Carbon quantum dots doped with phosphorus and nitrogen are a viable fluorescent nanoprobe for determination and cellular imaging of vitamin B12 and cobalt(II)

Synthesis of Yellow Fluorescence Carbon Dots for the Applications of Vitamin B12 Detection and Cell Imaging

In this work, bright yellow fluorescent and multifunctional carbon dots (N-CDs) were prepared by hydrothermal method from O-phenylenediamine and 4-aminobenzoic acid. The fluorescence characterization showed that the N-CDs possessed good optical properties (QY = 32%) and excitation dependent multi-color emission. By exciting with 390 nm, the strong selective interaction of VB12 with N-CDs could result in a sharp decrease in the luminescence of N-CDs at 567 nm. An efficient fluorescence sensor in aqueous solution was constructed which could linearly respond VB12 in wide concentration ranges of 0-90 μM and 140-250 μM. The linear correlation coefficients of N-CDs and VB12 were 0.9950 and 0.9968, respectively, and the detection limit was 0.119 μM. N-CDs were performed for sensitive determination of VB12 in real samples. Moreover, the N-CDs were exploited to image cell. This N-CDs was a sensitive fluorescence probe to monitor VB12 and presented prospective potential in living cells imaging.

A Time-Resolved Fluorescent Microsphere Immunochromatographic Assay for Determination of Vitamin B12 in Infant Formula Milk Powder

Vitamin B12 (VB12) is an important nutrient, and its quality control in food is crucial. In this study, based on the principle of specific recognition of target analyte by monoclonal antibodies (mAbs), a time-resolved fluorescent microsphere immunochromatographic assay (TRFM-ICA) was developed to detect the content of VB12 in infant formula milk powder. First, the performance of the anti-VB12 mAb was evaluated, revealing a half-maximal inhibitory concentration of 0.370 ng/mL, an affinity constant of 2.604 × 109 L/mol and no cross-reactivity with other vitamins. Then, a highly sensitive TRFM-ICA was developed, with a visual limit of detection of 10 μg/kg and a cut-off value of 100 μg/kg for qualitative detection and a detection range of 4.125-82.397 μg/kg for quantitative detection. In addition, the test results of real samples were consistent with the results of quantification using microbiological methods, with a coefficient of variation of less than 10%, showing good accuracy and stability, and confirming that the TRFM-ICA is suitable for the analysis of VB12 in real infant formula milk powder samples. In this study, based on the principle of specific recognition of VB12 by monoclonal antibodies (mAbs) against VB12, a time-resolved fluorescence microsphere immunochromatographic assay (TRFM-ICA) was developed to detect the content of VB12 in infant formula by converting biological signals into optical signals.

Fabrication of Highly Fluorescent Nitrogen and Phosphorus Dual-Doped Carbon Dots for Selective Sensing of Rutin

Based on nitrogen and phosphorus co-doped carbon dots (NP-CDs), a direct, quick, and selective sensing probe for fluorometric detection of rutin has been developed. Utilizing ethylene diamine tetra acetic acid (EDTA) as a carbon and nitrogen source and diammonium hydrogen phosphate (NH4)2HPO4 as a nitrogen and phosphorus source. The NP-CDs were synthesized in less than 3 min with a straightforward one-step microwave pyrolysis process with a high quantum yield (63.8%). After being excited at λ = 360 nm, the produced NP-CDs displayed a maximum bluish fluorescence at λem of 420 nm. Rutin quenched the fluorescence of the produced NP-CDs based on the inner filter effect and static quenching processes. Along with the International Council of Harmonization (ICH) requirements, the developed spectrofluorometric method was validated. The linearity range was 0.50-35.00 μg/mL of rutin. The developed NP-CDs were successfully employed to determine rutin concentrations in marketed tablets. The developed method is quick, simple, consistent, sensitive, and selective, and it does not require expensive chemicals or specialized instruments. This study paves the path for future application of NP-CD in pharmaceutical analysis.

Development of silver-doped carbon dots sensor derived from lignin for dual-mode fluorometric and spectrophotometric determination of valsartan in a bulk powder and a commercial product

Doping of carbon dots (CDs) with heteroatoms has garnered growing attention in recent years as a useful method of controlling their physicochemical properties. In this study, a new dual-mode sensor based on silver-doped CDs (AgCDs) derived from lignin was developed for fluorometric and spectrophotometric determination of valsartan (VAL). The analysis of AgCDs revealed a structure that closely resembled graphene oxide, with the successful doping of Ag. The mean particle size of AgCDs was 3.50 ± 0.89 nm and it exhibited a reasonable fluorescence quantum yield of 28.1 %. The emission at 612 nm of AgCDs is quenched by VAL after being excited at 275 nm due to a combination of dynamic and static quenching mechanisms. The enhancement in the absorbance of AgCDs upon the addition of the medication was measured at 275 nm. The most favorable circumstances for the dual-mode sensing were achieved with a pH of 8 and a volume of 0.10 mL of AgCDs. The measurements were conducted using fluorometry after 3 min at 10 °C, followed by spectrophotometry after 7 min at 20 °C. The fluorometric data indicated a linear response within the range of 2.0-50.0 μg/mL, while the spectrophotometric results showed a dynamic range of 5.0-100.0 μg/mL. The limits of detection (LODs) were 0.57 and 1.38 μg/mL for the fluorometric and spectrophotometric methods, respectively. The limits of quantification (LOQs) were 1.72 and 4.19 μg/mL for the fluorometric and spectrophotometric methods, respectively. The nano sensor efficiently assessed the presence of VAL in pharmaceutical tablets and produced a favorable outcome with the mean of recovery of 98.91 % and 99.76 % with relative standard deviation (RSD%) of 0.79 and 0.78 for the fluorometric and spectrophotometric methods, respectively.

A Dual-Mode Spectrophotometric and Fluorescent Probe Based on Lignin-Derived Carbon Dots for the Detection of Atorvastatin Calcium in a Bulk Powder and a Commercial Product

Recently, dual-mode techniques have garnered considerable attention and have been shown to be effective approaches for biomedical analysis and environmental monitoring. A novel and simple dual-mode spectrophotometric and fluorometric probe based on lignin-derived carbon dots (LCDs) was developed to detect atorvastatin calcium (ATS) in a bulk powder and its commercial product. The synthesized LCDs exhibit exceptional fluorescence characteristics and are highly soluble in water while maintaining reasonable stability. The average particle size of the LCDs was 3.42 ± 1.03 nm. The characterization of the produced LCDs indicated a structure resembling graphene oxide with the presence of several functional groups. The developed LCDs show a good fluorescence quantum yield of 32.2%. The fluorescence of the LCDs is quenched by ATS at an emission wavelength of 315 nm after excitation at 275 nm through dynamic and static quenching mechanisms. The optimal reaction conditions for the dual-mode reaction were a pH of 9 and 0.05 mL of the LCDs, which were measured after 3 min at 30 °C by spectrophotometry, followed by 7 min at 20 °C by fluorometric methods. According to the spectrophotometric results, the response of ATS was linear in the range of 4.0-100.0 µg/mL, while according to the fluorometric results, the dynamic range was 3.0-50.0 µg/mL. The limits of detection (LODs) and the limits of quantification (LOQs) were 0.97 µg/mL and 2.95 µg/mL for the fluorometric method, respectively. The nanoprobe effectively analyzed ATS in medication samples and yielded good results.

Advances in Fluorescent Nanosensors for Detection of Vitamin B12

Vitamin B12 plays a significant role in maintaining human health. Deficiency or excess intake of vitamin B12 may cause some diseases. Therefore, it is significant to fabricate sensors for sensitive assay of vitamin B12. In the past few years, a variety of nanomaterials have been developed for the fluorescence detection of vitamin B12 in tablets, injection, human serum and food. In the review, the assay mechanisms of fluorescent nanomaterials for sensing vitamin B12 were first briefly discussed. And the progress of various nanomaterials for fluorescence detection of vitamin B12 were systematically summarized. Furthermore, the sensing performance of fluorescent nanosensors was compared with fluorescent probes. Lastly, the challenges and perspectives about the topic were presented.

High luminescent N,S,P co-doped carbon dots for the fluorescence sensing of extreme acidity and folic acid

Carbon dots are popular luminescent materials because of their excellent fluorescence properties, but the low quantum yield limits their application. Heteroatom doping is a more convenient and popular approach to increase the quantum yield of carbon dots. Here, novel N,S,P heteroatom co-doped carbon dots (N,S,P-CDs) were synthesized by a simple one-step hydrothermal method using m-phenylenediamine, L-cysteine and phosphoric acid as raw materials. The as-prepared N,S,P-CDs showed excellent photoluminescence properties with a fluorescence quantum yield of up to 41%, which greatly encourages their application in fluorescence sensing. The N,S,P-CDs exhibited good fluorescence stability under salt solution, xenon lamp irradiation and ultraviolet lamp irradiation except for a high sensitivity to extreme acidity. The fluorescence intensity of the N,S,P-CDs can be decreased by as much as 85% when the pH of the solution changes from 2.50 to 4.75, that is, a small fluctuation in pH can cause an intense response of the fluorescence of the N,S,P-CDs. Therefore, an excellent fluorescence sensing platform for accurately monitoring the pH of extreme acidity has been constructed. In addition, the N,S,P-CDs can be applied for quantitative detection of folic acid based on the strong quenching effect of folic acid on the fluorescence of the N,S,P-CDs. Good linearity was obtained in the concentration range of 4.85-82.45 μM, with a detection limit of 0.148 μM. The constructed sensing platform was used for the determination of folic acid in actual samples of orange juice, oatmeal and tablets with satisfactory results.

Fabrication of P and N Co-Doped Carbon Dots for Fe3+ Detection in Serum and Lysosomal Tracking in Living Cells

Doping with heteroatoms allows the retention of the general characteristics of carbon dots while allowing their physicochemical and photochemical properties to be effectively modulated. In this work, we report the preparation of ultrastable P and N co-doped carbon dots (PNCDs) that can be used for the highly selective detection of Fe³⁺ and the tracking of lysosomes in living cells. Fluorescent PNCDs were facilely prepared via a hydrothermal treatment of ethylenediamine and phytic acid, and they exhibited a high quantum yield of 22.0%. The strong coordination interaction between the phosphorus groups of PNCDs and Fe³⁺ rendered them efficient probes for use in selective Fe³⁺ detection, with a detection limit of 0.39 μM, and we demonstrated their practicability by accurately detecting the Fe³⁺ contents in bio-samples. At the same time, PNCDs exhibited high lysosomal location specificity in different cell lines due to surface lipophilic amino groups, and real-time tracking of the lysosome morphology in HeLa cells was achieved. The present work suggests that the fabrication of heteroatom-doped CDs might be an effective strategy to provide promising tools for cytology, such as organelle tracking.

Quantum dot synthesis from waste biomass and its applications in energy and bioremediation

Quantum dots (QDs) are getting special attention due to their commendable optical properties and applications. Conventional metal-based QDs have toxicity and non-biodegradability issues, thus it becomes necessary to search for renewable precursor molecules for QDs synthesis. In recent years, biomass-based carbon rich QDs (CQDs) have been introduced which are mainly synthesised via carbonization (pyrolysis and hydrothermal treatment). These CQDs offered higher photostability, biocompatibility, low-toxicity, and easy tunability for physicochemical properties. Exceptional optical properties become a point of attraction for its multifaceted applications in various sectors like fabrication of electrodes and solar cells, conversion of solar energy to electricity, detection of pollutants, designing biosensors, etc. In recent years, a lot of work has been done in this field. This article will summarize these advancements along in a special context to biomass-based QDs and their applications in energy and the environment.

Nicotinamide-Functionalized Carbon Quantum Dot as New Sensing Platform for Portable Quantification of Vitamin B12 in Fluorescence, UV-Vis and Smartphone Triple Mode

Development of an efficient, portable and simple nanosensor-based systems with reliable analytical performance for on-site monitoring of vitamin B12 (VB12) are still major problems and a challenging work for quality control of manufacturers. Herein, a new fluorescence, UV-Vis and smartphone triple mode nanosensors were designed for the simultaneous detection of VB12 with high sensitivity and accuracy. A novel nanosensor was synthesized through nicotinamide-functionalizing of carbon quantum dot (NA-CQDs) by an one-step microwave-assisted method with green approach. The NA-CQDs sensor showed excellent fluorescence properties and wide linear ranges from 0.1-60 µM with the detection limits of 31.7 nM. Moreover, color changes of NA-CQDs induced by the VB12 could also be detected by UV-Vis spectrophotometer and inhouse-developed application installed on smartphone as a signal reader, simultanusly. The Red, Green and Blue (RGB) intensities of the colorimetric images of NA-CQDs/VB12 system which taken by smartphone's camera converted into quantitative values by the application. A smartphone-integrated with NA-CQDs as colorimetric sensing platform displays good linear ranges (4.16 to 66.6 μM) for on-site determination of VB12 with detection limit of 1.40 μM. The method was successfully applied in the determination of VB12 in complex pharmaceutical supplement formulations without any sample pre-treatment and matrix interfering effects. The recovery results (96.52% to 105.10%) which were in agreement with the reference methods, demonstrating the capability of the smartphone-assisted colorimetric sensing platform in many on-site practical applications of quality controls.

Synthesis and Characterization of a Novel Heterocyclic Schiff Base and Development of a Fluorescent Sensor for Vitamin B12

A heterocyclic Schiff base (MPDPI)was synthesized by the condensation reaction of 1-phenylisatin with 4,5-dimethylphenylene diamine. It was characterized by using spectroscopic methods including UV visible, Infrared, 1H-NMR, 13C-NMR and mass spectrometry. It acts as the fluorescent probe for the detection of Vitamin B12 (Vit.B12) which shows high selectivity over other species via dynamic quenching mechanism. It is also highly sensitive towards Vit.B12 with a detection limit of [Formula: see text]M and showed a linear concentration ranging from [Formula: see text] to [Formula: see text]. Effect of other coexisting species was also studied. The satisfactory results were also obtained in real samples.Since, there are only few reports on Vit.B12, development of selective fluorescent probes for Vit.B12 would be worthwhile.

Bipyridine-linked three-dimensional covalent organic frameworks for fluorescence sensing of cobalt(II) at nanomole level

A novel fluorometric method based on bipyridine-linked three-dimensional covalent organic frameworks (COFs) was developed for the determination of Co²⁺. The COFs were synthesized by the polyreaction of tetrakis(4-aminophenyl)methane (TAPM), 2,2'-bipyridine-5,5'-diamine (Bpy), and 4,4'-biphenyldicarboxaldehyde (BPDA) under solvothermal conditions. The fluorescence of the COFs, with excitation/emission peaks at 324/406 nm, is quenched by Co²⁺. Under the optimal conditions, the fluorescence quenching degrees (F₀-F) of the resulted COFs linearly enhance as the concentrations of Co²⁺ increase in the range 0.01 to 0.25 μM, and a limit of detection of 2.63 nM is achieved. The fluorescence response mechanism was discussed in detail. This proposed approach has also been successfully employed to determine Co²⁺ in complex samples (shrimp and tap water), and satisfactory recoveries (88.1 ~ 109.7%) was obtained. The relative standard deviations are below 4.9%.

Facile synthesis of orange fluorescence multifunctional carbon dots for label-free detection of vitamin B12 and endogenous/exogenous peroxynitrite

In this work, orange emission fluorescent multifunctional carbon dots (O-CDs) were designed for the label-free detection of vitamin B₁₂ (VB₁₂)，endogenous/exogenous peroxynitrite (ONOO^-) sensing, cell imaging, and fluorescent flexible film preparation. The O-CDs with excitation-independent were prepared using safranine T and ethanol as precursors via one-step hydrothermal process. VB₁₂ was utilized as a quencher to quench the fluorescence of O-CDs due to the internal filtration effect (IFE). Two-segment linear ranges are 1-65 μM and 70-140 μM, and the detection limit was calculated as 0.62 μM. Besides, ONOO^- can reduce the fluorescence intensity of O-CDs based on static quenching (SQ). The linear ranges are 0.3-9 μM and 9-48 μM, and the detection limit was 0.06 μM. Moreover, the O-CDs were exploited as a cellular imaging reagent for intracellular VB₁₂ and endogenous/exogenous ONOO^- imaging owing to its great biocompatibility, low toxicity and strong photostability. These results indicate that O-CDs have the potential to be used as a sensitive fluorescence probe to rapidly monitor VB₁₂ and endogenous/exogenous ONOO^- with high selectivity in living cells. Also, the as-proposed O-CDs can be employed to fabricate O-CDs/PVA composites as fluorescent flexible films. All of the above prove that the O-CDs present great prospect in multiple applications such as biosensing, cellular labeling, biomedical optical imaging, and fluorescent films.

Effects of exogenous vitamin B12 on nutrient removal and protein expression of algal-bacterial consortium

Chlorella vulgaris and Bacillus licheniformis consortium was added to synthetic wastewater with exogenous vitamin B₁₂. In the presence of 100 ng/L vitamin B₁₂, removal efficiencies of TN, NH₃-N, PO₄^3-P, and COD were 80.1%, 76.8%, 87.9%, and 76.7%, respectively. The functional groups on the cell surface of the consortium, including -NH, -CH₃, C=O, C=C, and P-O-C, increased with 100 ng/L vitamin B₁₂. These functional groups improved the biological adsorption of the consortium; however, higher concentrations of vitamin B₁₂ resulted in an occlusion of the functional groups. Furthermore, there were 5 significantly enriched protein pathways, namely carbon fixation in photosynthetic organisms; amino acid metabolic pathways; the pathway of one carbon pool by folate; nitrogen metabolism; and photosynthesis. Most proteins in these pathways were upregulated, which enhanced carbon fixation and photosynthesis in the algal cells. Simultaneously, B₁₂ promoted significant upregulation of proteins associated with the quorum-sensing pathway, which promoted the interaction between algae and bacteria.

Current Nanocarrier Strategies Improve Vitamin B12 Pharmacokinetics, Ameliorate Patients' Lives, and Reduce Costs

Vitamin B12 (VitB12) is a naturally occurring compound produced by microorganisms and an essential nutrient for humans. Several papers highlight the role of VitB12 deficiency in bone and heart health, depression, memory performance, fertility, embryo development, and cancer, while VitB12 treatment is crucial for survival in inborn errors of VitB12 metabolism. VitB12 is administrated through intramuscular injection, thus impacting the patients’ lifestyle, although it is known that oral administration may meet the specific requirement even in the case of malabsorption. Furthermore, the high-dose injection of VitB12 does not ensure a constant dosage, while the oral route allows only 1.2% of the vitamin to be absorbed in human beings. Nanocarriers are promising nanotechnology that can enable therapies to be improved, reducing side effects. Today, nanocarrier strategies applied at VitB12 delivery are at the initial phase and aim to simplify administration, reduce costs, improve pharmacokinetics, and ameliorate the quality of patients’ lives. The safety of nanotechnologies is still under investigation and few treatments involving nanocarriers have been approved, so far. Here, we highlight the role of VitB12 in human metabolism and diseases, and the issues linked to its molecule properties, and discuss how nanocarriers can improve the therapy and supplementation of the vitamin and reduce possible side effects and limits.

Ratiometric fluorescent sensors for sequential on-off-on determination of riboflavin, Ag+ and l-cysteine based on NPCl-doped carbon quantum dots

The fluorescent sensor, especially ratiometric fluorescent sensor, is one of the most important applications for CQDs, which is becoming a research hotspot. Herein, carbon quantum dots co-doped with nitrogen, phosphorus and chlorine (NPCl-CQDs) were synthesized by acid-base neutralization reaction exothermic carbonization method. The as-fabricated NPCl-CQDs could emit blue fluorescence and possess excellent fluorescence properties. Based on the FRET, multifunctional and ratiometric fluorescent sensors for "on-off-on" sequential determination of riboflavin, Ag⁺, and Cys with good selectivity and high sensitivity were established. The linear range of riboflavin, Ag⁺, and Cys are 0.50-10.18 μM and 15.89-27.76 μM, 0.66-1.46 mM and 1.50-4.20 mM, and 0.01-0.15 μM and 0.15-0.36 μM with the limit of detection of 3.50 nM, 26.38 μM, and 0.96 nM, respectively. Furthermore, the sensors were successfully used to determine riboflavin, Ag⁺, and Cys in tablets, river water, and human urine with the recoveries of 95.2-104.0%, 95.6-102.0%, and 94.8-106.4%, respectively. More importantly, the as-constructed "on-off-on" NPCl-CQDs-based ratiometric fluorescent sensors were applied for detecting riboflavin, Ag⁺, and Cys in HeLa cells with satisfying results. The finding of this study shows the feasibility and effectiveness of the NPCl-CQDs as the available ratiometric fluorescent sensors for the determination of riboflavin, Ag⁺, and Cys in real samples and living cells.

A one-pot synthesis of fluorescent N,P-codoped carbon dots for vitamin B12 determination and bioimaging application

N,P-codoped carbon dots were synthesised using l-arginine and phosphoric acid and explored for the detection of vitamin B₁₂ (VB₁₂) and bioimaging.

Facile Fluorescence Dopamine Detection Strategy Based on Acid Phosphatase (ACP) Enzymatic Oxidation Dopamine to Polydopamine

Facile and effective detection of dopamine (DA) plays a significant role in current clinical applications. Substantially, special optical nanomaterials are important for fabricating easy-to-control, cheap, selective, and portable fluorescence DA sensors with superior performance. Herein, carbon dots (CDs) prepared from melting method were applied as signal to establish a simple but effective fluorescence strategy for DA determination based on the enzymatic activity of acid phosphatase (ACP), which induces DA to form polydopamine (pDA). The formed pDA caused by the enzymatic oxidization of ACP toward DA can interact with CDs through the inner filter effect. Such behavior effectively quenched the CDs' fluorescence. The degree of fluorescence quenching of CDs was positively correlated with the DA content. Under the optimized reaction conditions, the proposed fluorescence method exhibited a comparable analytical performance with other DA sensors with good selectivity. Furthermore, this method has been successfully applied to detect DA in DA hydrochloride injection and human serum samples. It shows that this method features potential practical application value and is expected to be used in clinical research.