (scanning and transmission), and N₂ adsorption isotherms confirm the formation of lamellae Cu(BDC) with mesopore size of 5-80 nm. The material has thermal stability up to 400 °C with good chemical stability in several organic solvents. However, the material transforms to another phase (Cu(BDC)(H₂O)₂) when soaked in water and alcohols. The transformation reduces crystal size and offers the formation of hydrogen bond resulting in an increase in the sorption of CO₂ by ∼10% compared to the pristine material Cu(BDC).

Synergistic Effect of Metal-Organic Framework/Gallic Acid in Enhanced Laser Desorption/Ionization Mass Spectrometry

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) has become an indispensable tool for high-throughput analysis of macromolecules, but many challenges still remain in detection of small molecules due to the severe matrix-related background interference in the low-molecular-weight ranges (MW < 700 Da). Herein, a gallic acid (GA)-functionalized zirconium 1,4-dicarboxybenzene metal-organic framework (MOF) (denoted as UiO-66-GA) was designed to serve as a new substrate, and a novel strategy on the basis of the synergistic effect of MOF and GA was developed to enhance the LDI process. In comparison with conventional organic matrices, the UiO-66-GA substrate showed superior LDI performance in the analysis of a wide variety of molecules including amino acids, unsaturated fatty acids, bisphenols (BPs), oligosaccharides, peptides, protein, and polyethylene glycol (PEG) of various average molecular weights from 200 to 10000. Perfluorooctanoic sulfonate (PFOS) was used to evaluate the ability of quantitative analysis, and its corresponding limit of detection as low as 1 fmol was achieved. High sensitivity and good salt tolerance of the UiO-66-GA-assisted LDI-MS were allowed to determine ultratrace PFOS in the spiked human urine and serum samples. In addition, the synergistic mechanism of MOF and GA in the enhanced LDI process was investigated by comprehensively comparing GA- and its analogue-functionalized UiO-66, and the results revealed that two aspects contributed to the enhanced LDI process: (1) an enhancement in the metal-phenolic coordination system of UiO-66-GA promoted laser absorption and energy transfer; (2) introduction of carboxyl and hydroxyl groups of GA onto UiO-66 facilitated the LDI process in both positive and negative ion modes. This work expands a new domain for the MOF applications and provides a promising alternative for various molecule analyses.

A boronic acid modified binary matrix consisting of boron nitride and α-cyano-4-hydroxycinnamic acid for determination of cis-diols by MALDI-TOF MS

A MALDI-TOF mass spectrometric method is described for the determination of small molecule compounds with cis-diol. It is based on the use of a binary matrix consisting of boron nitride (BN) and α-cyano-4-hydroxycinnamic acid that was modified with the derivatization reagent of (3-(acridin-9-ylamino)phenyl)boronic acid which can recognize cis-diols. The binary matrix is used for desorption/ionization (DI) in the positive ion mode. The mechanism leading to DI enhancement was investigated. The results imply that BN is beneficial for the DI because it induces an enhancement in the positive ion mode. The boronic acid-functionalized binary matrix was successfully applied to capture the glucose, shikimic acid and quinic acid. The method was applied to the determination of 3-chloro-1,2-propanediol in plant oil. Graphical abstract Schematic representation of a method for detecting the cis-diol compounds on matrix assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) using the binary matrix of boron nitride (BN)/α-cyano-4-hydroxycinnamic acid (CHCA) that was modified with (3-(acridin-9-ylamino)phenyl) boronic acid (AYPBA).