Detection of Malachite Green using a colorimetric aptasensor based on the inhibition of the peroxidase-like activity of gold nanoparticles by cetyltrimethylammonium ions

Aptasensors Based on Non-Enzymatic Peroxidase Mimics: Current Progress and Challenges

Immunoassays based on antibodies as recognizing elements and enzymes as signal-generating modules are extensively used now in clinical lab diagnostics, food, and environmental analyses. However, the application of natural enzymes and antibodies has some drawbacks, such as relatively high manufacturing costs, thermal instability, and lot-to-lot variations that lower the reproducibility of results. Oligonucleotide aptamers are able to specifically bind their targets with high affinity and selectivity, so they represent a prospective alternative to protein antibodies for analyte recognition. Their main advantages include thermal stability and long shelf life, cost-efficient chemical synthesis, and negligible batch-to-batch variations. At the same time, a wide variety of non-protein peroxidase mimics are now available that show strong potential to replace protein enzymes. Here, we review and analyze non-protein biosensors that represent a nexus of these two concepts: aptamer-based sensors (aptasensors) with optical detection (colorimetric, luminescent, or fluorescent) based on different peroxidase mimics, such as DNAzymes, nanoparticles, or metal-organic frameworks.

Surface modification strategies and the functional mechanisms of gold nanozyme in biosensing and bioassay

Gold nanozymes (GNZs) have been widely used in biosensing and bioassay due to their interesting catalytic activities that enable the substitution of natural enzyme. This review explains different catalytic activities of GNZs that can be achieved by applying different modifications to their surface. The role of Gold nanoparticles (GNPs) in mimicking oxidoreductase, helicase, phosphatase were introduced. Moreover, the effect of surface properties and modifications on each catalytic activity was thoroughly discussed. The application of GNZs in biosensing and bioassay was classified in five categories based on the combination of the enzyme like activities and enhancing/inhibition of the catalytic activities in presence of the target analyte/s that is realized by proper surface modification engineering. These categories include catalytic activity enhancer, reversible catalytic activity inhibitor, binding selectivity enhancer, agglomeration base, and multienzyme like activity, which are explained and exemplified in this review. It also gives examples of those modifications that enable the application of GNZs for in vivo biosensing and bioassays.

On-site colorimetric detection of Salmonella typhimurium

Rapid qualitative and quantitative detection of Salmonella typhimurium (S. typhimurium) takes an important role in ensuring food safety. Herein, a colorimetric assay aptasensor for S. typhimurium utilizing intrinsic peroxidase-like activity of gold nanoparticles embedded spherical covalent organic framework and the affinity and specificity of S. typhimurium-aptamer has been explored. This aptasensor can capture the S. typhimurium via the selective binding effect of aptamer, and the catalytically active sites were shielded. As a result, the colorimetric signals of the 3,3′,5,5′-tetramethylbenzidine-H₂O₂ system were turned off. Under optimum conditions, the aptasensor gave a linear response over the range of 10 to 10⁷ CFU/mL for S. typhimurium. The detection limit of 7 CFU/mL was obtained within 45 min and was effectively applied to detect S. typhimurium in milk and lake water samples with recoveries in the range from 96.4 to 101.0%. More importantly, combined with a self-developed smartphone-based image analysis system, the proposed aptasensor can be used for point-of-care testing applications.

Gold nanoparticle-based optical nanosensors for food and health safety monitoring: recent advances and future perspectives

Modern society has been facing serious health-related problems including food safety, diseases and illness. Hence, it is urgent to develop analysis methods for the detection and control of food contaminants, disease biomarkers and pathogens. As the traditional instrumental methods have several disadvantages, including being time consuming, and having high cost and laborious procedures, optical nanosensors have emerged as promising alternative or complementary approaches to those traditional ones. With the advantages of simple preparation, high surface-to-volume ratio, excellent biocompatibility, and especially, unique optical properties, gold nanoparticles (AuNPs) have been demonstrated as excellent transducers for optical sensing systems. Herein, we provide an overview of the synthesis of AuNPs and their excellent optical properties that are ideal for the development of optical nanosensors based on local surface plasmon resonance (LSPR), colorimetry, fluorescence resonance energy transfer (FRET), and surface-enhanced Raman scattering (SERS) phenomena. We also review the sensing strategies and their mechanisms, as well as summarizing the recent advances in the monitoring of food contaminants, disease biomarkers and pathogens using developed AuNP-based optical nanosensors in the past seven years (2015-now). Furthermore, trends and challenges in the application of these nanosensors in the determination of those analytes are discussed to suggest possible directions for future developments.

Selection and Application of ssDNA Aptamers for Fluorescence Biosensing Detection of Malachite Green

Malachite green oxalate (MG) is a kind of veterinary drug, which is freely soluble in water and hazardous to aquatic products, resulting in food toxicity and human health problems. The demand for effective and sensitive detection of MG residues is increasing in food safety. In this work, three DNA aptamers MG-36-12/16/17 targeting MG with good affinity (Kd values were 169.78, 71.94, and 102.46 μM, respectively) were obtained by Capture-SELEX. Furthermore, MG-36-12, MG-76-16-6A, and MG-36-17 were found to perform sensitively and specifically to detect MG as a sensing probe in a FRET fluorescent aptasensor, where the FAM-labeled aptamer and GO were employed as efficient energy donor–acceptor pair. The linear range of this aptasensor using aptamer MG-36-12 was from 4 to 1200 ng/mL and the LOD was as low as 1.82 ng/mL. Additionally, the fluorescent assay using aptamer MG-36-17 to detect MG exhibited a linear relationship from 4 to 2000 ng/mL and a LOD of 5.05 ng/mL. Meanwhile, the aptasensor showed high specificity to MG with no cross-reactivity to other veterinary drugs and had a mean recovery of 82.77% to 102.48% in actual water samples from the aquatic product market.

Regulation Mechanism of ssDNA Aptamer in Nanozymes and Application of Nanozyme-Based Aptasensors in Food Safety

Food safety issues are a worldwide concern. Pathogens, toxins, pesticides, veterinary drugs, heavy metals, and illegal additives are frequently reported to contaminate food and pose a serious threat to human health. Conventional detection methods have difficulties fulfilling the requirements for food development in a modern society. Therefore, novel rapid detection methods are urgently needed for on-site and rapid screening of massive food samples. Due to the extraordinary properties of nanozymes and aptamers, biosensors composed of both of them provide considerable advantages in analytical performances, including sensitivity, specificity, repeatability, and accuracy. They are considered a promising complementary detection method on top of conventional ones for the rapid and accurate detection of food contaminants. In recent years, we have witnessed a flourishing of analytical strategies based on aptamers and nanozymes for the detection of food contaminants, especially novel detection models based on the regulation by single-stranded DNA (ssDNA) of nanozyme activity. However, the applications of nanozyme-based aptasensors in food safety are seldom reviewed. Thus, this paper aims to provide a comprehensive review on nanozyme-based aptasensors in food safety, which are arranged according to the different interaction modes of ssDNA and nanozymes: aptasensors based on nanozyme activity either inhibited or enhanced by ssDNA, nanozymes as signal tags, and other methods. Before introducing the nanozyme-based aptasensors, the regulation by ssDNA of nanozyme activity via diverse factors is discussed systematically for precisely tailoring nanozyme activity in biosensors. Furthermore, current challenges are emphasized, and future perspectives are discussed.

Aptamer-based biosensors and application in tumor theranostics

An aptamer is a short oligonucleotide chain that can specifically recognize targeting analytes. Due to its high specificity, low cost, and good biocompatibility, aptamers as the targeting elements of biosensors have been applied widely in non-invasive tumor imaging and treatment in situ to replace traditional methods. In this review, we will summarize recent advances in using aptamer-based biosensors in tumor diagnosis. After a brief introduction of the advantage of aptamers compared with enzyme sensors and immune sensors, the different sensing designs and mechanisms based on 3 signal transduction modes will be reviewed to cover different kinds of analytical methods, including: electrochemistry analysis, colorimetry analysis, and fluorescence analysis. Finally, the prospective advantages of aptamer-based biosensors in tumor theranostics and post-treatment monitoring are also evaluated in this review.

Application of the catalytic activity of gold nanoparticles for development of optical aptasensors

Biosensor technology is considered to be a great alternative in analytical techniques over the conventional methods. Among many recently developed techniques and devices, aptasensors are interesting because of their high specificity, selectivity and sensitivity. Combining aptamer as a biological recognition element with gold nanoparticles (AuNPs) as probe, are becoming more general owing to their beneficial properties, including low cost and ability to analyze specific targets on-site and using naked eye. Hydrogen bonds, nucleic acid hybridization, aptamer-target and antigen-antibody binding, Raman signature, enzyme inhibition, and enzyme-mimicking activity are main different sensing strategies exploited in AuNPs-based optical aptasensors. In this review article, we discussed the recent advances in optical aptasensors with a special emphasis on the catalytic activity property of AuNPs.

Applications of gold nanoparticles in ELISA, PCR, and immuno-PCR assays: A review

Development of state-of-the-art assays for sensitive and specific detection of disease biomarkers has received significant interest for early detection and prevention of various diseases. Enzyme Linked Immunosorbent assays (ELISA) and Polymerase Chain Reaction (PCR) are two examples of proteins and nucleic acid detection assays respectively, which have been widely used for the sensitive detection of target analytes in biological fluids. Recently, immuno-PCR has emerged as a sensitive detection method, where high specificity of sandwich ELISA assays is combined with high sensitivity of PCR for trace detection of biomarkers. However, inherent disadvantages of immuno-PCR assays limit their application as rapid and sensitive detection method in clinical settings. With advances in nanomaterials, nanoparticles-based immunoassays have been widely used to improve the sensitivity and simplicity of traditional immunoassays. Owing to facile synthesis, surface functionalization, and superior optical and electronic properties, gold nanoparticles have been at the forefront of sensing and detection technologies and have been extensively studied to improve the efficacies of immunoassays. This review provides a brief history of immuno-PCR assays and specifically focuses on the role of gold nanoparticles to improve the sensitivity and specificity of ELISA, PCR and immuno-PCR assays.

Surface Siloxane-Modified Silica Materials Combined with Metal-Organic Frameworks as Novel MALDI Matrixes for the Detection of Low-MW Compounds

Surface siloxane (3-aminopropyl triethoxysilane hydrolyzates)-modified silica materials were used as "initiators", which resulted in the release and desorption of intact molecules adsorbed on the surface of a matrix. A covalently cross-linked MIL-53(Al) material was used to enhance the ionization of analytes. Herein, we have provided an efficient matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF MS) matrix strategy, which responded to both ion and laser irradiation with low background interference in the low-molecular-weight (MW) region. The matrixes MIL-53(Al), SBA-15@APTES, SiO₂@APTES, SBA-15@APTES@MOF, and SiO₂@APTES@MOF were synthetized and used for the analysis of a series of low-MW compounds to verify the effectiveness of the strategies. Compared to conventional matrixes, the surface-modified SBA-15@APTES@MOF and SiO₂@APTES@MOF had low background, high sensitivity, extensive applicability, good stability, and ultrahigh tolerance of salt concentrations. The detection limits of standard analytes were determined to range from 0.1 to 1 × 10^-5 mg/mL for 16 amino acids as well as citric acid, reserpine, tetraethylammonium chloride, melamine, bisphenol A, and malachite green. These results could help in designing more efficient nanostructure-initiator materials and further promote the application of MALDI-TOF MS.

Fluorescence detection of malachite green in fish tissue using red emissive Se,N,Cl-doped carbon dots

Facile detection of malachite green (MG), a toxic dye, in aquaculture is urgently demanded for environment and food safety. Herein, we design a novel fluorescent probe, namely red emissive Se,N,Cl-doped carbon dots (CDs), to accurately determinate MG. CDs are prepared by hydrothermal treatment of selenourea and o-phenylenediamine in HCl solution. This material exhibits excitation-independent dual emissions at 625 and 679 nm, with a high quantum yield of 23.6%. A selective and sensitive fluorescent sensor toward MG is established based on inner filter effect, because both the excitation and emission light of CDs can be strongly absorbed by MG. The fluorescence quenching of CDs is linear to the MG concentration over the range of 0.07-2.50 μM with a low detection limit of 21 nM. Trace-level analysis of MG in fish tissue is successfully explored, demonstrating the great potential of the proposed sensor for MG monitoring in aquatic products.

Study on the Assembly Structure Variation of Cetyltrimethylammonium Bromide on the Surface of Gold Nanoparticles

In this work, the self-assembly behavior of cetyltrimethylammonium bromide (CTAB) on the surface of citrate-capped gold nanoparticles (AuNPs) in solution has been studied by UV-vis absorption spectroscopy, fluorescence probe techniques, ζ potentiometric methods, transmission electron microscopy, etc. The UV-vis spectra show that the color with the increase of CTAB for the mixture containing CTAB and a given amount of AuNPs changes from red to blue and then to red. The absolute value of ζ potential corresponding to this color change decreases initially and then increases. Specially, the reversible color change, from red to blue and then to red, could be observed only in the case of a gradual addition of a AuNP solution to a CTAB solution; however, this reversible change is not suitable for the mixture formed in a reverse order of mixing. The results from pyrene used as the fluorescence probe indicate that the features in the fluorescence spectrum (including fluorescence quenching, I ₁/I ₃, and the excimer) well correspond to those from the UV-vis spectrum mentioned above. Based on the experimental results, the mechanism of the assembly structure variation of CTAB on the surface of negatively charged AuNPs was proposed. For a given amount of AuNPs, the assembly structure of CTAB on the surface of AuNPs undergoes the transformation from a monolayer to a bilayer with the increase of CTAB. In the case of the concentration of CTAB far beyond its critical micelle concentration (CMC) and the higher ratio of CTAB and AuNPs, there is a possibility of the formation of an extra micellar structure only after the formation of a double-layer structure.